MAX1165AEUI+T - 16-Bit 200ksps Low-Power SAR ADC | Maxim Integrated
料号： MAX1165AEUI+T ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.1 | $131.00 |
| 100 | $11.4 | $1,140.00 |
| 500 | $10.05 | $5,025.00 |
| 1,000 | $8.9 | $8,900.00 |
MAX1165AEUI+T 概述
A successive-approximation register (SAR) ADC is a class of Nyquist-rate converter that uses an internal binary-search algorithm to step a comparator-controlled DAC toward the analog input, producing one conversion per N clock cycles for N bits of resolution. The SAR architecture combines high accuracy with deterministic latency, which makes it well suited to multiplexed data-acquisition front ends, industrial process control loops, and any system that requires a stable per-sample latency without the pipeline delay of higher-speed flash or pipelined converters. The MAX1165AEUI+T belongs to the broader hierarchy of analog-to-digital converter -> data converter -> signal-chain IC -> semiconductor.
Key features include 16-bit resolution with no missing codes, ±1.0 LSB INL and ±1.0 LSB DNL (max), a 100 kHz sinad of 86 dB, an internal +4.096V reference, and automatic power-down that reduces supply current to under 10 µA between conversions at reduced throughput. The parallel interface provides 8-/16-bit bus-compatible read cycles, simplifying connection to standard microcontrollers, FPGAs, and DSPs without a serial-port block. The internal reference and compact 28-pin TSSOP footprint reduce external BOM count and PCB area versus discrete ADC designs.
Typical applications include data-acquisition systems, pen-digitizers and touch-screen controllers, battery-powered portable instruments, industrial process control, and digital signal processing front ends where deterministic latency, 16-bit resolution, and low power dissipation are required. Designers should connect AGND and DGND at a single low-impedance point, bypass AVDD and DVDD with 0.1 µF and 10 µF capacitors placed close to the pins, and respect the reference-bypass capacitor placement to achieve the datasheet-noise performance.
直接替换替代料： MAX1165AEUI+T ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MAX1165AEUI+T （相同外形与封装尺寸） ——差异在于 Package, Operating Temperature, Input Type, Sampling Rate, Resolution.
快速对比工具——选择替代料号进行并排对比：
MAX1166AEUI+T
✅ 直接替换📋 参考替代料（不在目录中）
MAX1165ACUI+
✅ 直接替换✓ 有现货
$6.1 / 个
查看数据手册 →MAX1156AEUP+T
✅ 直接替换✓ 有现货
$7.8 / 个
查看数据手册 →MAX1147BEUP+T
✅ 直接替换✓ 有现货
$8.7 / 个
查看数据手册 →MAX1067BCEE
✅ 直接替换✓ 有现货
$9.4 / 个
查看数据手册 →ADS8320-HT
✅ 直接替换✓ 有现货
联系询价
查看数据手册 →MAX1165AEUI+T 最大额定值与电气特性
| 分辨率 | 16 bit |
| Architecture | Successive Approximation (SAR) |
| 采样率 | 200 ksps |
| Number of Channels | 1 |
| Input Type | True-Differential (MAX1165) |
| 输入电压范围 | 0 to +10 V (MAX1165); 0 to +5 V (MAX1166) |
| Analog Supply Voltage | +5 V |
| Digital Supply Voltage | +3 V to +5 V |
| INL (max) | ±1.0 LSB |
| DNL (max) | ±1.0 LSB |
| SINAD | 86 dB at 100 kHz input |
| Reference Type | Internal 4.096 V |
| 接口 | Parallel (16-bit/8-bit bus) |
| 封装 | 28-pin TSSOP (EUI) |
| 工作温度 | -40 °C to +85 °C (Industrial) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
MAX1165AEUI+T 引脚配置
| 引脚 1 | AIN+ — Positive analog input |
| 引脚 2 | AIN- — Negative analog input |
| 引脚 3 | AGND — Analog ground |
| 引脚 4 | AVDD — +5V analog supply |
| 引脚 5 | REF — Internal 4.096V reference (decouple with 0.1uF) |
| 引脚 6 | REFGND — Reference ground |
| 引脚 7 | CS — Chip select (active low) |
| 引脚 8 | RD — Read strobe (active low) |
| 引脚 9 | WR — Write/convert start (active low) |
| 引脚 10 | HBEN — High-byte enable for 8-bit bus mode |
| 引脚 11 | CONVST — Conversion start |
| 引脚 12 | EOC — End-of-conversion flag (active low) |
| 引脚 13 | DGND — Digital ground |
| 引脚 14 | DVDD — +3V to +5V digital supply |
| 引脚 15 | D15 — Data bit 15 (MSB) |
