5M160ZT100I5N - MAX V CPLD, 128 Macro, 100-TQFP | Intel
部品番号: 5M160ZT100I5N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.6 | $5.60 |
| 10 | $5.32 | $53.20 |
| 100 | $4.95 | $495.00 |
| 500 | $4.52 | $2,260.00 |
| 1,000 | $4.1 | $4,100.00 |
5M160ZT100I5N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the broader hierarchy of digital logic ICs (programmable logic -> logic IC -> integrated circuit -> semiconductor). Unlike FPGAs, CPLDs use flash-backed EEPROM configuration cells and deterministic routing, giving them instant-on behavior, predictable timing, and high pin-to-pin performance. They are typically used as glue logic, bus bridges, I/O expanders, and power-up sequencers, complementing ASICs, ASSPs, and FPGAs in mixed-technology designs.
Key features include 160 Logic Elements (LEs), 128 macro cells, 8 Kbits of user flash memory, 1.8 V core voltage with multi-voltage I/O support (1.2 V to 3.3 V LVCMOS/LVTTL), in-system programmability via JTAG (IEEE 1149.1), and an industrial temperature range of -40 °C to +100 °C. The MAX V architecture combines a low-power process with non-volatile configuration, eliminating the need for external boot memory.
The device implements the classic MAX architecture with a Logic Array Block (LAB) structure, Product Term (PT) logic, and a continuous interconnect matrix. Each macro cell contains a programmable AND/OR array followed by a flip-flop, with fast carry chains for arithmetic and dedicated JTAG pins (TMS, TDI, TDO, TCK) for boundary-scan testing. Per the manufacturer datasheet, JTAG pins reside in Bank 1 and their I/O standard is controlled by the VCCIO1 setting.
Typical applications include industrial control and I/O expansion, glue logic for FPGA/ASIC designs, power-sequencing controllers, bus-interface bridges (e.g., I²C to SPI, parallel to serial), consumer electronics, LED display drivers, and automotive infotainment subsystems. The instant-on non-volatile configuration makes it ideal as a companion boot-logic device to FPGAs.
When designing with this part, observe the I/O bank voltage constraints, place decoupling capacitors near every VCCINT and VCCIO pin, and use the Quartus II / Quartus Prime design software for fitting, simulation, and JTAG programming. The 100-pin TQFP variant (suffix T100) provides the broadest I/O count in the 5M160Z family; smaller packages (M68, E64) trade I/O count for board area.
This page synthesizes distributor pricing across DigiKey, Mouser, Arrow, Octopart, and Heisener, drop-in alternatives from the same MAX V family, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: 5M160ZT100I5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5M160ZT100I5N （同一形状・フットプリント） — 相違点: Package, Configuration Memory, MSL Level, Operating Temperature, I/O Supply Voltage (VCCIO).
クイック比較ツール — 並列比較する代替部品を選択:
5M160ZT100C5N
✅ ドロップイン✓ 在庫あり
$4.75 / 個
データシートを見る →5M160ZT100A5N
✅ ドロップイン✓ 在庫あり
$4.9 / 個
データシートを見る →5M160ZT100I5
✅ ドロップイン✓ 在庫あり
$8.75 / 個
データシートを見る →5M160ZT100C4N
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.95 / 個
データシートを見る →5M1270ZT144I5N
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$17.9 / 個
データシートを見る →5M160ZT100I5N 最大定格＆電気的特性
| Family | MAX V |
| Series | 5M160Z |
| Macro Cells | 128 |
| Logic Elements (LEs) | 160 |
| Number of I/O | 79 (max user I/Os) |
| Maximum Internal Frequency | 118.3 MHz |
| Pin-to-Pin Delay (tPD) | 7.5 ns |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage (VCCIO) | 1.2 V to 3.3 V (multi-voltage LVCMOS/LVTTL) |
