EP2C35F672I8N - 33K LE Cyclone II FPGA, 672-BGA | Intel
MPN: EP2C35F672I8N ✓ فعالEP2C35F672I8N نمای کلی
A Field-Programmable Gate Array is a reconfigurable digital integrated circuit whose logic fabric, interconnect, and I/O can be electrically programmed after PCB assembly. Within the broader silicon taxonomy, FPGAs sit alongside ASICs, microcontrollers, and DSPs as programmable logic devices, but uniquely offer hardware-level parallelism, sub-cycle latency, and on-the-fly reconfiguration. Cyclone II represents Altera's second-generation low-cost FPGA family, optimized for high-volume cost-sensitive designs where ASIC NRE is unjustified.
Key features of the EP2C35F672I8N include 33,216 logic elements, 35 embedded 18x18 multipliers (132 9x9 multipliers) for DSP-style arithmetic, 483,840 bits of embedded RAM arranged across M4K blocks, 475 user I/O pins, and four phase-locked loops for clock synthesis and management. The 672-BGA package provides 35x35 ball array with 1.0 mm pitch, enabling dense PCB escape routing while still allowing conventional reflow assembly.
Architecturally, the Cyclone II device uses a four-input look-up table (LUT4) logic element, true dual-port M4K memory blocks, and dedicated multiplier blocks adjacent to the logic array. The 672-BGA package supports up to 8 high-speed LVDS channels and 16 global clock networks. Configuration is loaded through passive serial (PS), fast passive parallel (FPP), or JTAG modes using the Altera Quartus design toolchain.
Typical applications span industrial motor control, video processing pipelines, software-defined radio front-ends, automotive driver-assistance prototyping, communications protocol bridging, and cost-optimized ASIC prototyping where moderate logic density and abundant I/O are required. The 475 user I/O count and 35 hardware multipliers make it well suited to parallel data acquisition and image preprocessing.
When designing with the EP2C35F672I8N, ensure the PCB layout honors the BGA escape pattern with microvia or via-in-pad technology to reach inner-layer routing. Confirm that JTAG, configuration, and decoupling pins are accessible to the programmer, and that the PLL power supply filtering follows the Cyclone II handbook reference schematic.
This page synthesizes distributor pricing, package-equivalent drop-in alternatives from the same Cyclone II family, and practical design notes not found in the manufacturer datasheet, giving the engineer a single source for cross-brand replacement decisions and reference-design companion parts.
جایگزین‌های drop-in برای EP2C35F672I8N — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونه‌ها در این سری
مدل‌های هم‌سری که جایگزین مستقیم هستند برای EP2C35F672I8N (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Speed Grade, RoHS Status, Operating Temperature, Process Technology.
EP2C35F672I8
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672C8N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672C7N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672C6N
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672C8
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672C7
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EP2C35F672I8N حداکثر مقادیر مجاز و مشخصات الکتریکی
| Series | Cyclone II |
| Family | Cyclone II |
| Logic Elements (LE) | 33,216 |
| Total Memory Bits | 483,840 |
| Embedded Multipliers (18x18) | 35 |
| Embedded Multipliers (9x9) | 132 |
| User I/O Count | 475 |
| Number of PLLs | 4 |
| بسته‌بندی | 672-BGA (FineLine) |
| Ball Pitch | 1.0 mm |
| Process Node | 90 nm CMOS |
| دمای کاری | -40C to +100C (industrial) |
| Speed Grade | 8 |
| نوع نصب | Surface Mount |
| Lead-Free / RoHS | Yes (N suffix) |
| Configuration Modes | PS, FPP, JTAG |
| Supply Voltage Core | 1.2 V (typical) |
راهنمای پیکربندی پین EP2C35F672I8N 672-bga (fineline)
پیکربندی پین برای EP2C35F672I8N (پکیج 672-bga (fineline)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.
داده پین‌آوت تفصیلی موجود نیست برای EP2C35F672I8N.
به دیتاشیت برای پیکربندی کامل پین‌ها.
کاربردهای معمول
EP2C35F672I8N مناسب است برای 6 کاربردs: Industrial Motor Control, Video Processing Pipeline, Software Defined Radio (SDR) Front-End, ASIC Prototyping and Emulation, Automotive Driver Assistance Prototyping, Communications Protocol Bridging.
Industrial Motor Control
The EP2C35F672I8N fits industrial motor-control applications because its 33,216 logic elements can host multi-axis field-oriented control (FOC) state machines while the 35 dedicated 18x18 multipliers execute the Park/Clarke transforms and PI regulators in parallel. The 475 user I/O pins provide ample headroom for multi-channel PWM outputs, encoder feedback (QEP), and CAN/RS-485 comms. Industrial temperature grade -40C to +100C supports factory-floor deployment without derating. Used between the gate driver and the IGBT power stage, paired with EP2C20F256I8N as a co-processor for safety-watchdog logic.
پیشنهادی
Video Processing Pipeline
With 483,840 bits of embedded RAM organized in M4K blocks, the EP2C35F672I8N can buffer full-HD video lines in real time for deinterlacing, scaling, or color-space conversion. The 35 hardware multipliers accelerate 2D filter kernels (Sobel, Gaussian) and motion estimation, while 475 user I/O pins accommodate parallel ITU-R BT.656 / BT.1120 buses plus DDR memory interface. Industrial temperature grade suits outdoor digital signage and surveillance applications. Pairs naturally with EPCS configuration flash and external DDR SDRAM.
