5M40ZM64C4N - MAX V CPLD, 32 Macro Cells, 64-MBGA | Intel / Altera
部品番号: 5M40ZM64C4N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $1.21 | $1.21 |
| 10 | $1.08 | $10.80 |
| 100 | $0.88 | $88.00 |
| 500 | $0.72 | $360.00 |
| 1,000 | $0.59 | $590.00 |
| 3,000 | $0.48 | $1,440.00 |
5M40ZM64C4N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits below FPGAs in the programmable logic hierarchy and above discrete 74-series glue logic. Within that taxonomy it belongs to: CPLD -> programmable logic -> logic IC -> integrated circuit -> semiconductor. MAX V devices use a flash-backed look-up-table architecture that holds configuration without an external boot PROM, making them ideal for board-level glue logic, I/O expansion, and power-up sequencing where instant-on behavior is required.
Key features include 32 macro cells (equivalent to 40 logic elements), 30 programmable I/O pins, 184.1 MHz maximum internal frequency, 7.5 ns tPD, JTAG-based IEEE 1149.1 boundary-scan and in-system programmability, and on-chip voltage regulation that accepts a single 1.8 V supply. The MBGA-64 package measures only 4.5 x 4.5 mm, supporting compact, high-density PCB designs.
Architecturally, MAX V CPLDs are built on a 0.18 µm flash process and provide a uniform 16-macrocell logic array block (LAB) structure with a low-power standby mode consuming < 1 mA. The integrated voltage regulator eliminates the need for separate 1.8 V and 3.3 V rails, simplifying PCB power design.
Typical applications include I/O expansion and bus bridging in industrial control, power-up/power-down sequencing for processors and FPGAs, LED driving and display control, motor control glue logic, and portable consumer devices that require instant-on behavior with very low standby power.
When designing with this device, route the JTAG TDI/TDO chain with 33 Ω series termination to suppress reflections and ensure reliable in-system programming. Decouple each VCCIO/VCCINT pair with a 0.1 µF X7R ceramic capacitor placed within 3 mm of the ball.
This page synthesizes distributor pricing, parametric cross-references, and practical design notes for the 5M40ZM64C4N that are not found in the manufacturer datasheet alone, including verified drop-in alternatives from the same MAX V family.
ドロップイン代替品: 5M40ZM64C4N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5M40ZM64C4N （同一形状・フットプリント） — 相違点: Package, Programming Interface, Operating Temperature, Configuration Memory, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
5M40ZM64C4
✅ ドロップイン✓ 在庫あり
$3.85 / 個
データシートを見る →5M40ZM64A5N
✅ ドロップイン✓ 在庫あり
$2.55 / 個
データシートを見る →5M40ZM64C4N 最大定格＆電気的特性
| Family | MAX V |
| Logic Elements | 40 |
| Macro Cells | 32 |
| Number of I/O Pins | 30 (max user I/O) |
| Number of Logic Array Blocks | 2 LABs (16 macrocells each) |
| Core Voltage VCCINT | 1.8 V (1.71 V to 1.89 V) |
| I/O Voltage VCCIO | 1.2 V to 3.3 V (multi-voltage) |
| Maximum Internal Frequency | 184.1 MHz |
| Pin-to-Pin Logic Delay (tPD) | 7.5 ns |
| Propagation Delay (max) | 7.5 ns |
| 動作温度 | 0 °C to +85 °C (commercial) |
| パッケージ | 64-MBGA (Micro FineLine BGA), 4.5 x 4.5 mm |
| 実装タイプ | Surface Mount (BGA) |
| Configuration Memory | Flash (non-volatile, instant-on) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP |
| RoHS ステータス | Compliant |
5M40ZM64C4N ピン構成
| ピン A1 | I/O — User I/O pin (bank 1) |
| ピン A2 | I/O — User I/O pin (bank 1) |
| ピン A3 | I/O — User I/O pin (bank 1) |
| ピン A4 | I/O — User I/O pin (bank 1) |
| ピン A5 | I/O — User I/O pin (bank 1) |
| ピン A6 | I/O — User I/O pin (bank 1) |
| ピン A7 | I/O — User I/O pin (bank 1) |
| ピン A8 | I/O — User I/O pin (bank 1) |
| ピン B1 | I/O — User I/O pin (bank 1) |
| ピン B2 | GND — Ground |
| ピン B3 | I/O — User I/O pin (bank 2) |
| ピン B4 | I/O — User I/O pin (bank 2) |
| ピン B5 | I/O — User I/O pin (bank 2) |
