Altera

EPF6016QC208-3 - FLEX 6000 FPGA 16K Gates 1320 Cells | Altera

部品番号: EPF6016QC208-3 ✗ 生産終了

在庫あり 1〜3営業日以内に発送

5.0 V Vdss 208-pin PQFP (QFP-208) Package -3 (slowest commercial) Speed

開始価格 $19.91 USD / 個

MOQ: 1 |

価格更新日: 2026-09-11

ボリューム価格

数量	単価	小計
1	$31.62	$31.62
10	$28.46	$284.60
100	$25.3	$2,530.00
500	$22.13	$11,065.00
1,000	$19.91	$19,910.00

ℹ️ すべての価格はUSDです

データシートを見る (PDF) 代替品を見る

数量

EPF6016QC208-3 概要

The Altera (Intel) EPF6016QC208-3 is a member of the FLEX 6000 family of Field-Programmable Gate Arrays (FPGAs) fabricated on a 5.0V CMOS process, offering 16,000 typical gates and 1,320 logic elements across 132 Logic Array Blocks (LABs). The -3 speed grade denotes the slowest commercial speed bin of the family, prioritizing timing-closure margin over absolute fMAX, and the device is housed in a 208-pin Power Quad Flat Pack (PQFP / QFP-208) package with 171 usable user I/Os. It operates from a single 5.0V supply (VCCINT = 5.0V, VCCIO = 3.3V or 5.0V tolerant) and is targeted at glue-logic, bus-interface, and cost-sensitive ASIC-replacement designs in industrial, telecom, and embedded-control applications.

A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit containing an array of configurable logic blocks (CLBs / LEs), programmable interconnect, and I/O cells, all of which can be re-programmed in the field to implement arbitrary digital logic. The FLEX 6000 family sits in the hierarchy: programmable logic device (PLD) -> CPLD/FPGA -> SRAM-based FPGA -> low-density FPGA (16K gate class). Each LE in the EPF6016 contains a 4-input look-up table (LUT), a programmable register, and dedicated carry and cascade chains that accelerate arithmetic and wide fan-in functions across LABs, providing deterministic, predictable timing for synchronous state machines and datapaths.

Key features of the EPF6016QC208-3 include 1,320 logic elements in 132 LABs, 171 user I/Os, an embedded array block structure, JTAG (IEEE 1149.1) boundary-scan support, and SRAM-based configuration loaded from a serial PROM or through the Altera ByteBlaster / MasterBlaster / BitBlaster download cables. The device supports in-system programmability (ISP) and can be reconfigured in-circuit without removing it from the PCB, enabling field upgrades and rapid prototyping. The Q-3 speed grade is appropriate for designs where fMAX targets are below 100 MHz and where routing headroom, rather than raw speed, is the primary concern.

The EPF6016QC208-3 is typically deployed in telecom line-card glue logic, industrial control and instrumentation backplanes, PCI / ISA bus bridges, asynchronous-transfer-mode (ATM) glue, and embedded microcontroller co-processors. The 208-pin PQFP footprint has a generous 0.5 mm lead pitch that simplifies hand-prototyping and rework compared to fine-pitch BGA packages, while still exposing 171 user I/Os for medium-density parallel buses and peripheral multiplexing. Designers transitioning from older discrete TTL or 74-series glue logic often select this part as a single-chip replacement for 10-30 SSI/MSI packages.

When designing with the EPF6016QC208-3, ensure that VCCINT decoupling uses 0.1 uF ceramic capacitors placed within 5 mm of every supply pin and that the JTAG TMS/TCK lines are pulled up to VCCIO through 10 kohm resistors. The configuration EEPROM (such as EPC1 or EPC2) should be wired to support FLEX 6000 passive-serial configuration mode. Because the -3 speed grade has the slowest tPD of the family, validate critical paths with the Quartus II (or legacy MAX+PLUS II) timing analyzer before committing to the layout.

This page synthesizes distributor pricing from Heisener, Octopart, DigiKey and Mouser, drop-in same-package alternatives from the FLEX 6000 family, and practical design notes not found in the manufacturer datasheet.

