Analog Devices

AD7485BST - 14-Bit 1 MSPS SAR ADC | Analog Devices

部品番号: AD7485BST ✓ 生産中
48-LQFP (7x7 mm) Package
MOQ: 1 |

AD7485BST 概要

The Analog Devices AD7485BST is a 14-bit, single-channel, successive-approximation register analog-to-digital converter with a serial interface, a conversion throughput rate of up to 1 MSPS, and a 48-lead LQFP package. The converter combines factory trimming for low offset and gain errors with low input-referred noise and a wide-bandwidth track-and-hold circuit capable of handling input frequencies above 40 MHz. Its normal-mode power consumption is 70 mW, making it suitable for compact, high-speed data-acquisition systems.

A successive-approximation ADC, commonly called a SAR ADC, converts an analog input into digital code by performing a sequence of comparisons against a reference voltage. The AD7485 belongs to the ADC hierarchy, which sits within data-acquisition and signal-conversion integrated circuits. Its SAR architecture provides predictable conversion timing and a compact serial interface, allowing sampled measurements to be transferred efficiently to a controller, DSP, FPGA, or data logger.

Key characteristics include 14-bit nominal resolution, single-channel conversion, throughput up to 1 MSPS, and serial data access. Factory trimming reduces DC error sources, including input nonlinearity, offset, and gain error. The low-noise, wide-bandwidth track-and-hold front end allows the converter to capture rapidly changing analog signals while preserving useful signal bandwidth. Normal-mode power dissipation of 70 mW supports low-power instrumentation without requiring a high-performance external converter.

The AD7485BST is particularly useful when designers need accurate sampling from a restricted analog input range. The serial interface reduces the number of parallel signal paths on a PCB and can help conserve board area in dense acquisition systems. Its 48-LQFP package also provides more pins than a basic single-channel converter, allowing the device to expose power, reference, analog input, digital interface, and control functions without multiplexing compromises.

Typical applications include industrial process monitoring, sensor signal acquisition, portable measurement instruments, medical monitoring equipment, and embedded control systems that sample moderate-bandwidth analog waveforms. In these systems, the AD7485 can sit between an analog front end and a digital processor, with its serial output handled by an SPI-compatible controller or dedicated data-capture logic.

PCB design should preserve the converter's analog signal integrity and provide stable reference and supply connections close to the device. Keep the analog input route short, place decoupling capacitors at the supply pins, and use a clean reference source with appropriate grounding. When timing the serial interface, account for acquisition time, conversion time, and data-transfer latency rather than assuming the maximum sample rate is available for every input condition.

This product page brings together the manufacturer's converter specifications, verified pricing evidence, package information, a controlled replacement assessment, and practical application guidance. The AD7485BST is best understood as a low-power, 14-bit SAR ADC for compact systems that need accurate single-channel sampling without a parallel data bus.

ドロップイン代替品: AD7485BST — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

AD7485BSTZ

✅ ドロップイン
📦 48-LQFP (7x7 mm)
Same 14-bit SAR function, 1 MSPS rate, serial interface, and 48-LQFP footprint; order-code delivery format differs.

📋 参考代替品(カタログ未掲載)

AD7485BST 最大定格&電気的特性

ADC Type Successive-approximation register ADC
分解能 14 bit
Number of Channels 1 channel
Throughput Rate Up to 1 MSPS
Input Signal Type Single-ended analog input
Track-and-Hold Input Bandwidth Greater than 40 MHz
インターフェース Serial interface
Normal-Mode Power Consumption 70 mW
Factory-Trimmed DC Accuracy Low INL, offset, and gain errors
パッケージ 48-LQFP (7x7 mm)
実装タイプ Surface mount

AD7485BST 48-lqfp (7x7 mm) ピン配置ガイド

AD7485BST (48-lqfp (7x7 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

AD7485BST の 48-lqfp (7x7 mm) パッケージピン配置図

詳細なピン配置データはありません: AD7485BST.

詳細は データシート をご参照ください。

主な用途

AD7485BST の用途: 6 件s: Industrial Process Monitoring, Portable Medical Monitoring, Sensor Signal Acquisition, Embedded Data Logging, Waveform Capture, Communication and RF Monitoring.

🏭

Industrial Process Monitoring

The AD7485BST fits industrial process-monitoring systems that must digitize a conditioned pressure, temperature, or level signal with 14-bit resolution. Its throughput rate of up to 1 MSPS provides ample margin for many slow sensor channels, while the serial interface reduces parallel routing across the controller board. Factory trimming minimizes offset and gain contributions, supporting repeatable measurements after system calibration. The 70 mW normal-mode consumption is valuable in distributed monitoring equipment with limited thermal capacity. Use a protected analog front end, anti-alias filtering, and isolated grounding where the sensor is exposed to industrial transients.

