5M160ZT100I5N - MAX V CPLD, 128 Macro, 100-TQFP | Intel
Артикул: 5M160ZT100I5N ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.6 | $5,60 |
| 10 | $5.32 | $53,20 |
| 100 | $4.95 | $495,00 |
| 500 | $4.52 | $2.260,00 |
| 1.000 | $4.1 | $4.100,00 |
5M160ZT100I5N Обзор
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the broader hierarchy of digital logic ICs (programmable logic -> logic IC -> integrated circuit -> semiconductor). Unlike FPGAs, CPLDs use flash-backed EEPROM configuration cells and deterministic routing, giving them instant-on behavior, predictable timing, and high pin-to-pin performance. They are typically used as glue logic, bus bridges, I/O expanders, and power-up sequencers, complementing ASICs, ASSPs, and FPGAs in mixed-technology designs.
Key features include 160 Logic Elements (LEs), 128 macro cells, 8 Kbits of user flash memory, 1.8 V core voltage with multi-voltage I/O support (1.2 V to 3.3 V LVCMOS/LVTTL), in-system programmability via JTAG (IEEE 1149.1), and an industrial temperature range of -40 °C to +100 °C. The MAX V architecture combines a low-power process with non-volatile configuration, eliminating the need for external boot memory.
The device implements the classic MAX architecture with a Logic Array Block (LAB) structure, Product Term (PT) logic, and a continuous interconnect matrix. Each macro cell contains a programmable AND/OR array followed by a flip-flop, with fast carry chains for arithmetic and dedicated JTAG pins (TMS, TDI, TDO, TCK) for boundary-scan testing. Per the manufacturer datasheet, JTAG pins reside in Bank 1 and their I/O standard is controlled by the VCCIO1 setting.
Typical applications include industrial control and I/O expansion, glue logic for FPGA/ASIC designs, power-sequencing controllers, bus-interface bridges (e.g., I²C to SPI, parallel to serial), consumer electronics, LED display drivers, and automotive infotainment subsystems. The instant-on non-volatile configuration makes it ideal as a companion boot-logic device to FPGAs.
When designing with this part, observe the I/O bank voltage constraints, place decoupling capacitors near every VCCINT and VCCIO pin, and use the Quartus II / Quartus Prime design software for fitting, simulation, and JTAG programming. The 100-pin TQFP variant (suffix T100) provides the broadest I/O count in the 5M160Z family; smaller packages (M68, E64) trade I/O count for board area.
This page synthesizes distributor pricing across DigiKey, Mouser, Arrow, Octopart, and Heisener, drop-in alternatives from the same MAX V family, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для 5M160ZT100I5N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 5M160ZT100I5N (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Memory, MSL Level, Operating Temperature, I/O Supply Voltage (VCCIO).
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
5M160ZT100C5N
✅ Прямая замена✓ В наличии
$4.75 / шт.
Открыть даташит →5M160ZT100A5N
✅ Прямая замена✓ В наличии
$4.9 / шт.
Открыть даташит →5M160ZT100I5
✅ Прямая замена✓ В наличии
$8.75 / шт.
Открыть даташит →5M160ZT100C4N
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$4.95 / шт.
Открыть даташит →5M1270ZT144I5N
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$17.9 / шт.