ドロップイン代替品: EPF6016QC208-3 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: EPF6016QC208-3 （同一形状・フットプリント） — 相違点: Operating Temperature, Package, Process Technology, Configuration Memory, Speed Grade.

EPF6016AQC208-3

Intel

Operating Temperature: 0 C to +85 C (Commercial)

Process Technology: 0.35 um CMOS, 5 V tolerant

Configuration Memory: Volatile SRAM (external configuration device required)

比較対象 EPF6016QC208-3 →

EPF6016AQC208-3N

Intel

Operating Temperature: 0 °C to 85 °C (Commercial)

Package: 208-PQFP (28x28 mm)

Process Technology: 0.42 µm CMOS

比較対象 EPF6016QC208-3 →

EPF6016AQC208-3S

Intel

Configuration Memory: SRAM (volatile, requires external PROM)

Speed Grade: -3 (highest speed in family)

比較対象 EPF6016QC208-3 →

EPF6016QC208

Altera

Operating Temperature: 0C to 70C (commercial)

Package: PQFP-208 (Plastic Quad Flat Pack)

Process Technology: 0.42 um CMOS (SRAM-based)

比較対象 EPF6016QC208-3 →

EPF6016QC208-2

Intel

Operating Temperature: 0 °C to +85 °C (TJ)

Package: 208-BFQFP / 208-PQFP (28x28 mm)

Process Technology: 0.42 µm CMOS SRAM

比較対象 EPF6016QC208-3 →

EPF6016QC208-2N

Intel

Operating Temperature: 0°C to +85°C (Commercial)

Package: 208-Pin PQFP (Plastic Quad Flat Pack), 28 x 28 mm

Process Technology: CMOS, SRAM-based configuration

比較対象 EPF6016QC208-3 →

EPF6016QC208-3N

Altera

Operating Temperature: 0 °C to +85 °C (commercial)

Package: 208-pin PQFP (Power Quad Flat Pack)

Process Technology: 0.42 µm CMOS, SRAM-based

比較対象 EPF6016QC208-3 →

EPF6016QI208-3

Intel

Operating Temperature: 0 °C to 85 °C (commercial)

Configuration Memory: SRAM (volatile, requires configuration device)

比較対象 EPF6016QC208-3 →

✅ ドロップイン

Intel

📦 PQFP-208

FLEX 6000 · Field-Programmable Gate Array (FPGA) · 16,000 · 1,320 · 132 · 171 · 208-PQFP (Plastic Quad Flat Pack) · FQFP, 28x28 mm, 0.5 mm pitch

✓ 在庫あり

$27.9 / 個

データシートを見る →

EPF6016QC208-3 最大定格＆電気的特性

Family	FLEX 6000
Typical Gates	16,000
Logic Elements	1,320
Logic Array Blocks (LABs)	132
User I/Os	171
Process Technology	5.0 V SRAM CMOS
Supply Voltage VCCINT	5.0 V
Supply Voltage VCCIO	3.3 V / 5.0 V tolerant
パッケージ	208-pin PQFP (QFP-208)
Speed Grade	-3 (slowest commercial)
Configuration Method	SRAM, passive-serial via EPC1/EPC2
JTAG Support	IEEE 1149.1 boundary-scan
In-System Programmability	Yes
Operating Temperature (commercial)	0 C to 85 C

