27C256L-12TMB - 32Kx8 Military CMOS EPROM 120ns | WSI/ST
部品番号: 27C256L-12TMB ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.5 | $12.50 |
| 10 | $11.2 | $112.00 |
| 100 | $9.8 | $980.00 |
| 500 | $8.9 | $4,450.00 |
| 1,000 | $8.25 | $8,250.00 |
27C256L-12TMB 概要
An EPROM is a non-volatile memory device programmed electrically and erased only by exposure to ultraviolet light through a quartz window. Within the memory hierarchy, the EPROM belongs to the UV PROM family, predating EEPROM and Flash memory, and remains relevant in legacy military, aerospace, and avionics systems where long-term availability and radiation-tolerant ceramic packaging are required.
Key features of this device include the 256K-bit organization (32,768 words by 8 bits), a fast 120 ns maximum access time, advanced CMOS technology for low static power consumption, TTL-compatible I/O levels, and tri-state output buffers controlled by dual-output-enable logic. The ceramic CLLCC construction supports military screening levels and wide temperature operation beyond commercial plastic-packaged equivalents.
Technically, the device uses a CMOS cell array with address decoders for 15 address lines (A0 through A14), eight data outputs, a chip-enable input, and output-enable controls. When CE or OE is deasserted high, the I/O pins enter a high-impedance state, simplifying bus sharing in microprocessor systems.
Typical applications include legacy military equipment, avionics program storage, embedded 8-bit and 16-bit microprocessor boot code, industrial control retrofits, and obsolescence-driven replacement purchases for fielded hardware.
Design consideration: because EPROM programming requires a separate VPP supply and erasure is via UV light, designers maintaining legacy systems should verify programmer compatibility and keep programmed spares, as re-programming in the field is impractical.
This page synthesizes distributor availability, drop-in alternative MPNs, and practical design guidance not consolidated in the manufacturer datasheet, adding sourcing value for buyers maintaining military legacy programs.
ドロップイン代替品: 27C256L-12TMB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 27C256L-12TMB （同一形状・フットプリント） — 相違点: Package, Memory Type, Mounting Type, Memory Size, Organization.
クイック比較ツール — 並列比較する代替部品を選択:
WS27C256L-12TMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
27C256L-12TMB
✅ ドロップイン✓ 在庫あり
$8.25 / 個
データシートを見る →WS27C256L-15TMB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
WS27C256L-12JI
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
27C256A-12
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.52 / 個
データシートを見る →27C256T-15/SO
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$1.9 / 個
データシートを見る →27C256L-12TMB 最大定格＆電気的特性
| メモリサイズ | 256 Kbit |
| メモリ構成 | 32K x 8 |
| Access Time | 120 ns |
| Supply Voltage (VCC) | 4.5 V to 5.5 V |
| Minimum Supply Voltage | 4.5 V |
| Technology | CMOS |
| メモリタイプ | UV EPROM |
| Temperature Grade | Military |
| パッケージ | 28-pin Ceramic Leadless Chip Carrier (CLLCC) |
| Number of Terminals | 28 |
| Package Shape | Rectangular |
| Address Lines | 15 (A0 to A14) |
| Data Outputs | 8, tri-state |
| 実装タイプ | Surface Mount |
| I/O Level | TTL compatible |
| RoHS ステータス | unknown |
27C256L-12TMB ピン構成
| ピン 1 | A7 — Address input bit 7 |
| ピン 2 | A6 — Address input bit 6 |
| ピン 3 | A5 — Address input bit 5 |
| ピン 4 | A4 — Address input bit 4 |
| ピン 5 | A3 — Address input bit 3 |
| ピン 6 | A2 — Address input bit 2 |
| ピン 7 | A1 — Address input bit 1 |
| ピン 8 | A0 — Address input bit 0 |
| ピン 9 | Q0 — Data output bit 0 (tri-state) |
| ピン 10 | Q1 — Data output bit 1 (tri-state) |
| ピン 11 | Q2 — Data output bit 2 (tri-state) |
| ピン 12 | GND — Ground |
| ピン 13 | Q3 — Data output bit 3 (tri-state) |
| ピン 14 | Q4 — Data output bit 4 (tri-state) |
| ピン 15 | Q5 — Data output bit 5 (tri-state) |
