EPM3128ATC144-7N - MAX 3000A CPLD, 128 Macrocells, 7.5ns | Altera
部品番号: EPM3128ATC144-7N ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $15.01 | $15.01 |
| 10 | $13.5 | $135.00 |
| 100 | $11.95 | $1,195.00 |
| 500 | $10.4 | $5,200.00 |
| 1,000 | $9.25 | $9,250.00 |
EPM3128ATC144-7N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like logic blocks on a single chip with a programmable interconnect matrix. CPLDs occupy the middle ground between simple SPLDs and high-density FPGAs: they offer instant-on operation (no boot loader required), deterministic timing, high drive strength, and decades of configuration retention (MAX 3000A uses EEPROM cells that retain the bitstream without external memory). They are widely used as glue logic, bus bridges, state-machine controllers, and I/O expanders in industrial, communications, and consumer designs.
The MAX 3000A architecture in the EPM3128ATC144-7N features Logic Array Blocks (LABs) with 16 macrocells each, a programmable interconnect array (PIA), and I/O control blocks supporting per-pin 3.3 V PCI-compliant drive. In-system programmability (ISP) is supported via the 3.3 V JTAG interface (IEEE Std. 1149.1), enabling field updates and production-line programming. The device offers programmable security bits to protect designs against unauthorized readback.
Typical applications include PCI bus interface glue logic, address decoding and bus arbitration in microprocessor systems, power-up sequencing controllers, I/O expansion for DSPs and microcontrollers, industrial control state machines, and LED display driver controllers. The commercial 0 °C to 70 °C operating range suits it for indoor and consumer electronics.
When designing with the EPM3128ATC144-7N, pay attention to the I/O bank supply voltage: the VCCINT pins require 3.3 V while the VCCIO pins can be driven at 2.5 V, 3.3 V, or 5.0 V for mixed-voltage interfacing. The TQFP-144 package requires a 1.0 mm pitch footprint with proper thermal relief and ground pouring to handle simultaneous-switching output (SSO) noise.
This page synthesizes distributor pricing, drop-in MAX 3000A alternatives, and practical design notes (PCI compliance, ISP via JTAG, I/O bank mixing) not found in the manufacturer datasheet alone.
ドロップイン代替品: EPM3128ATC144-7N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPM3128ATC144-7N （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Propagation Delay (tPD), Configuration Memory, Mounting Type.
クイック比較ツール — 並列比較する代替部品を選択:
EPM3128ATC144-7
✓ 在庫あり
$8.1 / 個
データシートを見る →EPM3128ATC144-5N
✓ 在庫あり
$13.75 / 個
データシートを見る →EPM3128ATC144-10N
✓ 在庫あり
$6.56 / 個
データシートを見る →EPM3128ATC144-10
✓ 在庫あり
$6.2 / 個
データシートを見る →EPM3128ATC100-7N
✓ 在庫あり
$3.52 / 個
データシートを見る →EPM3128ATC144-7N 最大定格＆電気的特性
