EP1SGX40GF1020I5N - Stratix GX FPGA 41,250 LEs FC-FBGA-1020 | Altera
部品番号: EP1SGX40GF1020I5N ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $245 | $245.00 |
| 10 | $225 | $2,250.00 |
| 100 | $195 | $19,500.00 |
| 500 | $165 | $82,500.00 |
| 1,000 | $140 | $140,000.00 |
EP1SGX40GF1020I5N 概要
A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), embedded memory, DSP blocks, and programmable interconnect. FPGAs belong to the broader class of programmable logic devices (PLDs) within the digital IC hierarchy, and Stratix GX extends the architecture with integrated multi-gigabit transceivers (MGTs) so designers can implement serial protocols directly on-chip without external PHY devices.
Key features include up to 3.1875 Gbps per channel CDR-based transceivers, on-chip rate matching compliant with IEEE 802.3 clause 36 for Gigabit Ethernet, embedded RAM, DSP blocks, and dedicated clock management. The 1020-ball FC-FBGA package provides a high I/O count for parallel interfaces alongside serial channels, enabling single-chip implementation of high-throughput bridging designs.
Typical applications include multi-gigabit serial backplanes, SONET/SDH and Gigabit Ethernet line cards, serial RapidIO and PCI Express endpoints, broadcast video routers, and high-end test and measurement equipment. The combination of logic density and integrated transceivers allows consolidation of PHY plus MAC plus protocol stack onto one silicon device.
When designing with this device, pay particular attention to power-rail sequencing (VCCINT before VCCIO) and decoupling density around the 1020-ball BGA. The commercial-grade (0 C to 85 C) variant of this speed grade -5 silicon should be reserved for benign thermal environments; for industrial deployments consider the I6 or I7 speed/grade codes.
ドロップイン代替品: EP1SGX40GF1020I5N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP1SGX40GF1020I5N （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Speed Grade, Process Technology, Family.
クイック比較ツール — 並列比較する代替部品を選択:
EP1SGX40GF1020I5
✅ ドロップイン✓ 在庫あり
$1325 / 個
データシートを見る →EP1SGX40GF1020C7
✅ ドロップイン✓ 在庫あり
$1475 / 個
データシートを見る →EP1SGX40GF1020C8
✅ ドロップイン✓ 在庫あり
$1390 / 個
データシートを見る →EP1SGX40DF1020I5N
✅ ドロップイン✓ 在庫あり
$388.5 / 個
データシートを見る →EP1SGX40CF1020I5
✅ ドロップイン✓ 在庫あり
$370 / 個
データシートを見る →EP1SGX40FF1020I5
✅ ドロップイン✓ 在庫あり
$695 / 個
データシートを見る →EP1SGX40GF1020I5N 最大定格＆電気的特性
| Family | Stratix GX |
| Logic Elements | 41,250 |
| Configurable Logic Blocks (CLBs) | 4,125 |
| Process Technology | 130 nm CMOS |
| Core Supply Voltage (VCCINT) | 1.425 V to 1.575 V (typ. 1.5 V) |
| High-Speed Transceiver Channels | 20 |
| Transceiver Data Rate | 500 Mbps to 3.1875 Gbps per channel |
| Aggregate Serial Bandwidth | Up to 127.5 Gbps full-duplex |
| 最大クロック周波数 | 5000 MHz (transceiver; 6 MHz reported by some distributor aggregators) |
| Combinatorial Delay | 7.49 ns per CLB (reported) |
| パッケージ | 1020-ball FineLine BGA (FC-FBGA), 33 x 33 mm, 1 mm pitch |
| 動作温度 | 0 C to +85 C (commercial; 'I' grade per some aggregators) |
| 実装タイプ | Surface Mount |
| Temperature Grade (per aggregator) | Military (per Vyrian aggregator listing) |
EP1SGX40GF1020I5N 1020-ball fineline bga (fc-fbga), 33 x 33 mm, 1 mm pitch ピン配置ガイド
EP1SGX40GF1020I5N (1020-ball fineline bga (fc-fbga), 33 x 33 mm, 1 mm pitch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP1SGX40GF1020I5N.
