5CGTFD9A5U19A7N - Cyclone V GT FPGA 301K LE UFBGA-484 | Intel
部品番号: 5CGTFD9A5U19A7N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $337.3 | $337.30 |
| 10 | $314.5 | $3,145.00 |
| 100 | $289.2 | $28,920.00 |
| 500 | $262 | $131,000.00 |
| 1,000 | $241.5 | $241,500.00 |
5CGTFD9A5U19A7N 概要
An FPGA (Field-Programmable Gate Array) is a semiconductor device built from a matrix of configurable logic blocks (CLBs), embedded memory blocks, DSP blocks, and programmable routing, all controlled by a customer-loaded bitstream. FPGAs occupy the hierarchy of programmable logic devices -> logic ICs -> integrated circuits, offering hardware-level parallelism and reprogrammability that microcontrollers and ASICs cannot. The 5CGTFD9A5U19A7N belongs to the Cyclone V GT sub-family, which adds high-speed transceivers on top of the Cyclone V E architecture.
Key features include 156 18x18 multipliers, 4 PLLs, 2 hard memory controllers, and embedded PCIe Gen2 x1/x2/x4 controllers. The 484-pin UFBGA package supports high-density board designs with industrial-grade -40C to +125C junction operation, suitable for harsh-environment deployments. The 'A7N' suffix denotes the speed grade and lead-free RoHS-compliant shipping form.
Cyclone V GT devices use a heterogeneous architecture that pairs general-purpose FPGA fabric with dedicated transceiver and PCIe hard IP, lowering power versus soft-IP implementations. The 1.1 V core voltage and 28 nm process enable sub-1 W typical power at moderate logic utilization, while integrated transceivers remove the need for external PHY chips.
Typical applications include industrial machine vision, motor control and drives, software-defined radio, video bridging and capture, low-cost wireline backplanes, and PCIe endpoint cards. The transceiver-rich GT variant is particularly attractive when designers need 1 Gbps to 3.125 Gbps links without the cost of a Cyclone V GX/GTX or Stratix class device.
Designers should consult the Cyclone V Device Handbook for transceiver channel placement rules (the GT family supports up to 9 transceiver channels per device, with specific bank restrictions), PCB microstrip/stripline design for 3.125 Gbps links, and Quartus Prime tool version compatibility (Quartus Prime Standard / Pro 18.1 or later is generally recommended for Cyclone V).
This page synthesizes current distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet. Pricing data references are stated as of 2026-09-05.
ドロップイン代替品: 5CGTFD9A5U19A7N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5CGTFD9A5U19A7N （同一形状・フットプリント） — 相違点: Package, Transceivers, Family, Logic Elements, Operating Temperature.
クイック比較ツール — 並列比較する代替部品を選択:
5CGTFD9C5U19A7N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGTFD7D5F27I7N
✅ ドロップイン✓ 在庫あり
$218.4 / 個
データシートを見る →5CGTFD9D5F27C7N
✅ ドロップイン📋 参考代替品（カタログ未掲載）
5CGTFD9A5U19A7N 最大定格＆電気的特性
| Family | Cyclone V GT |
| Logic Elements | 301,000 |
| Embedded Memory | 14,251,008 bits |
| User I/Os | 240 |
| Process Technology | 28 nm TSMC |
| Core Voltage | 1.1 V |
| パッケージ | UFBGA-484 (19 mm) |
| 実装タイプ | Surface Mount |
| Transceivers | Up to 9 channels, up to 3.125 Gbps |
| PCIe Hard IP | Gen2 x1/x2/x4 |
| PLLs | 4 |
| 18x18 Multipliers | 156 |
| Memory Controllers | 2 (hard) |
| 動作温度 | -40C to +125C (Automotive / Industrial Tj) |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
| MSLレベル | 3 (per JEDEC J-STD-020) |
5CGTFD9A5U19A7N ufbga-484 (19 mm) ピン配置ガイド
5CGTFD9A5U19A7N (ufbga-484 (19 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: 5CGTFD9A5U19A7N.
詳細は データシート をご参照ください。
主な用途
5CGTFD9A5U19A7N の用途: 6 件s: Industrial Machine Vision, Motor Control and Industrial Drives, Software-Defined Radio Baseband, Video Bridge and Capture Cards, Low-Cost Wireline Backplane Aggregation, Automotive Telematics and Driver Assistance.
Industrial Machine Vision
The 5CGTFD9A5U19A7N is well suited to industrial machine vision systems because it combines 301K logic elements with 14.25 Mbits of embedded memory and hard PCIe Gen2 IP. The fabric can host real-time image-processing pipelines (Sobel filtering, blob detection, color conversion) while the hard PCIe controller streams results to a host CPU at up to 4 Gbps. With -40C to +125C junction operation, the device tolerates factory-floor thermal stress, and the 240 user I/Os accept parallel image-sensor inputs plus GPIO for trigger and strobe signals, eliminating the need for an external bridge ASIC.
おすすめ
Motor Control and Industrial Drives
The 5CGTFD9A5U19A7N suits multi-axis motor control where deterministic loop rates and high-resolution PWM matter. The 156 dedicated 18x18 multipliers accelerate field-oriented control (FOC) math, while 4 PLLs generate precise switch-mode timing for IGBT and SiC gate drivers. Hard PCIe Gen2 IP simplifies the connection to a host motion controller, and the 9 transceiver channels carry EtherCAT or SERCOS III through external PHYs. The UFBGA-484 package dissipates thermal energy efficiently in sealed industrial enclosures.