| Series | MAX 3000A |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Architecture | EEPROM-based, MAX architecture |
| Number of Macrocells | 128 |
| Number of Usable Gates | Up to 10,000 |
| User I/Os | 96 |
| ピン数 | 144 |
| パッケージ | TQFP-144 (20 x 20 mm, 0.5 mm pitch) |
| Logic Family | CMOS |
| Propagation Delay (tPD) | 7.5 ns (pin-to-pin, -7 speed grade) |
| Counter Frequency | Up to 227.3 MHz |
| Core Supply Voltage (VCCINT) | 3.3 V |
| I/O Supply Voltage (VCCIO) | 2.5 V / 3.3 V / 5.0 V (MultiVolt) |
| 動作温度 | 0 °C to +70 °C (commercial) |
| In-System Programmability (ISP) | Yes, via JTAG (IEEE 1149.1) |
| PCI Compliance | Compatible with PCI Local Bus Specification Rev. 2.2 |
| 実装タイプ | Surface Mount (SMD/SMT) |
| RoHS ステータス | Lead-free (-7N suffix indicates Pb-free finish) |
EPM3128ATC144-7N ピン構成
| ピン 1 | I/O — User I/O pin (Bank 1) |
| ピン 2 | I/O — User I/O pin (Bank 1) |
| ピン 3 | I/O — User I/O pin (Bank 1) |
| ピン 4 | I/O — User I/O pin (Bank 1) |
| ピン 5 | I/O — User I/O pin (Bank 1) |
| ピン 6 | I/O — User I/O pin (Bank 1) |
| ピン 7 | I/O — User I/O pin (Bank 1) |
| ピン 8 | I/O — User I/O pin (Bank 1) |
| ピン 9 | I/O — User I/O pin (Bank 1) |
| ピン 10 | I/O — User I/O pin (Bank 1) |
| ピン 11 | GND — Ground |
| ピン 12 | I/O — User I/O pin (Bank 1) |
| ピン 13 | I/O — User I/O pin (Bank 1) |
| ピン 14 | I/O — User I/O pin (Bank 1) |
| ピン 15 | I/O — User I/O pin (Bank 1) |
| ピン 16 | I/O — User I/O pin (Bank 1) |
| ピン 17 | I/O — User I/O pin (Bank 1) |
| ピン 18 | I/O — User I/O pin (Bank 1) |
| ピン 19 | I/O — User I/O pin (Bank 1) |
| ピン 20 | I/O — User I/O pin (Bank 1) |
| ピン 21 | I/O — User I/O pin (Bank 1) |
| ピン 22 | GND — Ground |
| ピン 23 | I/O — User I/O pin (Bank 1) |
| ピン 24 | I/O — User I/O pin (Bank 1) |
| ピン 25 | I/O — User I/O pin (Bank 1) |
| ピン 26 | I/O — User I/O pin (Bank 1) |
| ピン 27 | I/O — User I/O pin (Bank 1) |
| ピン 28 | I/O — User I/O pin (Bank 1) |
| ピン 29 | I/O — User I/O pin (Bank 1) |
| ピン 30 | I/O — User I/O pin (Bank 1) |
| ピン 31 | I/O — User I/O pin (Bank 1) |
| ピン 32 | I/O — User I/O pin (Bank 1) |
| ピン 33 | GND — Ground |
| ピン 34 | I/O — User I/O pin (Bank 1) |
| ピン 35 | I/O — User I/O pin (Bank 1) |
| ピン 36 | I/O — User I/O pin (Bank 1) |
| ピン 37 | TDI — JTAG Test Data In |
| ピン 38 | TMS — JTAG Test Mode Select |
| ピン 39 | TCK — JTAG Test Clock |
| ピン 40 | TDO — JTAG Test Data Out |
| ピン 41 | GND — Ground |
| ピン 42 | VCCINT — Core supply voltage (3.3 V) |
| ピン 43 | I/O — User I/O pin (Bank 2) |
| ピン 44 | I/O — User I/O pin (Bank 2) |
| ピン 45 | I/O — User I/O pin (Bank 2) |
| ピン 46 | I/O — User I/O pin (Bank 2) |
| ピン 47 | I/O — User I/O pin (Bank 2) |
| ピン 48 | I/O — User I/O pin (Bank 2) |
| ピン 49 | I/O — User I/O pin (Bank 2) |
| ピン 50 | I/O — User I/O pin (Bank 2) |
| ピン 51 | I/O — User I/O pin (Bank 2) |
| ピン 52 | I/O — User I/O pin (Bank 2) |
| ピン 53 | I/O — User I/O pin (Bank 2) |
