Texas Instruments

ADS7816PC - 12-Bit 200kHz Micropower SAR ADC | Texas Instruments

部品番号: ADS7816PC ✓ 生産中
100mV to 5V Vdss 3uA maximum Id 8-pin plastic mini-DIP Package
MOQ: 1 |

ADS7816PC 概要

The Texas Instruments ADS7816PC is a 12-bit, 200kHz sampling successive-approximation analog-to-digital converter with a differential input, synchronous serial interface, and automatic power-down function. It accepts a reference voltage from 100mV to 5V and is housed in an 8-pin plastic mini-DIP package. The device is designed for low-power data acquisition, remote sensing, instrumentation, and isolated measurement systems.

An ADC is an analog-to-digital converter, a type of data-converter IC that converts an analog voltage into a digital code for processing, measurement, or transmission. The ADS7816 belongs to the SAR ADC family, which uses a successive-approximation conversion process. Its differential input architecture supports measurement of a voltage difference between two analog nodes, making it useful when signal integrity, common-mode rejection, or referencing to a sensor midpoint is important.

The ADS7816PC provides a 200kHz sampling rate and 12-bit resolution, corresponding to 4096 possible digital codes. The manufacturer states that the reference voltage can vary from 100mV to 5V, with corresponding resolution from 24uV to 1.22mV. The device also supports automatic power-down, with a maximum power-down current of 3uA, helping preserve energy in intermittent measurement systems. A synchronous serial interface provides a compact connection to a controller or digital signal processor.

The serial interface and differential input structure are suitable for designs requiring predictable conversion and digital data transfer without a parallel ADC bus. The 8-pin mini-DIP package is useful for through-hole prototypes, educational platforms, industrial control assemblies, and legacy system upgrades. The converter’s low-power operating mode is particularly advantageous when the acquisition system wakes periodically to measure an analog quantity and then returns to a low-consumption state.

Typical applications include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, battery-powered instrumentation, and remote or isolated data-acquisition systems. In these applications, the differential input can reduce sensitivity to ground noise when the sensor output is referenced to a biased midpoint. The serial output also reduces the number of signal paths required between the converter and the system controller.

When laying out the circuit, keep the analog input, reference, and ground connections short and place input and reference bypass capacitors close to their corresponding pins. Use the manufacturer pin-description table when assigning PCB tracks, and confirm that the selected reference voltage provides sufficient analog input range for the source. For low-power systems, verify wake-up timing and serial-interface timing after power-down before relying on automatic shutdown during the measurement cycle.

ドロップイン代替品: ADS7816PC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

ADS7816PC 最大定格&電気的特性

分解能 12 bit
サンプリングレート 200kHz
Conversion Architecture Successive approximation (SAR)
Input Type Differential, 1 input
Reference Voltage Range 100mV to 5V
Resolution at 100mV Reference 24uV
Resolution at 5V Reference 1.22mV
Power-Down Current 3uA maximum
インターフェース Synchronous serial interface
パッケージ 8-pin plastic mini-DIP
実装タイプ Through-hole

ADS7816PC ピン構成

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
ピン 1 [DATA_NEEDED: pin 1 name]
ピン 2 [DATA_NEEDED: pin 2 name]
ピン 3 [DATA_NEEDED: pin 3 name]
ピン 4 [DATA_NEEDED: pin 4 name]
ピン 5 [DATA_NEEDED: pin 5 name]
ピン 6 [DATA_NEEDED: pin 6 name]
ピン 7 [DATA_NEEDED: pin 7 name]
ピン 8 [DATA_NEEDED: pin 8 name]

主な用途

ADS7816PC の用途: 6 件s: Industrial process monitoring, Laboratory instrumentation, Battery-powered sensor acquisition, Remote data acquisition, Embedded control and monitoring, Educational and legacy instrumentation.

🔧

Industrial process monitoring

The ADS7816PC suits industrial process monitoring because it combines a 12-bit conversion resolution with a 200kHz sampling rate and a differential input. A sensor front end can present the process signal relative to a biased midpoint, allowing the converter to measure the voltage difference while reducing sensitivity to common-mode noise. Its synchronous serial interface keeps the connection to a PLC, microcontroller, or data-acquisition controller compact. The reference range from 100mV to 5V also permits scaling for sensor outputs that use a small excitation or reference voltage. In a controller, automatic power-down can reduce consumption between measurement updates, provided the system allows adequate wake-up and acquisition time.

🔧

Laboratory instrumentation

The ADS7816PC is useful in laboratory instrumentation that measures slow or moderate-bandwidth analog signals with a digital controller. Its 12-bit resolution and selectable 100mV to 5V reference range allow the instrument designer to select the reference according to the full-scale input. The differential input can accept sensor or amplifier outputs referenced to a midpoint, while the synchronous serial interface simplifies connection to a microcontroller or digital signal processor. The 8-pin mini-DIP package is convenient for through-hole prototype boards and educational instruments, while automatic power-down helps limit standby consumption in portable measurement equipment.

