Texas Instruments

LM393BIDGKR - Dual 38V Open-Collector Comparator | Texas Instruments

部品番号: LM393BIDGKR ✓ 生産中
38 V Vdss 200 uA Id 8-pin VSSOP (DGK) Package
MOQ: 1 |

LM393BIDGKR 概要

Texas Instruments LM393BIDGKR is a dual commercial-grade differential comparator with open-collector outputs, a maximum rating of 38 V, low input offset voltage of 0.37 mV, and input bias current of 3.5 nA per comparator. It operates from a single supply and is packaged in an 8-pin VSSOP (DGK) surface-mount package. The two independent comparators support TTL, MOS, and CMOS-compatible output interfacing.

A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM393B belongs to the dual-comparator hierarchy, combining two differential comparator channels in one integrated circuit. It is commonly used in the wider category of signal-conditioning and threshold-detection ICs, where a sensed voltage is compared against a reference or control signal.

Key characteristics include a low supply current of 200 uA per comparator, a response time of 1 us, and a 2 kV human-body-model ESD rating. The common-mode input range includes ground, while the differential input range equals the maximum-rated supply voltage of 38 V. These features support robust sensing in industrial, communication, instrumentation, and embedded systems where the input may exceed conventional logic levels.

The B-version architecture retains the familiar LM393 dual-open-collector interface while improving offset voltage, supply-current consumption, input bias current, propagation delay, and ESD ruggedness. Dedicated input clamps strengthen the inputs against electrostatic discharge. Each output can sink logic-level current while remaining in a high-impedance state when inactive, allowing multiple open-collector nodes to share a pull-up network when the electrical design permits it.

Typical uses include overvoltage and undervoltage detection, window comparators, temperature-threshold circuits, sensor signal conditioning, relay or solenoid activation, and battery-powered monitoring. The low 200 uA per-comparator supply demand is particularly useful in systems where the comparator must remain active continuously without dominating the standby power budget.

Design with the open-collector output in mind: every output requires a pull-up resistor to the appropriate logic supply. Place input, output, and decoupling connections to minimize parasitic pickup, and account for input offset and bias currents when working near the switching threshold. Keep the common-mode and differential inputs within their specified operating limits.

This product page combines the LM393BIDGKR electrical characteristics, package and pin assignment, same-package alternatives, and practical application guidance. It supports faster engineering decisions by connecting the comparator’s offset, bias current, response time, ESD rating, and supply capability directly to common circuit-design requirements.

ドロップイン代替品: LM393BIDGKR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

LM2903BIDGKR

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 8-pin VSSOP (DGK)
Dual differential comparator · 2 independent channels · 38 V · 2 V to 36 V · Rail-to-rail · ±38 V · 0.37 mV maximum · 3.5 nA maximum

価格はお問い合わせください

データシートを見る →

LM393AIDGKR

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin VSSOP (DGK)
Retains the same 8-pin VSSOP pin arrangement and dual open-collector function; the older A-version has weaker offset, bias-current, response-time, and ESD improvements than the B-version.

📋 参考代替品(カタログ未掲載)

LM393VIDGKR

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin VSSOP (DGK)
Retains the same 8-pin VSSOP pin arrangement and dual open-collector function; the V-version differs in grade and does not provide the B-version improvements of 0.37 mV offset and 1 us response.

📋 参考代替品(カタログ未掲載)

LM2903AIDGKR

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin VSSOP (DGK)
Retains the same dual open-collector architecture and 8-pin VSSOP footprint; the A-version differs from the B-version in electrical refinements and temperature-grade selection.

📋 参考代替品(カタログ未掲載)

LM2903VIDGKR

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin VSSOP (DGK)
Retains the same dual open-collector architecture and 8-pin VSSOP footprint; the V-version differs from the B-version in grade and lacks its lower offset and faster response refinements.

