A54SX72A-FGG484M - 108K Gate Antifuse FPGA, 484 FBGA | Microchip
部品番号: A54SX72A-FGG484M ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3650.86 | $3,650.86 |
| 10 | $3468.32 | $34,683.20 |
| 100 | $3285.77 | $328,577.00 |
| 500 | $3103.23 | $1,551,615.00 |
| 1,000 | $2920.69 | $2,920,690.00 |
A54SX72A-FGG484M 概要
A field-programmable gate array (FPGA) is an integrated circuit that implements user-defined digital logic through programmable interconnect and configurable logic blocks, sitting within the broader hierarchy of programmable logic devices (PLDs) alongside CPLDs and structured ASICs. The SX-A family uses antifuse (one-time programmable) technology, which means the configuration is permanently written at programming time rather than stored in an SRAM configuration cell.
Key features include 108K system gates (72K typical usable gates), 2.5 V core supply with a 2.25 V to 5.25 V supply range for the mixed-voltage I/O structure, 0.25 um CMOS antifuse process technology, and a combinatorial logic delay of approximately 1.8 ns per module with 1.5 ns class I/O switching performance.
The antifuse architecture provides three significant engineering advantages over SRAM FPGAs: near-zero standby power, inherent configuration bitstream security (no readback path exists), and immunity to configuration upsets, making the device well suited to harsh environments. The A54SX72A-FGG484M is rated for a wide -55C to +125C (TC) operating temperature range and is RoHS3 compliant and lead free.
Typical applications include aerospace and defense logic integration, industrial control systems, communications bridge logic, bus interface glue logic, and single-chip integration of multiple discrete ASIC/SSI/MSI functions where configuration security and low power matter.
Design consideration: because antifuse devices are one-time programmable, final design verification must be completed using device programming and simulation before committing silicon; no post-deployment reconfiguration is possible.
This page synthesizes distributor pricing, same-package drop-in alternatives across speed and temperature grades, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: A54SX72A-FGG484M — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: A54SX72A-FGG484M （同一形状・フットプリント） — 相違点: Package, RoHS Status, Process Technology, System Gates, Speed Grade.
クイック比較ツール — 並列比較する代替部品を選択:
A54SX72A-FG484
✅ ドロップイン✓ 在庫あり
$88.1 / 個
データシートを見る →A54SX72A-1FGG484I
✅ ドロップイン✓ 在庫あり
$225 / 個
データシートを見る →A54SX72A-2FGG484I
✅ ドロップイン✓ 在庫あり
$112 / 個
データシートを見る →A54SX72A-FFGG484M
✅ ドロップイン📋 参考代替品（カタログ未掲載）
A54SX32A-1FGG484
✅ ドロップイン✓ 在庫あり
$1 / 個
データシートを見る →A54SX72A-FGG484M 最大定格＆電気的特性
| Family | SX-A (antifuse FPGA) |
| System Gates | 108000 |
| Typical Usable Gates | 72000 |
| Logic Cells / Modules | 6036 |
| Number of I/O | 360 |
| Maximum Toggle Frequency | 217 MHz |
| Combinatorial Delay | 1.8 ns per logic module |
| I/O Switching Speed | 1.5 ns |
| Core Supply Voltage | 2.5 V |
| Supply Voltage Range | 2.25 V to 5.25 V |
| Process Technology | 0.25 um CMOS antifuse |
| Programming Type | One-time programmable (antifuse) |
| 動作温度 | -55C to +125C (TC) |
| パッケージ | 484-FPBGA (27x27 mm), 1 mm pitch |
| 実装タイプ | Surface Mount |
| Packaging | Tray |
| RoHS ステータス | ROHS3 Compliant |
| Lead Free | Yes |
A54SX72A-FGG484M 484-fpbga (27x27 mm), 1 mm pitch ピン配置ガイド
A54SX72A-FGG484M (484-fpbga (27x27 mm), 1 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: A54SX72A-FGG484M.
