EP2C35F672I8N - 33K LE Cyclone II FPGA, 672-BGA | Intel
部品番号: EP2C35F672I8N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $151.47 | $151.47 |
| 10 | $142.5 | $1,425.00 |
| 100 | $128 | $12,800.00 |
| 500 | $115 | $57,500.00 |
| 1,000 | $98.5 | $98,500.00 |
EP2C35F672I8N 概要
A Field-Programmable Gate Array is a reconfigurable digital integrated circuit whose logic fabric, interconnect, and I/O can be electrically programmed after PCB assembly. Within the broader silicon taxonomy, FPGAs sit alongside ASICs, microcontrollers, and DSPs as programmable logic devices, but uniquely offer hardware-level parallelism, sub-cycle latency, and on-the-fly reconfiguration. Cyclone II represents Altera's second-generation low-cost FPGA family, optimized for high-volume cost-sensitive designs where ASIC NRE is unjustified.
Key features of the EP2C35F672I8N include 33,216 logic elements, 35 embedded 18x18 multipliers (132 9x9 multipliers) for DSP-style arithmetic, 483,840 bits of embedded RAM arranged across M4K blocks, 475 user I/O pins, and four phase-locked loops for clock synthesis and management. The 672-BGA package provides 35x35 ball array with 1.0 mm pitch, enabling dense PCB escape routing while still allowing conventional reflow assembly.
Architecturally, the Cyclone II device uses a four-input look-up table (LUT4) logic element, true dual-port M4K memory blocks, and dedicated multiplier blocks adjacent to the logic array. The 672-BGA package supports up to 8 high-speed LVDS channels and 16 global clock networks. Configuration is loaded through passive serial (PS), fast passive parallel (FPP), or JTAG modes using the Altera Quartus design toolchain.
Typical applications span industrial motor control, video processing pipelines, software-defined radio front-ends, automotive driver-assistance prototyping, communications protocol bridging, and cost-optimized ASIC prototyping where moderate logic density and abundant I/O are required. The 475 user I/O count and 35 hardware multipliers make it well suited to parallel data acquisition and image preprocessing.
When designing with the EP2C35F672I8N, ensure the PCB layout honors the BGA escape pattern with microvia or via-in-pad technology to reach inner-layer routing. Confirm that JTAG, configuration, and decoupling pins are accessible to the programmer, and that the PLL power supply filtering follows the Cyclone II handbook reference schematic.
This page synthesizes distributor pricing, package-equivalent drop-in alternatives from the same Cyclone II family, and practical design notes not found in the manufacturer datasheet, giving the engineer a single source for cross-brand replacement decisions and reference-design companion parts.
ドロップイン代替品: EP2C35F672I8N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EP2C35F672I8N （同一形状・フットプリント） — 相違点: Package, Speed Grade, RoHS Status, Operating Temperature, Process Technology.
クイック比較ツール — 並列比較する代替部品を選択:
EP2C35F672I8
✅ ドロップイン✓ 在庫あり
$104.5 / 個
データシートを見る →EP2C35F672C8N
✅ ドロップイン✓ 在庫あり
$77.14 / 個
データシートを見る →EP2C35F672C7N
✅ ドロップイン✓ 在庫あり
$98 / 個
データシートを見る →EP2C35F672C6N
✅ ドロップイン✓ 在庫あり
$122.5 / 個
データシートを見る →EP2C35F672C8
✅ ドロップイン✓ 在庫あり
$71.85 / 個
データシートを見る →EP2C35F672C7
✅ ドロップイン✓ 在庫あり
$119.95 / 個
データシートを見る →EP2C35F672I8N 最大定格＆電気的特性
| Series | Cyclone II |
| Family | Cyclone II |
| Logic Elements (LE) | 33,216 |
| Total Memory Bits | 483,840 |
| Embedded Multipliers (18x18) | 35 |
| Embedded Multipliers (9x9) | 132 |
| User I/O Count | 475 |
| Number of PLLs | 4 |
| パッケージ | 672-BGA (FineLine) |
| Ball Pitch | 1.0 mm |
| Process Node | 90 nm CMOS |
| 動作温度 | -40C to +100C (industrial) |
| Speed Grade | 8 |
| 実装タイプ | Surface Mount |
| Lead-Free / RoHS | Yes (N suffix) |
| Configuration Modes | PS, FPP, JTAG |
| Supply Voltage Core | 1.2 V (typical) |
EP2C35F672I8N 672-bga (fineline) ピン配置ガイド
EP2C35F672I8N (672-bga (fineline) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: EP2C35F672I8N.
詳細は データシート をご参照ください。
主な用途
EP2C35F672I8N の用途: 6 件s: Industrial Motor Control, Video Processing Pipeline, Software Defined Radio (SDR) Front-End, ASIC Prototyping and Emulation, Automotive Driver Assistance Prototyping, Communications Protocol Bridging.
Industrial Motor Control
The EP2C35F672I8N fits industrial motor-control applications because its 33,216 logic elements can host multi-axis field-oriented control (FOC) state machines while the 35 dedicated 18x18 multipliers execute the Park/Clarke transforms and PI regulators in parallel. The 475 user I/O pins provide ample headroom for multi-channel PWM outputs, encoder feedback (QEP), and CAN/RS-485 comms. Industrial temperature grade -40C to +100C supports factory-floor deployment without derating. Used between the gate driver and the IGBT power stage, paired with EP2C20F256I8N as a co-processor for safety-watchdog logic.