پیشنهادی
Software Defined Radio (SDR) Front-End
The EP2C35F672I8N's combination of 35 hardware multipliers and abundant logic elements makes it well suited to baseband DSP for narrow-band SDR prototypes, including digital down-conversion (DDC), channelization, and demodulation (PSK, QAM, FSK). The four PLLs generate the precise sampling clocks required for ADC interfacing. Industrial temperature grade enables portable field-deployable radios. Often used with high-speed ADC/DAC front-ends and paired with Cyclone II development kits.
پیشنهادی
ASIC Prototyping and Emulation
The 33,216 LE capacity positions EP2C35F672I8N as a mid-density ASIC prototyping platform, capable of emulating subsystems of larger ASIC designs including CPUs, DSPs, and protocol stacks. Designers partition ASIC RTL across multiple EP2C35F672I8N devices using the 475 user I/O as chip-to-chip interconnect channels. Industrial temperature grade supports bring-up in production test fixtures. Common in university and corporate ASIC bring-up labs.
پیشنهادی
Automotive Driver Assistance Prototyping
Although not AEC-Q100 qualified, the EP2C35F672I8N is widely used in pre-production prototyping of ADAS algorithms such as lane detection, radar pre-processing, and sensor fusion. The 475 user I/O pins accommodate multiple camera and radar sensor inputs simultaneously, while the 35 hardware multipliers handle real-time convolution and FFT operations. Engineering teams typically validate algorithms on this Cyclone II device before porting to AEC-Q100-qualified Cyclone III or Cyclone IV Auto parts.
پیشنهادی
Communications Protocol Bridging
The EP2C35F672I8N's 475 user I/O make it an effective bridge between legacy parallel buses and modern serial protocols such as SPI, I2C, UART, PCIe, and Ethernet. The 33,216 LE allow multiple protocol stacks to run concurrently with hardware state machines for low-latency packet forwarding. Industrial temperature grade supports telecom and industrial networking equipment. Often deployed in protocol converter and IoT gateway products.
پیشنهادی
خلاصه محصولات پیشنهادی
داده‌های مرجع مهندسی برای EP2C35F672I8N — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزین‌ها
| پارامتر | این محصول | EP2C35F672I8 | EP2C35F672C8N | EP2C35F672C7N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 672-BGA (FineLine) | 672-BGA (FineLine) - same | 672-BGA (FineLine) - same | 672-BGA (FineLine) - same |
| Logic Elements | 33,216 LE | 33,216 LE | 33,216 LE | 33,216 LE |
| Embedded RAM | 483,840 bits | 483,840 bits | 483,840 bits | 483,840 bits |
| 18x18 Multipliers | 35 | 35 | 35 | 35 |
| User I/O Count | 475 | 475 | 475 | 475 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| Speed Grade | 8 | 8 | 8 | 7 (slower Fmax) |
| RoHS Compliance | Yes (N suffix) | No (SnPb finish) | Yes (N suffix) | Yes (N suffix) |
تفاوت‌های کلیدی
- Industrial temperature grade vs commercial-grade same-package alternatives (در مقابلEP2C35F672C8N)
- Pb-free RoHS-compliant terminal finish vs legacy SnPb (در مقابلEP2C35F672I8)
- Speed grade 8 vs speed grade 7 variants (در مقابلEP2C35F672C7N)
یادداشت‌های طراحی
The 672-BGA package uses 1.0 mm ball pitch, which is at the practical limit of conventional PCB fabrication. Designers should plan for microvia or via-in-pad technology to achieve reliable inner-layer escape routing. A 4-layer or 6-layer stack-up with buried capacitance is recommended for the inner power/ground plane pair. Maintain a continuous ground plane beneath the BGA to control return-path impedance and reduce SSO noise. Estimated: signal escape assumes 0.1 mm trace/space on outer microvia layer.
Cyclone II devices require at least three separate supply rails: VCCINT (1.2 V core), VCCIO (1.5 V to 3.3 V I/O bank, bank-dependent), and VCC_PLL (1.2 V analog PLL supply). Decoupling must follow the handbook reference schematic with 0.1 uF and 10 uF combinations near every power pin. Use a ferrite bead to isolate VCC_PLL from VCCINT noise. Estimated: bulk decoupling at 1 uF per PLLs and 0.1 uF per VCCIO pin.
Match JTAG chain length and impedance to the 4-wire TMS/TCK/TDO/TDI specification. Provide a robust 4.7 kohm pull-up on TCK and TDI, and route configuration signals away from switching I/O to avoid configuration corruption during power-up. Expose JTAG and AS/PS configuration mode pins to accessible test points or header pins for in-field reprogramming. Cyclone II recommends 25 MHz MSEL settings for active serial configuration with EPCS flash devices.
اطلاعات انطباق
RoHS compliant per N suffix. Not AEC-Q100 qualified - choose AEC-Q100 qualified Cyclone III/IV Auto variants for automotive production. Conflict-minerals compliance per Intel program report.