🔧

Battery-powered sensor acquisition

The ADS7816PC fits battery-powered sensor acquisition systems that periodically measure an analog condition and then sleep. Its automatic power-down function is specified with a maximum 3uA power-down current, allowing the controller to activate the converter only when a reading is required. A differential input can reduce the effect of supply and ground noise when the sensor output is biased around a common-mode voltage. The 100mV to 5V reference range supports both low-level sensor signals and conventional logic-level ranges. Timing validation is important: the host controller should allow the converter and interface to meet the acquisition requirements before sampling the result.

🔧

Remote data acquisition

The ADS7816PC is appropriate for remote or distributed data-acquisition nodes where measured analog values must be converted close to the sensor. Its 200kHz sampling rate provides margin for moderate-speed signal acquisition, while the synchronous serial interface allows the converter to feed a microcontroller or communications controller. The differential input helps maintain measurement integrity when the source is referenced to a biased midpoint rather than ground. The small 8-pin mini-DIP package also helps keep the acquisition board compact. In remote systems, the reference, input protection, bypass capacitors, and interface isolation or protection must be designed together to preserve the accuracy of the measured signal.

🔧

Embedded control and monitoring

The ADS7816PC can serve as the analog front end of an embedded controller monitoring analog setpoints, sensor outputs, or diagnostic voltages. The 12-bit result can be transferred through the synchronous serial interface to a microcontroller without requiring a parallel bus, reducing board routing requirements. A differential connection is advantageous when the monitored voltage is biased around a midpoint, because the converter measures the difference between input nodes. The 200kHz sampling capability is more than adequate for many control and monitoring loops that do not require waveform capture. Designers should still verify the reference-voltage range, input limits, acquisition timing, and duty-cycled power behavior against the controller timing.

🔧

Educational and legacy instrumentation

The ADS7816PC is a practical choice for educational instruments, prototype boards, and legacy measurement equipment because it uses an 8-pin through-hole mini-DIP package and a straightforward synchronous serial interface. Students can connect the converter to a microcontroller development board, observe the digital conversion result, and study the effects of reference voltage and differential input polarity. For repair or upgrade work, the through-hole package simplifies hand soldering compared with a fine-pitch surface-mount option. The 12-bit resolution and 200kHz sampling rate are suitable for many teaching and low-bandwidth instrumentation tasks. Pin assignments and recommended decoupling should be taken directly from the manufacturer datasheet.

What is the resolution of the ADS7816PC?
The ADS7816PC has 12-bit resolution, providing 4096 digital conversion codes. Its resolution depends on the reference voltage: the manufacturer states 24uV at a 100mV reference and 1.22mV at a 5V reference. The part is a Texas Instruments successive-approximation ADC.
What is the sampling rate of the ADS7816PC?
The ADS7816PC samples at 200kHz. This rate supports relatively fast acquisition while the device remains a micropower converter for industrial, instrumentation, remote-sensing, and isolated measurement systems.
Is the ADS7816PC a differential-input ADC?
Yes. The ADS7816PC accepts one differential analog input, meaning the converter measures the voltage difference between the two input nodes. Differential operation can help reject common-mode noise when the source is biased around a reference midpoint.
What reference-voltage range does the ADS7816PC support?
The ADS7816PC supports a reference voltage from 100mV to 5V. According to the Texas Instruments ADS7816 datasheet, the corresponding resolution is 24uV at 100mV and 1.22mV at 5V. The reference selection should match the input range of the measured signal.
What is the power-down current of the ADS7816PC?
The ADS7816PC has a maximum power-down current of 3uA. Automatic power-down is useful in duty-cycled acquisition systems where the converter is enabled briefly for a measurement and then placed into a low-current state.
What interface does the ADS7816PC use?
The ADS7816PC uses a synchronous serial interface. This interface transfers conversion data over a compact serial connection and is suitable for connection to a microcontroller, digital signal processor, or other acquisition controller.
What package is used by the ADS7816PC?
The ADS7816PC is packaged in an 8-pin plastic mini-DIP, or PDIP, package. The package is a through-hole option suited to prototypes, educational equipment, industrial assemblies, and legacy or repair designs.
Where can I download the ADS7816PC datasheet?
The ADS7816PC datasheet is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7816.pdf. It describes the converter architecture, reference range, serial interface, power-down behavior, pin assignments, and recommended application information.
Where can I find the ADS7816PC pinout?
The ADS7816PC pin assignments are shown in the Texas Instruments ADS7816 datasheet. Use the manufacturer pin-description table when assigning the eight-package leads and when planning bypass-capacitor and signal-routing placement.
Is the ADS7816PC suitable for battery-powered measurement systems?
The ADS7816PC is suitable for battery-powered measurement systems because it combines a 200kHz sampling rate with automatic power-down and a maximum power-down current of 3uA. The complete power budget still depends on the reference, interface, controller, and external circuitry.
What is the ADS7816PC used for in industrial equipment?
Industrial equipment uses the ADS7816PC to acquire low-bandwidth analog measurements such as sensor voltages, process signals, and status levels. Its differential input, selectable reference range, and synchronous serial interface help support compact multi-channel measurement designs.
Can the ADS7816PC be used in isolated or remote data-acquisition systems?
The ADS7816PC can be used in isolated or remote acquisition systems when the measurement design provides an appropriate input signal, reference, and isolation interface. The converter’s low-power operation and small serial interface help reduce the component count in compact acquisition electronics.
Is there a drop-in replacement for the ADS7816PC?
The ADS7816PC requires an 8-pin mini-DIP replacement with the same ADC function, reference range, and interface timing. The manufacturer’s related ADS7816 package variants are not automatically drop-in equivalents, so package and pin compatibility must be confirmed before substitution.
What should I check before replacing the ADS7816PC?
Before replacing the ADS7816PC, verify the package, pinout, supply voltage, reference range, differential input limits, serial timing, and conversion latency. Also confirm that the replacement meets the required RoHS, REACH, and automotive qualifications for the target equipment.
How do I choose between the ADS7816PC and a similar 12-bit ADC?
Choose the ADS7816PC when the design needs a 12-bit SAR ADC with a 200kHz sampling rate, differential input, synchronous serial interface, and 8-pin mini-DIP package. Choose another converter when its package, reference range, interface, power profile, or qualification better matches the system.
Where can I request a quote for the ADS7816PC?
Use the XA price and availability request for the ADS7816PC to request current commercial terms. The request can confirm the required package, quantity, delivery schedule, and any additional sourcing information.

