MAX1165AEUI+T - 16-Bit 200ksps Low-Power SAR ADC | Maxim Integrated
部品番号: MAX1165AEUI+T ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.1 | $131.00 |
| 100 | $11.4 | $1,140.00 |
| 500 | $10.05 | $5,025.00 |
| 1,000 | $8.9 | $8,900.00 |
MAX1165AEUI+T 概要
A successive-approximation register (SAR) ADC is a class of Nyquist-rate converter that uses an internal binary-search algorithm to step a comparator-controlled DAC toward the analog input, producing one conversion per N clock cycles for N bits of resolution. The SAR architecture combines high accuracy with deterministic latency, which makes it well suited to multiplexed data-acquisition front ends, industrial process control loops, and any system that requires a stable per-sample latency without the pipeline delay of higher-speed flash or pipelined converters. The MAX1165AEUI+T belongs to the broader hierarchy of analog-to-digital converter -> data converter -> signal-chain IC -> semiconductor.
Key features include 16-bit resolution with no missing codes, ±1.0 LSB INL and ±1.0 LSB DNL (max), a 100 kHz sinad of 86 dB, an internal +4.096V reference, and automatic power-down that reduces supply current to under 10 µA between conversions at reduced throughput. The parallel interface provides 8-/16-bit bus-compatible read cycles, simplifying connection to standard microcontrollers, FPGAs, and DSPs without a serial-port block. The internal reference and compact 28-pin TSSOP footprint reduce external BOM count and PCB area versus discrete ADC designs.
Typical applications include data-acquisition systems, pen-digitizers and touch-screen controllers, battery-powered portable instruments, industrial process control, and digital signal processing front ends where deterministic latency, 16-bit resolution, and low power dissipation are required. Designers should connect AGND and DGND at a single low-impedance point, bypass AVDD and DVDD with 0.1 µF and 10 µF capacitors placed close to the pins, and respect the reference-bypass capacitor placement to achieve the datasheet-noise performance.
ドロップイン代替品: MAX1165AEUI+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX1165AEUI+T （同一形状・フットプリント） — 相違点: Package, Operating Temperature, Input Type, Sampling Rate, Resolution.
クイック比較ツール — 並列比較する代替部品を選択:
MAX1166AEUI+T
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MAX1165ACUI+
✅ ドロップイン✓ 在庫あり
$6.1 / 個
データシートを見る →MAX1156AEUP+T
✅ ドロップイン✓ 在庫あり
$7.8 / 個
データシートを見る →MAX1147BEUP+T
✅ ドロップイン✓ 在庫あり
$8.7 / 個
データシートを見る →MAX1067BCEE
✅ ドロップイン✓ 在庫あり
$9.4 / 個
データシートを見る →ADS8320-HT
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MAX1165AEUI+T 最大定格＆電気的特性
| 分解能 | 16 bit |
| Architecture | Successive Approximation (SAR) |
| サンプリングレート | 200 ksps |
| Number of Channels | 1 |
| Input Type | True-Differential (MAX1165) |
| 入力電圧範囲 | 0 to +10 V (MAX1165); 0 to +5 V (MAX1166) |
| Analog Supply Voltage | +5 V |
| Digital Supply Voltage | +3 V to +5 V |
| INL (max) | ±1.0 LSB |
| DNL (max) | ±1.0 LSB |
| SINAD | 86 dB at 100 kHz input |
| Reference Type | Internal 4.096 V |
| インターフェース | Parallel (16-bit/8-bit bus) |
| パッケージ | 28-pin TSSOP (EUI) |
| 動作温度 | -40 °C to +85 °C (Industrial) |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
MAX1165AEUI+T ピン構成
| ピン 1 | AIN+ — Positive analog input |
| ピン 2 | AIN- — Negative analog input |
| ピン 3 | AGND — Analog ground |
| ピン 4 | AVDD — +5V analog supply |
| ピン 5 | REF — Internal 4.096V reference (decouple with 0.1uF) |
| ピン 6 | REFGND — Reference ground |
| ピン 7 | CS — Chip select (active low) |
| ピン 8 | RD — Read strobe (active low) |
| ピン 9 | WR — Write/convert start (active low) |
| ピン 10 | HBEN — High-byte enable for 8-bit bus mode |
| ピン 11 | CONVST — Conversion start |
| ピン 12 | EOC — End-of-conversion flag (active low) |
| ピン 13 | DGND — Digital ground |
| ピン 14 | DVDD — +3V to +5V digital supply |
| ピン 15 | D15 — Data bit 15 (MSB) |
| ピン 16 | D14 — Data bit 14 |
| ピン 17 | D13 — Data bit 13 |
| ピン 18 | D12 — Data bit 12 |
| ピン 19 | D11 — Data bit 11 |
| ピン 20 | D10 — Data bit 10 |
| ピン 21 | D9 — Data bit 9 |
| ピン 22 | D8 — Data bit 8 |
| ピン 23 | D7 — Data bit 7 |
| ピン 24 | D6 — Data bit 6 |
| ピン 25 | D5 — Data bit 5 |
| ピン 26 | D4 — Data bit 4 |
| ピン 27 | D3 — Data bit 3 |
| ピン 28 | D2 — Data bit 2 |
主な用途
MAX1165AEUI+T の用途: 6 件s: Industrial Data Acquisition Systems, Pen Digitizer and Touch-Screen Controllers, Battery-Powered Portable Instrumentation, Process Control and PLC Analog Input Modules, DSP Front End and Signal Processing, Medical and Scientific Instrumentation.