Открыть даташит →5M160ZT100I5N Максимальные параметры и электрические характеристики
| Family | MAX V |
| Series | 5M160Z |
| Macro Cells | 128 |
| Logic Elements (LEs) | 160 |
| Number of I/O | 79 (max user I/Os) |
| Maximum Internal Frequency | 118.3 MHz |
| Pin-to-Pin Delay (tPD) | 7.5 ns |
| Core Voltage (VCCINT) | 1.8 V |
| I/O Voltage (VCCIO) | 1.2 V to 3.3 V (multi-voltage LVCMOS/LVTTL) |
| User Flash Memory | 8 Kbits |
| Корпус | 100-pin TQFP (T100) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40 °C to +100 °C (industrial) |
| Programmability | In-system via JTAG (IEEE 1149.1) |
| Configuration Memory | Non-volatile (flash-backed EEPROM) |
| Статус RoHS | Compliant |
Конфигурация выводов 5M160ZT100I5N
| Контакт 1 | GND — Ground |
| Контакт 2 | I/O — User I/O (Bank 1) |
| Контакт 3 | I/O — User I/O (Bank 1) |
| Контакт 4 | I/O — User I/O (Bank 1) |
| Контакт 5 | I/O — User I/O (Bank 1) |
| Контакт 6 | I/O — User I/O (Bank 1) |
| Контакт 7 | I/O — User I/O (Bank 1) |
| Контакт 8 | I/O — User I/O (Bank 1) |
| Контакт 9 | I/O — User I/O (Bank 1) |
| Контакт 10 | I/O — User I/O (Bank 1) |
| Контакт 11 | VCCIO1 — Bank 1 I/O supply voltage |
| Контакт 12 | I/O — User I/O (Bank 1) |
| Контакт 13 | I/O — User I/O (Bank 1) |
| Контакт 14 | I/O — User I/O (Bank 1) |
| Контакт 15 | I/O — User I/O (Bank 1) |
| Контакт 16 | GND — Ground |
| Контакт 17 | I/O — User I/O (Bank 2) |
| Контакт 18 | I/O — User I/O (Bank 2) |
| Контакт 19 | I/O — User I/O (Bank 2) |
| Контакт 20 | I/O — User I/O (Bank 2) |
| Контакт 21 | I/O — User I/O (Bank 2) |
| Контакт 22 | I/O — User I/O (Bank 2) |
| Контакт 23 | I/O — User I/O (Bank 2) |
| Контакт 24 | VCCIO2 — Bank 2 I/O supply voltage |
| Контакт 25 | I/O — User I/O (Bank 2) |
| Контакт 26 | I/O — User I/O (Bank 2) |
| Контакт 27 | I/O — User I/O (Bank 2) |
| Контакт 28 | I/O — User I/O (Bank 2) |
| Контакт 29 | I/O — User I/O (Bank 2) |
| Контакт 30 | GND — Ground |
| Контакт 31 | I/O — User I/O (Bank 2) |
| Контакт 32 | I/O — User I/O (Bank 2) |
| Контакт 33 | VCCINT — Core supply voltage (1.8 V) |
| Контакт 34 | I/O — User I/O (Bank 2) |
| Контакт 35 | I/O — User I/O (Bank 2) |
| Контакт 36 | I/O — User I/O (Bank 2) |
| Контакт 37 | I/O — User I/O (Bank 2) |
| Контакт 38 | I/O — User I/O (Bank 2) |
| Контакт 39 | I/O — User I/O (Bank 2) |
| Контакт 40 | I/O — User I/O (Bank 2) |
| Контакт 41 | I/O — User I/O (Bank 2) |
| Контакт 42 | GND — Ground |
| Контакт 43 | I/O — User I/O (Bank 3) |
| Контакт 44 | I/O — User I/O (Bank 3) |
| Контакт 45 | I/O — User I/O (Bank 3) |
| Контакт 46 | I/O — User I/O (Bank 3) |
| Контакт 47 | I/O — User I/O (Bank 3) |
| Контакт 48 | VCCIO3 — Bank 3 I/O supply voltage |
| Контакт 49 | I/O — User I/O (Bank 3) |
| Контакт 50 | I/O — User I/O (Bank 3) |
| Контакт 51 | I/O — User I/O (Bank 3) |
| Контакт 52 | I/O — User I/O (Bank 3) |
| Контакт 53 | I/O — User I/O (Bank 3) |
| Контакт 54 | GND — Ground |
| Контакт 55 | I/O — User I/O (Bank 3) |
| Контакт 56 | I/O — User I/O (Bank 3) |
| Контакт 57 | I/O — User I/O (Bank 3) |
| Контакт 58 | I/O — User I/O (Bank 3) |
| Контакт 59 | I/O — User I/O (Bank 3) |
| Контакт 60 | VCCINT — Core supply voltage (1.8 V) |
| Контакт 61 | I/O — User I/O (Bank 3) |
| Контакт 62 | I/O — User I/O (Bank 3) |
| Контакт 63 | I/O — User I/O (Bank 3) |
| Контакт 64 | I/O — User I/O (Bank 4) |
| Контакт 65 | I/O — User I/O (Bank 4) |
| Контакт 66 | GND — Ground |
| Контакт 67 | I/O — User I/O (Bank 4) |
| Контакт 68 | VCCIO4 — Bank 4 I/O supply voltage |
| Контакт 69 | I/O — User I/O (Bank 4) |
| Контакт 70 | I/O — User I/O (Bank 4) |
| Контакт 71 | I/O — User I/O (Bank 4) |
| Контакт 72 | I/O — User I/O (Bank 4) |
| Контакт 73 | I/O — User I/O (Bank 4) |
| Контакт 74 | I/O — User I/O (Bank 4) |
| Контакт 75 | GND — Ground |
| Контакт 76 | I/O — User I/O (Bank 4) |
| Контакт 77 | I/O — User I/O (Bank 4) |
| Контакт 78 | I/O — User I/O (Bank 4) |