詳細は データシート をご参照ください。
主な用途
A54SX72A-FGG484M の用途: 6 件s: Aerospace and Defense Logic Integration, Industrial Control and Automation, Communications and Networking Bridge Logic, Single-Chip ASIC/SSI/MSI Integration, Medical Equipment Control Logic, Test and Measurement Instrumentation.
Aerospace and Defense Logic Integration
The A54SX72A-FGG484M fits aerospace and defense payloads because its antifuse configuration cannot be read back, altered by SEU-induced configuration loss, or overwritten in the field - a property SRAM FPGAs cannot offer. With 108K system gates, 6036 logic modules, and a -55C to +125C (TC) military temperature rating, it consolidates bus interface, protocol glue, and control logic that would otherwise occupy multiple ASICs or PALs. The 2.25 V to 5.25 V supply tolerance simplifies integration on legacy 5 V and 3.3 V backplanes common in avionics. Because the configuration is permanently written at programming time, the device adds no configuration PROM, reducing board area and removing a common single-point failure mode in flight hardware.
おすすめ
Industrial Control and Automation
In industrial controllers, motor-drive sequencing logic, and safety-adjacent interlock circuits, the A54SX72A-FGG484M provides deterministic, fixed-function behavior: once programmed, the antifuse fabric never changes state configuration, eliminating the boot-time configuration load and the associated watchdog complexity required with SRAM FPGAs. The 217 MHz toggle capability and 1.8 ns combinatorial delay support fast counter, encoder, and PWM processing, while 360 user I/O allows a single device to absorb sensor, actuator, and fieldbus interface logic. Its RoHS3-compliant green FBGA package and wide 2.25 V to 5.25 V supply range ease integration into mixed-voltage industrial cabinets, and near-zero standby power suits always-on monitoring nodes.
おすすめ
Communications and Networking Bridge Logic
The SX-A architecture achieves fast, predictable routing with 1.5 ns class I/O switching and up to 217 MHz internal toggle rates, making the A54SX72A-FGG484M effective for protocol bridge, multiplexer, and backplane-interface logic in telecom and networking equipment. Designers use it to convert between legacy bus standards (PCI-style parallel interfaces, TDM streams) and custom glue functions where a modern SERDES-equipped FPGA is unnecessary overhead. The antifuse fabric's immunity to configuration upset improves link availability in unattended remote equipment, and the 484-ball 27x27 mm FBGA provides 360 I/O for wide parallel data paths within a 9 cm-squared footprint, simplifying high-layer-count board routing around the device.
おすすめ
Single-Chip ASIC/SSI/MSI Integration
A primary use case for the SX-A family is integrating dozens of discrete SSI/MSI devices, PALs, GALs, and small ASICs into one low-cost, single-chip solution, exactly the positioning Microchip describes for SX-A. The A54SX72A-FGG484M offers 108K gates and 6036 modules, enough to consolidate address decoders, state machines, bus arbiters, and timing generators at once. Consolidation cuts board area, BOM count, and assembly cost while improving reliability through fewer solder joints. Because the device is one-time programmable, production units behave identically to a masked ASIC, and the antifuse bitstream is physically unobservable - an advantage over SRAM FPGAs when protecting proprietary glue-logic designs from cloning.
おすすめ
Medical Equipment Control Logic
Diagnostic imaging, patient-monitoring, and laboratory instrumentation platforms use the A54SX72A-FGG484M for fixed control, sequencing, and interface logic where deterministic behavior and configuration integrity matter for predictable system operation. The 2.5 V core with 2.25 V to 5.25 V I/O tolerance connects directly to 5 V legacy sensor boards and 3.3 V processor subsystems without level translators on many banks, and 360 user I/O handles high channel-count sensor arrays. Near-zero static power keeps idle-state consumption low in portable and standby modes. Note that the M temperature grade exceeds medical requirements (-55C to +125C TC), so designers seeking cost reduction can evaluate the standard-grade A54SX72A-FG484 in the same footprint after thermal review.