📋 参考代替品(カタログ未掲載)

LM393BIDGKR 最大定格&電気的特性

Comparator Type Dual differential comparator
Number of Channels 2 channels
出力タイプ Open-collector
Maximum Supply Rating 38 V
Supply Current per Comparator 200 uA
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
Response Time 1 us
ESD Rating, Human Body Model 2 kV
Common-Mode Input Range Includes ground
Differential Input Range Up to 38 V
Logic Compatibility TTL, MOS, and CMOS
動作温度範囲 -40 C to +85 C
パッケージ 8-pin VSSOP (DGK)
ピン数 8 pins
実装タイプ Surface mount
Grade Commercial grade

LM393BIDGKR ピン構成

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
ピン 1 OUT1 — Open-collector output for comparator channel 1
ピン 2 IN1- — Inverting input for comparator channel 1
ピン 3 IN1+ — Non-inverting input for comparator channel 1
ピン 4 GND — Ground connection
ピン 5 IN2+ — Non-inverting input for comparator channel 2
ピン 6 IN2- — Inverting input for comparator channel 2
ピン 7 OUT2 — Open-collector output for comparator channel 2
ピン 8 VCC — Positive supply connection

主な用途

LM393BIDGKR の用途: 6 件s: Industrial Overvoltage Detection, Battery Voltage Monitoring, Temperature Threshold Detection, Sensor Signal Conditioning, Window and Fault Monitoring, Power-Sequencing Control.

🏭

Industrial Overvoltage Detection

The LM393BIDGKR fits industrial overvoltage detection because its differential inputs can operate across the maximum-rated 38 V range while the input offset is only 0.37 mV. A resistive divider scales the monitored voltage into the comparison range, and the open-collector output changes state when the threshold is exceeded. Add the required pull-up resistor to the control-logic rail and keep the sensing network away from switching nodes. The 2 kV HBM ESD rating and dedicated input clamps improve robustness, although normal component ratings do not replace external surge protection. The dual-channel configuration can monitor positive and negative rails independently when each divider uses a suitable reference.

⚡

Battery Voltage Monitoring

The LM393BIDGKR is appropriate for battery-voltage monitoring because each comparator consumes only 200 uA and has a low input bias current of 3.5 nA. The divider can sense a battery rail that exceeds the logic supply, while the open-collector output indicates charge or discharge thresholds through a pull-up. This arrangement avoids powering a microcontroller continuously for a simple threshold decision. Pull-up current remains part of the standing load and must be included in the battery budget. The 0.37 mV offset supports precise threshold placement, while the 38 V maximum rating accommodates higher-energy systems when all pins remain within their operating limits.

🌡️

Temperature Threshold Detection

The LM393BIDGKR can implement a compact temperature-alarm threshold around a resistive sensor and reference. Its 3.5 nA input bias current creates little error with a suitably high-value sensor network, while the 0.37 mV offset improves the switching-point repeatability. One open-collector channel can indicate an upper temperature limit, and the second can indicate a lower limit for an independent window alarm. Pull both outputs up to the system logic rail and use Schmitt-action hysteresis or a small positive-feedback network if chatter appears near the threshold. The 1 us response time is ample for many thermal systems and allows rapid shutdown signaling.

📡

Sensor Signal Conditioning

The LM393BIDGKR suits sensor signal conditioning when a low-level analog signal must be converted into a logic decision. Place the sensor output on the non-inverting input and a stable reference on the inverting input, or reverse the arrangement for an opposite output polarity. The 0.37 mV offset and 3.5 nA input bias current are useful when preserving a small sensor signal at the decision point. Its dual open-collector outputs can support digital alarm and enable functions without adding another comparator package. Keep the input traces short, use a stable reference, and add a pull-up resistor with a rise time appropriate for the receiving logic.

🖥️

Window and Fault Monitoring

The two channels of the LM393BIDGKR can create a window fault detector by comparing the monitored signal against upper and lower thresholds. One open-collector output reports operation above the upper limit, while the other reports operation below the lower limit. This arrangement is useful in power rails, communication links, and actuator feedback systems where both overvoltage and undervoltage must be reported. The open-collector outputs permit wired signaling when their logic states are designed appropriately. A 1 us response time supports fast fault detection, and the 38 V rating offers useful voltage-range headroom. External filtering and hysteresis remain important when the monitored signal contains noise.