Industrial Data Acquisition Systems
The MAX1165AEUI+T fits industrial data acquisition front ends because of its 16-bit resolution, ±1.0 LSB INL/DNL, and 200 ksps throughput, which together deliver a 86 dB SINAD at the Nyquist bandwidth. The 0 to +10 V true-differential input range connects directly to 4-20 mA loop receivers with on-board sense resistors or to instrumentation amplifiers driving ±10 V signals, eliminating external level-shift circuitry. Placed between the transducer and a microcontroller, the parallel 16-bit interface supports deterministic single-cycle reads with no handshake overhead. Unlike sigma-delta ADCs, the SAR core provides deterministic per-sample latency, which simplifies event-triggered logging and synchronized multi-channel scanning in PLC and SCADA modules.
おすすめ
Pen Digitizer and Touch-Screen Controllers
The MAX1165AEUI+T serves pen-digitizer and touch-screen controller applications where the 200 ksps sampling rate captures stylus position changes with sub-millisecond resolution, while the 16-bit conversion captures the full dynamic range of the electrode waveform. The parallel interface minimizes read latency, which is critical when the host controller must compute stylus coordinates within tight timing budgets. The automatic power-down feature reduces supply current below 10 µA between scans, which is essential in battery-powered stylus and tablet designs. Compared with integrating dual-slope ADCs, the SAR core settles much faster per conversion, enabling higher report rates for high-resolution digitizer surfaces.
おすすめ
Battery-Powered Portable Instrumentation
The MAX1165AEUI+T's automatic power-down reduces quiescent current to under 10 µA between conversions, which is critical for battery-powered portable instruments that spend most of their duty cycle in standby. The internal +4.096 V reference eliminates the need for an external reference IC, which reduces BOM cost, quiescent current, and PCB area. The 200 ksps throughput supports rapid burst-mode sampling for transient capture, while the 16-bit resolution preserves the dynamic range needed for sensor front ends such as strain gauges, thermocouples, and load cells. Compared with continuous-conversion ADCs, the MAX1165AEUI+T's per-conversion current consumption is significantly lower in low-throughput modes, extending battery life in field-deployed instruments.
おすすめ
Process Control and PLC Analog Input Modules
The MAX1165AEUI+T is well suited for analog input modules in PLC and process-control systems because its ±1.0 LSB INL and ±10 V input range map directly onto industrial transducer signals without external signal conditioning. The parallel interface allows a backplane FPGA or ASIC to multiplex multiple MAX1165AEUI+T channels and present a unified data bus to the central processor, simplifying channel-count scaling. The 86 dB SINAD at 100 kHz input frequency preserves signal fidelity for vibration, acoustic, and flow-rate measurements in industrial environments. The 28-pin TSSOP package enables high channel density on standard 4-layer PLC backplanes.