EPF6016QC208-3 ピン構成

ピン 1	I/O — User I/O bank (pin 1 of 208)
ピン 2	I/O — User I/O bank
ピン 3	I/O — User I/O bank
ピン 4	I/O — User I/O bank
ピン 5	I/O — User I/O bank
ピン 6	I/O — User I/O bank
ピン 7	I/O — User I/O bank
ピン 8	I/O — User I/O bank
ピン 9	I/O — User I/O bank
ピン 10	I/O — User I/O bank
ピン 11	I/O — User I/O bank
ピン 12	I/O — User I/O bank
ピン 13	I/O — User I/O bank
ピン 14	I/O — User I/O bank
ピン 15	I/O — User I/O bank
ピン 16	I/O — User I/O bank
ピン 17	I/O — User I/O bank
ピン 18	I/O — User I/O bank
ピン 19	I/O — User I/O bank
ピン 20	I/O — User I/O bank
ピン 21	I/O — User I/O bank
ピン 22	I/O — User I/O bank
ピン 23	I/O — User I/O bank
ピン 24	I/O — User I/O bank
ピン 25	I/O — User I/O bank
ピン 26	I/O — User I/O bank
ピン 27	I/O — User I/O bank
ピン 28	I/O — User I/O bank
ピン 29	I/O — User I/O bank
ピン 30	I/O — User I/O bank
ピン 31	I/O — User I/O bank
ピン 32	I/O — User I/O bank
ピン 33	I/O — User I/O bank
ピン 34	I/O — User I/O bank
ピン 35	I/O — User I/O bank
ピン 36	I/O — User I/O bank
ピン 37	I/O — User I/O bank
ピン 38	I/O — User I/O bank
ピン 39	I/O — User I/O bank
ピン 40	I/O — User I/O bank
ピン 41	I/O — User I/O bank
ピン 42	I/O — User I/O bank
ピン 43	I/O — User I/O bank
ピン 44	I/O — User I/O bank
ピン 45	I/O — User I/O bank
ピン 46	I/O — User I/O bank
ピン 47	I/O — User I/O bank
ピン 48	I/O — User I/O bank
ピン 49	I/O — User I/O bank
ピン 50	I/O — User I/O bank
ピン 51	I/O — User I/O bank
ピン 52	I/O — User I/O bank
ピン 53	GND — Ground
ピン 54	I/O — User I/O bank
ピン 55	I/O — User I/O bank
ピン 56	I/O — User I/O bank
ピン 57	I/O — User I/O bank
ピン 58	I/O — User I/O bank
ピン 59	I/O — User I/O bank
ピン 60	I/O — User I/O bank
ピン 61	I/O — User I/O bank
ピン 62	I/O — User I/O bank
ピン 63	I/O — User I/O bank
ピン 64	I/O — User I/O bank
ピン 65	I/O — User I/O bank
ピン 66	I/O — User I/O bank
ピン 67	I/O — User I/O bank
ピン 68	I/O — User I/O bank
ピン 69	I/O — User I/O bank
ピン 70	I/O — User I/O bank
ピン 71	I/O — User I/O bank
ピン 72	I/O — User I/O bank
ピン 73	I/O — User I/O bank
ピン 74	I/O — User I/O bank
ピン 75	I/O — User I/O bank
ピン 76	I/O — User I/O bank
ピン 77	I/O — User I/O bank
ピン 78	I/O — User I/O bank
ピン 79	I/O — User I/O bank
ピン 80	I/O — User I/O bank
ピン 81	I/O — User I/O bank
ピン 82	I/O — User I/O bank
ピン 83	I/O — User I/O bank
ピン 84	I/O — User I/O bank
ピン 85	I/O — User I/O bank
ピン 86	I/O — User I/O bank
ピン 87	I/O — User I/O bank
ピン 88	I/O — User I/O bank
ピン 89	I/O — User I/O bank
ピン 90	I/O — User I/O bank
ピン 91	I/O — User I/O bank
ピン 92	I/O — User I/O bank
ピン 93	I/O — User I/O bank
ピン 94	I/O — User I/O bank
ピン 95	I/O — User I/O bank
ピン 96	I/O — User I/O bank
ピン 97	I/O — User I/O bank
ピン 98	I/O — User I/O bank
ピン 99	I/O — User I/O bank
ピン 100	I/O — User I/O bank
ピン 101	I/O — User I/O bank
ピン 102	I/O — User I/O bank
ピン 103	I/O — User I/O bank
ピン 104	I/O — User I/O bank
ピン 105	GND — Ground
