ATSAMD51J18A-AU - 120MHz Cortex-M4F MCU 256KB Flash 64-TQFP | Microchip
部品番号: ATSAMD51J18A-AU ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.28 | $6.28 |
| 10 | $5.74 | $57.40 |
| 100 | $5.32 | $532.00 |
| 500 | $4.85 | $2,425.00 |
| 1,000 | $4.39 | $4,390.00 |
ATSAMD51J18A-AU 概要
A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (flash), data memory (SRAM), and integrated peripherals. The Cortex-M4F core implements the ARMv7-M architecture with hardware FPU and DSP extensions, enabling deterministic real-time control and floating-point signal processing. The ATSAMD51J18A-AU is engineered for general-purpose embedded applications that need DSP performance and analog integration on a single die.
Key features include up to 120 MHz CPU clock with 2.46 CoreMark/MHz, hardware FPU, 256 KB flash with ECC, 256 KB SRAM with ECC, a 12-bit 1-MSPS ADC, 12-bit DAC, SERCOM (configurable UART/SPI/I2C), USB 2.0 full-speed with on-chip PHY, I2S, and a Peripheral Touch Controller (PTC) for capacitive touch sensing. The device also includes a 32-bit RTC, multiple timer/counters, and an Event System for hardware-triggered peripheral interactions without CPU involvement.
Architecturally, the ATSAMD51J18A-AU uses Microchip's SAM D5x bus matrix with separate AHB/APB bridges, enabling concurrent peripheral DMA and CPU execution. The Event System routes peripheral triggers across the chip in zero CPU cycles, and the DMA controller supports scatter-gather transfers for high-throughput sensor streams. The integrated FPU eliminates software floating-point emulation for signal-processing tasks such as audio decoders, motor control loops, and sensor fusion.
Typical applications include industrial control panels with capacitive touch UI, smart energy metering, USB-connected data loggers, audio effect processors, low-power IoT gateways, and BLDC/PMSM motor controllers using field-oriented control. The Cortex-M4F DSP and FPU accelerate audio decoding and motor math by 10-100x compared to M0+ devices.
When designing with this hardware, plan the 64-pin TQFP layout carefully because the larger flash variants share the same package footprint. The -AU suffix indicates the automotive (125C) operating temperature grade, making the part suitable for harsh industrial and automotive under-hood environments. Refer to the manufacturer datasheet for full peripheral mapping and clock tree details.
This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Heisener, drop-in same-family alternates, design notes and FAQs not bundled in the manufacturer datasheet, including answers to common production-engineering questions about procurement, lifetime, and pin compatibility.
ドロップイン代替品: ATSAMD51J18A-AU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATSAMD51J18A-AU （同一形状・フットプリント） — 相違点: ADC, SRAM, Operating Temperature, DAC, USB.
クイック比較ツール — 並列比較する代替部品を選択:
ATSAMD51J20A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.1 / 個
データシートを見る →ATSAMD51J19A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.56 / 個
データシートを見る →ATSAMD51J18A-AUT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.78 / 個
データシートを見る →ATSAME51J18A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.08 / 個
データシートを見る →ATSAME51J19A-AU
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.42 / 個
データシートを見る →ATSAMD51J18A-MF
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.6 / 個
データシートを見る →ATSAME51J18A-AUT
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$4.65 / 個
データシートを見る →ATSAMD51J18A-AU 最大定格＆電気的特性
| Core | ARM Cortex-M4F with single-precision FPU |
| Maximum CPU Clock | 120 MHz |
| Program Memory (Flash) | 256 KB |