おすすめ
Test and Measurement Instrumentation
Bench instruments, automated test equipment, and data-acquisition front ends employ the A54SX72A-FGG484M as timing-generator, trigger, and bus-interface logic. The 217 MHz maximum toggle rate and 1.8 ns module delay support nanosecond-class trigger timing, while the antifuse fabric's deterministic routing yields repeatable propagation delays unit-to-unit - useful when instruments must meet published timing specifications across a production run. The 484-FBGA's 360 I/O terminate wide counter and formatter buses directly. Because configuration is permanent, instruments power into an immediately operational state with no configuration controller, reducing boot time and removing an FPGA-configuration failure mode from the service-return analysis.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: A54SX72A-FGG484M — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | A54SX72A-FG484 | A54SX72A-1FGG484I | A54SX72A-2FGG484I | A54SX32A-1FGG484 |
|---|---|---|---|---|---|
| Package | 484-FBGA (27x27 mm) | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same | 484-FBGA - same |
| Brand | Microchip Technology (Microsemi) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 108000 | 108000 | 108000 | 108000 | 54000 |
| Operating Temperature | -55C to +125C (TC) | Standard commercial/industrial grade | Industrial (I) grade | Industrial (I) grade | Standard grade |
| Supply Voltage | 2.5 V core, 2.25 V - 5.25 V range | 2.5 V core, 2.25 V - 5.25 V | 2.5 V core, 2.25 V - 5.25 V | 2.5 V core, 2.25 V - 5.25 V | 2.5 V core, 2.25 V - 5.25 V |
| Programming Type | One-time programmable antifuse | Antifuse OTP | Antifuse OTP | Antifuse OTP | Antifuse OTP |
主な差別化要因
- Military temperature range （vs A54SX72A-FG484)
- Fastest speed grade in the FGG484 family （vs A54SX72A-2FGG484I)
- Double the logic capacity of the smaller same-footprint part （vs A54SX32A-1FGG484)
- Honest trade-off: no field reconfiguration （vs A54SX72A-1FGG484I)
設計ノート
The A54SX72A-FGG484M is one-time programmable: once antifuses are blown, the device cannot be erased or reprogrammed. Complete functional simulation (timing-annotated, in Libero/ModelSim) and, ideally, validation on a lower-cost same-family device before committing the FGG484M. Never treat an SX-A part as an engineering sample for iterative debugging - budget one device per programming attempt plus spares, and confirm the final I/O assignment report matches the PCB netlist before programming.
Supply the core at a regulated 2.5 V and respect the 2.25 V to 5.25 V envelope for I/O banks. Because antifuse FPGAs draw near-zero static current, power budgeting is dominated by dynamic switching; estimate core current from toggle-rate activity rather than datasheet quiescent figures. Decouple each supply ball with 0.1 uF ceramic capacitors placed within 2 mm of the ball via, and add bulk 10 uF per rail. Verify 5 V-tolerant I/O bank rules in the SX-A datasheet when mixing 5 V and 3.3 V interfaces.
The 484-ball FBGA uses a 1 mm ball pitch in a 27x27 mm body, requiring a via-in-pad or dog-bone fanout strategy on at least a 6-layer board. Route power and ground on dedicated inner planes; the 360 user I/O at high toggle rates needs a solid return path to limit simultaneous-switching noise. Define the fixed power/ground/JTAG/programming balls first from the SX-A datasheet pinout tables, then assign user I/O in Libero Designer to match your PCB routing before layout release, since the ballout is design-dependent.
Estimated: at 0.25 um CMOS with near-zero static power and moderate toggle activity, junction dissipation for typical glue-logic designs is well under 1 W, manageable by natural convection from the 27x27 mm BGA body plus 2-oz copper ground planes. For designs toggling a large fraction of the fabric at high frequency, compute dynamic power with the Microchip Libero power calculator and verify theta-JA against the SX-A package thermal appendix; do not assume the M-grade temperature ceiling of +125C TC permits unrestricted dissipation.
コンプライアンス情報
ROHS3 Compliant and lead free per Microchip USA product data. REACH, halogen-free, and conflict-minerals declarations should be confirmed from Microchip's official material-declaration portal for the specific date code.