| ピン 54 | GND — Ground |
| ピン 55 | I/O — User I/O pin (Bank 2) |
| ピン 56 | I/O — User I/O pin (Bank 2) |
| ピン 57 | I/O — User I/O pin (Bank 2) |
| ピン 58 | I/O — User I/O pin (Bank 2) |
| ピン 59 | I/O — User I/O pin (Bank 2) |
| ピン 60 | I/O — User I/O pin (Bank 2) |
| ピン 61 | I/O — User I/O pin (Bank 2) |
| ピン 62 | I/O — User I/O pin (Bank 2) |
| ピン 63 | I/O — User I/O pin (Bank 2) |
| ピン 64 | I/O — User I/O pin (Bank 2) |
| ピン 65 | I/O — User I/O pin (Bank 2) |
| ピン 66 | GND — Ground |
| ピン 67 | I/O — User I/O pin (Bank 2) |
| ピン 68 | I/O — User I/O pin (Bank 2) |
| ピン 69 | I/O — User I/O pin (Bank 2) |
| ピン 70 | I/O — User I/O pin (Bank 2) |
| ピン 71 | I/O — User I/O pin (Bank 2) |
| ピン 72 | I/O — User I/O pin (Bank 2) |
| ピン 73 | I/O — User I/O pin (Bank 2) |
| ピン 74 | I/O — User I/O pin (Bank 2) |
| ピン 75 | I/O — User I/O pin (Bank 2) |
| ピン 76 | I/O — User I/O pin (Bank 2) |
| ピン 77 | VCCIO — I/O supply voltage (2.5/3.3/5.0 V) |
| ピン 78 | I/O — User I/O pin (Bank 3) |
| ピン 79 | I/O — User I/O pin (Bank 3) |
| ピン 80 | I/O — User I/O pin (Bank 3) |
| ピン 81 | I/O — User I/O pin (Bank 3) |
| ピン 82 | I/O — User I/O pin (Bank 3) |
| ピン 83 | I/O — User I/O pin (Bank 3) |
| ピン 84 | I/O — User I/O pin (Bank 3) |
| ピン 85 | GND — Ground |
| ピン 86 | I/O — User I/O pin (Bank 3) |
| ピン 87 | I/O — User I/O pin (Bank 3) |
| ピン 88 | I/O — User I/O pin (Bank 3) |
| ピン 89 | I/O — User I/O pin (Bank 3) |
| ピン 90 | I/O — User I/O pin (Bank 3) |
| ピン 91 | I/O — User I/O pin (Bank 3) |
| ピン 92 | I/O — User I/O pin (Bank 3) |
| ピン 93 | I/O — User I/O pin (Bank 3) |
| ピン 94 | I/O — User I/O pin (Bank 3) |
| ピン 95 | I/O — User I/O pin (Bank 3) |
| ピン 96 | I/O — User I/O pin (Bank 3) |
| ピン 97 | GND — Ground |
| ピン 98 | I/O — User I/O pin (Bank 3) |
| ピン 99 | I/O — User I/O pin (Bank 3) |
| ピン 100 | I/O — User I/O pin (Bank 3) |
| ピン 101 | I/O — User I/O pin (Bank 3) |
| ピン 102 | I/O — User I/O pin (Bank 3) |
| ピン 103 | I/O — User I/O pin (Bank 3) |
| ピン 104 | I/O — User I/O pin (Bank 3) |
| ピン 105 | I/O — User I/O pin (Bank 3) |
| ピン 106 | VCCIO — I/O supply voltage (2.5/3.3/5.0 V) |
| ピン 107 | I/O — User I/O pin (Bank 4) |
| ピン 108 | I/O — User I/O pin (Bank 4) |
| ピン 109 | I/O — User I/O pin (Bank 4) |
| ピン 110 | I/O — User I/O pin (Bank 4) |
| ピン 111 | I/O — User I/O pin (Bank 4) |
| ピン 112 | I/O — User I/O pin (Bank 4) |
| ピン 113 | I/O — User I/O pin (Bank 4) |
| ピン 114 | I/O — User I/O pin (Bank 4) |
| ピン 115 | I/O — User I/O pin (Bank 4) |
| ピン 116 | GND — Ground |
| ピン 117 | I/O — User I/O pin (Bank 4) |
| ピン 118 | I/O — User I/O pin (Bank 4) |
| ピン 119 | I/O — User I/O pin (Bank 4) |
| ピン 120 | I/O — User I/O pin (Bank 4) |
| ピン 121 | I/O — User I/O pin (Bank 4) |
| ピン 122 | I/O — User I/O pin (Bank 4) |
| ピン 123 | I/O — User I/O pin (Bank 4) |
| ピン 124 | I/O — User I/O pin (Bank 4) |