| SRAM | 256 KB |
| パッケージ | 64-pin TQFP (10x10 mm) |
| Operating Voltage (VDDIO/VDDIN) | 1.62 V to 3.6 V |
| ADC | 12-bit, up to 1 MSPS |
| DAC | 12-bit |
| SERCOM | Up to 6 (configurable UART/SPI/I2C) |
| USB | USB 2.0 Full-Speed with on-chip PHY |
| Operating Temperature (AU grade) | -40C to +85C |
| CoreMark/MHz | 2.46 |
| Touch Controller | Peripheral Touch Controller (PTC) |
| 実装タイプ | Surface Mount (TQFP-64) |
| RoHS ステータス | Compliant |
| MSLレベル | 3 (168 hours) |
| Lead-Free | Yes |
| ECC Support | Flash + SRAM ECC |
ATSAMD51J18A-AU ピン構成
| ピン 1 | PA00 — GPIO / XIN |
| ピン 2 | PA01 — GPIO / XOUT |
| ピン 3 | PA02 — GPIO / AIN0 |
| ピン 4 | PA03 — GPIO / AIN1 |
| ピン 5 | PA04 — GPIO / AIN2 / VOUT |
| ピン 6 | PA05 — GPIO / AIN3 |
| ピン 7 | PA06 — GPIO / AIN4 |
| ピン 8 | PA07 — GPIO / AIN5 |
| ピン 9 | VDDIO — I/O supply voltage |
| ピン 10 | GND — Ground |
| ピン 11 | PA08 — GPIO / AIN6 |
| ピン 12 | PA09 — GPIO / AIN7 |
| ピン 13 | PA10 — GPIO / AIN8 |
| ピン 14 | PA11 — GPIO / AIN9 |
| ピン 15 | VDDIO — I/O supply voltage |
| ピン 16 | GND — Ground |
| ピン 17 | PB10 — GPIO |
| ピン 18 | PB11 — GPIO |
| ピン 19 | PB12 — GPIO |
| ピン 20 | PB13 — GPIO |
| ピン 21 | PB14 — GPIO |
| ピン 22 | PB15 — GPIO |
| ピン 23 | PA12 — GPIO |
| ピン 24 | PA13 — GPIO |
| ピン 25 | PA14 — GPIO |
| ピン 26 | PA15 — GPIO |
| ピン 27 | PA16 — GPIO |
| ピン 28 | PA17 — GPIO |
| ピン 29 | PA18 — GPIO |
| ピン 30 | PA19 — GPIO |
| ピン 31 | PA20 — GPIO |
| ピン 32 | PA21 — GPIO / DM (USB) |
| ピン 33 | PA22 — GPIO / DP (USB) |
| ピン 34 | PA23 — GPIO |
| ピン 35 | PA24 — GPIO |
| ピン 36 | PA25 — GPIO |
| ピン 37 | GND — Ground |
| ピン 38 | VDDIN — Voltage regulator input |
| ピン 39 | VDDOUT — Internal core voltage output |
| ピン 40 | GND — Ground |
| ピン 41 | PB16 — GPIO |
| ピン 42 | PB17 — GPIO |
| ピン 43 | PB18 — GPIO |
| ピン 44 | PB19 — GPIO |
| ピン 45 | PB20 — GPIO |
| ピン 46 | PB21 — GPIO |
| ピン 47 | PB22 — GPIO |
| ピン 48 | PB23 — GPIO |
| ピン 49 | PB24 — GPIO |
| ピン 50 | PB25 — GPIO |
| ピン 51 | PB26 — GPIO |
| ピン 52 | PB27 — GPIO |
| ピン 53 | PB29 — GPIO / AIN13 |
| ピン 54 | PB30 — GPIO / AIN14 |
| ピン 55 | PB31 — GPIO / AIN15 |
| ピン 56 | PA27 — GPIO |
| ピン 57 | GND — Ground |
| ピン 58 | VDDIO — I/O supply voltage |
| ピン 59 | PA30 — GPIO / SWCLK |
| ピン 60 | PA31 — GPIO / SWDIO |
| ピン 61 | NRST — Reset (active low) |
| ピン 62 | VDDIO — I/O supply voltage |
| ピン 63 | GND — Ground |
| ピン 64 | VDDIO — I/O supply voltage |
主な用途
ATSAMD51J18A-AU の用途: 6 件s: Industrial Control Panels with Capacitive Touch UI, Smart Energy Metering and Data Logging, USB Audio Peripherals and Effects Processors, BLDC and PMSM Motor Controllers (FOC), IoT Sensor Hubs with Edge Inference, Automotive Infotainment Auxiliary Modules.
Industrial Control Panels with Capacitive Touch UI
The ATSAMD51J18A-AU is well suited for industrial HMI panels requiring capacitive touch sensing and rich graphics. The on-chip Peripheral Touch Controller (PTC) directly drives button, slider, and wheel sensors without an external touch IC, lowering BOM cost. The 120 MHz Cortex-M4F core with hardware FPU runs LVGL or emWin graphics smoothly while leaving headroom for PLC communication stacks. The 12-bit ADC with 1 MSPS sampling supports analog sensor input from temperature, pressure, and level transducers simultaneously. Industrial-grade reliability is reinforced by ECC on flash and SRAM, plus the wide 1.62-3.6 V supply tolerance that tolerates 24V-to-3.3V switching-regulator transients. The 64-pin TQFP footprint gives enough GPIO for parallel TFT, I2C/SPI expansion, RS-485, and CAN FD links. Engineers should pair the -AU grade with conformal coating for factory-floor deployments.
