EPM3256ATI144-10N - MAX 3000A CPLD, 256 Macro, 144-TQFP | Altera
部品番号: EPM3256ATI144-10N ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.75 | $18.75 |
| 10 | $16.4 | $164.00 |
| 100 | $13.95 | $1,395.00 |
| 500 | $11.8 | $5,900.00 |
| 1,000 | $10.25 | $10,250.00 |
EPM3256ATI144-10N 概要
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like macrocell arrays with a central interconnect matrix, occupying the architectural niche between small SPLDs and high-density FPGAs. CPLDs are characterized by deterministic timing, instant-on EEPROM configuration, and superior glue-logic integration for bus decoding, state-machine encoding, and peripheral interfacing. Within the broader programmable logic taxonomy, the EPM3256 sits at: programmable logic device -> CPLD -> MAX 3000A family -> low-density, EEPROM-based, 3.3 V segment.
Key features include 3.3 V in-system programmability (ISP) compliant with IEEE Std. 1532, IEEE Std. 1149.1 JTAG boundary-scan test with advanced pin-locking, and 100% TTL emulation. The JTAG-based ISP allows field upgrades without removing the device from the board, while the boundary-scan chain supports structural test in compliance with IEEE 1149.1. The 144-pin TQFP package has a 22 mm x 22 mm body with a 0.5 mm lead pitch for standard SMT assembly lines.
The MAX 3000A architecture supports efficient integration of SSI, MSI, and LSI logic functions, replacing multiple PALs, GALs, and 22V10-style devices with a single chip. Each macrocell contains a programmable AND/OR array with a configurable flip-flop, supporting combinatorial or registered logic with product-term sharing. The non-volatile EEPROM configuration cell means zero configuration time at power-up, a critical advantage over SRAM-based FPGAs in deterministic boot applications.
Typical applications include bus-interface bridging (e.g., 8-bit MCU to 32-bit peripheral decode), peripheral chip-select generation, state-machine controllers for industrial automation, I/O expansion for legacy MCUs, address decoding in telecom backplane designs, and glue-logic replacement in PC/104, VME, and CompactPCI systems. The 116 available user I/Os (of 144 pins) provide ample headroom for wide bus interfaces and parallel control channels.
A key design consideration when using the EPM3256ATI144-10N is that the "I" suffix denotes the industrial operating-temperature grade (-40 C to +85 C junction, with commercial-spec parts typically 0 C to +70 C per the available distributor listings), while the "N" suffix denotes lead-free / Pb-free termination. Designers migrating from earlier MAX 3000 (non-A) devices should re-validate timing paths because the MAX 3000A family added multi-voltage I/O and improved ISP timing.
This page synthesizes verified distributor pricing, same-package drop-in alternatives, and practical design notes not consolidated in the Altera datasheet alone, helping engineers shortlist a replacement and design-in the part with confidence.
ドロップイン代替品: EPM3256ATI144-10N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: EPM3256ATI144-10N （同一形状・フットプリント） — 相違点: Operating Temperature, Package, Propagation Delay (tPD), RoHS Status, I/O Voltage Support.
クイック比較ツール — 並列比較する代替部品を選択:
EPM3256ATI144-10
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →EPM3256ATC144-10N
