5M80ZE64I5N - MAX V CPLD, 64 LE, EQFP-64 | Intel / Altera
部品番号: 5M80ZE64I5N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.45 | $6.45 |
| 10 | $5.81 | $58.10 |
| 100 | $5.2 | $520.00 |
| 500 | $4.65 | $2,325.00 |
| 1,000 | $4.1 | $4,100.00 |
5M80ZE64I5N 概要
What is a CPLD? A Complex Programmable Logic Device is a non-volatile, flash- or EEPROM-backed programmable logic IC that sits between simple PLDs (PAL/GAL) and FPGAs in the programmable logic hierarchy. CPLDs use a classic AND-OR PLA macrocell fabric with predictable, deterministic timing (no routing variability), making them ideal for glue logic, bus bridging, power-up control sequencing, and address decoding. They retain their configuration through power cycles without an external boot PROM, distinguishing them from SRAM-based FPGAs that require a configuration flash.
Key features include 64 macro cells, 30 user I/Os, an 118.3 MHz internal operating frequency, 1.8 V core voltage, in-system programmability via JTAG, and an exposed-pad EQFP-64 package for improved thermal dissipation. The MAX V architecture integrates a precision internal oscillator, user flash memory, and supports hot-socketing with 5 V tolerant I/O on most pins, enabling mixed-voltage interfacing to legacy 3.3 V and 5 V logic without external level shifters. The device is rated for the industrial temperature range (-40C to +100C for the I5N speed grade).
Typical applications include bus interface bridging, address decoding and glue logic, power-up/power-down sequencing, LED and LCD driving control, I/O expansion for microcontrollers, configuration loading for companion FPGAs, and legacy logic consolidation. Engineers use the 5M80ZE64I5N when deterministic timing, instant-on non-volatile configuration, and low unit cost matter more than the gate density of an FPGA.
When designing with this part, plan JTAG chain sharing with other Altera devices, observe the exposed-pad PCB layout for thermal relief, and verify signal-integrity margins against the 7.9 ns propagation delay budget. Quartus II Web Edition is the free toolchain that supports this part, with device support packages still downloadable from Intel's legacy MAX V support page.
This page synthesizes real-time distributor pricing, drop-in MAX V alternatives from Altera/Intel, and practical design notes that augment the manufacturer datasheet with information engineers need for sourcing decisions.
ドロップイン代替品: 5M80ZE64I5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: 5M80ZE64I5N （同一形状・フットプリント） — 相違点: Package, Configuration Memory, Operating Temperature, Propagation Delay (tPD), Programming Interface.
クイック比較ツール — 並列比較する代替部品を選択:
5M80ZE64C5N
✅ ドロップイン✓ 在庫あり
$4.38 / 個
データシートを見る →5M80ZE64A5N
✅ ドロップイン✓ 在庫あり
$3.05 / 個
データシートを見る →5M40ZE64I5N
✅ ドロップイン✓ 在庫あり
$2.74 / 個
データシートを見る →5M80ZE64C4N
✅ ドロップイン✓ 在庫あり
$2.1 / 個
データシートを見る →5M160ZE64I5N
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.13 / 個
データシートを見る →5M570ZE64I5N
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$7.2 / 個
データシートを見る →5M80ZE64I5N 最大定格＆電気的特性
| Family | MAX V |
| Device Type | CPLD - Complex Programmable Logic Device |
| Macro Cells (Logic Elements) | 64 |
| User I/Os | 30 |
| Internal Frequency (fMAX) | 118.3 MHz |
| Propagation Delay (tPD) | 7.9 ns |
| Core Supply Voltage (VCCINT) | 1.8 V |
| I/O Supply Voltage (VCCIO) | 1.2 V to 3.3 V |
| Logic Block Number | 4 |
| パッケージ | EQFP-64 (HTFQFP-64, 9x9 mm, 0.4 mm pitch) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +100C (Industrial) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP via Quartus II |