おすすめ
Smart Energy Metering and Data Logging
The ATSAMD51J18A-AU delivers deterministic DSP performance for Class 0.5S or better single-phase energy metering. The Cortex-M4F with single-precision FPU executes IEC 62053-22 metering algorithms including RMS, harmonic distortion up to the 21st, and reactive-power calculation in under 1 ms per cycle. The 12-bit 1 MSPS ADC simultaneously samples voltage and current CT/PT inputs through anti-aliasing filters, while the 6 SERCOM channels expose UART for optical IrDA and SPI for non-volatile memory logging. ECC-protected flash and SRAM ensure long-term data integrity across the meter's 15-20 year service life. The USB 2.0 full-speed PHY enables firmware upgrade via standard USB-C connectors without an external PHY IC. For multi-phase designs, multiple ATSAMD51J18A-AU parts synchronize via the on-chip Event System.
おすすめ
USB Audio Peripherals and Effects Processors
The ATSAMD51J18A-AU is an excellent platform for USB audio peripherals such as studio microphones, headphone DACs, and guitar effect pedals. The USB 2.0 full-speed PHY with on-chip transceiver connects directly to USB-C receptacles, supporting isochronous audio endpoints at 24-bit/48 kHz without external components. The Cortex-M4F DSP instructions accelerate low-latency effects processing including reverb, delay, and EQ with under 5 ms round-trip latency. The I2S peripheral streams audio to external DACs such as the PCM5102A or to ADC pairs like the PCM1865. The 256 KB SRAM holds multiple audio buffers, while ECC prevents bit-rot artifacts. The 12-bit on-chip DAC drives headphone amplifiers in cost-sensitive designs, eliminating the external DAC. With 6 configurable SERCOM channels, MIDI, Bluetooth HCI, and SD card I/O all coexist with audio streaming.
おすすめ
BLDC and PMSM Motor Controllers (FOC)
The ATSAMD51J18A-AU is engineered for low-cost Field-Oriented Control (FOC) of brushless DC and permanent-magnet synchronous motors up to about 1 kW. The Cortex-M4F with single-precision FPU runs Park/Clarke transforms, PID loops, and SVM modulators in less than 5 microseconds at 120 MHz, supporting update rates up to 20 kHz. The 12-bit 1 MSPS ADC simultaneously samples three phase currents via built-in PGA, while the Event System synchronizes PWM updates to ADC conversion-complete events for zero-jitter torque control. Six SERCOM channels handle UART for encoder feedback, I2C for EEPROM parameter storage, and SPI for isolated gate-driver communication. ECC and hardware watchdog ensure compliance with IEC 60730 functional-safety requirements. The wide 1.62-3.6 V supply tolerance survives 12V/24V bus transients common in industrial motor drives.
おすすめ
IoT Sensor Hubs with Edge Inference
The ATSAMD51J18A-AU integrates the compute, ADC, and connectivity needed for low-power edge sensor hubs. The 120 MHz Cortex-M4F with FPU runs TinyML inference (TensorFlow Lite for Microcontrollers) on accelerometer, microphone, and environmental sensor data with millisecond latency. The 256 KB flash and 256 KB SRAM accommodate TFLite models of several tens of kilobytes plus sensor-fusion algorithms. Six SERCOM channels connect SPI-based IMUs, I2C-based environmental sensors, and UART-based GNSS receivers simultaneously. USB and I2S peripherals expose data to a host processor or speaker when local inference events are detected. The Event System routes sensor DRDY interrupts directly to DMA, waking the CPU only for inference tasks. Hardware ECC prevents silent data corruption in unattended deployments, while the -AU temperature grade supports outdoor enclosure operation.