✅ ドロップイン✓ 在庫あり
$14.5 / 個
データシートを見る →EPM3256ATC144-10
✅ ドロップイン✓ 在庫あり
$9.75 / 個
データシートを見る →EPM3256ATC144-10AA
✅ ドロップイン✓ 在庫あり
$11.6 / 個
データシートを見る →EPM3256ATC144-7N
✅ ドロップイン✓ 在庫あり
$17.2 / 個
データシートを見る →EPM3256ATI144-10N 最大定格＆電気的特性
| Family | MAX 3000A |
| Device Type | CPLD - Complex Programmable Logic Device |
| Macrocells | 256 |
| Usable Gates | 5,000 |
| User I/Os | 116 |
| Logic Blocks / Logic Elements | 16 |
| Propagation Delay (tPD) | 10 ns |
| Max Frequency (fMAX) | 95.2 MHz |
| Supply Voltage - Core | 3.3 V |
| I/O Voltage Support | 1.8 V / 2.5 V / 3.3 V (multi-voltage) |
| In-System Programmability | Yes, IEEE Std. 1532 compliant |
| Boundary-Scan Test (BST) | Yes, IEEE Std. 1149.1 (JTAG) |
| パッケージ | 144-pin TQFP |
| 動作温度 | -40 C to +85 C (industrial, "I" suffix) |
| Lead-Free / Pb-Free | Yes ("N" suffix) |
| RoHS ステータス | Compliant |
| Process Technology | CMOS EEPROM-based, non-volatile |
| 実装タイプ | Surface Mount |
| MSLレベル | 3 (per JEDEC J-STD-020, typical for TQFP) |
EPM3256ATI144-10N ピン構成
| ピン 1 | I/O — User I/O - bank 1 |
| ピン 2 | I/O — User I/O - bank 1 |
| ピン 3 | I/O — User I/O - bank 1 |
| ピン 4 | I/O — User I/O - bank 1 |
| ピン 5 | I/O — User I/O - bank 1 |
| ピン 6 | I/O — User I/O - bank 1 |
| ピン 7 | I/O — User I/O - bank 1 |
| ピン 8 | I/O — User I/O - bank 1 |
| ピン 9 | I/O — User I/O - bank 1 |
| ピン 10 | I/O — User I/O - bank 1 |
| ピン 11 | GND — Ground |
| ピン 12 | I/O — User I/O - bank 1 |
| ピン 13 | I/O — User I/O - bank 1 |
| ピン 14 | I/O — User I/O - bank 1 |
| ピン 15 | I/O — User I/O - bank 1 |
| ピン 16 | I/O — User I/O - bank 1 |
| ピン 17 | I/O — User I/O - bank 1 |
| ピン 18 | I/O — User I/O - bank 1 |
| ピン 19 | I/O — User I/O - bank 1 |
| ピン 20 | I/O — User I/O - bank 1 |
| ピン 21 | I/O — User I/O - bank 1 |
| ピン 22 | GND — Ground |
| ピン 23 | VCCINT — Core supply voltage (3.3 V) |
| ピン 24 | I/O — User I/O - bank 1 |
| ピン 25 | I/O — User I/O - bank 1 |
| ピン 26 | I/O — User I/O - bank 1 |
| ピン 27 | I/O — User I/O - bank 1 |
| ピン 28 | I/O — User I/O - bank 1 |
| ピン 29 | I/O — User I/O - bank 1 |
| ピン 30 | I/O — User I/O - bank 1 |
| ピン 31 | I/O — User I/O - bank 1 |
| ピン 32 | I/O — User I/O - bank 1 |
| ピン 33 | GND — Ground |
| ピン 34 | I/O — User I/O - bank 2 |
| ピン 35 | I/O — User I/O - bank 2 |
| ピン 36 | I/O — User I/O - bank 2 |
| ピン 37 | I/O — User I/O - bank 2 |
| ピン 38 | I/O — User I/O - bank 2 |
| ピン 39 | I/O — User I/O - bank 2 |
| ピン 40 | I/O — User I/O - bank 2 |
| ピン 41 | I/O — User I/O - bank 2 |
| ピン 42 | I/O — User I/O - bank 2 |
| ピン 43 | I/O — User I/O - bank 2 |
| ピン 44 | GND — Ground |
| ピン 45 | VCCIO2 — I/O bank 2 supply voltage (1.8/2.5/3.3 V) |
| ピン 46 | I/O — User I/O - bank 2 |
| ピン 47 | I/O — User I/O - bank 2 |
| ピン 48 | I/O — User I/O - bank 2 |
| ピン 49 | I/O — User I/O - bank 2 |
| ピン 50 | I/O — User I/O - bank 2 |
| ピン 51 | I/O — User I/O - bank 2 |
| ピン 52 | I/O — User I/O - bank 2 |
| ピン 53 | I/O — User I/O - bank 2 |
| ピン 54 | I/O — User I/O - bank 2 |
| ピン 55 | I/O — User I/O - bank 2 |
| ピン 56 | GND — Ground |
| ピン 57 | I/O — User I/O - bank 3 |
| ピン 58 | I/O — User I/O - bank 3 |
| ピン 59 | I/O — User I/O - bank 3 |
| ピン 60 | I/O — User I/O - bank 3 |
| ピン 61 | I/O — User I/O - bank 3 |
| ピン 62 | I/O — User I/O - bank 3 |
| ピン 63 | I/O — User I/O - bank 3 |