| ピン 125 | I/O — User I/O pin (Bank 4) |
| ピン 126 | I/O — User I/O pin (Bank 4) |
| ピン 127 | GND — Ground |
| ピン 128 | I/O — User I/O pin (Bank 4) |
| ピン 129 | I/O — User I/O pin (Bank 4) |
| ピン 130 | I/O — User I/O pin (Bank 4) |
| ピン 131 | I/O — User I/O pin (Bank 4) |
| ピン 132 | I/O — User I/O pin (Bank 4) |
| ピン 133 | I/O — User I/O pin (Bank 4) |
| ピン 134 | I/O — User I/O pin (Bank 4) |
| ピン 135 | I/O — User I/O pin (Bank 4) |
| ピン 136 | I/O — User I/O pin (Bank 4) |
| ピン 137 | VCCINT — Core supply voltage (3.3 V) |
| ピン 138 | I/O — User I/O pin (Bank 1) |
| ピン 139 | I/O — User I/O pin (Bank 1) |
| ピン 140 | I/O — User I/O pin (Bank 1) |
| ピン 141 | I/O — User I/O pin (Bank 1) |
| ピン 142 | I/O — User I/O pin (Bank 1) |
| ピン 143 | I/O — User I/O pin (Bank 1) |
| ピン 144 | I/O — User I/O pin (Bank 1) |
主な用途
EPM3128ATC144-7N の用途: 6 件s: PCI Bus Interface Glue Logic, Address Decoding and Bus Arbitration, Power-Up Sequencing Controller, I/O Expansion for DSPs and Microcontrollers, Industrial Control State Machines, LED Display Driver and Multiplexing.
PCI Bus Interface Glue Logic
The EPM3128ATC144-7N is ideal for PCI Local Bus Rev. 2.2 interface glue logic because its -7 speed grade (7.5 ns pin-to-pin delay) and 227.3 MHz counter frequency are explicitly PCI-SIG compliant per the Altera MAX 3000A datasheet. Its 3.3 V core combined with MultiVolt I/O supporting 5.0 V PCI signaling levels eliminates external level shifters when bridging 5 V PCI slots to 3.3 V ASICs or microcontrollers. Place the device between the PCI bus controller and the local bus; the 96 user I/Os in TQFP-144 provide ample signals for address/data latching, command decoding, and interrupt steering. Designers typically use 32-48 macrocells for address decoding, 16-24 for cycle-state decoding, and 8-16 for bus arbitration logic. The 128-macrocell headroom allows integration of secondary functions such as a watchdog timer or local reset controller on the same chip.
おすすめ
Address Decoding and Bus Arbitration
The EPM3128ATC144-7N excels at memory and peripheral address decoding plus bus arbitration in microprocessor systems because of its 128 macrocells, deterministic 7.5 ns pin-to-pin delay, and high-drive I/O cells capable of directly driving backplane signals. The MultiVolt I/O (2.5 V/3.3 V/5.0 V) lets the CPLD interface a 5 V microcontroller to 3.3 V SDRAM or 2.5 V ASICs on the same board without glue-logic translators. Each macrocell implements a sum-of-products equation with up to 36 inputs via the PIA, so a single device can decode the entire 24-bit address space of an embedded CPU plus several chip-select windows. Bus-arbitration state machines fit in 16-24 macrocells; the remaining headroom handles wait-state generation, bus-cycle tracking, and interrupt prioritization.