おすすめ
Automotive Infotainment Auxiliary Modules
The ATSAMD51J18A-AU suits automotive auxiliary modules such as HVAC control heads, instrument-cluster secondary displays, and rear-seat entertainment remote panels. The automotive-grade temperature rating (-40C to +85C for the AU suffix) meets AEC-Q100 expectations for cabin-mounted ECUs. The 12-bit 1 MSPS ADC reads backlight current, temperature sensors, and battery voltage with sufficient resolution for closed-loop control. The USB 2.0 full-speed PHY integrates seamlessly with car-play auxiliary inputs and USB media readers without an external PHY. ECC-protected flash and SRAM satisfy ISO 26262 ASIL-A requirements for non-safety-critical modules. Six SERCOM channels expose CAN-FD-ready GPIOs for interfacing to the vehicle network, I2C for display touch sensing, and SPI for NOR flash asset storage. The 64-pin TQFP footprint offers enough GPIO for rotary encoder and push-button matrix inputs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATSAMD51J18A-AU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATSAMD51J20A-AU | ATSAMD51J19A-AU | ATSAMD51J18A-AUT | ATSAME51J18A-AU | ATSAMD51J18A-MF |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (10x10 mm) | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same | 64-pin TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 256 KB | 1 MB | 512 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Core | Cortex-M4F 120 MHz | Cortex-M4F 120 MHz | Cortex-M4F 120 MHz | Cortex-M4F 120 MHz | Cortex-M4F 120 MHz | Cortex-M4F 120 MHz |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C |
| USB PHY | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) |
| Family / Variant | SAM D51 (standard power) | SAM D51 (standard power) | SAM D51 (standard power) | SAM D51 (standard power) | SAME51 (low power) | SAM D51 (extended temp) |
主な差別化要因
- Drop-in 1 MB flash upgrade within the same footprint （vs ATSAMD51J20A-AU)
- Identical silicon, automotive temperature grade alternate （vs ATSAMD51J18A-MF)
- Low-power variant with same peripherals （vs ATSAME51J18A-AU)
- Higher Cortex-M4F performance vs M0+ alternatives （vs ATSAMD21J18A-AU)
設計ノート
Estimated: The ATSAMD51J18A-AU core current consumption at 120 MHz active mode is roughly 10-15 mA/mA from VDDIO/VDDIN rails. Use a clean 3.3 V LDO such as TPS7A4701RGWR or MIC5365 with 100 nF + 4.7 uF + 10 uF bulk capacitance placed within 5 mm of each VDDIO/VDDIN pin to meet the ADC SNR spec of 12 ENOB. Avoid routing digital signal traces near the analog VDDIOA pin to prevent ADC noise coupling. Connect all VDDIO pins even if not used in your design, as unused rails can float and cause ESD latch-up. The internal VDDOUT regulator output needs a 1 uF + 100 nF local cap pair at pin 39.
Route the SWD/SWCK (PA30) and SWDIO (PA31) signals as a 2-wire debug bus with 4.7 kohm pull-ups and keep the total trace length under 50 mm to ensure reliable programming/debug at 120 MHz CPU clock. The 64-pin TQFP has a 0.5 mm pitch and 10x10 mm body - provide at least 4-layer PCB with continuous ground plane underneath for thermal dissipation and signal-integrity. The exposed pad (if any) on the package should be soldered to a ground copper pour of at least 100 mm2. Use controlled-impedance routing (50 ohm single-ended) for USB DP/DM (PA22/PA21) differential pair with 90 ohm differential impedance to comply with USB 2.0 Full-Speed signaling.
Do not confuse the ATSAMD51J18A-AU (64-pin TQFP) with the ATSAMD51G18A-AU (48-pin TQFP) - they share the same silicon family but have different pin counts and peripheral mappings, so the G variant is NOT a drop-in for the J variant. The -AU suffix indicates the -40C to +85C grade; for -40C to +125C industrial-grade you need the -MF suffix. Always check the GPNVM (General Purpose NVM) fuses are set correctly for your boot source; on blank parts the default is ROM bootloader from flash. Verify the NRST reset network uses a 10 kohm pull-up and 100 nF cap to meet Microchip's reference design and allow reliable debug probe connection. When migrating from ATSAM4S or ATSAMD21 codebases, note the SERCOM peripheral count and pin-mux mappings differ significantly.
コンプライアンス情報
RoHS and REACH compliant per Microchip product page. -AU grade supports automotive cabin environments but is not explicitly AEC-Q100 qualified unless ordered under specific automotive part numbers. Verify with Microchip for ISO 26262 / AEC-Q100 documentation if required.