🔧

Power-Sequencing Control

The LM393BIDGKR can support simple power-sequencing or power-good logic by comparing divided supply voltages with references. Its open-collector output can pull down an enable node or report a rail state, and the second channel can monitor another supply independently. The 200 uA supply current per comparator limits overhead in continuously monitored systems, while the 38 V rating is useful for industrial supply buses. Use a pull-up to the destination logic rail and account for the fact that an open-collector output cannot actively drive a high voltage. The comparator does not provide complete sequencing control by itself, so system logic must define the permitted order and fault response.

おすすめ製品の概要

TL431BIDGZR Precision shunt reference for the comparison threshold 使用用途: Industrial Overvoltage Detection TPS7A4701RGWR Texas Instruments 使用用途: Industrial Overvoltage Detection, Industrial Overvoltage Detection, Power-Sequencing Control, Power-Sequencing Control BQ29700DSER Battery protection and status companion 使用用途: Battery Voltage Monitoring TLV9061IDBVR Low-power comparator for a complementary battery channel 使用用途: Battery Voltage Monitoring, Sensor Signal Conditioning TMP36 Analog temperature sensor for threshold detection 使用用途: Temperature Threshold Detection TLV7001DCKR Low-voltage comparator for a secondary precision channel 使用用途: Temperature Threshold Detection LMT358 Low-noise amplifier for analog sensor conditioning 使用用途: Sensor Signal Conditioning TPS3839K33DBVR Voltage supervisor for complementary rail monitoring 使用用途: Window and Fault Monitoring, Power-Sequencing Control TLV431BIDBZR Adjustable precision reference for window thresholds 使用用途: Window and Fault Monitoring
What is the LM393BIDGKR?
The LM393BIDGKR is a Texas Instruments dual differential comparator with two open-collector outputs, housed in an 8-pin VSSOP (DGK) package. According to the Texas Instruments LM393B product page, each channel has a 0.37 mV low input offset, 3.5 nA low input bias current, and 200 uA supply current per comparator. It is intended for general-purpose voltage-threshold detection and signal-conditioning circuits.
What is the maximum voltage rating of LM393BIDGKR?
The LM393BIDGKR has a maximum rated supply voltage of 38 V, and its differential input range equals that maximum-rated supply voltage. According to the Texas Instruments LM393B product information, the common-mode input range includes ground. These limits must be respected in high-voltage sensing designs, particularly when transient voltages could appear at the input pins.
Where can I download the LM393BIDGKR datasheet PDF?
The official LM393BIDGKR technical documentation is available through the Texas Instruments LM393B product page linked on this page. It contains the ordering table, electrical characteristics, pin configuration, and application information for the LM393BIDGKR. Use the manufacturer document for the authoritative pin map and operating limits when designing a new PCB or replacing an existing comparator.
Where can I find the LM393BIDGKR pinout?
The LM393BIDGKR uses an 8-pin VSSOP (DGK) pin arrangement with pins 1 OUT1, 2 IN1-, 3 IN1+, 4 GND, 5 IN2+, 6 IN2-, 7 OUT2, and 8 VCC. According to the Texas Instruments LM393B datasheet, the exposed package construction does not add a separately wired pin in the 8-pin DGK ordering. Assign PCB tracks from the manufacturer pin-description table rather than relying only on package dimensions.
What are the key specifications of LM393BIDGKR that engineers should know?
The LM393BIDGKR combines two open-collector comparator channels, a 38 V maximum rating, 0.37 mV input offset, 3.5 nA input bias current, 200 uA supply current per comparator, 1 us response time, and a 2 kV HBM ESD rating. According to the Texas Instruments LM393B product page, it also supports TTL, MOS, and CMOS output interfacing and is specified from -40 C to +85 C.
Does LM393BIDGKR need a pull-up resistor?
Yes, each LM393BIDGKR open-collector output requires an external pull-up resistor to a suitable logic supply. According to the Texas Instruments LM393B datasheet, the outputs are compatible with TTL, MOS, and CMOS logic. The resistor value should be selected from the required sink current, rise-time, and system power budget rather than from the output’s high-impedance state alone.
How fast is the LM393BIDGKR comparator response?