おすすめ
DSP Front End and Signal Processing
The MAX1165AEUI+T's deterministic per-sample latency and parallel 16-bit interface make it a clean front end for digital signal processors and FPGAs implementing FFTs, filters, and control loops. The 200 ksps throughput supports audio-bandwidth signal acquisition up to 100 kHz, while the 86 dB SINAD provides more than 14 effective bits of dynamic range for spectral analysis. The internal reference and on-chip clock reduce the external component count, simplifying PCB layout for high-density DSP daughter cards. The SAR core's no-pipeline-delay property makes the MAX1165AEUI+T preferable to pipelined ADCs in real-time control and adaptive filtering applications.
おすすめ
Medical and Scientific Instrumentation
The MAX1165AEUI+T's 16-bit no-missing-codes performance and ±1.0 LSB INL/DNL are sufficient for medical and scientific instruments such as blood analyzers, patient monitors, and bench-top chromatography data systems where low-level analog signals must be digitized with high DC accuracy. The internal reference's low drift and the 0-10 V input range support direct connection to amplified bioelectric and electrochemical sensors. The automatic power-down aids battery-powered ambulatory devices, while the parallel bus allows direct interfacing to FPGA-based signal processors. The industrial -40 °C to +85 °C temperature range suits laboratory and field-deployed clinical equipment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX1165AEUI+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX1166AEUI+T | MAX1165ACUI+ | MAX1156AEUP+T | MAX1147BEUP+T | ADS8320 |
|---|---|---|---|---|---|---|
| Package | TSSOP-28 | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) |
| Brand | Maxim Integrated | Maxim Integrated (same) | Maxim Integrated (same) | Maxim Integrated (same) | Maxim Integrated (same) | Texas Instruments (cross-brand) |
| Resolution | 16 bit | 16 bit | 16 bit | 12 bit | 12 bit | 16 bit |
| Sampling Rate | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 100 ksps |
| Input Voltage Range | 0 to +10 V | 0 to +5 V | 0 to +10 V | 0 to +10 V | 0 to +10 V | 0 to +5 V |
| Interface | Parallel | Parallel | Parallel | Parallel | Serial | Serial (SPI) |
| INL (max) | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±2.0 LSB |
| Reference Type | Internal 4.096V | Internal 4.096V | Internal 4.096V | Internal 4.096V | Internal 4.096V | External |
| Operating Temperature | -40C to +85C | -40C to +85C | 0C to +70C | -40C to +85C | -40C to +85C | -40C to +85C |
主な差別化要因
- True 0-10V input range at 16-bit resolution （vs MAX1166AEUI+T)
- Industrial -40C to +85C temperature grade （vs MAX1165ACUI+)
- 200 ksps throughput at full 16-bit resolution （vs ADS8320)
設計ノート
Use a single +5V analog supply on AVDD and a separate +3V-to-+5V digital supply on DVDD. Decouple AVDD and DVDD each with a 0.1uF ceramic capacitor placed within 2mm of the respective supply pin, in parallel with a 10uF tantalum or ceramic bulk capacitor. Tie AGND and DGND together at a single low-impedance star point near the ADC. The internal 4.096V reference requires a 0.1uF ceramic bypass capacitor at the REF pin; using a smaller capacitor or omitting it degrades SINAD and INL.
Route the 16 data lines (D15..D0) together as a parallel bus with matched trace lengths to within 5mm; longer traces cause setup-time skew between bits. Keep analog input traces (AIN+, AIN-) short and guarded with a ground trace on each side to reduce common-mode noise pickup. Place the reference-bypass capacitor adjacent to the REF pin with a short, low-impedance trace to REFGND. Avoid routing digital lines under the analog input region to prevent coupling of switching transients into the input path.
Do not connect AGND and DGND at multiple points; a ground loop between the analog and digital return paths degrades INL/DNL. The CS, RD, and WR pins must observe the timing relationships in the datasheet timing diagram; asserting CS and RD simultaneously but out of sequence can produce spurious EOC pulses. Maximum throughput is 200 ksps with a 5MHz conversion clock; lower clock frequencies extend the acquisition time. Driving the inputs beyond ±15V can damage the analog input ESD clamps - add external clamping diodes for high-transient environments.
コンプライアンス情報
RoHS and REACH compliant per Maxim product declaration. Not AEC-Q100 qualified; not intended for automotive under-the-hood applications. Industrial -40C to +85C operating range per datasheet. Halogen-free status not explicitly stated in retrieved data.