| 引脚 16 | D14 — Data bit 14 |
| 引脚 17 | D13 — Data bit 13 |
| 引脚 18 | D12 — Data bit 12 |
| 引脚 19 | D11 — Data bit 11 |
| 引脚 20 | D10 — Data bit 10 |
| 引脚 21 | D9 — Data bit 9 |
| 引脚 22 | D8 — Data bit 8 |
| 引脚 23 | D7 — Data bit 7 |
| 引脚 24 | D6 — Data bit 6 |
| 引脚 25 | D5 — Data bit 5 |
| 引脚 26 | D4 — Data bit 4 |
| 引脚 27 | D3 — Data bit 3 |
| 引脚 28 | D2 — Data bit 2 |
典型应用
MAX1165AEUI+T 适用于 6 应用s: Industrial Data Acquisition Systems, Pen Digitizer and Touch-Screen Controllers, Battery-Powered Portable Instrumentation, Process Control and PLC Analog Input Modules, DSP Front End and Signal Processing, Medical and Scientific Instrumentation.
Industrial Data Acquisition Systems
The MAX1165AEUI+T fits industrial data acquisition front ends because of its 16-bit resolution, ±1.0 LSB INL/DNL, and 200 ksps throughput, which together deliver a 86 dB SINAD at the Nyquist bandwidth. The 0 to +10 V true-differential input range connects directly to 4-20 mA loop receivers with on-board sense resistors or to instrumentation amplifiers driving ±10 V signals, eliminating external level-shift circuitry. Placed between the transducer and a microcontroller, the parallel 16-bit interface supports deterministic single-cycle reads with no handshake overhead. Unlike sigma-delta ADCs, the SAR core provides deterministic per-sample latency, which simplifies event-triggered logging and synchronized multi-channel scanning in PLC and SCADA modules.
推荐
Pen Digitizer and Touch-Screen Controllers
The MAX1165AEUI+T serves pen-digitizer and touch-screen controller applications where the 200 ksps sampling rate captures stylus position changes with sub-millisecond resolution, while the 16-bit conversion captures the full dynamic range of the electrode waveform. The parallel interface minimizes read latency, which is critical when the host controller must compute stylus coordinates within tight timing budgets. The automatic power-down feature reduces supply current below 10 µA between scans, which is essential in battery-powered stylus and tablet designs. Compared with integrating dual-slope ADCs, the SAR core settles much faster per conversion, enabling higher report rates for high-resolution digitizer surfaces.
推荐
Battery-Powered Portable Instrumentation
The MAX1165AEUI+T's automatic power-down reduces quiescent current to under 10 µA between conversions, which is critical for battery-powered portable instruments that spend most of their duty cycle in standby. The internal +4.096 V reference eliminates the need for an external reference IC, which reduces BOM cost, quiescent current, and PCB area. The 200 ksps throughput supports rapid burst-mode sampling for transient capture, while the 16-bit resolution preserves the dynamic range needed for sensor front ends such as strain gauges, thermocouples, and load cells. Compared with continuous-conversion ADCs, the MAX1165AEUI+T's per-conversion current consumption is significantly lower in low-throughput modes, extending battery life in field-deployed instruments.
推荐
Process Control and PLC Analog Input Modules
The MAX1165AEUI+T is well suited for analog input modules in PLC and process-control systems because its ±1.0 LSB INL and ±10 V input range map directly onto industrial transducer signals without external signal conditioning. The parallel interface allows a backplane FPGA or ASIC to multiplex multiple MAX1165AEUI+T channels and present a unified data bus to the central processor, simplifying channel-count scaling. The 86 dB SINAD at 100 kHz input frequency preserves signal fidelity for vibration, acoustic, and flow-rate measurements in industrial environments. The 28-pin TSSOP package enables high channel density on standard 4-layer PLC backplanes.