The LM393BIDGKR has a specified response time of 1 us. According to the Texas Instruments LM393B product information, this faster propagation characteristic is one of the B-version improvements over earlier LM393 devices. For high-speed control loops, verify the complete datasheet timing conditions and the external pull-up network because open-collector transition behavior also depends on capacitance and resistor selection.
What is the difference between LM393B and earlier LM393 versions?
The LM393B improves offset voltage, supply-current consumption, input bias current, propagation delay, and ESD performance relative to earlier versions. According to the Texas Instruments LM393B product page, the B-version is also a drop-in replacement for LM293, LM393, LM2903, and the A and V versions when the package, grade, and operating requirements match. Verify those conditions before substituting a specific orderable part.
LM393BIDGKR vs LM2903BIDGKR - which is better for an industrial design?
The LM393BIDGKR and LM2903BIDGKR are closely related dual open-collector comparators in the same 8-pin VSSOP family. The LM393BIDGKR is identified as commercial grade with a -40 C to +85 C operating range, while the LM2903B family is commonly associated with a broader industrial temperature option. Choose the LM2903BIDGKR when its manufacturer-specified temperature qualification is required, and confirm its electrical limits against the LM393BIDGKR.
What can replace LM393BIDGKR?
A valid LM393BIDGKR replacement must use the same 8-pin VSSOP footprint, preserve the open-collector output arrangement, and remain within the original circuit’s voltage, temperature, offset, bias-current, and response-time requirements. The LM2903BIDGKR and compatible LM393-family orderable variants are the closest same-package candidates. Confirm the exact pin map and every operating limit before replacing the component.
Is LM393BIDGKR suitable for battery-powered monitoring?
The LM393BIDGKR is suitable for low-duty battery-powered monitoring when its 200 uA supply current per comparator fits the power budget. According to the Texas Instruments LM393B product information, its low input bias current is 3.5 nA, helping limit error in high-impedance sensor nodes. The application must also include an output pull-up and account for the pull-up’s continuous current.
Can LM393BIDGKR detect an overvoltage condition?
Yes, the LM393BIDGKR can compare a divided overvoltage signal against a reference and switch its open-collector output when the threshold is crossed. Its 0.37 mV input offset supports precise threshold decisions, while the 38 V maximum rating provides headroom for industrial signal conditioning. The sensing network must keep both inputs within the common-mode and differential rating, and the output requires a pull-up.
When should I choose LM393BIDGKR over a CMOS comparator?
Choose the LM393BIDGKR when the design benefits from open-collector outputs, a 38 V maximum rating, low input bias current of 3.5 nA, and compatibility with higher-voltage industrial sensing. A CMOS comparator may provide lower supply current or faster operation in some designs, but the LM393BIDGKR remains appropriate when open-collector interface flexibility and input tolerance are more important than minimum active power.
Is LM393BIDGKR in stock and what is its lead time?
Current stock and production lead time should be confirmed for the exact LM393BIDGKR orderable code through the Request a Quote form on this page. Stock can change between procurement events, and a distributor listing does not establish a guaranteed allocation. Provide the required quantity, target date, and packaging preference in the request to obtain a current sourcing response.
Where can I buy LM393BIDGKR online?
Use the Request a Quote form on this page to request LM393BIDGKR pricing, current availability, lead time, and shipment details. Quote requests help ensure that the response corresponds to the exact 8-pin VSSOP (DGK) commercial-grade orderable code rather than another LM393-family package, temperature grade, or reel designation.
What is the price of LM393BIDGKR?
Use the Request a Quote form on this page for the current LM393BIDGKR price and quantity breaks. Pricing depends on order quantity, procurement date, and the exact package and shipment configuration. The form provides a current response tied to the requested MPN and avoids confusion with older LM393 versions or other package options.