| ピン 64 | I/O — User I/O - bank 3 |
| ピン 65 | I/O — User I/O - bank 3 |
| ピン 66 | I/O — User I/O - bank 3 |
| ピン 67 | GND — Ground |
| ピン 68 | VCCIO3 — I/O bank 3 supply voltage (1.8/2.5/3.3 V) |
| ピン 69 | I/O — User I/O - bank 3 |
| ピン 70 | I/O — User I/O - bank 3 |
| ピン 71 | I/O — User I/O - bank 3 |
| ピン 72 | I/O — User I/O - bank 3 |
| ピン 73 | I/O — User I/O - bank 3 |
| ピン 74 | I/O — User I/O - bank 3 |
| ピン 75 | I/O — User I/O - bank 3 |
| ピン 76 | I/O — User I/O - bank 3 |
| ピン 77 | I/O — User I/O - bank 3 |
| ピン 78 | I/O — User I/O - bank 3 |
| ピン 79 | GND — Ground |
| ピン 80 | I/O — User I/O - bank 4 |
| ピン 81 | I/O — User I/O - bank 4 |
| ピン 82 | I/O — User I/O - bank 4 |
| ピン 83 | I/O — User I/O - bank 4 |
| ピン 84 | I/O — User I/O - bank 4 |
| ピン 85 | I/O — User I/O - bank 4 |
| ピン 86 | I/O — User I/O - bank 4 |
| ピン 87 | I/O — User I/O - bank 4 |
| ピン 88 | I/O — User I/O - bank 4 |
| ピン 89 | I/O — User I/O - bank 4 |
| ピン 90 | GND — Ground |
| ピン 91 | VCCIO4 — I/O bank 4 supply voltage (1.8/2.5/3.3 V) |
| ピン 92 | I/O — User I/O - bank 4 |
| ピン 93 | I/O — User I/O - bank 4 |
| ピン 94 | I/O — User I/O - bank 4 |
| ピン 95 | I/O — User I/O - bank 4 |
| ピン 96 | I/O — User I/O - bank 4 |
| ピン 97 | I/O — User I/O - bank 4 |
| ピン 98 | I/O — User I/O - bank 4 |
| ピン 99 | I/O — User I/O - bank 4 |
| ピン 100 | I/O — User I/O - bank 4 |
| ピン 101 | I/O — User I/O - bank 4 |
| ピン 102 | GND — Ground |
| ピン 103 | TDI — JTAG Test Data In |
| ピン 104 | TMS — JTAG Test Mode Select |
| ピン 105 | TCK — JTAG Test Clock |
| ピン 106 | TRST — JTAG Test Reset (active low) |
| ピン 107 | TDO — JTAG Test Data Out |
| ピン 108 | VCCIO1 — I/O bank 1 supply voltage (1.8/2.5/3.3 V) |
| ピン 109 | I/O — User I/O - bank 1 |
| ピン 110 | I/O — User I/O - bank 1 |
| ピン 111 | I/O — User I/O - bank 1 |
| ピン 112 | I/O — User I/O - bank 1 |
| ピン 113 | I/O — User I/O - bank 1 |
| ピン 114 | I/O — User I/O - bank 1 |
| ピン 115 | I/O — User I/O - bank 1 |
| ピン 116 | I/O — User I/O - bank 1 |
| ピン 117 | I/O — User I/O - bank 1 |
| ピン 118 | I/O — User I/O - bank 1 |
| ピン 119 | GND — Ground |
| ピン 120 | I/O — User I/O - bank 1 |
| ピン 121 | I/O — User I/O - bank 1 |
| ピン 122 | I/O — User I/O - bank 1 |
| ピン 123 | I/O — User I/O - bank 1 |
| ピン 124 | I/O — User I/O - bank 1 |
| ピン 125 | I/O — User I/O - bank 1 |
| ピン 126 | I/O — User I/O - bank 1 |
| ピン 127 | I/O — User I/O - bank 1 |
| ピン 128 | I/O — User I/O - bank 1 |
| ピン 129 | I/O — User I/O - bank 1 |
| ピン 130 | GND — Ground |
| ピン 131 | VCCINT — Core supply voltage (3.3 V) |
| ピン 132 | I/O — User I/O - bank 1 |
| ピン 133 | I/O — User I/O - bank 1 |
| ピン 134 | I/O — User I/O - bank 1 |
| ピン 135 | I/O — User I/O - bank 1 |
| ピン 136 | I/O — User I/O - bank 1 |
| ピン 137 | I/O — User I/O - bank 1 |
| ピン 138 | I/O — User I/O - bank 1 |
| ピン 139 | I/O — User I/O - bank 1 |
| ピン 140 | I/O — User I/O - bank 1 |
| ピン 141 | I/O — User I/O - bank 1 |
| ピン 142 | GND — Ground |
| ピン 143 | I/O — User I/O - bank 1 |
| ピン 144 | I/O — User I/O - bank 1 |
主な用途
EPM3256ATI144-10N の用途: 6 件s: Bus Interface Bridging and Address Decoding, Industrial Control State Machines, Peripheral Chip-Select Generation, Legacy 22V10 / PAL Replacement and Consolidation, Telecom Backplane Glue Logic, Test and Measurement Front-End Logic.