おすすめ
Software-Defined Radio Baseband
The 5CGTFD9A5U19A7N is a strong fit for software-defined radio (SDR) baseband processing where moderate logic density meets multi-gigabit sample links. The 9 transceiver channels accept analog-to-digital converter data streams up to 3.125 Gbps (JESD204B-style links via external PHY or LVDS), and 301K logic elements run DDC, channelization, and demodulation blocks. The 14 Mbits of block RAM serve as sample-rate conversion buffers, while hard PCIe Gen2 IP delivers baseband I/Q to a host CPU for upper-layer MAC and protocol processing.
おすすめ
Video Bridge and Capture Cards
The 5CGTFD9A5U19A7N supports video bridge and capture card designs that convert Camera Link, CoaXPress, or HDMI streams into PCIe or 10 GbE packets. The 3.125 Gbps transceivers handle the high-speed serialized video channels, while the hard PCIe Gen2 IP endpoint presents the video data to the host CPU with minimal latency. With 14 Mbits of embedded memory, the FPGA can buffer line-scan data and frame drops without external SDRAM, reducing BOM cost for embedded vision appliances.
おすすめ
Low-Cost Wireline Backplane Aggregation
The 5CGTFD9A5U19A7N suits aggregation nodes in low-cost wireline backplanes where multiple 1 Gbps links terminate at a single fabric. Nine transceiver channels provide up to 28 Gbps of aggregated serial bandwidth, which is sufficient for edge-of-card aggregation and CPRI 3 observation paths. Hard PCIe Gen2 IP plus 240 user I/Os make it easy to bridge the aggregated traffic to a host CPU, and the UFBGA-484 package keeps the design within a 19x19 mm footprint.
おすすめ
Automotive Telematics and Driver Assistance
The 5CGTFD9A5U19A7N's automotive-grade temperature profile (-40C to +125C Tj) and 3.125 Gbps transceiver channels suit automotive telematics, surround-view driver assistance, and front-camera preprocessing ECUs. The 301K logic elements run image rectification and lane-detection algorithms, while the hard PCIe Gen2 IP interfaces to the vehicle's ADAS SoC. The RoHS-compliant UFBGA-484 package is compatible with automotive PCB processes and high-vibration environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5CGTFD9A5U19A7N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5CGTFD9C5U19A7N | 5CGTFD7D5F27I7N | 5CGTFD9D5F27C7N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | UFBGA-484 (U19) | UFBGA-484 (U19) | FBGA-672 (F27) | FBGA-672 (F27) |
| Family | Cyclone V GT | Cyclone V GT | Cyclone V GT | Cyclone V GT |
| Logic Elements | 301,000 | 301,000 | 149,500 | 301,000 |
| Transceiver Channels | 9 | 9 | 9 | 9 |
| Max Transceiver Data Rate | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps | 3.125 Gbps |
| PCIe Hard IP | Gen2 x1/x2/x4 | Gen2 x1/x2/x4 | Gen2 x1/x2/x4 | Gen2 x1/x2/x4 |
| Temperature Grade | Automotive -40C to +125C Tj | Commercial 0C to +85C Tj | Industrial -40C to +100C Tj | Commercial 0C to +85C Tj |
主な差別化要因
- Mid-density Cyclone V GT with full 9-channel 3.125 Gbps transceiver support （vs 5CGTFD7D5F27I7N)
- Automotive-grade temperature profile with same die as commercial U19 （vs 5CGTFD9C5U19A7N)
- Hard PCIe Gen2 IP versus soft-IP implementations （vs Cyclone V E devices)
設計ノート
Transceiver channels on the 5CGTFD9A5U19A7N must be routed on inner stripline layers with controlled 50 ohm differential impedance and length matching within the limits stated in the Cyclone V GT Transceiver User Guide. AC-coupling capacitors are required between the FPGA and the external PHY or connector; place them as close to the receiver pins as the BGA fanout allows. Keep the transceiver analog power planes (VCCR_GXB, VCCT_GXB) isolated from digital switching planes to avoid coupling noise into the 3.125 Gbps PLLs.
Estimated: at full logic utilization with 9 active transceiver channels, the 5CGTFD9A5U19A7N can dissipate 3-5 W. The UFBGA-484 package has a theta-JA around 12-15 C/W on a JEDEC 8-layer test board (per Cyclone V thermal guidelines), producing a 36-75 C temperature rise above ambient. In sealed enclosures, provide thermal vias under the central ball array and a copper spreader or heat spreader to keep Tj below +125 C for automotive-grade operation.
Do not use the 5CGTFD9A5U19A7N 'A' (automotive) OPN in commercial-only designs without confirming the broader temperature profile is acceptable; conversely, the 'C' (commercial) variants may fail in industrial deployments with elevated ambient. Also verify that the Quartus Prime version supports the specific OPN - some legacy Quartus versions (older than 16.0) lack complete Cyclone V GT support. Always regenerate the pin connection guidelines file before board layout.
Use microvia or laser-drilled stacked-via technology for the 0.8 mm pitch BGA fanout to escape the central array. The UFBGA-484 BGA has a 19 x 19 mm body with 22 x 22 ball array; allow a minimum of 4 routing layers between the BGA and the first via. Reference Intel's Cyclone V Board Design Guidelines for recommended stackup and via dimensions.
コンプライアンス情報
RoHS compliance per Altera/Intel product page. The 'A' temperature grade targets automotive profiles but the Cyclone V GT family is not AEC-Q100 qualified in the strict sense; consult Intel for automotive PPAP support. Lead-free and Pb-free terminal finish.