詳細は データシート をご参照ください。
主な用途
EP1SGX40GF1020I5N の用途: 6 件s: Multi-Gigabit Serial Backplane Routing, SONET/SDH and OTN Line Cards, PCI Express Endpoint / Root Complex, Broadcast Video Router / Switcher, High-Speed Test and Measurement Equipment, Serial RapidIO / Fibre Channel Aggregation.
Multi-Gigabit Serial Backplane Routing
EP1SGX40GF1020I5N is purpose-built for serial backplane routing in central-office and data-center switches, with 20 CDR-based transceiver channels at up to 3.1875 Gbps each and 41,250 logic elements for switch-fabric arbitration. The on-chip rate matcher complies with IEEE 802.3 clause 36 for Gigabit Ethernet idle insertion/removal, eliminating external PHY chips. Compared to a discrete SERDES-plus-FPGA two-chip solution, EP1SGX40GF1020I5N reduces PCB area by roughly 40% and lowers bill-of-materials cost while simplifying signal-integrity closure.
おすすめ
SONET/SDH and OTN Line Cards
EP1SGX40GF1020I5N supports OC-48/STM-16 (2.488 Gbps) and OTU1 (2.666 Gbps) line-card data rates directly through its on-chip transceivers, with the 41,250-LE fabric handling framer, mapper, and overhead-processing functions. The embedded CDR removes the need for external clock-recovery PLLs, simplifying the BOM and shortening design cycles. Designers targeting OC-192/STM-64 (10 Gbps) should migrate to Stratix II GX or later, because EP1SGX40 tops out at 3.1875 Gbps per lane.
おすすめ
PCI Express Endpoint / Root Complex
EP1SGX40GF1020I5N implements the Physical Media Attachment (PMA) and Physical Coding Sublayer (PCS) of PCI Express 1.0a endpoints through its built-in 2.5 Gbps transceivers, while the 41,250-LE fabric hosts the Transaction Layer and Data Link Layer. Designers can build x4 or x8 PCIe endpoints in a single chip without external PHY silicon. For PCIe Gen2 (5 Gbps) and Gen3 (8 Gbps), migrate to Stratix IV GX or Stratix 10, as EP1SGX40's maximum 3.1875 Gbps serial rate falls short of those speeds.
おすすめ
Broadcast Video Router / Switcher
EP1SGX40GF1020I5N's combination of 20 serial channels and 41,250 logic elements suits uncompressed HD-SDI (1.485 Gbps) and 3G-SDI (2.97 Gbps) routing matrices in broadcast studios. The on-chip transceivers meet the SMPTE 424M/425M jitter tolerance while the fabric handles crosspoint switching, audio embedding, and ancillary data processing. Compared with a discrete crosspoint switch plus glue logic, EP1SGX40GF1020I5N enables a single-chip router with reduced power and board area.
おすすめ
High-Speed Test and Measurement Equipment
EP1SGX40GF1020I5N's 20 CDR-based channels and high logic density suit protocol analyzers, BERT (bit-error-rate tester) platforms, and logic-analyzer acquisition cards that must capture multiple gigabit links simultaneously. The fabric implements pattern generation, error counting, and trigger logic while the transceivers deliver the physical interface. Designers value the 1 mm-pitch FC-FBGA for its accessible breakout to high-density test fixtures.
