Texas Instruments

MAX232IDWRG4 - Dual RS-232 Transceiver | Texas Instruments

Артикул: MAX232IDWRG4 ✓ Активен
5 V Vdss 8 mA Id 16-pin SOIC Package
MOQ: 1 |

MAX232IDWRG4 Обзор

Texas Instruments MAX232IDWRG4 is a dual RS-232 driver and receiver transceiver with two transmit channels and two receive channels, a maximum data rate of 120 kbit/s, and a single 5 V power supply. The device is housed in a 16-pin SOIC package and is intended for industrial-temperature serial-interface equipment.

An RS-232 transceiver is an interface IC that translates between complementary TTL/CMOS logic levels and the bipolar voltage levels used by RS-232 links. The MAX232 family combines driver, receiver, and charge-pump circuitry in one package, reducing the number of components required for a conventional asynchronous serial port. Its integrated charge pump generates the positive and negative voltages needed to transmit RS-232 signals from a single 5 V supply.

The MAX232IDWRG4 provides two drivers and two receivers, supporting two RS-232 channels when each driver is paired with one receiver. It supports communication rates up to 120 kbit/s, accepts receiver input levels down to -30 V, and operates from one 5 V supply. Four external 1.0 uF charge-pump capacitors are used with the integrated voltage converter. Typical supply current is 8 mA.

Each receiver includes the input protection required for handling RS-232 bipolar voltages, while the driver stage provides the voltage swing expected by RS-232 equipment. The MAX232IDWRG4 is specified for industrial temperature operation from -40 C to +85 C and is available in a 16-pin SOIC package. Its eight signal pins divide into four driver inputs, four driver outputs, four receiver inputs, and four receiver outputs.

Typical uses include industrial serial consoles, data-acquisition equipment, test and measurement instruments, printer interfaces, and embedded systems that require a compact RS-232 port. Because the transceiver operates from a single 5 V rail, it can be paired directly with 5 V microcontrollers and programmable logic devices without a separate negative supply for the RS-232 interface.

When laying out a MAX232IDWRG4 circuit, place the four 1.0 uF charge-pump capacitors close to their associated pins and route the RS-232 connector interface away from sensitive analog and high-speed digital traces. Confirm signal polarity, grounding, and logic levels before connecting the board to another RS-232 system. The device supports 120 kbit/s operation, but cable length, termination, connector quality, and the remote system must also satisfy the requirements of the intended RS-232 application.

This product page combines the manufacturer specifications with practical interface-design guidance, verified drop-in alternatives, application-oriented circuit roles, and a parameter comparison for faster component selection.

Аналоги без доработки для MAX232IDWRG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX232IDWRG4 (тот же форм-фактор и посадочное место) — отличается по Package, Data Rate, ESD Protection, Supply Voltage, Interface Standard.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Data Rate: 200 kbps
Supply Voltage: 4.5 V to 5.5 V
Сравнить с MAX232IDWRG4 →
Texas Instruments
Data Rate: 120 kbit/s
ESD Protection: ±2 kV
Interface Standard: TIA/EIA-232-F and ITU Recommendation V.28
Сравнить с MAX232IDWRG4 →
Analog Devices
Package: 16-pin narrow SOIC
ESD Protection: 15 kV
Supply Voltage: +5 V
Сравнить с MAX232IDWRG4 →

MAX232DW

✅ Прямая замена
Texas Instruments
📦 16-pin SOIC
Dual RS-232 driver/receiver with capacitive voltage generator · 2 · 2 · 120 kbit/s · 5 V · 4.5 V to 5.5 V · Approximately ±9 V · ±30 V

Уточнить цену

Открыть даташит →

MAX232IDW

✅ Прямая замена
Texas Instruments
📦 16-pin SOIC
2/2 dual driver and receiver · 2 · 2 · 120 kbps · 5 V · 4.5 V to 5.5 V · ±9 V · ±30 V

Уточнить цену

Открыть даташит →

MAX232CDW

✅ Прямая замена ⚠️ Характеристики не проверены
📦 16-pin SOIC
5 V supply and 120 kbit/s match; commercial temperature grade has a 15 C lower minimum rating than the -40 C target minimum

📋 Справочный аналог (нет в каталоге)

MAX232EESE+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

Уточнить цену

Открыть даташит →

MAX232ACSE+T

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Уточнить цену

Открыть даташит →

MAX232IDWRG4 Характеристики

Device Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Скорость передачи данных Up to 120 kbit/s
Напряжение питания 5 V
Number of Supply Inputs 1
Charge-Pump Capacitor Value 1.0 uF
Typical Supply Current 8 mA
Receiver Input Levels -30 V to +30 V
ESD Protection Human-body-model protection exceeding 2000 V
Рабочая температура -40 C to +85 C
Temperature Grade Industrial
Корпус 16-pin SOIC
Package Terminal Count 16
Тип монтажа Surface mount

Руководство по цоколевке MAX232IDWRG4 в корпусе 16

Цоколевка для MAX232IDWRG4 (корпус 16). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16 для MAX232IDWRG4

Нет подробных данных о распиновке для MAX232IDWRG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX232IDWRG4 подходит для 6 применениеs: Industrial Serial Console, Data-Acquisition Equipment, Test and Measurement Instruments, Embedded Controller Communication, Printer and Peripheral Interface, Network Equipment Management Port.

🏭

Industrial Serial Console

The MAX232IDWRG4 fits an industrial serial console because it combines two RS-232 drivers and two receivers with operation from a single 5 V supply. A console link can use one driver and one receiver pair while leaving the second channel available for a second peripheral or diagnostic connection. The 120 kbit/s maximum data rate supports common asynchronous console traffic, while the -40 C to +85 C rating covers industrial environments. Place the four 1.0 uF charge-pump capacitors close to their pins and route the connector-side traces away from sensitive digital circuitry to reduce coupling.

