DSPIC33EP256MC202-I/SP - 16-bit 70 MIPS DSC, 256KB Flash | Microchip
部品番号: DSPIC33EP256MC202-I/SP ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.31 | $6.31 |
| 10 | $5.68 | $56.80 |
| 100 | $5.05 | $505.00 |
| 500 | $4.54 | $2,270.00 |
| 1,000 | $4.12 | $4,120.00 |
DSPIC33EP256MC202-I/SP 概要
A digital signal controller combines the computational architecture of a microcontroller with the numeric acceleration of a DSP. In the product hierarchy, the dsPIC33EP sits between general-purpose 16-bit MCUs (such as PIC24) and dedicated DSPs, making it a power management IC-level solution for real-time embedded control where closed-loop algorithms must execute deterministically.
Key features include a 70 MIPS dsPIC core with DSP instruction support, motor control PWM (MCPWM) outputs, a quadrature encoder interface (QEI) for position feedback, two integrated operational amplifiers, three analog comparators, and a peripheral trigger generator (PTG). These on-chip analog and timing blocks reduce external component count in motor drive designs.
The dsPIC33E core uses an enhanced 16-bit architecture with 24-bit instruction words, hardware multiply-accumulate (MAC) support, and flexible peripheral pin select (PPS) for routing digital functions. This enables deterministic execution of field-oriented control (FOC) and sensorless algorithms without an external DSP.
Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, power conversion and digital power supplies, and industrial automation nodes. The MCPWM and QEI peripherals make it especially efficient for servo and traction systems.
Design consideration: the -I suffix specifies an industrial temperature range of -40C to +85C; for automotive profiles evaluate the -E variant. Decouple VDD with 0.1 uF ceramics close to each VDD pin.
This page synthesizes distributor pricing, drop-in alternatives, pin-compatible family variants, and practical design notes not found in the manufacturer datasheet alone. Specifications reflect data verified as of 2026-09-24.
ドロップイン代替品: DSPIC33EP256MC202-I/SP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP256MC202-I/SP （同一形状・フットプリント） — 相違点: Package, Core Architecture, Product Family, Operating Temperature, Programming Interface.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP256MC202-H/SP
✅ ドロップイン✓ 在庫あり
$3.9 / 個
データシートを見る →DSPIC33EP256MC202-E/SP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128MC202-I/SP
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.94 / 個
データシートを見る →DSPIC33EP64MC202-I/SP
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$3.1 / 個
データシートを見る →PIC24EP256GP202-I/SP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP256MC202-I/SP 最大定格＆電気的特性
| Core | 16-bit dsPIC DSC core |
| Maximum Performance | 70 MIPS |
| CPU Frequency (listed) | 60 MHz |
| Program Memory | 256 KB (85.5K x 24) Flash |
| SRAM | 32 KB |
| パッケージ | 28-SPDIP |
| ピン数 | 28 |
| 実装タイプ | Through Hole |
| Peripherals | MCPWM, QEI, 2 OpAmps, 3 Comparators, PTG |
| 動作温度 | -40C to +85C (I grade) |
| In-Circuit Programming | ICSP (two PGECx/PGEDx pairs available) |
| Product Family | dsPIC33EP (Motor Control family) |
| Debug Tool Support | MPLAB SNAP / ICD / ICSP |
DSPIC33EP256MC202-I/SP 28-spdip ピン配置ガイド
DSPIC33EP256MC202-I/SP (28-spdip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP256MC202-I/SP.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP256MC202-I/SP の用途: 6 件s: Brushless DC Motor Control, Digital Power Supplies, PMSM Field-Oriented Control Servo Drives, Industrial Automation Nodes, Embedded Prototyping and Education, Sensor Signal Conditioning and Acquisition.
Brushless DC Motor Control
The DSPIC33EP256MC202-I/SP fits BLDC motor drives because its motor control PWM (MCPWM) peripheral generates complementary or independent PWM channels with dead-time control, while the quadrature encoder interface reads position feedback at hardware speed. The on-chip op-amps condition shunt-resistor current signals and the three comparators support cycle-by-cycle overcurrent protection without external amplifier ICs. In a typical sensorless or sensored BLDC topology, the 70 MIPS core executes the commutation or FOC loop in the main ISR, leaving margin for communication. The 28-pin SPDIP package suits drive boards up to a few hundred watts where through-hole reliability is preferred.
おすすめ
Digital Power Supplies
For digitally controlled AC-DC and DC-DC converters, the DSPIC33EP256MC202-I/SP provides high-resolution PWM outputs, fast analog comparators for peak current-mode protection, and a 70 MIPS core able to run compensation loops at tens of kHz update rates. The integrated op-amps buffer voltage and current sense signals, cutting BOM cost versus a discrete MCU plus analog front end. Placed as the sole supervisory controller, it handles soft-start, fault management, and communication (UART/I2C/SPI via peripheral pin select) simultaneously, and its industrial -40C to +85C grade suits telecom and industrial power bricks.
おすすめ
PMSM Field-Oriented Control Servo Drives
Permanent magnet synchronous motor servo drives benefit directly from this DSC: the QEI decodes incremental encoder A/B/Z signals without CPU intervention, the MCPWM module produces the three-phase SVPWM waveform with hardware dead time, and the dual op-amps plus comparators implement the current-sensing chain and fast overcurrent trip. At 70 MIPS the core sustains FOC current loops at 10-20 kHz and velocity loops at 1 kHz with C or assembly code, per Microchip's motor-control application frameworks. The 28-pin footprint keeps the control PCB compact for embedment inside servo housings or integrated motor modules.