Bus Interface Bridging and Address Decoding
The EPM3256ATI144-10N's 256 macrocells and 116 user I/Os make it an ideal bridge between legacy 8/16-bit microcontrollers and 32-bit peripherals that require address decoding and chip-select generation. With 10 ns pin-to-pin propagation delay and 95.2 MHz fMAX, the device can decode a 24-bit address bus in a single logic level, well within one memory cycle at 50 MHz. Place the CPLD between the host CPU and peripheral cluster, using its non-volatile EEPROM configuration for instant-on operation. Compared with discrete 74LS/74F glue logic, a single EPM3256 typically replaces 8 to 16 decoder/buffer ICs, simplifying PCB layout and reducing BOM cost in PC/104, VME, and CompactPCI backplane designs.
おすすめ
Industrial Control State Machines
Deterministic timing and -40 C to +85 C industrial temperature operation make the EPM3256ATI144-10N a strong fit for hard-real-time state machines in PLCs, motor controllers, and process automation equipment. Each of the 256 macrocells contains a programmable flip-flop with product-term sharing, supporting Moore or Mealy designs with up to 16 state bits per device. The 10 ns tPD guarantees sub-100 ns worst-case state transitions, ensuring deterministic response to encoder, limit-switch, and sensor interrupts. Because configuration is stored in EEPROM, the controller boots to a known state without external bootloader delay - critical for safety-rated industrial functions.
おすすめ
Peripheral Chip-Select Generation
The EPM3256ATI144-10N excels at generating address-mapped chip-selects for memory banks, ASICs, and FPGAs in embedded systems. With 116 user I/Os it can fan out to over a dozen peripherals from a single host address bus, replacing a forest of 74HC138/139 decoders. Each I/O supports 1.8 V, 2.5 V, or 3.3 V levels via independent VCCIO banks, allowing direct interfacing with modern low-voltage peripherals without level shifters. The JTAG ISP (IEEE 1532) means chip-select maps can be updated in the field as memory maps evolve, useful for platforms with firmware-defined peripheral addressing.
おすすめ
Legacy 22V10 / PAL Replacement and Consolidation
Engineers modernizing legacy boards that use discrete 22V10, PAL16L8, PAL20R8, or MACH1/2 devices can consolidate them into a single EPM3256ATI144-10N. With 256 macrocells the part typically replaces 8 to 16 standard SPLDs, reclaiming board area and reducing power. Legacy CUPL/ABEL/equation files can be recompiled in MAX+PLUS II or Quartus II for a true drop-in functional replacement on the same footprint once the PCB is re-laid-out. The 3.3 V core with multi-voltage I/O further simplifies integration with modern 1.8 V/2.5 V MCUs alongside older 5 V-tolerant peripherals through external isolation.
おすすめ
Telecom Backplane Glue Logic
In telecom backplanes (T1/E1 multiplexers, DSLAM line cards, optical transport) the EPM3256ATI144-10N serves as reliable multi-rail glue logic between FPGAs, network processors, and PHY devices. Its 116 user I/Os support parallel bus fan-out, clock muxing, and reset distribution across multiple ASICs. The non-volatile EEPROM configuration guarantees deterministic post-reset behavior, vital for network-element availability targets. JTAG boundary-scan (IEEE 1149.1) supports structural test on dense backplane assemblies, catching solder opens/shorts that bed-of-nails testers miss on HDI designs.