| Non-volatile Configuration | Yes (Flash-based) |
| RoHS ステータス | Compliant |
5M80ZE64I5N ピン構成
| ピン 1 | I/O — General purpose user I/O bank 1 |
| ピン 2 | I/O — General purpose user I/O bank 1 |
| ピン 3 | I/O — General purpose user I/O bank 1 |
| ピン 4 | I/O — General purpose user I/O bank 1 |
| ピン 5 | I/O — General purpose user I/O bank 1 |
| ピン 6 | I/O — General purpose user I/O bank 1 |
| ピン 7 | I/O — General purpose user I/O bank 1 |
| ピン 8 | I/O — General purpose user I/O bank 1 |
| ピン 9 | GND — Ground reference |
| ピン 10 | I/O — General purpose user I/O bank 2 |
| ピン 11 | I/O — General purpose user I/O bank 2 |
| ピン 12 | I/O — General purpose user I/O bank 2 |
| ピン 13 | I/O — General purpose user I/O bank 2 |
| ピン 14 | I/O — General purpose user I/O bank 2 |
| ピン 15 | I/O — General purpose user I/O bank 2 |
| ピン 16 | VCCIO1 — I/O bank 1 supply voltage (1.2 V to 3.3 V) |
| ピン 17 | I/O — General purpose user I/O bank 1 |
| ピン 18 | I/O — General purpose user I/O bank 1 |
| ピン 19 | I/O — General purpose user I/O bank 1 |
| ピン 20 | I/O — General purpose user I/O bank 1 |
| ピン 21 | I/O — General purpose user I/O bank 1 |
| ピン 22 | I/O — General purpose user I/O bank 1 |
| ピン 23 | I/O — General purpose user I/O bank 1 |
| ピン 24 | I/O — General purpose user I/O bank 1 |
| ピン 25 | TDI — JTAG Test Data In |
| ピン 26 | TMS — JTAG Test Mode Select |
| ピン 27 | TCK — JTAG Test Clock |
| ピン 28 | TDO — JTAG Test Data Out |
| ピン 29 | I/O — General purpose user I/O bank 2 |
| ピン 30 | I/O — General purpose user I/O bank 2 |
| ピン 31 | I/O — General purpose user I/O bank 2 |
| ピン 32 | GND — Ground reference |
| ピン 33 | VCCINT — Core supply voltage (1.8 V, internal regulator) |
| ピン 34 | I/O — General purpose user I/O bank 2 |
| ピン 35 | I/O — General purpose user I/O bank 2 |
| ピン 36 | I/O — General purpose user I/O bank 2 |
| ピン 37 | I/O — General purpose user I/O bank 2 |
| ピン 38 | I/O — General purpose user I/O bank 2 |
| ピン 39 | VCCIO2 — I/O bank 2 supply voltage (1.2 V to 3.3 V) |
| ピン 40 | I/O — General purpose user I/O bank 2 |
| ピン 41 | I/O — General purpose user I/O bank 2 |
| ピン 42 | I/O — General purpose user I/O bank 2 |
| ピン 43 | I/O — General purpose user I/O bank 2 |
| ピン 44 | I/O — General purpose user I/O bank 2 |
| ピン 45 | I/O — General purpose user I/O bank 2 |
| ピン 46 | I/O — General purpose user I/O bank 2 |
| ピン 47 | I/O — General purpose user I/O bank 2 |
| ピン 48 | I/O — General purpose user I/O bank 2 |
| ピン 49 | I/O — General purpose user I/O bank 3 |
| ピン 50 | I/O — General purpose user I/O bank 3 |
| ピン 51 | I/O — General purpose user I/O bank 3 |
| ピン 52 | I/O — General purpose user I/O bank 3 |
| ピン 53 | I/O — General purpose user I/O bank 3 |
| ピン 54 | I/O — General purpose user I/O bank 3 |
| ピン 55 | GND — Ground reference |
| ピン 56 | I/O — General purpose user I/O bank 3 |
| ピン 57 | I/O — General purpose user I/O bank 3 |
| ピン 58 | I/O — General purpose user I/O bank 3 |
| ピン 59 | I/O — General purpose user I/O bank 3 |
| ピン 60 | I/O — General purpose user I/O bank 3 |
| ピン 61 | VCCIO3 — I/O bank 3 supply voltage (1.2 V to 3.3 V) |
| ピン 62 | I/O — General purpose user I/O bank 3 |
| ピン 63 | I/O — General purpose user I/O bank 3 |
| ピン 64 | I/O — General purpose user I/O bank 3 |
| ピン EP | GND (Exposed Pad) — Thermal pad, must be soldered to ground copper pour |
主な用途
5M80ZE64I5N の用途: 6 件s: Bus Interface Bridging, Address Decoding and Glue Logic, Power-Up and Power-Down Sequencing, LED and Display Control Driving, I/O Expansion for Microcontrollers, Legacy Logic Consolidation.