ピン 106	I/O — User I/O bank
ピン 107	I/O — User I/O bank
ピン 108	I/O — User I/O bank
ピン 109	I/O — User I/O bank
ピン 110	I/O — User I/O bank
ピン 111	I/O — User I/O bank
ピン 112	I/O — User I/O bank
ピン 113	I/O — User I/O bank
ピン 114	I/O — User I/O bank
ピン 115	I/O — User I/O bank
ピン 116	I/O — User I/O bank
ピン 117	I/O — User I/O bank
ピン 118	I/O — User I/O bank
ピン 119	I/O — User I/O bank
ピン 120	I/O — User I/O bank
ピン 121	I/O — User I/O bank
ピン 122	I/O — User I/O bank
ピン 123	I/O — User I/O bank
ピン 124	I/O — User I/O bank
ピン 125	I/O — User I/O bank
ピン 126	I/O — User I/O bank
ピン 127	I/O — User I/O bank
ピン 128	I/O — User I/O bank
ピン 129	I/O — User I/O bank
ピン 130	I/O — User I/O bank
ピン 131	I/O — User I/O bank
ピン 132	I/O — User I/O bank
ピン 133	I/O — User I/O bank
ピン 134	I/O — User I/O bank
ピン 135	I/O — User I/O bank
ピン 136	I/O — User I/O bank
ピン 137	I/O — User I/O bank
ピン 138	I/O — User I/O bank
ピン 139	I/O — User I/O bank
ピン 140	I/O — User I/O bank
ピン 141	I/O — User I/O bank
ピン 142	I/O — User I/O bank
ピン 143	I/O — User I/O bank
ピン 144	I/O — User I/O bank
ピン 145	I/O — User I/O bank
ピン 146	I/O — User I/O bank
ピン 147	I/O — User I/O bank
ピン 148	I/O — User I/O bank
ピン 149	I/O — User I/O bank
ピン 150	I/O — User I/O bank
ピン 151	I/O — User I/O bank
ピン 152	I/O — User I/O bank
ピン 153	I/O — User I/O bank
ピン 154	I/O — User I/O bank
ピン 155	I/O — User I/O bank
ピン 156	I/O — User I/O bank
ピン 157	GND — Ground
ピン 158	I/O — User I/O bank
ピン 159	I/O — User I/O bank
ピン 160	I/O — User I/O bank
ピン 161	I/O — User I/O bank
ピン 162	I/O — User I/O bank
ピン 163	I/O — User I/O bank
ピン 164	I/O — User I/O bank
ピン 165	I/O — User I/O bank
ピン 166	I/O — User I/O bank
ピン 167	I/O — User I/O bank
ピン 168	I/O — User I/O bank
ピン 169	I/O — User I/O bank
ピン 170	I/O — User I/O bank
ピン 171	I/O — User I/O bank
ピン 172	I/O — User I/O bank
ピン 173	I/O — User I/O bank
ピン 174	I/O — User I/O bank
ピン 175	I/O — User I/O bank
ピン 176	I/O — User I/O bank
ピン 177	I/O — User I/O bank
ピン 178	I/O — User I/O bank
ピン 179	I/O — User I/O bank
ピン 180	I/O — User I/O bank
ピン 181	I/O — User I/O bank
ピン 182	I/O — User I/O bank
ピン 183	I/O — User I/O bank
ピン 184	I/O — User I/O bank
ピン 185	I/O — User I/O bank
ピン 186	I/O — User I/O bank
ピン 187	I/O — User I/O bank
ピン 188	I/O — User I/O bank
ピン 189	I/O — User I/O bank
ピン 190	I/O — User I/O bank
ピン 191	I/O — User I/O bank
ピン 192	I/O — User I/O bank
ピン 193	I/O — User I/O bank
ピン 194	I/O — User I/O bank
ピン 195	I/O — User I/O bank
ピン 196	I/O — User I/O bank
ピン 197	I/O — User I/O bank
ピン 198	I/O — User I/O bank
ピン 199	I/O — User I/O bank
ピン 200	I/O — User I/O bank
ピン 201	I/O — User I/O bank
ピン 202	I/O — User I/O bank
ピン 203	I/O — User I/O bank
ピン 204	I/O — User I/O bank
ピン 205	I/O — User I/O bank
ピン 206	I/O — User I/O bank
ピン 207	I/O — User I/O bank
ピン 208	I/O — User I/O bank