💊

Portable Medical Monitoring

The AD7485BST is appropriate for portable medical-monitoring equipment that converts a conditioned biosensor or instrumentation signal into a 14-bit digital result. Its low normal-mode power consumption of 70 mW helps limit thermal loading in battery-operated instruments, and the serial interface allows compact controller integration. The low-noise, wide-bandwidth track-and-hold circuit supports acquisition from higher-bandwidth physiological front ends that require anti-alias filtering. The converter should sit behind calibrated gain, protection, and filtering stages, with leakage, patient-safety isolation, and grounding handled by the complete analog system rather than by the ADC alone.

🧩

Sensor Signal Acquisition

The AD7485BST supports sensor acquisition boards that need consistent 14-bit conversion without a wide parallel data bus. A 1 MSPS maximum rate allows the design to sample fast transients as well as slowly changing sensor outputs, while the serial interface simplifies connection to an embedded controller or FPGA. Factory trimming helps lower fixed offset and gain error before calibration. The input network should present a stable drive to the track-and-hold stage and include filtering appropriate to the sensor bandwidth. For high-impedance sensors, leakage, settling time, guarding, and reference stability are critical system-level considerations.

🖥️

Embedded Data Logging

The AD7485BST is well suited to embedded data loggers that acquire one analog channel and transfer each conversion through a serial interface. Its 14-bit resolution supports measurement accuracy, and its low 70 mW normal-mode power helps suit compact unattended equipment. The one-channel architecture simplifies synchronization and calibration compared with a multiplexed converter. A microcontroller can issue conversion commands, read serial data, and record scaled engineering units. Designers should account for serial timing, digital settling at the source, reference drift, and the number of samples required to average noise before making a measurement decision.

📺

Waveform Capture

The AD7485BST can capture waveforms when the system requires 14-bit resolution and a sampling rate up to 1 MSPS. Its wide-bandwidth track-and-hold circuit can handle input frequencies above 40 MHz, allowing the front end to present a usable signal to the converter before acquisition. The design still needs sufficient analog bandwidth, gain, and anti-alias filtering so that aliasing and amplitude loss do not obscure the measured waveform. Serial readout reduces PCB trace count and makes the converter practical for compact instrumentation using an FPGA or dedicated digital controller.

🌐

Communication and RF Monitoring

The AD7485BST is applicable to communication or RF monitoring systems that sample an attenuated, filtered detector or measurement signal. The track-and-hold input bandwidth exceeding 40 MHz and the 1 MSPS conversion capability allow it to capture selected envelope, power, or calibration measurements rather than the carrier directly. Its serial interface keeps the converter practical in a mixed-signal board containing a processor or FPGA. The RF detector, anti-alias filter, gain stage, and reference must provide adequate bandwidth and dynamic range. Designers should also verify that the selected 14-bit converter meets the required amplitude resolution after all analog losses.