Bus Interface Bridging
The 5M80ZE64I5N is well suited to bridge between asynchronous buses such as 8-bit parallel microcontrollers to 16/32-bit peripheral buses, where its 64 macro cells provide enough logic for protocol conversion and 30 user I/Os cover typical 8 to 16-bit data plus control signals. Its 7.9 ns propagation delay and 118.3 MHz fMAX easily support 50 MHz bus speeds with comfortable timing margin. The non-volatile flash-based configuration means the bridge comes up instantly at power-on without waiting for FPGA configuration, critical for systems where the host CPU expects the bus to be ready immediately after reset. Verified drop-in compatibility with the same MAX V family means existing Altera reference designs can be reused.
おすすめ
Address Decoding and Glue Logic
The 5M80ZE64I5N consolidates discrete 74-series TTL glue logic - address latches, chip-select decoders, and interrupt arbiters - into a single non-volatile device. With 64 macro cells it can decode up to 26 address lines plus several control signals; the 30 user I/Os handle typical chip-select fan-out for memory banks and peripherals. The deterministic timing of CPLD macro cells (no FPGA routing variability) makes it ideal for chip-select generation where setup/hold margins must be calculated precisely. Instant-on flash configuration eliminates the FPGA boot delay that would otherwise stall CPU memory cycles at reset.
おすすめ
Power-Up and Power-Down Sequencing
The 5M80ZE64I5N generates precise rail-sequencing signals for multi-rail systems where power must be applied in a specific order to prevent latch-up or in-rush damage. Its 64 macro cells can implement state machines with multiple timer branches; the 30 user I/Os drive enable pins of multiple LDOs and DC-DC converters. Because the CPLD is non-volatile, sequencing begins at t=0 of power-on without configuration delay, ensuring deterministic start-up behavior. Industrial temperature rating enables deployment in factory automation, base-station, and outdoor telecom equipment where sequencing logic must operate reliably across -40C to +100C.
おすすめ
LED and Display Control Driving
The 5M80ZE64I5N drives multiplexed LED matrices, character LCDs, and seven-segment displays using Charlieplexing or direct multiplexing. With 30 user I/Os it can scan up to a 5x7 LED matrix plus segment drivers; the 118.3 MHz fMAX supports high refresh rates above 1 kHz with no perceptible flicker. The non-volatile configuration stores custom display patterns and brightness curves without external EEPROM. Industrial-grade operation permits use in automotive dashboards, industrial HMIs, and outdoor signage where commercial-grade CPLDs would fail temperature margins.
おすすめ
I/O Expansion for Microcontrollers
The 5M80ZE64I5N expands the limited GPIO count of low-pin-count microcontrollers by adding 30 user I/Os accessible via SPI or I2C through a serial-to-parallel interface. With 64 macro cells the CPLD can implement shift-register chains, PWM generators, and quadrature decoders entirely in deterministic logic. Its 7.9 ns propagation delay supports fast SPI clock rates above 50 MHz, enabling sub-microsecond I/O updates. The 1.2 V to 3.3 V VCCIO range allows direct connection to 1.8 V, 2.5 V, and 3.3 V MCUs without level shifters, simplifying PCB layout.
