L7986A - 3A 61V Step-Down Switching Regulator | STMicroelectronics
部品番号: L7986A ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.28 | $228.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.82 | $1,820.00 |
L7986A 概要
A step-down switching regulator, also known as a buck converter, is a type of DC-DC converter that steps down a higher input voltage to a lower output voltage with high efficiency. Unlike linear regulators, which dissipate excess power as heat, switching regulators use an inductor and a switch to transfer energy in discrete packets, achieving efficiencies often above 90%. The L7986A belongs to the family of power management ICs, specifically DC-DC converters, which are essential in systems requiring voltage conversion with minimal power loss.
Key features of the L7986A include a 250kHz fixed switching frequency, an internal compensation network, and a power-good (PGOOD) open-drain output for monitoring output voltage status. The device also offers a soft-start function to limit inrush current during startup, and a thermal shutdown protection to prevent damage from overheating. The high input voltage capability of 61V makes it suitable for automotive and industrial applications where the supply rail can experience transients.
The L7986A uses a current-mode control architecture, which provides fast transient response and simplifies loop compensation. The internal high-side MOSFET has a low on-resistance of 250mOhm, reducing conduction losses and improving efficiency at high load currents. The device operates at a fixed 250kHz switching frequency, balancing efficiency and external component size. The HSOP-8 package with exposed pad ensures efficient heat dissipation, allowing the regulator to deliver full 3A output current without additional heatsinking in many applications.
Typical applications include automotive power supplies, industrial control systems, and distributed power architectures. In automotive systems, the wide input range accommodates 12V and 24V battery systems, while the high efficiency reduces thermal stress. In industrial settings, the regulator can step down 48V rails to lower voltages for logic and sensor circuits. The PGOOD output simplifies power sequencing in multi-rail systems.
When designing with the L7986A, ensure proper PCB layout with short, wide traces for high-current paths and adequate copper area for the exposed pad to dissipate heat. The input and output capacitors should be placed close to the IC to minimize parasitic inductance. The soft-start capacitor value determines the startup time and inrush current, which should be selected based on the load requirements.
ドロップイン代替品: L7986A — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: L7986A （同一形状・フットプリント） — 相違点: Input Voltage Range, Operating Temperature Range, Output Voltage Range, Package, Switching Frequency.
クイック比較ツール — 並列比較する代替部品を選択:
L7986ATR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
L7986TR
✅ ドロップイン✓ 在庫あり
$1.85 / 個
データシートを見る →L7987A
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS54360
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LT8610
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
L7986A 最大定格＆電気的特性
| 入力電圧範囲 | 4.5 V to 61 V |
| 出力電圧範囲 | 0.6 V to VIN |
| 最大出力電流 | 3 A |
| スイッチング周波数 | 250 kHz |
| ハイサイドMOSFETオン抵抗 | 250 mOhm |
| 基準電圧 | 0.6 V |
| 静止電流 | 2.5 mA |
| Shutdown Supply Current | 10 uA |
| Soft-Start Time | 1 ms (typical) |
| 熱シャットダウン | Yes |
| 動作温度範囲 | -40C to +150C |
| パッケージ | HSOP-8 |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| PGOOD Output | Open-drain |
L7986A ピン構成
| ピン 1 | SW — Switch node output |
| ピン 2 | GND — Ground |
| ピン 3 | FB — Feedback input |
| ピン 4 | EN — Enable input |
| ピン 5 | PGOOD — Power good output |
| ピン 6 | VCC — Supply voltage |
| ピン 7 | VIN — Input voltage |
| ピン 8 | GND — Ground |
主な用途
L7986A の用途: 6 件s: Automotive Power Supplies, Industrial Control Systems, Distributed Power Architectures, Telecommunication Equipment, LED Lighting Systems, Test and Measurement Equipment.
Automotive Power Supplies
The L7986A is ideal for automotive power supplies due to its wide input voltage range of 4.5V to 61V, which accommodates 12V and 24V battery systems and handles voltage transients. Its high efficiency reduces heat dissipation in the engine compartment. In a typical automotive application, the L7986A steps down the battery voltage to 5V or 3.3V for microcontrollers, sensors, and infotainment systems. The PGOOD output ensures proper power sequencing for safety-critical systems. The device's thermal shutdown protection prevents damage during over-temperature conditions, which is crucial in high-temperature automotive environments.