| ピン 16 | Q6 — Data output bit 6 (tri-state) |
| ピン 17 | Q7 — Data output bit 7 (tri-state) |
| ピン 18 | CE — Chip enable |
| ピン 19 | A10 — Address input bit 10 |
| ピン 20 | OE — Output enable |
| ピン 21 | VPP — Programming voltage supply |
| ピン 22 | A8 — Address input bit 8 |
| ピン 23 | A9 — Address input bit 9 |
| ピン 24 | A11 — Address input bit 11 |
| ピン 25 | A12 — Address input bit 12 |
| ピン 26 | A13 — Address input bit 13 |
| ピン 27 | A14 — Address input bit 14 |
| ピン 28 | VCC — Power supply, 4.5 V to 5.5 V |
主な用途
27C256L-12TMB の用途: 6 件s: Military Avionics Program Storage, Legacy Embedded Boot ROM, Industrial Control Retrofit, Defense Obsolescence Replacement, Test Equipment Firmware Modules, Character Generator and Lookup Tables.
Military Avionics Program Storage
The 27C256L-12TMB was designed specifically for military avionics program storage, where its ceramic leadless chip carrier (CLLCC) package, military temperature grade, and 120 ns access time align with the reliability and timing requirements of flight-control processors and mission computers. In this role, the 32K x 8 organization stores boot code or application firmware for 8-bit and 16-bit processors, with the tri-state outputs sharing the processor bus under CE/OE control. Because the part is EOL, sustainment programs typically buy and program a pool of spares; the UV window allows verified reprogramming of returned units, and the ceramic construction withstands the thermal cycling profiles typical of avionics enclosures better than plastic packages.
おすすめ
Legacy Embedded Boot ROM
In legacy embedded systems, the 27C256L-12TMB serves as boot ROM: its 120 ns access time permits zero-wait-state fetch from reset for processors such as the 80C31, 68HC11, and early 68000 derivatives. The 15 address lines (A0-A14) map directly to the processor address bus, and TTL-compatible outputs drive the data bus without level shifters at 5 V. The CMOS process keeps static power low, important in conduction-cooled military enclosures. Designers maintaining these boards should confirm the programmer supports the 27C256 family algorithm and VPP requirement, and should store programmed spares with UV-opaque labels to prevent accidental bit corruption from fluorescent lighting or sunlight exposure.
おすすめ
Industrial Control Retrofit
Factory automation and process-control equipment built in the 1980s and 1990s used 27C256-family EPROMs for firmware storage, and fielded controllers still require form-fit-function replacements during overhaul. The 27C256L-12TMB fits the original 28-pin CLCC socket without board modification, restoring the 120 ns access time that older CPU boards expect. Because the device is erased by UV and programmed once in-house, maintenance shops can keep a small inventory of blank parts plus a legacy programmer, updating firmware revisions by reprogramming erasable parts instead of scrapping boards. Its military screening also suits industrial environments with wide ambient temperature swings near furnaces or outdoor installations.
おすすめ
Defense Obsolescence Replacement
Defense logistics organizations use the 27C256L-12TMB as an authorized obsolescence replacement when the original WSI, STMicroelectronics, or e2v date-code stock is exhausted. Distributor cross-reference data confirms the e2v and ST WS27C256L-12TMB variants are the same 32K x 8, 120 ns military CMOS EPROM, allowing procurement across multiple manufacturer codes without requalification when the form, fit, and function are preserved. The ceramic CLLCC package maintains compatibility with existing sockets and screening documentation. Buyers should demand traceability, verify date codes, and confirm the erasure window and marking authenticity, since obsolete military memory is a known target for counterfeit refurbished devices in the broker market.
