MAX232IDWRG4 - Dual RS-232 Transceiver | Texas Instruments
部品番号: MAX232IDWRG4 ✓ 生産中MAX232IDWRG4 概要
An RS-232 transceiver is an interface IC that translates between complementary TTL/CMOS logic levels and the bipolar voltage levels used by RS-232 links. The MAX232 family combines driver, receiver, and charge-pump circuitry in one package, reducing the number of components required for a conventional asynchronous serial port. Its integrated charge pump generates the positive and negative voltages needed to transmit RS-232 signals from a single 5 V supply.
The MAX232IDWRG4 provides two drivers and two receivers, supporting two RS-232 channels when each driver is paired with one receiver. It supports communication rates up to 120 kbit/s, accepts receiver input levels down to -30 V, and operates from one 5 V supply. Four external 1.0 uF charge-pump capacitors are used with the integrated voltage converter. Typical supply current is 8 mA.
Each receiver includes the input protection required for handling RS-232 bipolar voltages, while the driver stage provides the voltage swing expected by RS-232 equipment. The MAX232IDWRG4 is specified for industrial temperature operation from -40 C to +85 C and is available in a 16-pin SOIC package. Its eight signal pins divide into four driver inputs, four driver outputs, four receiver inputs, and four receiver outputs.
Typical uses include industrial serial consoles, data-acquisition equipment, test and measurement instruments, printer interfaces, and embedded systems that require a compact RS-232 port. Because the transceiver operates from a single 5 V rail, it can be paired directly with 5 V microcontrollers and programmable logic devices without a separate negative supply for the RS-232 interface.
When laying out a MAX232IDWRG4 circuit, place the four 1.0 uF charge-pump capacitors close to their associated pins and route the RS-232 connector interface away from sensitive analog and high-speed digital traces. Confirm signal polarity, grounding, and logic levels before connecting the board to another RS-232 system. The device supports 120 kbit/s operation, but cable length, termination, connector quality, and the remote system must also satisfy the requirements of the intended RS-232 application.
This product page combines the manufacturer specifications with practical interface-design guidance, verified drop-in alternatives, application-oriented circuit roles, and a parameter comparison for faster component selection.
ドロップイン代替品: MAX232IDWRG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX232IDWRG4 (同一形状・フットプリント) — 相違点: Package, Data Rate, ESD Protection, Supply Voltage, Interface Standard.
MAX232DW
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232IDW
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232CDW
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MAX232EESE+
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232ACSE+T
✅ ドロップイン価格はお問い合わせください
データシートを見る →MAX232IDWRG4 仕様
| Device Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| データレート | Up to 120 kbit/s |
| 電源電圧 | 5 V |
| Number of Supply Inputs | 1 |
| Charge-Pump Capacitor Value | 1.0 uF |
| Typical Supply Current | 8 mA |
| Receiver Input Levels | -30 V to +30 V |
| ESD Protection | Human-body-model protection exceeding 2000 V |
| 動作温度 | -40 C to +85 C |
| Temperature Grade | Industrial |
| パッケージ | 16-pin SOIC |
| Package Terminal Count | 16 |
| 実装タイプ | Surface mount |
MAX232IDWRG4 16 ピン配置ガイド
MAX232IDWRG4 (16 パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX232IDWRG4.
詳細は データシート をご参照ください。
主な用途
MAX232IDWRG4 の用途: 6 件s: Industrial Serial Console, Data-Acquisition Equipment, Test and Measurement Instruments, Embedded Controller Communication, Printer and Peripheral Interface, Network Equipment Management Port.
Industrial Serial Console
The MAX232IDWRG4 fits an industrial serial console because it combines two RS-232 drivers and two receivers with operation from a single 5 V supply. A console link can use one driver and one receiver pair while leaving the second channel available for a second peripheral or diagnostic connection. The 120 kbit/s maximum data rate supports common asynchronous console traffic, while the -40 C to +85 C rating covers industrial environments. Place the four 1.0 uF charge-pump capacitors close to their pins and route the connector-side traces away from sensitive digital circuitry to reduce coupling.
おすすめ
Data-Acquisition Equipment
The MAX232IDWRG4 is suitable for connecting laboratory or field data-acquisition equipment to a legacy RS-232 controller. Two driver and receiver channels allow communication and handshake signals to share one compact interface IC, while the single 5 V rail simplifies connection to modern control logic. The 120 kbit/s rate is suitable for command traffic and moderate data transfers. Use the receiver input capability down to -30 V to accommodate bipolar RS-232 signals, and keep the cable-side network physically separated from sensitive analog measurement circuitry.
