LMZ36002RVQR - 60V 2A QFN Step-Down Power Module | Texas Instruments
部品番号: LMZ36002RVQR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $9.45 | $9.45 |
| 10 | $8.51 | $85.10 |
| 100 | $7.58 | $758.00 |
| 500 | $6.82 | $3,410.00 |
| 1,000 | $6.05 | $6,050.00 |
LMZ36002RVQR 概要
A power module is a complete integrated power solution that combines the switching controller, MOSFETs, inductor, and critical passives inside a single package, eliminating the most error-prone parts of discrete buck converter design. Power modules belong to the broader category of switching regulators (buck converters) within the DC/DC converter family, which itself sits in the power management IC hierarchy. Compared to discrete buck designs, modules reduce radiated EMI, shorten time-to-market, and free the engineer from inductor selection and feedback compensation.
Key features include 4.5V to 60V wide input range suitable for 12V, 24V, and 48V industrial buses, 2A continuous output current, adjustable switching frequency, external synchronization, internal MOSFETs with current-mode control, integrated bootstrap, and built-in protection including thermal shutdown, input undervoltage lockout, and cycle-by-cycle current limit. The LMZ36002RVQR requires as few as three external components (input cap, output cap, feedback resistors) to deliver a working regulated supply.
Internally the LMZ36002 uses peak current-mode control with internal compensation, a high-side P-channel / low-side N-channel MOSFET pair, and a coupled shielded inductor that minimizes radiated EMI. The exposed thermal pad on the QFN package provides a low thermal resistance path, allowing the module to deliver full 2A output across industrial temperature ranges without external heatsinking under most conditions.
Typical applications include factory automation 24V point-of-load rails, industrial sensor and actuator power, building automation, battery-powered systems up to 60V, and PoL supplies for FPGA / DSP / MCU subsystems. The wide input range also suits telecom equipment operating from nominal 48V backplanes.
When designing with this device, prioritize a 4-layer PCB with a continuous ground pour and stitch vias beneath the exposed thermal pad to keep the junction temperature within safe limits under full load. The RT/SS pin sets soft-start and switching frequency — refer to the manufacturer datasheet for resistor and capacitor selection tables before finalizing the BOM.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a faster path from selection to certified BOM.
ドロップイン代替品: LMZ36002RVQR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LMZ36002RVQR （同一形状・フットプリント） — 相違点: Continuous Output Current, Control Mode, Mounting Type, Operating Temperature Range, Output Voltage Range.
クイック比較ツール — 並列比較する代替部品を選択:
LMZ36002RVQT
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LMZ36002RVQRG4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
LMZ14203HTZ/NOPB
✅ ドロップイン✓ 在庫あり
$8.2 / 個
データシートを見る →LMZ36002RVQR 最大定格＆電気的特性
| トポロジー | Synchronous Buck (Step-Down) |
| 入力電圧範囲 | 4.5 V to 60 V |
| 出力電圧範囲 | 2.5 V to 7.5 V (adjustable) |
| Continuous Output Current | 2 A |
| Switching Frequency Range | 200 kHz to 1 MHz (adjustable, synchronizable) |
| パッケージ | 43-pin B3QFN (10 mm x 10 mm x 4.3 mm) |
| 実装タイプ | Surface Mount |
| 動作温度範囲 | -40 C to +105 C |
| Integrated Inductor | Yes (shielded, internal) |
| Control Mode | Peak Current-Mode with Internal Compensation |
| Protection Features | Thermal Shutdown, Input UVLO, Cycle-by-Cycle Current Limit, Hiccup |
| ソフトスタート | Adjustable via external capacitor |
| External Synchronization | Yes |
| RoHS ステータス | Compliant |
| Lead-Free | Yes |
LMZ36002RVQR ピン構成
| ピン 1 | VIN — Input voltage supply |
| ピン 2 | VIN — Input voltage supply |
| ピン 3 | VIN — Input voltage supply |
| ピン 4 | VIN — Input voltage supply |
| ピン 5 | VIN — Input voltage supply |
| ピン 6 | VIN — Input voltage supply |
| ピン 7 | PGND — Power ground |
| ピン 8 | PGND — Power ground |
| ピン 9 | PGND — Power ground |
| ピン 10 | PGND — Power ground |
| ピン 11 | VOUT — Regulated output voltage |
| ピン 12 | VOUT — Regulated output voltage |