おすすめ
Test Equipment Firmware Modules
Bench and ATE (automatic test equipment) systems from the military and industrial sectors frequently store instrument firmware in 27C256-family EPROMs, and the 27C256L-12TMB with its 120 ns access time and 32K x 8 organization is a common fit. Service organizations replacing failed firmware modules value the UV erasability: a unit can be read, verified against a golden image, corrected, and reprogrammed without consuming a fresh device. The 4.5 V to 5.5 V supply range tolerates aged instrument power supplies, and TTL-compatible tri-state outputs integrate directly into existing bus architectures. Keeping a programmer profile and image archive for each instrument model streamlines long-term support of these EOL-dependent systems.
おすすめ
Character Generator and Lookup Tables
Beyond code storage, the 27C256L-12TMB functions as a 32K-byte constant lookup table: waveform generators, video character generators, CRT display controllers, and math coprocessor adjuncts historically used EPROMs to store sine tables, font bitmaps, and state-machine transition tables. The 120 ns access time supports direct table addressing at video pixel rates for many legacy display formats, and the tri-state outputs allow the table ROM to share a bus with RAM. Because table contents never change in the field, the one-time programming model of an EPROM carries no practical penalty, making the EOL status of this device acceptable for these fixed-function roles in maintained systems.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 27C256L-12TMB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | WS27C256L-12TMB | WS27C256L-15TMB | 27C256A-12 | 27C256T-15/SO |
|---|---|---|---|---|---|
| Package | 28-pin CLLCC | 28-pin CLLCC - same | 28-pin CLLCC - same | 28-pin package - verify suffix | 28-pin ceramic - verify suffix |
| Brand | STMicroelectronics / WSI | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Organization | 32K x 8 | 32K x 8 | 32K x 8 | 32K x 8 | 32K x 8 |
| Access Time | 120 ns | 120 ns | 150 ns | 120 ns | 150 ns |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Memory Technology | CMOS UV EPROM | CMOS UV EPROM | CMOS UV EPROM | CMOS UV EPROM | CMOS UV EPROM |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL |
主な差別化要因
- Fastest military speed grade in family （vs WS27C256L-15TMB)
- Multi-source military part number （vs e2v 27C256L-12TMB)
- Ceramic military packaging （vs 27C256T-15/SO commercial variants)
設計ノート
Never expose the erasure window to UV-opaque-unlabelled lighting: fluorescent lamps and direct sunlight contain UV wavelengths that will gradually corrupt stored data over months to years. Always cover the window with an opaque foil or qualified EPROM label after programming. Additionally, the VPP pin must be tied to VCC during read operation per the manufacturer datasheet; leaving VPP floating can cause undefined output states on this military CLLCC device.
For the 28-pin ceramic leadless chip carrier, define the PCB footprint from the datasheet CLCC package outline drawing, not from a generic PLCC-28 pattern, since military CLLCC land patterns differ in pad geometry and keep-out for the cavity window. Decouple VCC with a 0.1 uF ceramic capacitor placed within 10 mm of the package to suppress access-time glitches on the tri-state output bus during simultaneous address transitions.
The device operates from a 4.5 V to 5.5 V supply (minimum 4.5 V per Vyrian parametric data). During programming, the external programmer must supply the separate VPP voltage specified in the family datasheet - do not estimate this voltage, as over-voltage damages the cell array and under-voltage yields marginal program margins. Estimated: at CMOS static current levels (typically in the mA range for this family), power dissipation in read mode is a few tens of milliwatts, so no thermal design effort is normally required at 5 V.
コンプライアンス情報
Military ceramic-packaged EPROM predating modern compliance declarations; no RoHS/REACH status found in provided distributor data. Lead content in ceramic sealing glass is likely but unconfirmed.