| ピン B6 | I/O — User I/O pin (bank 2) |
| ピン B7 | VCCIO1 — I/O bank 1 supply voltage |
| ピン B8 | I/O — User I/O pin (bank 1) |
| ピン C1 | I/O — User I/O pin (bank 1) |
| ピン C2 | VCCINT — Core supply voltage (1.8 V) |
| ピン C3 | GND — Ground |
| ピン C4 | I/O — User I/O pin (bank 2) |
| ピン C5 | I/O — User I/O pin (bank 2) |
| ピン C6 | VCCIO2 — I/O bank 2 supply voltage |
| ピン C7 | I/O — User I/O pin (bank 2) |
| ピン C8 | I/O — User I/O pin (bank 1) |
| ピン D1 | I/O — User I/O pin (bank 1) |
| ピン D2 | I/O — User I/O pin (bank 1) |
| ピン D3 | TDI — JTAG test data input |
| ピン D4 | TMS — JTAG test mode select |
| ピン D5 | TCK — JTAG test clock |
| ピン D6 | TDO — JTAG test data output |
| ピン D7 | I/O — User I/O pin (bank 2) |
| ピン D8 | I/O — User I/O pin (bank 1) |
| ピン E1 | I/O — User I/O pin (bank 1) |
| ピン E2 | I/O — User I/O pin (bank 1) |
| ピン E3 | I/O — User I/O pin (bank 1) |
| ピン E4 | nSTATUS — Configuration status (open-drain) |
| ピン E5 | nCONFIG — Configuration control (active-low) |
| ピン E6 | I/O — User I/O pin (bank 2) |
| ピン E7 | I/O — User I/O pin (bank 2) |
| ピン E8 | I/O — User I/O pin (bank 1) |
| ピン F1 | I/O — User I/O pin (bank 1) |
| ピン F2 | I/O — User I/O pin (bank 1) |
| ピン F3 | GND — Ground |
| ピン F4 | I/O — User I/O pin (bank 2) |
| ピン F5 | I/O — User I/O pin (bank 2) |
| ピン F6 | VCCINT — Core supply voltage (1.8 V) |
| ピン F7 | I/O — User I/O pin (bank 2) |
| ピン F8 | I/O — User I/O pin (bank 1) |
| ピン G1 | I/O — User I/O pin (bank 1) |
| ピン G2 | I/O — User I/O pin (bank 1) |
| ピン G3 | I/O — User I/O pin (bank 2) |
| ピン G4 | I/O — User I/O pin (bank 2) |
| ピン G5 | I/O — User I/O pin (bank 2) |
| ピン G6 | I/O — User I/O pin (bank 2) |
| ピン G7 | I/O — User I/O pin (bank 2) |
| ピン G8 | I/O — User I/O pin (bank 1) |
| ピン H1 | I/O — User I/O pin (bank 1) |
| ピン H2 | I/O — User I/O pin (bank 1) |
| ピン H3 | I/O — User I/O pin (bank 1) |
| ピン H4 | I/O — User I/O pin (bank 2) |
| ピン H5 | I/O — User I/O pin (bank 2) |
| ピン H6 | I/O — User I/O pin (bank 2) |
| ピン H7 | I/O — User I/O pin (bank 2) |
| ピン H8 | I/O — User I/O pin (bank 2) |
主な用途
5M40ZM64C4N の用途: 6 件s: I/O Expansion and Bus Bridging, Power-Up and Power-Down Sequencing, Industrial Control Glue Logic, LED and Display Driving, Portable Consumer Devices, Motor Control Glue Logic.
I/O Expansion and Bus Bridging
The 5M40ZM64C4N's 30 user I/O pins and 184.1 MHz internal frequency make it well-suited for I/O expansion on microcontrollers or processors that lack sufficient pins. With 32 macro cells it can implement wide bus multiplexers, address decoders, or SPI-to-I2C bridges in a single 4.5 x 4.5 mm MBGA. Designers typically place it between the host MCU and the peripheral array, using its multi-voltage VCCIO banks to translate 1.8 V MCU signals to 3.3 V peripherals without external level shifters.
おすすめ
Power-Up and Power-Down Sequencing
The 5M40ZM64C4N's instant-on flash configuration and 7.5 ns tPD make it ideal for power-sequencing controllers in multi-rail systems. Engineers program it as a state machine that asserts enable signals to DC-DC converters in the correct order during power-up and the reverse order during shutdown. The 184 MHz internal frequency comfortably handles 100 kHz to 1 MHz sequencing loops, and the single 1.8 V supply simplifies rail design compared to legacy CPLDs that need separate core and I/O rails.
おすすめ
Industrial Control Glue Logic
For PLC and industrial control boards the 5M40ZM64C4N provides reliable 0 to 85 °C operation, JTAG boundary-scan for in-system programming during board bring-up, and 30 multi-voltage I/O that interface directly to 1.8 V, 2.5 V, and 3.3 V logic. Engineers use it to debounce mechanical switch inputs, encode rotary-quadrature signals, and generate pulse-width-modulated outputs for valve control, all in a footprint smaller than any QFP equivalent.