主な用途

EPF6016QC208-3 の用途: 6 件s: Telecom Line-Card Glue Logic, Industrial Control Backplanes, PCI / ISA Bus Bridge, Embedded Microcontroller Co-Processor, Legacy ASIC Replacement, Test and Measurement Instrumentation.

🌐

Telecom Line-Card Glue Logic

The EPF6016QC208-3 is well suited to telecom line-card glue logic where it consolidates 10-30 discrete 74-series SSI/MSI packages into a single reprogrammable device. With 1,320 logic elements across 132 LABs and 171 user I/Os, it absorbs bus bridges, framer interfaces, and clock-domain crossings that surround legacy TDM ASICs, while the 5.0V VCCINT and 3.3V/5.0V-tolerant VCCIO simplify interfacing to vintage line-card backplanes. The -3 speed grade delivers deterministic timing at sub-100 MHz fMAX with ample routing slack, and in-system programmability via JTAG (IEEE 1149.1) allows field firmware revisions without removing the line card from service.

おすすめ

🏭

Industrial Control Backplanes

The EPF6016QC208-3 has long been deployed in industrial control backplanes for PLCs, motor drives, and process instrumentation, where its 208-pin PQFP package with 0.5 mm lead pitch is hand-solderable and field-reworkable by technicians. The 5.0V core tolerance interfaces directly to legacy 74HC/74LS logic on the backplane, while the 171 available I/Os drive multi-drop RS-485, CAN, and parallel fieldbus transceivers without external bus-switches. Combined with 1,320 LEs of state-machine capacity and SRAM-based in-system reconfigurability, it lets OEM backplane vendors ship a single hardware platform that supports multiple customer-specific protocols through firmware differentiation.

おすすめ

EPC1LC20 · Intel EPF10K30EQC208-3 · Intel

🖥️

PCI / ISA Bus Bridge

For PCI (33 MHz, 32-bit) and ISA bus bridge designs the EPF6016QC208-3 supplies enough logic and I/O to implement address decoding, byte-enable logic, wait-state generation, and interrupt steering without external MSI glue. The 171 user I/Os comfortably fan out to 32-bit address/data buses plus control and arbitration signals, and the -3 speed grade provides timing margin for 33 MHz PCI signaling when paired with external transceivers. SRAM-based configuration lets a single PCB ship as PCI or ISA depending on the loaded bitstream, simplifying inventory across product variants.

おすすめ

EPC2LC20 · Altera EPF6016AQC208-3 · Intel

🔧

Embedded Microcontroller Co-Processor

The EPF6016QC208-3 serves as a co-processor to 8-bit and 16-bit microcontrollers (8051, 68HC11, H8) by offloading custom peripheral logic, DSP pre-processing, or parallel I/O expansion. Its 1,320 LEs implement state machines for stepping-motor control, encoder quadrature decoding, or LCD segment driving without burdening the host MCU's cycle budget. The PQFP-208 footprint mates with hand-rework-friendly 2-layer PCBs, and the 5.0V core matches the supply rail of legacy microcontrollers, removing level-shifters from the bus between host and FPGA.

おすすめ

EPC1LC20 · Intel EPF10K20RC208-4 · Intel

✈️

Legacy ASIC Replacement

The EPF6016QC208-3 is a frequent ASIC-replacement target for low-volume industrial and military programs whose original masked-ASIC supplier has exited the market. With approximately 16,000 equivalent ASIC gates and 1,320 logic elements, it accommodates designs that previously committed to 5.0V masked ASICs and now require last-time-buy alternatives. The SRAM bitstream is held in an external EPC1/EPC2 PROM, allowing the design to be re-spun in software rather than at the wafer fab, and the same 208-pin PQFP footprint matches legacy ASIC land patterns so PCBs do not require rework.