| ピン 13 | VOUT — Regulated output voltage |
| ピン 14 | VOUT — Regulated output voltage |
| ピン 15 | VOUT — Regulated output voltage |
| ピン 16 | VOUT — Regulated output voltage |
| ピン 17 | VOUT — Regulated output voltage |
| ピン 18 | VOUT — Regulated output voltage |
| ピン 19 | PGND — Power ground |
| ピン 20 | PGND — Power ground |
| ピン 21 | PGND — Power ground |
| ピン 22 | PGND — Power ground |
| ピン 23 | PGND — Power ground |
| ピン 24 | PGND — Power ground |
| ピン 25 | PGND — Power ground |
| ピン 26 | PGND — Power ground |
| ピン 27 | PGND — Power ground |
| ピン 28 | PGND — Power ground |
| ピン 29 | AGND — Analog ground |
| ピン 30 | FB — Feedback (output voltage sense) |
| ピン 31 | RT/SS — Frequency / soft-start setting |
| ピン 32 | PGOOD — Power-good open-drain output |
| ピン 33 | EN — Enable (active high) |
| ピン 34 | SYNC — External clock synchronization input |
| ピン 35 | NC — Not connected (per datasheet) |
| ピン 36 | NC — Not connected (per datasheet) |
| ピン 37 | NC — Not connected (per datasheet) |
| ピン 38 | NC — Not connected (per datasheet) |
| ピン 39 | NC — Not connected (per datasheet) |
| ピン 40 | NC — Not connected (per datasheet) |
| ピン 41 | NC — Not connected (per datasheet) |
| ピン 42 | NC — Not connected (per datasheet) |
| ピン 43 | EP — Exposed thermal pad / PGND (must be soldered to PCB ground pour) |
主な用途
LMZ36002RVQR の用途: 6 件s: Industrial 24V Point-of-Load Rails, Building Automation and HVAC Control, Telecom 48V Backplane Subsystems, Battery-Powered Systems up to 60V, FPGA and DSP Point-of-Load Power, Automotive Auxiliary and Industrial Sensor Power.
Industrial 24V Point-of-Load Rails
The LMZ36002RVQR fits 24V industrial PoL rails because its 4.5V to 60V input window tolerates the 18V to 36V swing on nominal 24V factory buses without a pre-regulator. The integrated shielded inductor and 2A continuous output deliver clean 3.3V, 5V, or 7.5V rails for PLC I/O modules, sensor front-ends, and motor-driver logic. The module's peak current-mode control and 200 kHz to 1 MHz switching range allow designers to move the fundamental away from sensitive analog frequencies, while the 43-pin B3QFN package keeps the design footprint small inside DIN-rail enclosures.
おすすめ
Building Automation and HVAC Control
Building automation controllers operate from 24V AC/DC rectified rails with significant ripple and transient swings, so the LMZ36002RVQR's wide 4.5V to 60V input accommodates rectified 24VAC outputs directly. Its 2A output powers microcontroller, wireless communication, and relay-driver subsystems in HVAC controllers, thermostats, and access-control panels. The integrated module eliminates manual inductor selection, which is critical for design houses that need a single BOM across multiple SKUs. The exposed thermal pad distributes heat uniformly across the PCB, enabling fanless operation in wall-mounted enclosures.
おすすめ
Telecom 48V Backplane Subsystems
Nominal 48V telecom backplanes require point-of-load converters that survive transient excursions above 60V, and the LMZ36002RVQR's 60V absolute-max rating provides margin against load-dump and hot-swap transients on the backplane. The 2A output powers DSP, FPGA housekeeping, and line-interface cards that share a common -48V return. The adjustable switching frequency and external synchronization allow the LMZ36002RVQR to lock to a master clock, eliminating beat frequencies between converter stages in the same chassis. Built-in UVLO prevents backfeeding during upstream power sequencing.
おすすめ
Battery-Powered Systems up to 60V
Battery stacks from 12V lead-acid through 48V lithium chemistries fit directly into the LMZ36002RVQR's 4.5V to 60V input window, making it ideal for e-mobility controllers, portable instrumentation, and backup-power systems. The 2A output powers downstream regulators, motor pre-drivers, and communication modules from the same battery stack. Adjustable soft-start through the RT/SS pin limits inrush from discharged battery packs, protecting both the module and the upstream fuse. The shielded internal inductor keeps radiated EMI low, which matters in portable enclosures without metal shielding.