What is the AD7485BST?
The AD7485BST is a single-channel, 14-bit successive-approximation ADC manufactured by Analog Devices in a 48-LQFP package. According to the manufacturer datasheet, it supports serial-interface conversion rates up to 1 MSPS and uses a low-noise, wide-bandwidth track-and-hold front end that can handle input frequencies above 40 MHz. Its normal-mode power consumption is 70 mW, making it suitable for compact industrial, medical, embedded, and instrumentation systems.
What are the key specifications of AD7485BST that engineers should know?
The AD7485BST provides 14-bit resolution, one analog input, serial data access, throughput up to 1 MSPS, and normal-mode power consumption of 70 mW. The Analog Devices datasheet also identifies a low-noise, wide-bandwidth track-and-hold front end for input frequencies above 40 MHz. Factory trimming improves DC accuracy by reducing integral nonlinearity, offset error, and gain error. The device is packaged in a 48-LQFP measuring 7 x 7 mm.
Where can I download the AD7485BST datasheet PDF?
The official AD7485BST datasheet PDF is available from Analog Devices at the manufacturer data-sheet link on this page. The document describes the converter's 14-bit architecture, 1 MSPS maximum throughput, serial interface, track-and-hold performance, factory-trimmed DC accuracy, electrical characteristics, and package information. Use the manufacturer document when assigning supply voltage, reference voltage, input range, decoupling, timing, and PCB layout requirements.
Where can I find the AD7485BST pinout?
The AD7485BST pinout is defined in the pin-configuration section of the official Analog Devices AD7485 datasheet. The component uses a 48-lead LQFP package, so a complete board design should assign all 48 physical leads before routing begins. Use the datasheet pin table to identify analog, reference, supply, ground, serial-interface, and control signals because the complete pin names are not printed on the product listing.
What can replace the AD7485BST?
The AD7485BSTZ is the clearest drop-in replacement identified for the AD7485BST because it retains the same Analog Devices family, 14-bit SAR architecture, 1 MSPS rate, serial interface, and 48-LQFP package. The principal difference is the order code and associated delivery format. A replacement should still be checked against temperature range, supply voltage, reference voltage, timing, and production requirements before it is approved for an existing PCB.
Is the AD7485BST the same as the AD7485BSTZ?
The AD7485BST and AD7485BSTZ are functionally equivalent members of the AD7485 family and use the same 48-LQFP footprint with matching 14-bit, 1 MSPS SAR conversion characteristics. The order-code suffix distinguishes their packaging or delivery treatment rather than the converter's fundamental function. According to the cross-reference information, terminals and packages are consistent and replacement does not require modification of the existing PCB.
Where can I buy the AD7485BST online?
The AD7485BST can be requested through the Request a Quote form on this page, where the current availability, order quantity, and lead time should be confirmed for the exact AD7485BST order code. The verified listing identifies the part as a 48-LQFP, 14-bit ADC, but current stock status can vary by region and order quantity. Use the form for a transaction-ready quotation rather than relying on an outdated availability snapshot.
What is the price of the AD7485BST?
Current pricing for the AD7485BST should be obtained through the Request a Quote form on this page because commercial prices and available quantities may change. The verified product listing contains quantity-break pricing for the exact MPN, which is retained in the structured pricing fields for reference. A formal quote confirms the applicable unit price, order breaks, packaging, tax treatment, and delivery terms for the proposed order.
What is the lead time for the AD7485BST?
The current lead time for the AD7485BST must be confirmed through the Request a Quote form on this page. Lead time depends on the requested quantity, package delivery option, production schedule, and current component availability. The product is shown as available in a verified listing, but that snapshot does not establish a guaranteed lead time for a new order, so production planning should use the quotation response.
Is the AD7485BST in stock?
The AD7485BST has an availability listing, but current stock should be confirmed through the Request a Quote form before a build schedule is committed. Distributor inventory can change quickly, and a marketplace or broker listing may not represent the same stocking program as a direct authorized channel. The quote response is the appropriate way to establish current stock, allocated quantity, and expected lead time.
AD7485BST vs AD7485BSTZ: which one is better for a new design?
The AD7485BSTZ is the better fit when it is the exact order code approved for production, because it preserves the AD7485's 14-bit SAR function, 1 MSPS throughput, serial interface, and 48-LQFP footprint. The AD7485BST remains suitable when its specified ordering and delivery configuration matches the procurement plan. Both should be compared for temperature grade, lifecycle status, traceability requirements, and the manufacturer's latest datasheet before a final BOM release.
When should I choose AD7485BST over an alternative converter?
Choose the AD7485BST when a system requires a 14-bit single-channel SAR ADC with serial output, throughput up to 1 MSPS, and a 48-LQFP footprint. It is particularly appropriate where low normal-mode power consumption of 70 mW and factory-trimmed DC accuracy matter. Choose another converter only when the required resolution, input bandwidth, reference architecture, interface timing, package, qualification grade, or production lifecycle differs materially.
Is AD7485BST suitable for sensor measurement and industrial data acquisition?
The AD7485BST is suitable for sensor measurement and industrial data-acquisition systems that need 14-bit resolution and conversion rates up to 1 MSPS. Its low-noise, wide-bandwidth track-and-hold front end can handle input frequencies above 40 MHz, while 70 mW normal-mode power supports compact equipment. The analog front end must still provide suitable excitation, conditioning, anti-alias filtering, grounding, and protection for the specific sensor.
What is the best Analog Devices equivalent for the AD7485BST?
The AD7485BSTZ is the best-supported Analog Devices equivalent because the manufacturer-family cross-reference describes it as a complete replacement with consistent performance, terminals, and package. It uses the same 48-LQFP footprint and retains the 14-bit, 1 MSPS serial SAR conversion configuration. Approval still requires checking the exact operating-temperature range, supply limits, reference requirements, and lifecycle conditions against the original design.
How should the AD7485BST be used in a high-speed measurement circuit?
Use the AD7485BST after a suitable analog conditioning stage, with the converter's track-and-hold input driven by a low-impedance source and an appropriate anti-alias filter. The converter can acquire input frequencies above 40 MHz and convert at up to 1 MSPS, but the complete acquisition chain must preserve amplitude accuracy, bandwidth, and timing. Follow the manufacturer datasheet for decoupling, reference layout, grounding, input drive, and serial-interface timing.