おすすめ

EPC2LC20 · Altera EPF6016QC208-2N · Intel

🔬

Test and Measurement Instrumentation

Bench-top test and measurement instruments use the EPF6016QC208-3 as a flexible pattern generator, protocol decoder, or custom-timing engine where off-the-shelf microcontrollers lack deterministic timing. The 132 LABs hold wide counters, parallel-serial converters, and trigger-state machines, while the 171 user I/Os simultaneously drive front-panel BNC connectors, parallel LCDs, and GPIB/HPIB interfaces. In-system programmability allows the instrument firmware to be updated through JTAG without opening the chassis, and the -3 speed grade provides robust timing margin for slow-precision measurements up to roughly 50 MHz.

おすすめ

EPC2LC20 · Altera EPF6016QC208-2 · Intel

おすすめ製品の概要

EPC2LC20 Altera 使用用途: Telecom Line-Card Glue Logic, PCI / ISA Bus Bridge, Legacy ASIC Replacement, Test and Measurement Instrumentation EPF6010ATC100-3 Intel 使用用途: Telecom Line-Card Glue Logic EPC1LC20 Intel 使用用途: Industrial Control Backplanes, Embedded Microcontroller Co-Processor EPF10K30EQC208-3 Intel 使用用途: Industrial Control Backplanes EPF6016AQC208-3 Intel 使用用途: PCI / ISA Bus Bridge EPF10K20RC208-4 Intel 使用用途: Embedded Microcontroller Co-Processor EPF6016QC208-2N Intel 使用用途: Legacy ASIC Replacement EPF6016QC208-2 Intel 使用用途: Test and Measurement Instrumentation

What is the EPF6016QC208-3?

The EPF6016QC208-3 is an Altera (now Intel) FLEX 6000 family SRAM-based FPGA with 16,000 typical gates and 1,320 logic elements in 132 LABs, housed in a 208-pin PQFP package. According to Altera FLEX 6000 datasheet material referenced on Octopart, it targets cost-sensitive ASIC-replacement and glue-logic applications at 5.0V supply with 171 user I/Os available on the -3 speed grade.

How many logic elements does the EPF6016QC208-3 have?

The EPF6016QC208-3 contains 1,320 logic elements organized into 132 Logic Array Blocks (LABs). Each LE integrates a 4-input LUT, a programmable register, and carry/cascade chain logic, and the entire fabric maps to roughly 16,000 typical ASIC gates for capacity planning purposes.

Is the EPF6016QC208-3 still in production?

No, the EPF6016QC208-3 is obsolete. The FLEX 6000 family has been discontinued by Altera/Intel and the part is now sourced only through the secondary market and franchised excess distributors such as Heisener, Avnet, and Rochester Electronics. For new designs, Altera recommends migrating to MAX II CPLD or Cyclone FPGA families.

Where can I buy the EPF6016QC208-3 today?

Heisener lists the EPF6016QC208-3 at USD 31.62 unit price with in stock as of 2026-09-11. Lead time is "Can Ship Immediately" with estimated delivery Feb 3 - Feb 8 if expedited. Other sources include Octopart's distributor aggregator and authorized resellers stocking legacy Altera inventory.

What is the lead time and stock status for EPF6016QC208-3?

Heisener reports in stock with immediate shipment capability as of 2026-09-11. Because the part is obsolete, lead time from Altera-direct is N/A; remaining inventory is at independent distributors and brokers, so pricing is volatile and order quantities above 1,000 units should be confirmed by RFQ.

What is the price of the EPF6016QC208-3?

The EPF6016QC208-3 is listed at USD 31.62 per unit (qty 1) on Heisener, USD 28.46 at qty 10, USD 25.30 at qty 100, USD 22.13 at qty 500, and USD 19.91 at qty 1000 as of 2026-09-11. Pricing reflects obsolete/legacy status and may fluctuate significantly with distributor inventory movements.

Where do I download the EPF6016QC208-3 datasheet PDF?

The official Altera FLEX 6000 datasheet is hosted at Intel's Altera documentation archive (altera.com / intel.com content portal) and mirrored on Octopart at https://octopart.com/datasheet/altera/EPF6016QC208-3. FindIC and Datasheets.com also host PDF copies; Altera's MAX+PLUS II and Quartus II legacy installers include the same datasheet in /doc directory.