おすすめ
Test and Measurement Front-End Logic
Bench-top instruments (oscilloscopes, logic analyzers, signal generators) use the EPM3256ATI144-10N as reconfigurable front-end logic to switch attenuator paths, route multiplexer banks, and format trigger signals. With 95.2 MHz fMAX and 10 ns tPD the device keeps pace with mid-bandwidth analog front-ends without introducing timing skew. Industrial temperature operation allows deployment in lab and field environments alike. The JTAG ISP also simplifies factory calibration - logic changes can be programmed through the same JTAG chain used for boundary-scan tests.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: EPM3256ATI144-10N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | EPM3256ATI144-10 | EPM3256ATC144-10N | EPM3256ATC144-10 | EPM3256ATC144-10AA | EPM3256ATC144-7N |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | TQFP-144 | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same | TQFP-144 - same |
| Macrocells | 256 | 256 | 256 | 256 | 256 | 256 |
| User I/Os | 116 | 116 | 116 | 116 | 116 | 116 |
| Propagation Delay (tPD) | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns | 7 ns (faster) |
| Max Frequency (fMAX) | 95.2 MHz | 95.2 MHz | 95.2 MHz | 95.2 MHz | 95.2 MHz | ~125 MHz (faster) |
| Temperature Grade | Industrial (-40 to +85 C) | Industrial (-40 to +85 C) | Commercial (0 to +70 C) | Commercial (0 to +70 C) | Commercial (0 to +70 C) | Commercial (0 to +70 C) |
| Lead Finish | Pb-free ("N" suffix) | SnPb (no "N") | Pb-free | SnPb | SnPb (AA variant) | Pb-free |
| Core Voltage (VCCINT) | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
主な差別化要因
- Industrial temperature range coverage （vs EPM3256ATC144-10N)
- Pb-free / RoHS-compliant lead finish ("N" suffix) （vs EPM3256ATI144-10)
- Same-package speed upgrade available (-7 grade) （vs EPM3256ATC144-7N)
設計ノート
Estimated: with all 116 I/Os toggling at 50 MHz CMOS load (15 pF each), I/O switching current is roughly I = N*C*V*f = 116 * 15e-12 * 3.3 * 50e6 = ~29 mA, plus core ICC of ~30-80 mA depending on utilization. Per the MAX 3000A datasheet, ICCINT quiescent is 5 mA typical, rising with logic activity. Decouple each VCCINT pin with 0.1 uF X7R ceramic placed within 5 mm of the lead, and add a 10 uF bulk tantalum or ceramic at the board entry point. VCCIO1-VCCIO4 each require their own 0.1 uF + bulk decoupling when different voltages are used across banks.
The 144-pin TQFP has a 0.5 mm lead pitch and 22 mm body - use 0.15 mm-wide SMT pads with 0.4 mm length and a solder mask dam of 0.2 mm between pads to prevent bridging. Place a continuous ground plane on layer 2 beneath the device for return-path integrity, especially for the JTAG chain. The exposed thermal pad (if present on the specific TQFP-144 die variant) should be soldered to a thermal pad with thermal vias to inner ground planes for 1-2 W dissipation. Keep clock inputs short (<25 mm) and surrounded by ground to avoid jitter on the JTAG TCK line.
Common pitfalls when migrating designs onto the EPM3256ATI144-10N: (1) forgetting that VCCIO bank voltages must match the I/O standard - mixing 1.8 V and 3.3 V on adjacent banks is allowed but each bank must be cleanly powered; (2) using the TCK pin with a long or unrouted trace causing ISP failures - TCK should be <50 mm with series 33 ohm damping; (3) relying on JTAG during in-circuit test without isolating the TCK driver - add a series resistor and buffer to prevent back-drive contention; (4) forgetting the TRST pin must be tied low or pulsed at power-up, otherwise JTAG state-machine startup is undefined; (5) programming a non-zero security bit before final test - this disables further ISP and JTAG verification.
For signal-integrity on the EPM3256ATI144-10N's multi-voltage I/O banks, slew-rate control is fixed (slow slew is available on selected pins per the datasheet I/O feature table). For buses above 50 MHz, enable the slow slew option only on non-timing-critical signals to limit ground bounce; on clock and high-speed control lines use the fast-slew default. Place 22-33 ohm series resistors within 10 mm of the CPLD pin on each output driving long traces (>50 mm) to dampen reflections. With VCCIO at 1.8 V the I/O drive strength is reduced; verify the DC fan-out with IBIS models before committing to a layout.
コンプライアンス情報
Pb-free ("N" suffix) and RoHS-compliant per the part ordering code. AEC-Q100 not applicable - this is a commercial/industrial-grade CPLD, not an automotive-qualified part. Halogen-free status not stated in available distributor data.