エンジニアリング参考データ: AD7485BST — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the AD7485BST for a single-channel system that requires 14-bit resolution, serial data transfer, conversion rates up to 1 MSPS, and a 48-LQFP footprint. Its low 70 mW normal-mode consumption is useful in portable and thermally constrained equipment, while factory trimming reduces fixed offset and gain errors. Choose the AD7485BSTZ when it is the preferred order code for production: it preserves the same 14-bit SAR function, 1 MSPS rate, serial interface, and 48-LQFP package, so no PCB modification is expected. Before approving either part, verify operating temperature, supply and reference limits, acquisition timing, interface timing, qualification requirements, and lifecycle status in the latest manufacturer documentation. A different converter should be selected only if resolution, input bandwidth, channel count, reference architecture, digital interface, or package requirements exceed what the AD7485 family provides.

代替品との比較

パラメータ この製品 AD7485BSTZ
Package 48-LQFP (7x7 mm) 48-LQFP (7x7 mm)
Brand Analog Devices Analog Devices
Resolution 14 bit 14 bit
ADC Architecture Successive-approximation register ADC Successive-approximation register ADC
Number of Channels 1 channel 1 channel
Throughput Rate Up to 1 MSPS Up to 1 MSPS
Interface Serial Serial
Input Frequency Capability Track-and-hold input frequencies above 40 MHz Track-and-hold input frequencies above 40 MHz
Factory-Trimmed DC Accuracy Low INL, offset, and gain errors Low INL, offset, and gain errors

主な差別化要因

  • Same-footprint family replacement with unchanged conversion specifications (vs AD7485BSTZ)
  • Low normal-mode power supports compact data-acquisition systems (vs AD7485BSTZ)
  • Wide-bandwidth acquisition front end (vs AD7485BSTZ)

設計ノート

Place the AD7485BST close to the signal source and keep the analog input route short. The track-and-hold input must see a low-impedance source with adequate settling behavior; long traces and parasitic capacitance can degrade acquisition accuracy. Use a ground plane that supports the analog return path, avoid switching-node routing beneath the converter, and separate noisy digital return currents from the reference and signal grounds. The manufacturer datasheet should govern the final decoupling and grounding arrangement.

Use the supply and reference connections specified by the manufacturer datasheet and place their decoupling components close to the associated device pins. Reference quality directly affects conversion accuracy, so avoid routing the reference through digital switching paths and provide local return-current control. Estimated normal-mode dissipation is 70 mW; this figure is a manufacturer specification rather than a maximum-loss calculation. Confirm worst-case supply, reference, and ambient conditions before sizing copper and thermal margins.

Treat the analog input as a precision acquisition path even though the converter supports input frequencies above 40 MHz. Include an anti-alias filter and verify source settling at the selected sampling rate. The serial interface reduces parallel-bus routing, but digital timing still requires adequate signal-integrity margin across board and cable distances. Confirm acquisition time, conversion time, clock period, and data-transfer timing from the official datasheet before fixing the control firmware.

Avoid treating the 1 MSPS headline rate as a guarantee that every input source can be sampled accurately. Input bandwidth, source impedance, reference stability, filtering, timing margins, and the acquisition interval all affect usable performance. Also verify the exact order code before layout approval: AD7485BST and AD7485BSTZ share the same 48-LQFP footprint, but their order-code treatment differs. Review the manufacturer ordering guide for temperature grade and delivery configuration.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The verified product and distributor snippets do not explicitly state the compliance status of the exact AD7485BST order code. Confirm declarations, temperature grade, and automotive qualification using the current Analog Devices product documentation and ordering information.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

AD7485BST datasheet AD7485BST pinout AD7485BST datasheet pdf AD7485BST equivalent AD7485BST replacement AD7485BST cross reference AD7485BST vs AD7485BSTZ AD7485BST footprint AD7485BST spice model AD7485BST price AD7485BST stock Analog Devices AD7485BST AD7485BST 1 MSPS ADC AD7485BST 48-LQFP AD7485BST industrial data acquisition

関連部品&用語

Analog Devices AD7485BST AD7485BSTZ AD7485 successive-approximation register ADC SAR ADC analog-to-digital converter ADC data-acquisition integrated circuit semiconductor 14-bit resolution 1 MSPS throughput serial interface track-and-hold circuit 40 MHz input bandwidth 70 mW power consumption factory trimming integral nonlinearity offset error gain error 48-LQFP LQFP package family surface-mount package industrial process monitoring medical monitoring
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示