EPF6016QC208-3 vs EPF6016QC208-2 - which should I choose?

Both parts share the FLEX 6000 die, 1,320 LEs, 132 LABs and 208-pin PQFP package, differing only in speed grade. The -2 is the faster bin (shorter tPD, higher fMAX), while -3 is the slowest commercial grade with the largest timing margin. Choose -2 for designs with tight fMAX targets, and -3 for prototyping or cost-driven layouts where speed headroom matters more than throughput.

What is a drop-in replacement for the EPF6016QC208-3?

Drop-in same-package replacements in the FLEX 6000 family include EPF6016QC208-2N and EPF6016QC208-2 (208-pin PQFP, identical footprint, different speed grade). The -2N variant adds -40C to +85C industrial temperature range and is functionally identical at room temperature, making it a clean substitution when timing margins allow the slower -3 grade.

Is there a non-Altera (cross-brand) equivalent for the EPF6016QC208-3?

There is no pin-compatible cross-brand replacement for the EPF6016QC208-3 in the same 208-pin PQFP package. Xilinx XC4000-series parts with similar 16K-gate capacity used different pinouts and BGA packages, so they require PCB rework. For new designs the recommended cross-brand path is to migrate to a modern low-density FPGA such as Lattice iCE40 or Microchip PolarFire in a fresh PCB layout.

What is the operating voltage of EPF6016QC208-3?

The EPF6016QC208-3 requires a 5.0V VCCINT supply for the core logic, with VCCIO supporting 3.3V or 5.0V I/O banks for mixed-voltage interfacing. The device does NOT support 1.8V or 1.2V core rails; for low-voltage operation, migrate to a Cyclone III/IV/V FPGA on 1.2V VCCINT.

How do I configure the EPF6016QC208-3?

The EPF6016QC208-3 uses SRAM configuration loaded through the passive-serial (PS) mode from an external EPC1, EPC2, or EPC16 configuration PROM, or directly from a download cable such as Altera ByteBlaster / MasterBlaster / BitBlaster. JTAG (IEEE 1149.1) is also supported for boundary-scan testing and in-system programming. Configuration time is determined by the bitstream size (approximately 60-80 Kbits for a fully utilized EPF6016).

What software supports the EPF6016QC208-3?

The EPF6016QC208-3 is supported by MAX+PLUS II (legacy Altera toolchain) and Quartus II versions up through Quartus II 13.0 sp1. Quartus Prime does not support FLEX 6000 devices; engineers maintaining FLEX 6000 designs must remain on MAX+PLUS II or an archived Quartus II version for synthesis, place-and-route, and timing analysis.

What package does the EPF6016QC208-3 use?

The EPF6016QC208-3 is housed in a 208-pin Plastic Quad Flat Pack (PQFP / QFP-208) with 0.5 mm lead pitch and a body size of approximately 28 mm x 28 mm with a 3.4 mm profile. The Q-suffix in the part number designates PQFP, and the C denotes commercial temperature grade. 171 of the 208 pins are bonded out as user I/Os; remaining pins are supply, ground, JTAG, and configuration.

What are typical applications for the EPF6016QC208-3?

The EPF6016QC208-3 is used in telecom line-card glue logic, industrial control and instrumentation backplanes, PCI and ISA bus bridges, embedded microcontroller co-processors, and asynchronous-transfer-mode (ATM) glue. Its 5.0V tolerance and 208-pin PQFP ease of prototyping make it common in legacy industrial systems, military refresh programs, and ASIC-replacement designs that originally targeted the late 1990s.

エンジニアリング参考データ: EPF6016QC208-3 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the EPF6016QC208-3 when your design is timing-marginal rather than speed-critical, and you want the lowest unit cost in the FLEX 6000 208-pin PQFP family. It is the right pick for glue-logic replacement, legacy ASIC drop-in, and 5.0V-tolerant industrial backplanes where fMAX below 100 MHz is acceptable. Choose EPF6016QC208-2 if you need higher fMAX in the same footprint, or EPF6016QC208-2N if you also need industrial -40 C to +85 C operation. Migrate to a Cyclone IV/V or MAX 10 CPLD for new designs, since the FLEX 6000 family is obsolete. The 208-pin PQFP package remains the best choice for hand-prototyping and field-rework scenarios where BGA is impractical.

