DSPIC33EP512MU814-I/PL - 16-bit DSC, 512KB Flash | Microchip
部品番号: DSPIC33EP512MU814-I/PL ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.2 | $9.20 |
| 10 | $8.55 | $85.50 |
| 100 | $7.8 | $780.00 |
| 500 | $7.1 | $3,550.00 |
| 1,000 | $6.45 | $6,450.00 |
DSPIC33EP512MU814-I/PL 概要
A digital signal controller combines the computational architecture of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits at the top of the 16-bit MCU class: it executes single-cycle MAC and DSP instructions, making it a natural upgrade path from a general-purpose microcontroller when control loops become computationally demanding, such as in digital power conversion, sensor fusion, or motor field-oriented control.
Key features include the high-speed PWM module with complementary outputs and dead-time insertion for motor drives and digital power supplies, an integrated full-speed USB 2.0 device peripheral, dual CAN 2.0B (ECAN) modules, up to four UARTs, up to three SPI and three I2C peripherals, and a Data Converter Interface (DCI) for audio codecs. The industrial temperature grade (-I) covers -40C to +85C operation at 3.3V.
Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with 16-bit data and 24-bit instructions, hardware DSP multiply-accumulate units, and a 16-channel DMA controller that offloads data movement from the CPU, keeping interrupt latency deterministic in fast control loops.
Typical applications include brushless DC and PMSM motor control, digital SMPS and LLC converters, USB-connected industrial instruments, audio and speech processing using the DCI, and CAN-networked automation nodes.
Design consideration: this device is known to be sensitive to crosstalk between PGEC and PGED programming lines; a small 20 pF capacitor from PGEC to VSS placed close to the chip improves in-circuit debugging reliability.
This page synthesizes distributor pricing data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: DSPIC33EP512MU814-I/PL — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: DSPIC33EP512MU814-I/PL （同一形状・フットプリント） — 相違点: Package, USB, Operating Temperature, Supply Voltage, Communication Interfaces.
クイック比較ツール — 並列比較する代替部品を選択:
DSPIC33EP512MU814-E/PL
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$12.48 / 個
データシートを見る →DSPIC33EP256MU814
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP128MU814
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP64MU814
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
DSPIC33EP512MU814-I/PL 最大定格＆電気的特性
| Core Architecture | 16-bit dsPIC DSC core |
| CPU Speed | 60 MHz |
| Core Performance | 70 MIPS (dsPIC33E family) |
| Program Flash Memory | 536 KB |
| RAM | 52 KB |
| 電源電圧 | 3.3 V |
| 動作温度 | -40C to +85C (I grade) |
| パッケージ | 144-LQFP (20x20 mm), 0.5 mm pitch |
| 実装タイプ | Surface Mount |
| I/O Count | 122 |
| USB | Full-Speed USB 2.0 device |
| CAN | 2x ECAN 2.0B |
| Communication Interfaces | UART, SPI, I2C, DCI |
| PWM | High-speed PWM with dead-time control |
| RoHS ステータス | Compliant |
| Packaging | Tray |
| Technology | CMOS |
DSPIC33EP512MU814-I/PL 144-lqfp (20x20 mm), 0.5 mm pitch ピン配置ガイド
DSPIC33EP512MU814-I/PL (144-lqfp (20x20 mm), 0.5 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: DSPIC33EP512MU814-I/PL.
詳細は データシート をご参照ください。
主な用途
DSPIC33EP512MU814-I/PL の用途: 6 件s: Precision Motor Control (BLDC/PMSM), Digital Switch-Mode Power Supplies, USB-Connected Industrial Instruments, Audio and Speech Processing, CAN-Networked Automation Nodes, Automotive-Adjacent Test and Development Systems.
Precision Motor Control (BLDC/PMSM)
The DSPIC33EP512MU814-I/PL fits motor control because its 70 MIPS DSP core executes field-oriented control (FOC) loops with single-cycle multiply-accumulate instructions, while the high-speed PWM module generates complementary outputs with programmable dead-time - exactly what three-phase inverters require. In a typical PMSM drive, the ADC samples phase currents synchronously with the PWM center, and the 16-channel DMA moves conversion results without CPU intervention, keeping the current loop deterministic. Microchip validates this exact use case with the MA330025-3 Motor Control PIM on the dsPICDEM MCLV and MCHV boards. The trade-off is LDO-free 3.3V operation requiring gate-driver buffers, but the integrated peripherals eliminate external PWM controllers, reducing BOM count significantly.
おすすめ
Digital Switch-Mode Power Supplies
Digital SMPS and LLC converter designs benefit from the DSPIC33EP512MU814-I/PL's combination of 60 MHz CPU speed, high-resolution PWM, and fast ADC triggering. The high-speed PWM module supports complementary and independent output modes with phase shifting, enabling multiphase buck converters and full-bridge LLC topologies from a single chip. The 536 KB flash provides ample room for soft-start routines, compensation algorithms (PID or 3p3z implemented in DSP instructions), fault logging, and PMBus-style communication over I2C or ECAN. Synchronous ADC-to-PWM update latency in the tens-of-nanoseconds class keeps control-loop bandwidth competitive with dedicated digital power controllers. Estimated benefit: consolidating PWM, control, telemetry, and CAN into one 3.3V device removes 2-3 ICs from typical designs.
おすすめ
USB-Connected Industrial Instruments
With its integrated full-speed USB 2.0 device peripheral, the DSPIC33EP512MU814-I/PL serves data-acquisition and test instruments that stream readings to a PC without an external USB interface chip. The 52 KB of RAM buffers sample blocks, while the DMA controller feeds ADC data directly into USB endpoint memory, freeing the 70 MIPS core for filtering and calibration. Dual ECAN modules simultaneously bridge fieldbus traffic to a host over USB, a common architecture in industrial gateways and logger front-ends. The 122 I/O lines handle relays, encoders, and keypad interfaces on the same board. Using the built-in USB PHY eliminates a dedicated transceiver IC, saving board area and an estimated $0.50-$1.00 of BOM cost per unit.