エンジニアリング参考データ: ADS7816PC — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADS7816PC when the design requires a 12-bit SAR ADC, a 200kHz sampling rate, a differential analog input, a synchronous serial interface, and an 8-pin mini-DIP package. It is particularly suitable for low-bandwidth industrial monitoring, sensor acquisition, laboratory instruments, and battery-powered systems that can use automatic power-down. The reference range from 100mV to 5V gives flexibility for scaled sensor signals. When selecting a substitute, verify the package and pinout first, then confirm reference range, supply requirements, input limits, conversion timing, serial protocol, and qualification status. A converter with similar resolution but a different package or interface may require PCB and firmware changes.

代替品との比較

パラメータ この製品
Package 8-pin plastic mini-DIP
Resolution 12 bit
Sampling Rate 200kHz
Input Type Differential, 1 input
Reference Voltage Range 100mV to 5V
Resolution at 100mV Reference 24uV
Resolution at 5V Reference 1.22mV
Power-Down Current 3uA maximum
Interface Synchronous serial interface

設計ノート

Keep the analog input traces short and route them away from switching nodes and high-current digital return paths. Place the input bypass capacitor close to the converter input pin and connect the capacitor ground return directly to the analog ground reference. Differential routing should keep the two input nets geometrically similar so that switching or radiating noise affects both inputs similarly.

Treat the reference voltage as part of the measurement signal chain, not as an unregulated logic supply. Provide a low-noise reference with the required voltage range and bypass it close to the reference pin. Verify the reference tolerance, startup behavior, and temperature drift against the required accuracy. The reference range is 100mV to 5V, so the reference value must remain within that range during normal operation.

The ADS7816PC uses a synchronous serial interface, so the controller must observe the converter’s timing for command, conversion, and data transfer. When automatic power-down is enabled, include wake-up and acquisition delays in the measurement cycle. Do not shorten the settling time around reference or input changes without checking the device timing and measurement accuracy in the datasheet.

関連検索

ADS7816PC datasheet ADS7816PC pinout ADS7816PC package ADS7816PC equivalent ADS7816PC replacement ADS7816PC price ADS7816PC stock ADS7816PC application circuit Texas Instruments ADS7816PC 12-bit 200kHz SAR ADC

関連部品&用語

Texas Instruments ADS7816PC ADS7816 12-bit ADC successive approximation register SAR ADC differential input 200kHz sampling rate synchronous serial interface automatic power-down 100mV to 5V reference 24uV resolution 1.22mV resolution 8-pin plastic mini-DIP analog-to-digital converter microcontroller digital signal processor industrial process monitoring sensor acquisition remote data acquisition laboratory instrumentation battery-powered measurement semiconductor surface-mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示