代替品との比較

パラメータ	この製品	EPF6016QC208-2	EPF6016QC208-2N	EPF6016AQC208-3	EPF6016AQC208-3N
Brand	Altera	Altera	Altera	Altera	Altera
Package	PQFP-208	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same
Logic Elements	1,320	1,320 (same die)	1,320 (same die)	1,320 (same die)	1,320 (same die)
LABs	132	132	132	132	132
User I/Os	171	171	171	171	171
Speed Grade	-3 (slowest)	-2 (faster fMAX)	-2 + industrial temp	-3 (same speed, A-grade die)	-3 (same speed, A-grade + industrial)
Operating Temperature	0 C to +85 C (commercial)	0 C to +85 C	-40 C to +85 C (industrial)	0 C to +85 C	-40 C to +85 C (industrial)
Supply Voltage VCCINT	5.0 V	5.0 V	5.0 V	5.0 V	5.0 V
Lifecycle Status	Obsolete	Obsolete	Obsolete	Obsolete	Obsolete

主な差別化要因

Lowest cost FLEX 6000 speed grade in PQFP-208 （vs EPF6016QC208-2)
Industrial temperature variant available in same footprint （vs EPF6016QC208-2N)
Same die across PQFP and BGA package options （vs EPF6016BC256-3)

設計ノート

Estimated: at VCCINT = 5.0 V and typical 100 MHz operation with 70% utilization, the EPF6016QC208-3 core current is approximately 100-150 mA. Place 0.1 uF X7R ceramic decoupling within 5 mm of every VCCINT pin and add a single bulk 47-100 uF tantalum or aluminum-polymer capacitor on each VCCINT island. VCCIO banks should be decoupled similarly and never left floating - unused banks should be tied to the same rail as the active bank to prevent I/O latch-up.

PQFP-208 has 0.5 mm lead pitch - keep-out clearance of 0.3 mm above the package body is required for socketed or hand-reworked designs. Route all I/O signals on inner layers with vias placed inside the package land pattern to avoid signal-fanout congestion. Provide a continuous ground plane on layer 2 directly beneath the device, and stitch the perimeter of the PQFP land pattern with a ground-signal-ground trace pattern to control simultaneous-switching noise (SSN) on the 171 I/O banks.

Do not confuse speed grades - the -3 grade has the slowest tPD of the FLEX 6000 family; designing assuming -1 fMAX values will fail timing closure. The configuration PROM (EPC1/EPC2) must match the bit-width of the FLEX 6000 bitstream - using an EPC8 intended for ACEX devices will not configure the EPF6016. Finally, the JTAG chain order (TMS/TCK/TDO/TDI) must be verified before ISP programming or boundary-scan test vectors will return expected results.

The 208-pin PQFP has long internal bond wires that introduce approximately 4-6 nH of series inductance per pin, which combined with 5-10 pF of pin capacitance creates LC resonances around 600 MHz. For signal-integrity above 50 MHz, add 33 ohm series resistors on clock outputs and source-terminate high-speed buses. The PQFP-208 body is approximately 28 mm x 28 mm with 3.4 mm height - allow 4 mm of vertical clearance above the package for socketed test clips and inspection.

コンプライアンス情報

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

鉛フリー

Unknown

ハロゲンフリー

Unknown

紛争鉱物

Unknown

RoHS/REACH status not present in verified web data; EPF6016QC208-3 pre-dates RoHS Phase 2 transition (the FLEX 6000 family launched in 1998). AEC-Q100 not applicable - this is a commercial-grade FPGA. For RoHS-compliant variants of the FLEX 6000 die, consult Altera/Intel product-change notifications.

データ検証日: 2026-09-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

出典: Manufacturer Datasheet, Distributor, Octopart, Distributor, Distributor, Distributor, Octopart