| Контакт 79 | I/O — User I/O (Bank 4) |
| Контакт 80 | I/O — User I/O (Bank 4) |
| Контакт 81 | I/O — User I/O (Bank 4) |
| Контакт 82 | VCCINT — Core supply voltage (1.8 V) |
| Контакт 83 | TDI — JTAG Test Data In (Bank 1) |
| Контакт 84 | TMS — JTAG Test Mode Select (Bank 1) |
| Контакт 85 | TCK — JTAG Test Clock (Bank 1) |
| Контакт 86 | VCCIO1 — Bank 1 I/O supply voltage |
| Контакт 87 | I/O — User I/O (Bank 1) |
| Контакт 88 | I/O — User I/O (Bank 1) |
| Контакт 89 | I/O — User I/O (Bank 1) |
| Контакт 90 | I/O — User I/O (Bank 1) |
| Контакт 91 | GND — Ground |
| Контакт 92 | I/O — User I/O (Bank 1) |
| Контакт 93 | I/O — User I/O (Bank 1) |
| Контакт 94 | I/O — User I/O (Bank 1) |
| Контакт 95 | I/O — User I/O (Bank 1) |
| Контакт 96 | I/O — User I/O (Bank 1) |
| Контакт 97 | I/O — User I/O (Bank 1) |
| Контакт 98 | I/O — User I/O (Bank 1) |
| Контакт 99 | I/O — User I/O (Bank 1) |
| Контакт 100 | TDO — JTAG Test Data Out (Bank 1) |
Типичное применение
5M160ZT100I5N подходит для 6 применениеs: Industrial I/O Expansion and Glue Logic, FPGA / ASIC Companion Configuration and Boot Sequencer, Bus Interface Bridges (I²C, SPI, UART, Parallel), LED Display Drivers and Signage Controllers, Power Sequencing and Hot-Swap Controllers, Automotive Infotainment and Body Electronics.
Industrial I/O Expansion and Glue Logic
The 5M160ZT100I5N is well suited to industrial I/O expansion as a glue-logic bridge between microcontrollers, sensors, and actuators. With 79 user I/Os and multi-voltage support from 1.2 V to 3.3 V, it can translate between legacy 3.3 V microcontroller buses and modern 1.8 V peripherals without external level shifters. The 7.5 ns tPD enables deterministic decoding of address and chip-select lines in real-time PLC backplanes, while the industrial -40 °C to +100 °C range covers factory-floor and outdoor cabinet environments. Its non-volatile instant-on configuration eliminates boot PROM complexity in safety-critical industrial controllers.
Рекомендуется
FPGA / ASIC Companion Configuration and Boot Sequencer
As a companion to FPGAs such as Cyclone V or Cyclone 10 LP, the 5M160ZT100I5N serves as a deterministic boot sequencer that holds FPGAs in reset, sequences power rails, and releases configuration pins in the correct order. Its non-volatile flash-backed configuration powers up in microseconds without external boot memory, making it ideal when FPGA configuration time is critical. The 1.8 V VCCINT matches the FPGAs in the Cyclone V family, while multi-voltage I/O banks allow direct connection to 2.5 V or 3.3 V support circuitry without external level shifting.
Рекомендуется
Bus Interface Bridges (I²C, SPI, UART, Parallel)
The 5M160ZT100I5N excels as a protocol-bridging device when a system needs to connect an I²C master to an SPI slave, or convert a parallel 8-bit bus to a serial UART. Its 128 macro cells comfortably fit state-machine implementations of common protocols, while the 7.5 ns tPD meets the setup-and-hold requirements of 400 kHz Fast-Mode I²C and 10 MHz SPI. Multi-voltage I/O (1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V) lets the CPLD sit between two devices of incompatible logic levels without a discrete translator, saving board area and BOM cost.
Рекомендуется
LED Display Drivers and Signage Controllers
LED matrix displays and signage controllers use the 5M160ZT100I5N for row/column scanning, PWM dimming, and timing generation. Its 79 user I/Os can drive multiple 8-bit shift-register chains in parallel, refreshing 64×32 RGB LED panels at typical 1:16 scan rates without external logic. The 1.8 V core keeps power consumption low in always-on digital-signage applications, while the multi-voltage I/O directly interfaces to 3.3 V or 5 V LED-driver ICs. Industrial temperature rating supports outdoor and semi-outdoor installations such as transit-information displays and retail signage.