| User Flash Memory | 8 Kbits |
| パッケージ | 100-pin TQFP (T100) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40 °C to +100 °C (industrial) |
| Programmability | In-system via JTAG (IEEE 1149.1) |
| Configuration Memory | Non-volatile (flash-backed EEPROM) |
| RoHS ステータス | Compliant |
5M160ZT100I5N ピン構成
| ピン 1 | GND — Ground |
| ピン 2 | I/O — User I/O (Bank 1) |
| ピン 3 | I/O — User I/O (Bank 1) |
| ピン 4 | I/O — User I/O (Bank 1) |
| ピン 5 | I/O — User I/O (Bank 1) |
| ピン 6 | I/O — User I/O (Bank 1) |
| ピン 7 | I/O — User I/O (Bank 1) |
| ピン 8 | I/O — User I/O (Bank 1) |
| ピン 9 | I/O — User I/O (Bank 1) |
| ピン 10 | I/O — User I/O (Bank 1) |
| ピン 11 | VCCIO1 — Bank 1 I/O supply voltage |
| ピン 12 | I/O — User I/O (Bank 1) |
| ピン 13 | I/O — User I/O (Bank 1) |
| ピン 14 | I/O — User I/O (Bank 1) |
| ピン 15 | I/O — User I/O (Bank 1) |
| ピン 16 | GND — Ground |
| ピン 17 | I/O — User I/O (Bank 2) |
| ピン 18 | I/O — User I/O (Bank 2) |
| ピン 19 | I/O — User I/O (Bank 2) |
| ピン 20 | I/O — User I/O (Bank 2) |
| ピン 21 | I/O — User I/O (Bank 2) |
| ピン 22 | I/O — User I/O (Bank 2) |
| ピン 23 | I/O — User I/O (Bank 2) |
| ピン 24 | VCCIO2 — Bank 2 I/O supply voltage |
| ピン 25 | I/O — User I/O (Bank 2) |
| ピン 26 | I/O — User I/O (Bank 2) |
| ピン 27 | I/O — User I/O (Bank 2) |
| ピン 28 | I/O — User I/O (Bank 2) |
| ピン 29 | I/O — User I/O (Bank 2) |
| ピン 30 | GND — Ground |
| ピン 31 | I/O — User I/O (Bank 2) |
| ピン 32 | I/O — User I/O (Bank 2) |
| ピン 33 | VCCINT — Core supply voltage (1.8 V) |
| ピン 34 | I/O — User I/O (Bank 2) |
| ピン 35 | I/O — User I/O (Bank 2) |
| ピン 36 | I/O — User I/O (Bank 2) |
| ピン 37 | I/O — User I/O (Bank 2) |
| ピン 38 | I/O — User I/O (Bank 2) |
| ピン 39 | I/O — User I/O (Bank 2) |
| ピン 40 | I/O — User I/O (Bank 2) |
| ピン 41 | I/O — User I/O (Bank 2) |
| ピン 42 | GND — Ground |
| ピン 43 | I/O — User I/O (Bank 3) |
| ピン 44 | I/O — User I/O (Bank 3) |
| ピン 45 | I/O — User I/O (Bank 3) |
| ピン 46 | I/O — User I/O (Bank 3) |
| ピン 47 | I/O — User I/O (Bank 3) |
| ピン 48 | VCCIO3 — Bank 3 I/O supply voltage |
| ピン 49 | I/O — User I/O (Bank 3) |
| ピン 50 | I/O — User I/O (Bank 3) |
| ピン 51 | I/O — User I/O (Bank 3) |
| ピン 52 | I/O — User I/O (Bank 3) |
| ピン 53 | I/O — User I/O (Bank 3) |
| ピン 54 | GND — Ground |
| ピン 55 | I/O — User I/O (Bank 3) |
| ピン 56 | I/O — User I/O (Bank 3) |
| ピン 57 | I/O — User I/O (Bank 3) |
| ピン 58 | I/O — User I/O (Bank 3) |
| ピン 59 | I/O — User I/O (Bank 3) |
| ピン 60 | VCCINT — Core supply voltage (1.8 V) |
| ピン 61 | I/O — User I/O (Bank 3) |
| ピン 62 | I/O — User I/O (Bank 3) |
| ピン 63 | I/O — User I/O (Bank 3) |
| ピン 64 | I/O — User I/O (Bank 4) |
| ピン 65 | I/O — User I/O (Bank 4) |
| ピン 66 | GND — Ground |
| ピン 67 | I/O — User I/O (Bank 4) |
| ピン 68 | VCCIO4 — Bank 4 I/O supply voltage |
| ピン 69 | I/O — User I/O (Bank 4) |
| ピン 70 | I/O — User I/O (Bank 4) |
| ピン 71 | I/O — User I/O (Bank 4) |
| ピン 72 | I/O — User I/O (Bank 4) |
| ピン 73 | I/O — User I/O (Bank 4) |
| ピン 74 | I/O — User I/O (Bank 4) |
| ピン 75 | GND — Ground |
| ピン 76 | I/O — User I/O (Bank 4) |
| ピン 77 | I/O — User I/O (Bank 4) |
| ピン 78 | I/O — User I/O (Bank 4) |
| ピン 79 | I/O — User I/O (Bank 4) |
| ピン 80 | I/O — User I/O (Bank 4) |
| ピン 81 | I/O — User I/O (Bank 4) |
| ピン 82 | VCCINT — Core supply voltage (1.8 V) |
| ピン 83 | TDI — JTAG Test Data In (Bank 1) |
| ピン 84 | TMS — JTAG Test Mode Select (Bank 1) |
| ピン 85 | TCK — JTAG Test Clock (Bank 1) |