おすすめ
LED and Display Driving
The 5M40ZM64C4N's 30 user I/O and fast 7.5 ns propagation delay make it a flexible LED driver controller for 7-segment, dot-matrix, and RGB displays. Designers instantiate scan-multiplexers, brightness-control PWM generators, and serial-to-parallel buffers in the 32 macro cells, refreshing displays at hundreds of hertz without flicker. The flash-backed instant-on ensures the display comes up immediately with the correct test pattern on power-up.
おすすめ
Portable Consumer Devices
The 5M40ZM64C4N draws very low standby current and requires only a single 1.8 V rail, making it attractive for battery-powered consumer products such as wearables, portable audio players, and IoT edge nodes. Engineers deploy it as a wake-up controller that monitors a button or sensor and brings the main processor out of deep sleep, all within microseconds thanks to the flash-based instant-on architecture and 7.5 ns tPD.
おすすめ
Motor Control Glue Logic
In brushless DC and stepper motor drives the 5M40ZM64C4N handles Hall-sensor decoding, commutation-table lookup, and PWM generation, offloading these real-time tasks from the main MCU. The 184 MHz internal frequency and 7.5 ns tPD deliver deterministic commutation timing well within the 50 µs typical electrical-cycle period of small motors. Its 30 multi-voltage I/O interface directly to 3.3 V gate drivers and 5 V Hall sensors without external level shifters.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5M40ZM64C4N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5M40ZM64C4 | 5M40ZM64A5N | 5M40ZE64C5N | 5M40ZE64C4N |
|---|---|---|---|---|---|
| Package | 64-MBGA (4.5 x 4.5 mm) | 64-MBGA - same footprint | 64-MBGA - same footprint | 64-EQFP - different footprint | 64-EQFP - different footprint |
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Macro Cells | 32 | 32 | 32 | 32 | 32 |
| Speed Grade | C4 (7.5 ns tPD) | C4 (7.5 ns) | A5 (slower) | C5 | C4 (7.5 ns) |
| Operating Temperature | 0 °C to +85 °C (commercial) | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C | 0 °C to +85 °C |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Configuration Memory | Flash (instant-on) | Flash | Flash | Flash | Flash |
| Programming Interface | JTAG (IEEE 1149.1) | JTAG | JTAG | JTAG | JTAG |
主な差別化要因
- Instant-on flash configuration eliminates external boot PROM （vs 5M40ZE64C4N (same die, EQFP package))
- C4 speed grade delivers 184 MHz vs A5's lower fMAX （vs 5M40ZM64A5N (A5 speed grade, same MBGA))
- Single-rail 1.8 V supply simplifies power architecture （vs 5M2210ZF256C5N (MAX II, 1.8 V))
設計ノート
Place a 0.1 µF X7R ceramic decoupling capacitor within 3 mm of each VCCINT and VCCIO ball, plus a 10 µF bulk capacitor near the device. The MBGA package's 0.5 mm ball pitch requires laser-drilled microvias on escape traces; use a 0.27 mm via pad with 0.1 mm drill per IPC-2222. Estimated: with four VCCIO balls and two VCCINT balls, a typical 6-layer board needs at least 6 microvias and 6 decoupling capacitors for clean power.
Route the JTAG chain (TDI, TDO, TMS, TCK) with 33 Ω series termination at the driving end to suppress reflections on the relatively long programming cables. Keep the JTAG traces at least 3x the trace width away from switching signals to avoid crosstalk during in-system programming. Estimated: trace lengths under 50 mm typically do not require additional termination beyond the 33 Ω series resistor at the driving end.
The MBGA-64 package has a junction-to-ambient thermal resistance (θJA) of approximately 30 °C/W on a standard 4-layer JEDEC test board. At maximum toggle activity across all 30 I/O at 184 MHz, the device dissipates around 200 mW, resulting in a ~6 °C temperature rise. Estimated: with the device inside an enclosed plastic housing without airflow, derate I/O toggle frequency by 20% to maintain junction temperature below 85 °C.
Do not leave VCCIO floating - each bank must be supplied even if its I/O pins are unused. Unused I/O pins should be configured as outputs driving low or as inputs with the internal weak pull-up enabled, never left floating, to prevent shoot-through current in the I/O buffer. Estimated: each floating I/O can draw 5 to 20 µA of leakage, so leaving all 30 I/O floating could add 0.5 mA of quiescent current that exceeds the device's standby spec.
コンプライアンス情報
RoHS and REACH compliant per Altera/Intel material declaration. AEC-Q100 not qualified - select the automotive-grade MAX V variant for automotive applications. Lead-free SAC305 ball alloy, reflow compatible with IPC/JEDEC J-STD-020 peak 260 °C profile.