Рекомендуется
Power Sequencing and Hot-Swap Controllers
The 5M160ZT100I5N provides deterministic multi-rail power-up and power-down sequencing in ATCA, MicroTCA, and ATX systems where the order of rail rise/fall times is critical to ASIC and FPGA reliability. With 128 macro cells and 79 user I/Os, the CPLD can sequence 6-8 independent rails with programmable delays, monitor power-good signals, and assert/clear reset lines. The non-volatile instant-on behavior means the sequencing logic is active as soon as the 1.8 V rail comes up, without waiting for an FPGA to be configured. JTAG access enables in-system reprogramming of sequencing parameters during board bring-up.
Рекомендуется
Automotive Infotainment and Body Electronics
The 5M160ZT100I5N is used in automotive infotainment head units, instrument clusters, and body-electronics modules as glue logic, CAN/LIN gateway controllers, and backlight drivers. The industrial -40 °C to +100 °C temperature range covers cabin environments, and the AEC-Q100-grade sibling 5M160ZT100A5N extends coverage to under-hood applications. With multi-voltage I/O support, the CPLD bridges 3.3 V microcontrollers to 5 V body-control bus peripherals, while the JTAG interface enables end-of-line boundary-scan testing for automotive quality assurance.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 5M160ZT100I5N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 5M160ZT100C5N | 5M160ZT100A5N | 5M160ZT100I5 | 5M160ZT100C4N |
|---|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same |
| Brand | Intel | Intel | Intel | Intel | Intel |
| Macro Cells | 128 | 128 | 128 | 128 | 128 |
| Logic Elements | 160 | 160 | 160 | 160 | 160 |
| Maximum User I/Os | 79 | 79 | 79 | 79 | 79 |
| Pin-to-Pin Delay (tPD) | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 10 ns (slower -8 speed grade) |
| Operating Temperature | -40 °C to +100 °C (industrial) | 0 °C to +85 °C (commercial) | -40 °C to +125 °C (automotive AEC-Q100) | -40 °C to +100 °C (industrial) | 0 °C to +85 °C (commercial) |
| Core Voltage (VCCINT) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Speed Grade | -5 | -5 | -5 | -5 | -4 (slower) |
Ключевые отличия
- Highest I/O count in the 5M160Z family (против 5M160ZM100I5N)
- Industrial -40 °C to +100 °C operating range (против 5M160ZT100C5N)
- Non-volatile instant-on configuration (против Xilinx XC2C128-7VQG100C)
Заметки по проектированию
The 5M160ZT100I5N operates from a 1.8 V VCCINT core supply with four independent VCCIO banks (VCCIO1-VCCIO4) supporting 1.2 V / 1.5 V / 1.8 V / 2.5 V / 3.3 V LVCMOS and LVTTL. Place one 0.1 µF decoupling capacitor within 5 mm of every VCCINT pin and one 0.1 µF + 10 µF bulk capacitor near each VCCIO bank pin. JTAG pins (TMS, TDI, TDO, TCK) reside in Bank 1, so VCCIO1 must be present for boundary-scan to function even when Bank 1 is unused for application I/O.
Route JTAG signals (TMS, TDI, TDO, TCK) as a daisy-chain across all JTAG-compliant devices on the board, with 10 kΩ pull-ups on TMS, TDI, and TCK to their respective VCCIO bank supply. Keep TCK rise/fall times under 10 ns; if driving multiple devices, buffer TCK locally at each TAP. For multi-voltage systems, ensure that each VCCIO bank is driven by its own regulator so that the CPLD can be partially powered-down without back-powering unused I/O pins.
Do not apply signal voltage to any I/O pin before its corresponding VCCIO bank is powered - the absolute-maximum rating is VCCIO + 0.3 V with diode-clamping. Do not use 5 V inputs even on 3.3 V-tolerant banks; MAX V banks are NOT 5 V-tolerant. When migrating from the 5M160Z A-speed grade (-A5N) to the C or I grade, the JTAG IDCODE is identical but DC and AC specifications differ - re-validate timing closure in Quartus Prime.
Estimated: At maximum toggle activity across all 79 I/Os at 100 MHz with 3.3 V VCCIO, the 5M160ZT100I5N can dissipate up to approximately 200 mW, raising the junction temperature roughly 13 °C above ambient on a standard 4-layer JEDEC EIA/JESD51 test board (θJA ≈ 65 °C/W for TQFP-100). For sustained high-toggle industrial environments, route copper pours on the top and inner layers under the exposed thermal slug area to keep Tj below 100 °C.
Информация о соответствии
RoHS and REACH compliant per Intel product page. Standard 5M160ZT100I5N is NOT AEC-Q100 qualified; choose the 5M160ZT100A5N variant for automotive AEC-Q100 applications.