エンジニアリング参考データ: LM393BIDGKR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LM393BIDGKR when the design needs two open-collector comparator channels, a maximum 38 V rating, low 3.5 nA input bias current, and a commercial temperature range of -40 C to +85 C. It is especially suitable for industrial threshold detection, sensor conditioning, and battery monitoring where TTL, MOS, or CMOS interfacing is required. Select LM2903BIDGKR when the LM2903B temperature qualification better matches the product environment. The LM393AIDGKR, LM393VIDGKR, LM2903AIDGKR, and LM2903VIDGKR preserve the 8-pin VSSOP architecture but represent older electrical revisions; use them only when their exact grade, temperature range, and electrical characteristics meet the design. Every candidate requires external pull-up resistors. Confirm the exact pinout, absolute-maximum limits, production status, and package dimensions before replacing the LM393BIDGKR.

代替品との比較

パラメータ この製品 LM2903BIDGKR LM393AIDGKR LM393VIDGKR LM2903AIDGKR LM2903VIDGKR
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Comparator Count 2 2 2 2 2 2
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector

主な差別化要因

  • Lower input offset than earlier LM393-family revisions (vs LM393AIDGKR)
  • Lower input bias current for high-impedance sensing (vs LM393AIDGKR)
  • Faster switching response (vs LM393AIDGKR)
  • Improved electrostatic-discharge robustness (vs LM393VIDGKR)

設計ノート

Each open-collector output requires an external pull-up resistor. Select the resistor from the required output rise time, input capacitance, receiver leakage, and allowable sink current rather than applying one value to every interface. Keep the pull-up connection short and use a voltage compatible with the receiving TTL, MOS, or CMOS logic. Leaving an output without a pull-up leaves its logic level undefined when the transistor is off.

The specified supply current is 200 uA per comparator. For a two-channel device, the nominal comparator supply contribution is 400 uA before input bias current, output pull-up current, and other circuit losses. In battery-powered designs, calculate the continuous current through each pull-up because an open-collector output can remain continuously off. Use the complete power budget rather than treating the stated comparator current as the entire circuit demand.

Route the non-inverting and inverting input traces as a compact differential pair and keep them away from switching-regulator power nodes, relay coils, and high-current outputs. Place the input-sensing network close to the comparator to reduce leakage from PCB contamination and adjacent circuitry. The input bias current is only 3.5 nA, so very high source impedances can still shift the effective threshold; verify the resistor and sensor impedances when the threshold must remain precise.

Do not assume the 38 V maximum rating can be applied arbitrarily to either input. The differential input range may extend to the maximum-rated supply voltage, while the common-mode range includes ground but does not extend automatically to every positive voltage. Check both input pins against the manufacturer’s absolute-maximum and operating-limit tables. Add input attenuation or clamping when an external fault condition can exceed the allowed range.

A comparator can chatter when its input voltage crosses the threshold slowly or contains noise. Add controlled positive feedback for hysteresis where the circuit permits it, or place a small RC filter at the input to reject high-frequency noise. The 1 us response time is suitable for many threshold systems, but filtering adds delay and changes the switching threshold. Evaluate both effects before fixing the time constant.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The device is identified as commercial grade. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the cited product information.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LM393BIDGKR datasheet LM393BIDGKR pinout LM393BIDGKR datasheet pdf LM393BIDGKR equivalent LM393BIDGKR replacement LM393BIDGKR cross reference LM393BIDGKR price LM393BIDGKR stock Texas Instruments LM393BIDGKR LM393B dual comparator specifications LM393BIDGKR VSSOP-8 LM393BIDGKR open collector output LM393BIDGKR industrial voltage detection LM393BIDGKR vs LM2903BIDGKR LM393BIDGKR battery monitoring application

関連部品&用語

Texas Instruments LM393B LM393BIDGKR LM2903BIDGKR LM393AIDGKR LM393VIDGKR LM2903AIDGKR LM2903VIDGKR dual comparator differential comparator logic IC analog comparator signal-conditioning IC open-collector output open collector TTL CMOS MOS logic input offset voltage input bias current common-mode input voltage differential input voltage propagation delay response time ESD human body model 2 kV HBM VSSOP-8 DGK package surface-mount package industrial overvoltage detection battery voltage monitoring temperature threshold detection sensor signal conditioning window fault monitoring power sequencing
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示