おすすめ
Serial RapidIO / Fibre Channel Aggregation
EP1SGX40GF1020I5N's 3.1875 Gbps transceivers handle 1x/4x Serial RapidIO (1.25, 2.5, 3.125 Gbps) and 1G/2G Fibre Channel (1.0625, 2.125 Gbps) aggregation nodes used in wireless base stations and storage routers. The 41,250-LE fabric implements protocol bridging, packet buffering, and congestion management without external memory controllers. Industrial and military programs with long lifecycle requirements continue to qualify EP1SGX40GF1020I5N despite its obsolete manufacturer status.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP1SGX40GF1020I5N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP1SGX40GF1020I5 | EP1SGX40GF1020C7 | EP1SGX40GF1020C8 | EP1SGX40DF1020I5N | EP1SGX40CF1020I5 | EP1SGX40FF1020I5 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 1020-ball FC-FBGA | 1020-ball FC-FBGA (same) | 1020-ball FC-FBGA (same) | 1020-ball FC-FBGA (same) | 1020-ball FC-FBGA (same) | 1020-ball FC-FBGA (same) | 1020-ball FC-FBGA (same) |
| Logic Elements | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 | 41,250 |
| Transceiver Channels | 20 | 20 | 20 | 20 | 20 (D-variant signal mix) | 0 (no transceivers) | 20 (enhanced FIFO) |
| Max Transceiver Rate (Gbps) | 3.1875 | 3.1875 | 3.1875 | 3.1875 | 3.1875 | N/A (no transceivers) | 3.1875 |
| Speed Grade | -5 | -5 | -7 (slower) | -8 (slowest) | -5 | -5 | -5 |
| Temperature Grade | Industrial (I5) | Industrial | Commercial | Commercial | Industrial | Industrial | Industrial |
主な差別化要因
- Highest-density Stratix GX variant with full 20-channel transceiver complement （vs EP1SGX40CF1020I5)
- Industrial temperature grade with lead-free termination （vs EP1SGX40GF1020I5)
- Faster speed grade than -7 and -8 silicon （vs EP1SGX40GF1020C7)
設計ノート
Estimated: Stratix GX EP1SGX40 with 20 active 3.1875 Gbps transceivers and ~70% logic utilization dissipates approximately 8-12 W from the 1.5 V core rail alone. Provide at least 6 low-impedance 0.1 uF + 10 uF ceramic decoupling pairs within 5 mm of the BGA balls, plus bulk polymer capacitors on each VCCIO bank. Sequence VCCINT before VCCIO per Altera's power-up guidelines to avoid I/O driver latch-up; an integrated supervisory IC such as the TPS3808 is recommended for the POR signal.
Estimated: With theta-JA around 12 C/W for the 33 x 33 mm FC-FBGA on a 12-layer JEDEC test board, 10 W dissipation produces roughly 120 C junction temperature rise above ambient - too high for commercial 85 C operation. Use a heatsink with thermal interface material or design a 6+ layer PCB with continuous inner-plane copper beneath the BGA footprint to reduce theta-JA below 8 C/W. Always validate thermal design with a real prototype before committing to enclosure thermal budgets.
The 1020-ball FC-FBGA at 1 mm pitch requires microvia (laser-drilled) stack-up fabrication. Use 8-12 layer PCB construction with sequential lamination to build the 0.1 mm via-on-pad structures. Maintain a continuous reference plane (GND) on layer 2 directly under the BGA to control impedance of the high-speed transceiver traces; route serial channels with 100 ohm differential impedance and skew matching to within 5 ps. Xilinx/Altera reference design layout files (available on the Altera Wiki archive) provide proven routing examples.
Do not confuse EP1SGX40G (suffix-less, the base family) with the package-suffixed 'GF1020I5N' ordering code - the latter includes speed grade, package, and lead-free information. Also verify your Quartus II version supports the specific silicon revision; Quartus 9.0 and later is recommended for stable synthesis of the 20-channel transceiver blocks. Always generate the Stratix GX PCB symbol from the Quartus pin-out file rather than hand-drafting it - mismatched GND/VCC pin assignments are a common bring-up failure.
コンプライアンス情報
Lead-free indicated by 'N' suffix in MPN; full RoHS/REACH documentation not present in verified web data - [DATA_NEEDED].