おすすめ
Industrial Automation Nodes
In factory automation, the DSPIC33EP256MC202-I/SP serves as an intelligent node handling sensor acquisition, local control, and serial communication. The PTG (peripheral trigger generator) automates ADC sampling sequences with minimal CPU load, while peripheral pin select routes UART, SPI, or I2C to any RPx pin, easing PCB layout constraints. The 256 KB Flash accommodates protocol stacks and firmware-update images simultaneously, and the industrial -40C to +85C operating range matches cabinet-mounted controllers. Through-hole SPDIP also simplifies rework and socket-based replacement in legacy equipment retrofits and low-volume industrial machinery.
おすすめ
Embedded Prototyping and Education
The 28-pin SPDIP through-hole package makes this part exceptionally convenient for breadboarding, university labs, and one-off prototypes: it fits standard 0.3-inch DIP sockets, survives repeated insertion, and can be hand-soldered without hot air. ICSP programming requires only five connections (MCLR, VDD, VSS, PGECx, PGEDx) and works with low-cost MPLAB SNAP or NSDSP tools. Full support in the free MPLAB X IDE and XC16 compiler lowers the entry barrier. Students and engineers can exploit the same DSP and motor-control peripherals used in commercial drives, so prototype firmware ports directly to surface-mount production variants like the /SS or /MM packages.
おすすめ
Sensor Signal Conditioning and Acquisition
With two on-chip operational amplifiers and three comparators, the DSPIC33EP256MC202-I/SP can amplify and threshold sensor signals internally, removing external op-amp ICs from the signal chain. Typical uses include bridge-sensor (pressure, load cell) conditioning where the op-amps provide gain and the ADC digitizes results, triggered by the PTG for deterministic sample timing. The 70 MIPS DSP engine applies digital filtering (FIR/IIR with MAC instructions) on-chip, and 256 KB Flash stores look-up tables and calibration data. The industrial temperature grade and through-hole package suit rugged sensor boards in field instrumentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP256MC202-I/SP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP256MC202-H/SP | DSPIC33EP256MC202-E/SP | DSPIC33EP128MC202-I/SP | DSPIC33EP64MC202-I/SP | PIC24EP256GP202-I/SP |
|---|---|---|---|---|---|---|
| Package | 28-SPDIP | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory (Flash) | 256 KB (85.5K x 24) | 256 KB | 256 KB | 128 KB | 64 KB | 256 KB |
| Maximum Performance | 70 MIPS | 70 MIPS (per H grade spec) | 60 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Motor Control Peripherals (MCPWM/OpAmps/Comparators) | Yes / 2 / 3 | Yes / 2 / 3 | Yes / 2 / 3 | Yes / 2 / 3 | Yes / 2 / 3 | No (GP variant, no MC analog) |
| Temperature Grade | -40C to +85C (I) | H grade (per Microchip grading) | Extended (E grade) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) |
| Drop-in on 28-SPDIP Footprint | Reference | Yes - pin-to-pin | Yes - pin-to-pin | Yes - pin-to-pin | Yes - pin-to-pin | Yes - pin-to-pin |
主な差別化要因
- Dedicated motor-control analog integration （vs PIC24EP256GP202-I/SP)
- Largest Flash in the 28-pin MC202 line （vs DSPIC33EP128MC202-I/SP)
- Through-hole SPDIP package （vs DSPIC33EP256MC202-I/MM)
設計ノート
The dsPIC33EP core requires an external low-ESR capacitor on the VCAP/VDDCORE pin to stabilize the internal 1.8 V core regulator; per Microchip datasheet guidance this must be a low-ESR ceramic of the value specified in DS70000657J. Decouple each VDD pin with 0.1 uF ceramic placed within a few millimeters. Estimated: budget total supply current using datasheet Idd at 70 MIPS plus per-peripheral loading (PWM, ADC, op-amps) for the regulator sizing - do not assume only core current.
For ICSP programming, connect MCLR with a pull-up resistor and series resistor per the programmer specification, and route one PGECx/PGEDx pair to a programming header. The device has multiple PGEC/PGED pairs - any pair works, but ICSPCLK and ICSPDAT must come from the same pair (for example PGEC2 with PGED2), as documented by Northern Software's compatibility notes. All VDD and VSS pins must be connected during debugging and programming or the device will not enter debug mode.
The -I (industrial) and -E (extended) suffix grades differ in maximum clock speed: the -E variant is specified at 60 MIPS versus 70 MIPS, so firmware written at 70 MIPS timing must be re-validated if a cross-grade substitution occurs. Also, this DSC is rated for industrial temperature only - it is not AEC-Q100 automotive qualified; for vehicle applications use the dedicated automotive-grade Microchip variants. When using peripheral pin select, verify that the chosen RPx pins do not conflict with analog functions needed by the op-amps and comparators.
コンプライアンス情報
Compliance status not stated in the provided verified web data; confirm on the official Microchip product page or Microchip Direct before procurement. This device is a general industrial/commercial part and is not marketed as AEC-Q100 automotive qualified.