おすすめ
Audio and Speech Processing
The Data Converter Interface (DCI) connects directly to audio codecs in I2S-compatible formats, making the DSPIC33EP512MU814-I/PL a practical speech and audio processing node. Its DSP MAC instructions execute FIR and IIR filters, echo cancellation, and codec loop tasks efficiently at 70 MIPS. The 536 KB flash stores voice prompts and algorithm tables, while 52 KB RAM holds double-buffered audio frames. Typical products include intercoms, PA controllers, hearing-aid programming stations, and conferencing hardware. Noise performance of the audio path depends on clean 3.3V supplies - adding a low-noise LDO on the analog rail is recommended. The 144-LQFP package provides plentiful I/O for multiple codec slots, rotary encoders, and display interfaces on one controller.
おすすめ
CAN-Networked Automation Nodes
Automation and building-control nodes use the DSPIC33EP512MU814-I/PL's dual ECAN 2.0B modules to bridge two CAN segments or implement gateway redundancy. The 70 MIPS core runs protocol stacks, sensor acquisition, and local control simultaneously, while 122 I/O lines drive contactors, read limit switches, and manage HMI elements. The industrial -40C to +85C rating suits factory-floor and outdoor cabinet environments. DMA-supported peripheral operation keeps CAN RX handling jitter-free even under heavy interrupt load. A typical node reads encoders via QEI, controls actuators through PWM, and reports status over CAN at 1 Mbps - all from one 3.3V controller. The 144 pins allow a single chip to consolidate functions that would otherwise need several smaller MCUs.
おすすめ
Automotive-Adjacent Test and Development Systems
The DSPIC33EP512MU814-I/PL is well suited to engineering test fixtures, ECU flashing stations, and motor-bench development rigs thanks to its large memory headroom (536 KB flash stores test scripts and logs), dual ECAN for automotive CAN bus interaction, and USB for host connectivity. Microchip's dsPICDEM MCLV/MCHV/MCSM boards (DM330021/DM330023/DM330022) accept the MA330025-3 PIM carrying this exact device, giving teams a validated hardware platform for firmware bring-up before custom PCBs arrive. The rich peripheral set emulates sensor inputs and PWM loads, and the 144-LQFP 0.5 mm pitch allows two-layer prototype boards with through-hole test points. Programming-line care (20 pF PGEC-to-VSS capacitor) is important on these development fixtures.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: DSPIC33EP512MU814-I/PL — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | DSPIC33EP512MU814-E/PL | DSPIC33EP256MU814 | DSPIC33EP128MU814 | DSPIC33EP64MU814 |
|---|---|---|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same | 144-LQFP (20x20 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 536 KB | 536 KB | 256 KB | 128 KB | 64 KB |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| CPU Speed | 60 MHz (70 MIPS) | 60 MHz (70 MIPS) | 60 MHz (70 MIPS) | 60 MHz (70 MIPS) | 60 MHz (70 MIPS) |
| USB Peripheral | Full-speed USB 2.0 device | Full-speed USB 2.0 device | Full-speed USB 2.0 device | Full-speed USB 2.0 device | Full-speed USB 2.0 device |
| I/O Count | 122 | 122 | 122 | 122 | 122 |
| Relative Cost | Baseline (highest memory) | Premium (extended temp grade) | Lower (half the flash) | Lower still | Lowest in family |
主な差別化要因
- Maximum program memory in the Mu814 family （vs DSPIC33EP256MU814)
- Industrial temperature grade standard （vs DSPIC33EP512MU814-E/PL)
- Integrated USB plus DCI audio interface （vs DSPIC33EP128MU814)
設計ノート
PGEC/PGED crosstalk: the dsPIC33EP512MU814 is more sensitive to crosstalk on its programming lines than other PIC devices, which can cause inability to connect or verification failures during in-circuit programming. Documented mitigation: connect a small 20 pF capacitor from the PGEC line to VSS, placed as close to the chip as possible. Additionally, route PGEC/PGED traces short and away from high-dV/dt PWM and switching nodes, since motor-control designs place this DSC near noisy gate drivers.
Supply design: the device runs from a single 3.3V rail with fast internal clock switching; provide a solid 0.1 uF decoupling capacitor at each VDD/VSS pin pair plus bulk 10 uF near the package. VDDCORE operation requires the on-chip regulator's external capacitor per datasheet recommendation - do not omit it. In motor-drive systems where gate drivers and current shunts share the PCB, separate the analog 3.3V supply feed (ferrite bead or dedicated LDO) from the digital rail to keep ADC readings clean during PWM switching events.
The 144-LQFP 20x20 mm 0.5 mm-pitch footprint has 36 pins per side; allocate at least one internal ground plane and use fan-out vias close to the pads. For high-speed PWM outputs to gate drivers, keep trace lengths matched per phase to minimize skew-induced dead-time distortion. The 20x20 mm body has a thermal pad-free design, so dissipation is limited - estimated: at 60 MHz full activity the device draws roughly 60-100 mA, giving ~0.3 W dissipation, well within LQFP-144 natural convection limits, but verify against the datasheet current tables for your exact clock configuration.
コンプライアンス情報
Distributor listings (Master Electronics, Jotrin) state RoHS Compliant and Tray packaging for the -I/PL grade. Not an automotive AEC-Q100-qualified part; use the appropriate automotive-grade family member if AEC-Q100 is required.