| ピン 86 | VCCIO1 — Bank 1 I/O supply voltage |
| ピン 87 | I/O — User I/O (Bank 1) |
| ピン 88 | I/O — User I/O (Bank 1) |
| ピン 89 | I/O — User I/O (Bank 1) |
| ピン 90 | I/O — User I/O (Bank 1) |
| ピン 91 | GND — Ground |
| ピン 92 | I/O — User I/O (Bank 1) |
| ピン 93 | I/O — User I/O (Bank 1) |
| ピン 94 | I/O — User I/O (Bank 1) |
| ピン 95 | I/O — User I/O (Bank 1) |
| ピン 96 | I/O — User I/O (Bank 1) |
| ピン 97 | I/O — User I/O (Bank 1) |
| ピン 98 | I/O — User I/O (Bank 1) |
| ピン 99 | I/O — User I/O (Bank 1) |
| ピン 100 | TDO — JTAG Test Data Out (Bank 1) |
主な用途
5M160ZT100I5N の用途: 6 件s: Industrial I/O Expansion and Glue Logic, FPGA / ASIC Companion Configuration and Boot Sequencer, Bus Interface Bridges (I²C, SPI, UART, Parallel), LED Display Drivers and Signage Controllers, Power Sequencing and Hot-Swap Controllers, Automotive Infotainment and Body Electronics.
Industrial I/O Expansion and Glue Logic
The 5M160ZT100I5N is well suited to industrial I/O expansion as a glue-logic bridge between microcontrollers, sensors, and actuators. With 79 user I/Os and multi-voltage support from 1.2 V to 3.3 V, it can translate between legacy 3.3 V microcontroller buses and modern 1.8 V peripherals without external level shifters. The 7.5 ns tPD enables deterministic decoding of address and chip-select lines in real-time PLC backplanes, while the industrial -40 °C to +100 °C range covers factory-floor and outdoor cabinet environments. Its non-volatile instant-on configuration eliminates boot PROM complexity in safety-critical industrial controllers.
おすすめ
FPGA / ASIC Companion Configuration and Boot Sequencer
As a companion to FPGAs such as Cyclone V or Cyclone 10 LP, the 5M160ZT100I5N serves as a deterministic boot sequencer that holds FPGAs in reset, sequences power rails, and releases configuration pins in the correct order. Its non-volatile flash-backed configuration powers up in microseconds without external boot memory, making it ideal when FPGA configuration time is critical. The 1.8 V VCCINT matches the FPGAs in the Cyclone V family, while multi-voltage I/O banks allow direct connection to 2.5 V or 3.3 V support circuitry without external level shifting.
おすすめ
Bus Interface Bridges (I²C, SPI, UART, Parallel)
The 5M160ZT100I5N excels as a protocol-bridging device when a system needs to connect an I²C master to an SPI slave, or convert a parallel 8-bit bus to a serial UART. Its 128 macro cells comfortably fit state-machine implementations of common protocols, while the 7.5 ns tPD meets the setup-and-hold requirements of 400 kHz Fast-Mode I²C and 10 MHz SPI. Multi-voltage I/O (1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V) lets the CPLD sit between two devices of incompatible logic levels without a discrete translator, saving board area and BOM cost.
おすすめ
LED Display Drivers and Signage Controllers
LED matrix displays and signage controllers use the 5M160ZT100I5N for row/column scanning, PWM dimming, and timing generation. Its 79 user I/Os can drive multiple 8-bit shift-register chains in parallel, refreshing 64×32 RGB LED panels at typical 1:16 scan rates without external logic. The 1.8 V core keeps power consumption low in always-on digital-signage applications, while the multi-voltage I/O directly interfaces to 3.3 V or 5 V LED-driver ICs. Industrial temperature rating supports outdoor and semi-outdoor installations such as transit-information displays and retail signage.