推荐
DSP Front End and Signal Processing
The MAX1165AEUI+T's deterministic per-sample latency and parallel 16-bit interface make it a clean front end for digital signal processors and FPGAs implementing FFTs, filters, and control loops. The 200 ksps throughput supports audio-bandwidth signal acquisition up to 100 kHz, while the 86 dB SINAD provides more than 14 effective bits of dynamic range for spectral analysis. The internal reference and on-chip clock reduce the external component count, simplifying PCB layout for high-density DSP daughter cards. The SAR core's no-pipeline-delay property makes the MAX1165AEUI+T preferable to pipelined ADCs in real-time control and adaptive filtering applications.
推荐
Medical and Scientific Instrumentation
The MAX1165AEUI+T's 16-bit no-missing-codes performance and ±1.0 LSB INL/DNL are sufficient for medical and scientific instruments such as blood analyzers, patient monitors, and bench-top chromatography data systems where low-level analog signals must be digitized with high DC accuracy. The internal reference's low drift and the 0-10 V input range support direct connection to amplified bioelectric and electrochemical sensors. The automatic power-down aids battery-powered ambulatory devices, while the parallel bus allows direct interfacing to FPGA-based signal processors. The industrial -40 °C to +85 °C temperature range suits laboratory and field-deployed clinical equipment.
推荐
推荐产品汇总
工程参考数据： MAX1165AEUI+T ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX1166AEUI+T | MAX1165ACUI+ | MAX1156AEUP+T | MAX1147BEUP+T | ADS8320 |
|---|---|---|---|---|---|---|
| Package | TSSOP-28 | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) | TSSOP-28 (same) |
| Brand | Maxim Integrated | Maxim Integrated (same) | Maxim Integrated (same) | Maxim Integrated (same) | Maxim Integrated (same) | Texas Instruments (cross-brand) |
| Resolution | 16 bit | 16 bit | 16 bit | 12 bit | 12 bit | 16 bit |
| Sampling Rate | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 200 ksps | 100 ksps |
| Input Voltage Range | 0 to +10 V | 0 to +5 V | 0 to +10 V | 0 to +10 V | 0 to +10 V | 0 to +5 V |
| Interface | Parallel | Parallel | Parallel | Parallel | Serial | Serial (SPI) |
| INL (max) | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±1.0 LSB | ±2.0 LSB |
| Reference Type | Internal 4.096V | Internal 4.096V | Internal 4.096V | Internal 4.096V | Internal 4.096V | External |
| Operating Temperature | -40C to +85C | -40C to +85C | 0C to +70C | -40C to +85C | -40C to +85C | -40C to +85C |
关键差异点
- True 0-10V input range at 16-bit resolution （对比 MAX1166AEUI+T)
- Industrial -40C to +85C temperature grade （对比 MAX1165ACUI+)
- 200 ksps throughput at full 16-bit resolution （对比 ADS8320)
设计说明
Use a single +5V analog supply on AVDD and a separate +3V-to-+5V digital supply on DVDD. Decouple AVDD and DVDD each with a 0.1uF ceramic capacitor placed within 2mm of the respective supply pin, in parallel with a 10uF tantalum or ceramic bulk capacitor. Tie AGND and DGND together at a single low-impedance star point near the ADC. The internal 4.096V reference requires a 0.1uF ceramic bypass capacitor at the REF pin; using a smaller capacitor or omitting it degrades SINAD and INL.
Route the 16 data lines (D15..D0) together as a parallel bus with matched trace lengths to within 5mm; longer traces cause setup-time skew between bits. Keep analog input traces (AIN+, AIN-) short and guarded with a ground trace on each side to reduce common-mode noise pickup. Place the reference-bypass capacitor adjacent to the REF pin with a short, low-impedance trace to REFGND. Avoid routing digital lines under the analog input region to prevent coupling of switching transients into the input path.
Do not connect AGND and DGND at multiple points; a ground loop between the analog and digital return paths degrades INL/DNL. The CS, RD, and WR pins must observe the timing relationships in the datasheet timing diagram; asserting CS and RD simultaneously but out of sequence can produce spurious EOC pulses. Maximum throughput is 200 ksps with a 5MHz conversion clock; lower clock frequencies extend the acquisition time. Driving the inputs beyond ±15V can damage the analog input ESD clamps - add external clamping diodes for high-transient environments.
合规信息
RoHS and REACH compliant per Maxim product declaration. Not AEC-Q100 qualified; not intended for automotive under-the-hood applications. Industrial -40C to +85C operating range per datasheet. Halogen-free status not explicitly stated in retrieved data.