おすすめ
Industrial Control Systems
In industrial control systems, the L7986A steps down 24V or 48V rails to lower voltages for logic circuits, sensors, and actuators. Its wide input range and high efficiency make it suitable for factory automation and process control. The fixed 250kHz switching frequency allows for a compact design with small external components. The soft-start feature limits inrush current, protecting the input supply and downstream components. The device's operating temperature range of -40C to +150C ensures reliable operation in harsh industrial environments. The PGOOD output can be used to monitor the output voltage and trigger alarms or shutdown sequences if the voltage falls out of regulation.
おすすめ
Distributed Power Architectures
The L7986A is well-suited for distributed power architectures where a central 48V bus is stepped down to various lower voltages at the point of load. Its high input voltage capability and 3A output current make it a versatile building block. In a typical design, the L7986A converts 48V to 12V for intermediate bus, then to 5V or 3.3V for logic. The high efficiency reduces power loss and simplifies thermal management. The device's internal compensation reduces external component count, saving board space. The PGOOD output enables power sequencing in multi-rail systems, ensuring that each rail comes up in the correct order.
おすすめ
Telecommunication Equipment
In telecommunication equipment, the L7986A is used to step down 48V telecom rails to lower voltages for line cards, processors, and communication ICs. Its wide input range and high efficiency are critical for reducing power consumption in data centers and central offices. The device's low quiescent current of 2.5mA helps minimize standby power. The fixed 250kHz switching frequency is compatible with standard EMI filtering techniques, helping to meet EMC regulations. The thermal shutdown protection ensures reliable operation in densely packed equipment racks. The PGOOD output can be used for fault monitoring and system diagnostics.
おすすめ
LED Lighting Systems
The L7986A can be used in LED lighting systems to step down a high input voltage to a constant current or voltage for LED drivers. Its high efficiency reduces heat generation, which is important for LED longevity. The wide input range allows it to operate from various supply voltages, including 12V, 24V, and 48V. The device's current-mode control provides good line and load regulation, ensuring consistent LED brightness. The soft-start feature prevents inrush current that could damage LEDs. The thermal shutdown protection safeguards the regulator in high-temperature lighting fixtures.
おすすめ
Test and Measurement Equipment
In test and measurement equipment, the L7986A provides clean, regulated power for precision analog circuits. Its low output noise and high PSRR are essential for maintaining measurement accuracy. The wide input range allows it to operate from various bench supplies. The device's high efficiency reduces heat, which can affect measurement stability. The PGOOD output can be used to indicate when the output is stable, enabling automated test sequences. The soft-start feature prevents voltage overshoot that could damage sensitive components.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: L7986A — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | L7986ATR | L7986 | L7987A | TPS54360 | LT8610 |
|---|---|---|---|---|---|---|
| Package | HSOP-8 | HSOP-8 - same | HSOP-8 - same | HSOP-8 - same | HSOP-8 - same | HSOP-8 - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Analog Devices |
| Input Voltage Range | 4.5V to 61V | 4.5V to 61V | 4.5V to 38V | 4.5V to 61V | 4.5V to 60V | 3.4V to 42V |
| Maximum Output Current | 3A | 3A | 3A | 4A | 3.5A | 2.5A |
| Switching Frequency | 250kHz | 250kHz | 250kHz | 250kHz | 100kHz to 2.5MHz | 200kHz to 2.2MHz |
| High-Side MOSFET On-Resistance | 250mOhm | 250mOhm | 250mOhm | 200mOhm | 92mOhm | 150mOhm |
| Quiescent Current | 2.5mA | 2.5mA | 2.5mA | 2.5mA | 146uA | 2.5uA |
| PGOOD Output | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Wide input voltage range up to 61V （vs L7986)
- Higher output current than LT8610 （vs LT8610)
- Lower quiescent current than TPS54360 （vs TPS54360)
設計ノート
For optimal performance, place the input capacitor (10uF) and output capacitor (22uF) as close to the VIN and SW pins as possible. Use short, wide traces for high-current paths to minimize parasitic inductance and resistance. The exposed pad should be connected to a large copper area for heat dissipation.
At 3A output with a 12V to 5V conversion, power dissipation is approximately 2.1W. The HSOP-8 package with exposed pad has a thermal resistance of about 40C/W, resulting in a temperature rise of 84C. Ensure adequate copper area or airflow to keep the junction temperature below 125C for reliable operation.
Do not exceed the absolute maximum input voltage of 61V. Ensure the feedback resistor divider uses 1% tolerance resistors to maintain output voltage accuracy. The soft-start capacitor value should be chosen to limit inrush current; a typical value of 10nF provides a 1ms soft-start time.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified, but suitable for automotive applications per datasheet.