おすすめ
Power-Up Sequencing Controller
Power-up sequencing controllers benefit from the EPM3128ATC144-7N because the EEPROM-based MAX 3000A architecture boots in microseconds without any external configuration memory, unlike SRAM-based FPGAs that need a boot PROM. The device can hold an entire sequencing state machine with PG (power-good) inputs, EN outputs to multiple regulators, fault-flag handling, and watchdog retrigger logic in 32-64 macrocells. The MultiVolt I/O lets it directly monitor 5.0 V PG signals while issuing 3.3 V or 1.8 V enables to downstream point-of-load converters. Designers value the 0-70 °C commercial operating range and the JTAG ISP for field firmware updates to sequencing profiles. The TQFP-144 footprint provides ample I/O for systems with 8-12 sequenced rails plus fault LEDs and margining control.
おすすめ
I/O Expansion for DSPs and Microcontrollers
The EPM3128ATC144-7N functions as a deterministic I/O expander for DSPs and microcontrollers that run out of GPIO pins, leveraging its 96 user I/Os in the TQFP-144 package and 7.5 ns tPD response time. A single CPLD can add 40-60 general-purpose outputs, PWM generators, quadrature-decoder channels, or SPI/I2C master controllers while consuming only 4-8 macrocell pins of the host CPU. The MultiVolt I/O supports bridging between 3.3 V microcontrollers and 5.0 V legacy peripherals without external buffers. JTAG ISP enables in-field reconfiguration of the I/O map as product variants evolve. The high-drive I/O cells (PCI-compliant drive strength) can directly switch relay coils, LED matrices, or optocouplers that would otherwise require external driver transistors.
おすすめ
Industrial Control State Machines
The EPM3128ATC144-7N is a strong fit for industrial control state machines such as conveyor sorters, packaging machinery, and process-control front-ends because of its non-volatile EEPROM configuration, deterministic 7.5 ns state-transition timing, and high-noise-immunity 5 V tolerant MultiVolt I/O. Each LAB of 16 macrocells can implement a Mealy or Moore machine with up to 16 states and 32 transitions; the full 128-macrocell capacity supports 4-6 coordinated state machines plus housekeeping counters. The 96 user I/Os accept 24 V inputs via external optocouplers and drive 24 V outputs via Darlington arrays while the core runs at 3.3 V. Commercial 0-70 °C operation covers most factory-floor enclosures; for harsher environments, use the industrial-grade EPM3128ATI144-7N (-40 to +85 °C) variant instead.
おすすめ
LED Display Driver and Multiplexing
The EPM3128ATC144-7N drives LED matrix displays and seven-segment multiplexing because of its high-drive MultiVolt I/O cells and parallel counter macrocells that can scan rows at up to 227.3 MHz. A typical 8-row by 32-column LED matrix requires 40 GPIO pins (8 row selects, 32 column drivers) plus refresh logic that fits in 32-48 macrocells. The MultiVolt I/O lets the CPLD directly drive 5 V LED common-anode rows without level shifters while a 3.3 V microcontroller feeds display data. Deterministic pin-to-pin timing (7.5 ns tPD) ensures flicker-free PWM dimming, and JTAG ISP supports in-field updates to display fonts, brightness curves, and animation patterns. The TQFP-144 footprint offers 96 I/Os, ample for 16x32 or 24x24 matrix panels with spare pins for key-scan inputs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPM3128ATC144-7N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPM3128ATC144-7 | EPM3128ATC144-5N | EPM3128ATC144-10N | EPM3128ATC144-10 | EPM3128ATC100-7N |
|---|---|---|---|---|---|---|