おすすめ
Power Sequencing and Hot-Swap Controllers
The 5M160ZT100I5N provides deterministic multi-rail power-up and power-down sequencing in ATCA, MicroTCA, and ATX systems where the order of rail rise/fall times is critical to ASIC and FPGA reliability. With 128 macro cells and 79 user I/Os, the CPLD can sequence 6-8 independent rails with programmable delays, monitor power-good signals, and assert/clear reset lines. The non-volatile instant-on behavior means the sequencing logic is active as soon as the 1.8 V rail comes up, without waiting for an FPGA to be configured. JTAG access enables in-system reprogramming of sequencing parameters during board bring-up.
おすすめ
Automotive Infotainment and Body Electronics
The 5M160ZT100I5N is used in automotive infotainment head units, instrument clusters, and body-electronics modules as glue logic, CAN/LIN gateway controllers, and backlight drivers. The industrial -40 °C to +100 °C temperature range covers cabin environments, and the AEC-Q100-grade sibling 5M160ZT100A5N extends coverage to under-hood applications. With multi-voltage I/O support, the CPLD bridges 3.3 V microcontrollers to 5 V body-control bus peripherals, while the JTAG interface enables end-of-line boundary-scan testing for automotive quality assurance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5M160ZT100I5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5M160ZT100C5N | 5M160ZT100A5N | 5M160ZT100I5 | 5M160ZT100C4N |
|---|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Macro Cells | 128 | 128 | 128 | 128 | 128 |
| Logic Elements | 160 | 160 | 160 | 160 | 160 |
| Maximum User I/Os | 79 | 79 | 79 | 79 | 79 |
| Pin-to-Pin Delay (tPD) | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 10 ns (slower -8 speed grade) |
| Operating Temperature | -40 °C to +100 °C (industrial) | 0 °C to +85 °C (commercial) | -40 °C to +125 °C (automotive AEC-Q100) | -40 °C to +100 °C (industrial) | 0 °C to +85 °C (commercial) |
| Core Voltage (VCCINT) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Speed Grade | -5 | -5 | -5 | -5 | -4 (slower) |
主な差別化要因
- Highest I/O count in the 5M160Z family （vs 5M160ZM100I5N)
- Industrial -40 °C to +100 °C operating range （vs 5M160ZT100C5N)
- Non-volatile instant-on configuration （vs Xilinx XC2C128-7VQG100C)
設計ノート
The 5M160ZT100I5N operates from a 1.8 V VCCINT core supply with four independent VCCIO banks (VCCIO1-VCCIO4) supporting 1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V LVCMOS and LVTTL. Place one 0.1 µF decoupling capacitor within 5 mm of every VCCINT pin and one 0.1 µF + 10 µF bulk capacitor near each VCCIO bank pin. JTAG pins (TMS, TDI, TDO, TCK) reside in Bank 1, so VCCIO1 must be present for boundary-scan to function even when Bank 1 is unused for application I/O.
Route JTAG signals (TMS, TDI, TDO, TCK) as a daisy-chain across all JTAG-compliant devices on the board, with 10 kΩ pull-ups on TMS, TDI, and TCK to their respective VCCIO bank supply. Keep TCK rise/fall times under 10 ns; if driving multiple devices, buffer TCK locally at each TAP. For multi-voltage systems, ensure that each VCCIO bank is driven by its own regulator so that the CPLD can be partially powered-down without back-powering unused I/O pins.
Do not apply signal voltage to any I/O pin before its corresponding VCCIO bank is powered - the absolute-maximum rating is VCCIO + 0.3 V with diode-clamping. Do not use 5 V inputs even on 3.3 V-tolerant banks; MAX V banks are NOT 5 V-tolerant. When migrating from the 5M160Z A-speed grade (-A5N) to the C or I grade, the JTAG IDCODE is identical but DC and AC specifications differ - re-validate timing closure in Quartus Prime.
Estimated: At maximum toggle activity across all 79 I/Os at 100 MHz with 3.3 V VCCIO, the 5M160ZT100I5N can dissipate up to approximately 200 mW, raising the junction temperature roughly 13 °C above ambient on a standard 4-layer JEDEC EIA/JESD51 test board (θJA ≈ 65 °C/W for TQFP-100). For sustained high-toggle industrial environments, route copper pours on the top and inner layers under the exposed thermal slug area to keep Tj below 100 °C.
コンプライアンス情報
RoHS and REACH compliant per Intel product page. Standard 5M160ZT100I5N is NOT AEC-Q100 qualified; choose the 5M160ZT100A5N variant for automotive AEC-Q100 applications.