おすすめ
FPGA and DSP Point-of-Load Power
FPGA and DSP subsystems require low-noise, high-current point-of-load rails near the load to minimize IR drop and switching-node ringing, and the LMZ36002RVQR's 2A output supplies core and auxiliary rails from a 12V or 24V intermediate bus. Peak current-mode control provides a fast transient response that tracks DSP load steps within microseconds. The module's exposed thermal pad can be soldered directly to an inner PCB ground plane for low thermal resistance, and the integrated shielded inductor eliminates one of the largest discrete EMI sources. Adjustable switching lets the designer avoid interference with sensitive PLL frequencies.
おすすめ
Automotive Auxiliary and Industrial Sensor Power
In automotive auxiliary systems and industrial sensor hubs, the LMZ36002RVQR's 60V input rating handles load-dump transients on 12V and 24V automotive rails while delivering 2A for sensor clusters, CAN transceivers, and microcontroller subsystems. For AEC-Q100 qualified applications, the LMZ36002RVQR must be replaced by an automotive-grade equivalent; otherwise the standard part is widely used in non-safety automotive subsystems. The integrated module reduces PCB area versus discrete buck designs, which matters in space-constrained ECU modules and sensor pods. Built-in protection covers thermal shutdown and cycle-by-cycle current limit.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LMZ36002RVQR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LMZ36002RVQT | LMZ36002RVQRG4 | LMZ14203HTZ/NOPB |
|---|---|---|---|---|
| Package | 43-B3QFN (10x10 mm module) | 43-B3QFN (10x10 mm module) - same | 43-B3QFN (10x10 mm module) - same | TO-PMOD-7 power module - same module footprint family |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Input Voltage Range | 4.5 V to 60 V | 4.5 V to 60 V | 4.5 V to 60 V | 6 V to 42 V |
| Output Voltage Range | 2.5 V to 7.5 V | 2.5 V to 7.5 V | 2.5 V to 7.5 V | 0.8 V to 6 V |
| Continuous Output Current | 2 A | 2 A | 2 A | 3 A |
| Switching Frequency Range | 200 kHz to 1 MHz | 200 kHz to 1 MHz | 200 kHz to 1 MHz | Up to 1 MHz |
| External Synchronization | Yes (SYNC pin) | Yes (SYNC pin) | Yes (SYNC pin) | Yes (SYNC pin) |
| Operating Temperature | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C |
| Unit Price (qty-1, USD) | $9.45 | approx $8-12 (reel variant) | approx $9-12 (qualified-grade) | approx $8.50 (TO-PMOD module) |
主な差別化要因
- Widest input voltage range in the TI 2A QFN module family （vs LMZ14203HTZ/NOPB)
- Integrated shielded inductor eliminates manual inductor selection （vs TPS54360DDA)
- True drop-in 43-pin B3QFN alternatives available from same brand （vs LMZ36002RVQT)
設計ノート
Estimated: at VIN = 24V, VOUT = 5V, IOUT = 2A, the LMZ36002RVQR dissipates roughly (24V - 5V) × 2A = 38W internally. The 43-pin B3QFN module's exposed thermal pad must be soldered to a continuous copper pour of at least 1 square inch on inner and outer PCB layers with thermal vias to keep junction temperature within the 105 C operating limit. Without adequate PCB copper, the module will thermally limit below the rated 2A output in high-VIN designs.
Place the input ceramic capacitors (10 uF X7R minimum) directly on the VIN/PGND pads within 5 mm of the package to minimize switching-loop inductance. Place the output ceramic capacitors (22 uF X7R minimum, low-ESR) directly on the VOUT/PGND pads. Avoid routing analog signal traces under the module's switching node to prevent injected ripple on sensitive analog grounds.
Do not exceed the absolute maximum VIN of 65V even for transients; add a TVS diode or upstream fuse on the 48V telecom rail. The RT/SS pin sets both switching frequency and soft-start - using the wrong resistor value causes either thermal runaway or excessive inrush. The exposed pad (pin 43) MUST be soldered; floating the thermal pad triggers thermal shutdown within seconds of full load.
Use a 4-layer PCB with the inner layers dedicated to a continuous ground pour stitched with vias around the module's PGND pins. Keep the high-di/dt switching loop (VIN - HS MOSFET - inductor - PGND) as tight as possible; this loop's area directly determines radiated EMI. Reference the LMZ36002 manufacturer datasheet evaluation board layout for a known-good reference that passes CISPR 22 EMI without external shielding.
コンプライアンス情報
RoHS compliant per TI product page; not AEC-Q100 qualified - select automotive-grade LMR23630 family for vehicle applications. Halogen-free status not explicitly listed in verified data; marked unknown per Data Authenticity Rule 4.