おすすめ
Video Processing Pipeline
With 483,840 bits of embedded RAM organized in M4K blocks, the EP2C35F672I8N can buffer full-HD video lines in real time for deinterlacing, scaling, or color-space conversion. The 35 hardware multipliers accelerate 2D filter kernels (Sobel, Gaussian) and motion estimation, while 475 user I/O pins accommodate parallel ITU-R BT.656 / BT.1120 buses plus DDR memory interface. Industrial temperature grade suits outdoor digital signage and surveillance applications. Pairs naturally with EPCS configuration flash and external DDR SDRAM.
おすすめ
Software Defined Radio (SDR) Front-End
The EP2C35F672I8N's combination of 35 hardware multipliers and abundant logic elements makes it well suited to baseband DSP for narrow-band SDR prototypes, including digital down-conversion (DDC), channelization, and demodulation (PSK, QAM, FSK). The four PLLs generate the precise sampling clocks required for ADC interfacing. Industrial temperature grade enables portable field-deployable radios. Often used with high-speed ADC/DAC front-ends and paired with Cyclone II development kits.
おすすめ
ASIC Prototyping and Emulation
The 33,216 LE capacity positions EP2C35F672I8N as a mid-density ASIC prototyping platform, capable of emulating subsystems of larger ASIC designs including CPUs, DSPs, and protocol stacks. Designers partition ASIC RTL across multiple EP2C35F672I8N devices using the 475 user I/O as chip-to-chip interconnect channels. Industrial temperature grade supports bring-up in production test fixtures. Common in university and corporate ASIC bring-up labs.
おすすめ
Automotive Driver Assistance Prototyping
Although not AEC-Q100 qualified, the EP2C35F672I8N is widely used in pre-production prototyping of ADAS algorithms such as lane detection, radar pre-processing, and sensor fusion. The 475 user I/O pins accommodate multiple camera and radar sensor inputs simultaneously, while the 35 hardware multipliers handle real-time convolution and FFT operations. Engineering teams typically validate algorithms on this Cyclone II device before porting to AEC-Q100-qualified Cyclone III or Cyclone IV Auto parts.
おすすめ
Communications Protocol Bridging
The EP2C35F672I8N's 475 user I/O make it an effective bridge between legacy parallel buses and modern serial protocols such as SPI, I2C, UART, PCIe, and Ethernet. The 33,216 LE allow multiple protocol stacks to run concurrently with hardware state machines for low-latency packet forwarding. Industrial temperature grade supports telecom and industrial networking equipment. Often deployed in protocol converter and IoT gateway products.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EP2C35F672I8N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EP2C35F672I8 | EP2C35F672C8N | EP2C35F672C7N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 672-BGA (FineLine) | 672-BGA (FineLine) - same | 672-BGA (FineLine) - same | 672-BGA (FineLine) - same |
| Logic Elements | 33,216 LE | 33,216 LE | 33,216 LE | 33,216 LE |
| Embedded RAM | 483,840 bits | 483,840 bits | 483,840 bits | 483,840 bits |
| 18x18 Multipliers | 35 | 35 | 35 | 35 |
| User I/O Count | 475 | 475 | 475 | 475 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| Speed Grade | 8 | 8 | 8 | 7 (slower Fmax) |
| RoHS Compliance | Yes (N suffix) | No (SnPb finish) | Yes (N suffix) | Yes (N suffix) |
主な差別化要因
- Industrial temperature grade vs commercial-grade same-package alternatives （vs EP2C35F672C8N)
- Pb-free RoHS-compliant terminal finish vs legacy SnPb （vs EP2C35F672I8)
- Speed grade 8 vs speed grade 7 variants （vs EP2C35F672C7N)
設計ノート
The 672-BGA package uses 1.0 mm ball pitch, which is at the practical limit of conventional PCB fabrication. Designers should plan for microvia or via-in-pad technology to achieve reliable inner-layer escape routing. A 4-layer or 6-layer stack-up with buried capacitance is recommended for the inner power/ground plane pair. Maintain a continuous ground plane beneath the BGA to control return-path impedance and reduce SSO noise. Estimated: signal escape assumes 0.1 mm trace/space on outer microvia layer.
Cyclone II devices require at least three separate supply rails: VCCINT (1.2 V core), VCCIO (1.5 V to 3.3 V I/O bank, bank-dependent), and VCC_PLL (1.2 V analog PLL supply). Decoupling must follow the handbook reference schematic with 0.1 uF and 10 uF combinations near every power pin. Use a ferrite bead to isolate VCC_PLL from VCCINT noise. Estimated: bulk decoupling at 1 uF per PLLs and 0.1 uF per VCCIO pin.
Match JTAG chain length and impedance to the 4-wire TMS/TCK/TDO/TDI specification. Provide a robust 4.7 kohm pull-up on TCK and TDI, and route configuration signals away from switching I/O to avoid configuration corruption during power-up. Expose JTAG and AS/PS configuration mode pins to accessible test points or header pins for in-field reprogramming. Cyclone II recommends 25 MHz MSEL settings for active serial configuration with EPCS flash devices.
コンプライアンス情報
RoHS compliant per N suffix. Not AEC-Q100 qualified - choose AEC-Q100 qualified Cyclone III/IV Auto variants for automotive production. Conflict-minerals compliance per Intel program report.