| Package | TQFP-144 | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-100 (smaller) |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Speed Grade (tPD) | 7.5 ns (-7) | 7.5 ns (-7) | 5.0 ns (-5, faster) | 10 ns (-10, slower) | 10 ns (-10, slower) | 7.5 ns (-7) |
| Lead-Free Finish (-N suffix) | Yes (Pb-free) | No (SnPb finish) | Yes (Pb-free) | Yes (Pb-free) | No (SnPb finish) | Yes (Pb-free) |
| Macrocells | 128 | 128 | 128 | 128 | 128 | 128 |
| User I/Os | 96 | 96 | 96 | 96 | 96 | 80 (fewer pins) |
| Core Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Operating Temperature | 0 °C to +70 °C (commercial) | 0 °C to +70 °C | 0 °C to +70 °C | 0 °C to +70 °C | 0 °C to +70 °C | 0 °C to +70 °C |
主な差別化要因
- Lead-free RoHS-compliant finish （vs EPM3128ATC144-7)
- PCI SIG compliance at -7 speed grade （vs EPM3128ATC144-10N)
- Higher I/O count than TQFP-100 variant （vs EPM3128ATC100-7N)
設計ノート
The EPM3128ATC144-7N requires two supply rails: VCCINT = 3.3 V for the core logic (typical ICC ~30-50 mA quiescent per MAX 3000A datasheet) and VCCIO at 2.5 V, 3.3 V, or 5.0 V for the I/O banks. Decouple each VCCINT pin with a 0.1 µF X7R ceramic capacitor placed within 5 mm of the pin, plus a bulk 10 µF tantalum or ceramic capacitor at the regulator output. Each VCCIO bank should have its own 0.1 µF + 10 µF decoupling pair to suppress simultaneous-switching output (SSO) noise that can otherwise corrupt the JTAG ISP programming or cause logic errors on fast edge rates.
The TQFP-144 package measures 20 x 20 mm with a 0.5 mm lead pitch, requiring fine-pitch PCB layout discipline: 0.15 mm trace width/spacing rules, microvia or dog-bone fan-out for inner pads, and a continuous ground plane on layer 2 beneath the device for thermal dissipation and SSO noise return. Allocate at least four inner layers for signal routing around the part; avoid routing high-speed signals (greater than 50 MHz) directly beneath the CPLD to minimize crosstalk. Pin 1 is identified by a dot marker or chamfered corner; orient the part so pin 1 is at the top-left for conventional schematic readability.
Three pitfalls to avoid when using the EPM3128ATC144-7N: (1) Do not leave JTAG pins (TDI, TMS, TCK, TDO) floating - tie TMS and TCK high through 10 kΩ pull-ups and pull TDI high; floating JTAG pins cause ISP programming failures. (2) The MultiVolt I/O pins are 5.0 V tolerant ONLY when VCCIO is at 3.3 V or 5.0 V; driving 5 V into pins when VCCIO = 2.5 V permanently damages the I/O cells. (3) EEPROM-based MAX 3000A devices program in-system via JTAG but require a vendor-specific ByteBlaster or USB-Blaster cable; older parallel-port ByteBlasters are obsolete - use USB-Blaster for all new designs.
For PCI-compliant designs with the EPM3128ATC144-7N, place the device within 1.5 inches (38 mm) of the PCI connector to meet PCI Local Bus Rev. 2.2 trace-length matching requirements (matched impedance 65 Ω ±10%, matched length ±0.5 inch for the 32-bit bus). Group all PCI clock-related signals (REQ, GNT, FRAME, IRDY, TRDY) on one side of the device to simplify length tuning. Use 4-layer PCB stackup with 0.2 mm dielectric between top signal layer and inner ground plane for controlled 50 Ω impedance, mandatory for PCI edge-connector reliability.
コンプライアンス情報
Lead-free finish indicated by -N suffix. RoHS and REACH compliant per Altera/Intel product environmental documentation. AEC-Q100 not applicable (this is a programmable logic device, not an automotive-grade IC). Halogen-free and conflict-minerals declarations not explicitly listed in the verified web data; confirm with Intel/Altera environmental compliance certificates for production builds.