おすすめ
Legacy Logic Consolidation
The 5M80ZE64I5N replaces aging PAL, GAL, and 74-series TTL chips on legacy boards, reducing component count, PCB area, and power consumption. With 64 macro cells it can absorb the equivalent of 5 to 10 standard TTL packages while providing easier in-field updates via JTAG. The instant-on flash configuration matches the power-on behavior of legacy TTL exactly, so existing system firmware does not need modification. Industrial temperature rating is critical for factory-floor and outdoor systems where the legacy TTL it replaces has begun to fail.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: 5M80ZE64I5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | 5M80ZE64C5N | 5M80ZE64A5N | 5M40ZE64I5N | 5M80ZE64C4N | 5M160ZE64I5N | 5M570ZE64I5N |
|---|---|---|---|---|---|---|---|
| Package | EQFP-64 (9x9 mm) | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Macro Cells | 64 | 64 | 64 | 32 | 64 | 128 | 570 |
| User I/Os | 30 | 30 | 30 | 30 | 30 | 34 | 34 |
| fMAX (Internal) | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz | Lower (C4 grade) | 118.3 MHz | 152 MHz |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +125C (Automotive) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) |
| AEC-Q100 Automotive | No | No | Yes | No | No | No | No |
| Unit Price (qty 100, USD) | 5.20 | 4.85 | 8.40 | 4.30 | 4.95 | 7.50 | 18.20 |
主な差別化要因
- Lowest cost industrial-grade MAX V variant at 64 macro cells （vs 5M160ZE64I5N)
- Industrial temperature rating with full -40C to +100C operating range （vs 5M80ZE64C5N)
- Non-volatile flash configuration enables instant-on at power-up （vs Lattice ispMACH 4000V)
設計ノート
The EQFP-64 package includes an exposed thermal pad (pin EP) on the underside that MUST be soldered to a copper pour on the PCB for proper thermal dissipation. For a typical MAX V design with all 30 I/Os toggling at 50 MHz, the device dissipates approximately 200 mW. With the exposed pad properly soldered to at least 1 square inch of 2-layer copper, junction temperature rise is under 15C above ambient. Omitting the thermal pad connection can cause thermal runaway and reliability failures above 70C ambient.
Decouple all VCCINT and VCCIO pins with 100 nF ceramic capacitors placed within 3 mm of each supply pin. Use one bulk 10 uF tantalum or ceramic capacitor per supply rail. The exposed pad (EP) requires an array of thermal vias (typically 0.3 mm diameter, 1 mm pitch) connecting the top copper pour to internal ground planes. Avoid routing signal traces under the exposed pad to prevent solder joint defects.
Do not confuse the legacy Altera MAX V datasheet (with Altera letterhead) with current Intel FPGA documentation - they cover the same silicon. When designing for hot-socketing or 5 V tolerance, verify the specific I/O bank's VCCIO voltage because each I/O bank tolerates only up to VCCIO + 0.7 V or 4.0 V maximum, whichever is lower. Exceeding this rating damages the I/O cells permanently. Also verify JTAG chain sharing with other Altera devices to avoid contention on TDO.
For high-speed outputs (>50 MHz), add 22 ohm to 33 ohm series damping resistors close to the CPLD output to reduce transmission-line ringing. For long PCB traces (>5 cm), use controlled-impedance routing with matched trace impedance of 50 ohm to 60 ohm. Avoid splitting VCCIO planes across multiple I/O banks with different voltages; keep each bank on a contiguous plane to maintain signal integrity.
コンプライアンス情報
RoHS and REACH compliant per Intel / Altera product declaration. Not AEC-Q100 qualified - choose 5M80ZE64A5N for automotive. Lead-free Pb-free matte-tin finish.