おすすめ
Test and Measurement Instruments
A MAX232IDWRG4-based RS-232 port can provide simple host-computer control for oscilloscopes, programmable supplies, and bench instruments that retain legacy serial interfaces. The device’s two transmitters and two receivers support both command traffic and hardware-control signals without requiring a separate negative supply. Its 120 kbit/s limit accommodates many low-speed instrument-control protocols, and its 16-pin SOIC package simplifies assembly in compact equipment. Confirm the instrument’s logic polarity, flow-control requirements, connector wiring, and maximum cable length before finalizing the interface.
おすすめ
Embedded Controller Communication
The MAX232IDWRG4 can bridge a 5 V embedded controller to an RS-232 network when a legacy peripheral requires bipolar serial signaling. The integrated charge pump derives the required positive and negative line voltages from one 5 V rail, avoiding a separate negative-supply circuit. The 120 kbit/s maximum rate accommodates many command and status protocols, while the 16-pin SOIC footprint supports compact controller boards. Use one channel for transmit and the other for receive when hardware flow control is unnecessary, and ensure the microcontroller levels match the MAX232 logic-side inputs and outputs.
おすすめ
Printer and Peripheral Interface
The MAX232IDWRG4 provides a compact interface for printers, scanners, and legacy peripherals that use RS-232 rather than USB or Ethernet. Its two drivers and two receivers allow bidirectional communication plus additional status or flow-control signals when required. Operation from a single 5 V rail reduces supply complexity, and 120 kbit/s is suitable for many peripheral-control protocols. The design should verify the peripheral’s connector pinout, logic polarity, handshake timing, and cable requirements. Adequate grounding and protection at the connector are also important when the linked equipment sits on a different power source.
おすすめ
Network Equipment Management Port
The MAX232IDWRG4 can implement an RS-232 management connection on equipment that retains a console or out-of-band management interface. The two-channel arrangement supports a primary management link and a secondary status channel, while single 5 V operation is convenient for line cards and embedded modules. The 120 kbit/s rate is sufficient for many command-based management protocols, and the industrial temperature range supports controlled equipment rooms or industrial enclosures. Use separate protection or filtering at externally accessible connectors, and avoid routing RS-232 cable-side traces beneath sensitive clock or analog circuitry.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX232IDWRG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX232DW | MAX232IDW | MAX232CDW | MAX232EESE+ | MAX232ACSE+ |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40 C to +85 C | 0 C to +70 C | -40 C to +85 C | 0 C to +70 C | -40 C to +85 C | -40 C to +85 C |
主な差別化要因
- Full industrial temperature coverage (vs MAX232DW)
- Four-channel RS-232 integration (vs MAX232ACSE+)
- 120 kbit/s single-supply operation (vs MAX232EESE+)
設計ノート
Place the four required 1.0 uF charge-pump capacitors close to their associated MAX232IDWRG4 pins. Keep each capacitor’s connection path short and follow the capacitor configuration shown in the Texas Instruments datasheet. A long or looped capacitor connection can increase charge-pump loop area and allow switching energy to couple into nearby logic or analog signals.
Separate the logic-side nets from the RS-232 connector-side nets in the PCB layout. Route driver outputs toward the protected connector circuit and receiver inputs away from clocks, sensors, and sensitive analog inputs. Maintain a clear return-current path and use a suitable chassis or signal-ground strategy at the connector to reduce common-mode noise and ground-potential problems.
Do not interchange the logic-side and cable-side pins. Driver inputs and receiver outputs connect to controller logic, while driver outputs and receiver inputs connect to RS-232 lines. Verify that the MAX232IDWRG4 voltage levels match the controller, confirm signal polarity at both ends, and check whether the remote equipment requires hardware flow control. The device’s 120 kbit/s rating does not override connector, cable, or grounding limitations.
The typical supply current of the MAX232IDWRG4 is 8 mA, but the complete circuit also includes the charge-pump capacitor current and connected logic loads. Provide a stable 5 V rail with adequate transient capability and place local supply bypassing close to the device pins. If the same supply feeds switching converters or motors, isolate noisy current paths and maintain adequate filtering between those loads and the RS-232 interface.
コンプライアンス情報
The industrial-temperature MAX232IDWRG4 is not identified as an automotive-qualified AEC-Q100 variant. Compliance declarations for RoHS, REACH, lead-free construction, halogen-free construction, and conflict minerals were not identified and must be confirmed using the manufacturer product documentation.