📡

Data-Acquisition Equipment

The MAX232IDWRG4 is suitable for connecting laboratory or field data-acquisition equipment to a legacy RS-232 controller. Two driver and receiver channels allow communication and handshake signals to share one compact interface IC, while the single 5 V rail simplifies connection to modern control logic. The 120 kbit/s rate is suitable for command traffic and moderate data transfers. Use the receiver input capability down to -30 V to accommodate bipolar RS-232 signals, and keep the cable-side network physically separated from sensitive analog measurement circuitry.

🔧

Test and Measurement Instruments

A MAX232IDWRG4-based RS-232 port can provide simple host-computer control for oscilloscopes, programmable supplies, and bench instruments that retain legacy serial interfaces. The device’s two transmitters and two receivers support both command traffic and hardware-control signals without requiring a separate negative supply. Its 120 kbit/s limit accommodates many low-speed instrument-control protocols, and its 16-pin SOIC package simplifies assembly in compact equipment. Confirm the instrument’s logic polarity, flow-control requirements, connector wiring, and maximum cable length before finalizing the interface.

🧩

Embedded Controller Communication

The MAX232IDWRG4 can bridge a 5 V embedded controller to an RS-232 network when a legacy peripheral requires bipolar serial signaling. The integrated charge pump derives the required positive and negative line voltages from one 5 V rail, avoiding a separate negative-supply circuit. The 120 kbit/s maximum rate accommodates many command and status protocols, while the 16-pin SOIC footprint supports compact controller boards. Use one channel for transmit and the other for receive when hardware flow control is unnecessary, and ensure the microcontroller levels match the MAX232 logic-side inputs and outputs.

🖨️

Printer and Peripheral Interface

The MAX232IDWRG4 provides a compact interface for printers, scanners, and legacy peripherals that use RS-232 rather than USB or Ethernet. Its two drivers and two receivers allow bidirectional communication plus additional status or flow-control signals when required. Operation from a single 5 V rail reduces supply complexity, and 120 kbit/s is suitable for many peripheral-control protocols. The design should verify the peripheral’s connector pinout, logic polarity, handshake timing, and cable requirements. Adequate grounding and protection at the connector are also important when the linked equipment sits on a different power source.

🌐

Network Equipment Management Port

The MAX232IDWRG4 can implement an RS-232 management connection on equipment that retains a console or out-of-band management interface. The two-channel arrangement supports a primary management link and a secondary status channel, while single 5 V operation is convenient for line cards and embedded modules. The 120 kbit/s rate is sufficient for many command-based management protocols, and the industrial temperature range supports controlled equipment rooms or industrial enclosures. Use separate protection or filtering at externally accessible connectors, and avoid routing RS-232 cable-side traces beneath sensitive clock or analog circuitry.

What is the MAX232IDWRG4?
The MAX232IDWRG4 is a Texas Instruments dual RS-232 transceiver containing two line drivers and two line receivers. According to the Texas Instruments MAX232IDWRG4 datasheet, it operates from a single 5 V supply, supports data rates to 120 kbit/s, and uses four external 1.0 uF capacitors for its integrated charge-pump function. It is packaged for surface-mount assembly in a 16-pin SOIC.
What are the key specifications of MAX232IDWRG4 that engineers should know?
The key MAX232IDWRG4 specifications are two drivers, two receivers, 5 V single-supply operation, and a maximum data rate of 120 kbit/s. The Texas Instruments MAX232IDWRG4 datasheet also specifies typical supply current of 8 mA, receiver input handling down to -30 V, four 1.0 uF charge-pump capacitors, an industrial temperature range of -40 C to +85 C, and a 16-pin SOIC package.
Where can I download the MAX232IDWRG4 datasheet PDF?
The MAX232IDWRG4 datasheet PDF can be accessed through the listed Texas Instruments document link at Alldatasheet. The manufacturer document identifies the part as a dual EIA-232 driver and receiver and describes its charge-pump, data-rate, supply, temperature, and protection characteristics. Use the pin-description table and application information in that document when assigning connector signals and laying out the PCB.
Where can I find the MAX232IDWRG4 pinout?
The MAX232IDWRG4 uses a 16-pin SOIC package, but a complete numbered pin table is not reproduced on this page. Use the pin-description table in the Texas Instruments MAX232IDWRG4 datasheet when wiring the device. In particular, distinguish TTL/CMOS-side driver inputs and receiver outputs from RS-232-side driver outputs and receiver inputs, and identify the charge-pump capacitor pins according to the manufacturer diagram.
Can MAX232IDWRG4 operate from a single 5 V supply?
Yes, the MAX232IDWRG4 operates from a single 5 V supply and uses an integrated charge pump to develop the bipolar voltage levels required by the RS-232 drivers. According to the Texas Instruments MAX232IDWRG4 datasheet, the charge pump requires four external 1.0 uF capacitors. This arrangement avoids a separate negative supply while retaining bipolar RS-232 line-driver capability.
What is the maximum data rate of MAX232IDWRG4?
The MAX232IDWRG4 supports RS-232 communication rates up to 120 kbit/s. The Texas Instruments MAX232IDWRG4 datasheet states the maximum operating speed as 120 kbit/s, making the device suitable for asynchronous equipment links that operate below that limit. Actual throughput also depends on cable characteristics, grounding, connector layout, and the capabilities of the connected RS-232 equipment.
What can replace the MAX232IDWRG4?
The MAX232DW and MAX232IDW are pin-to-pin SOIC-16 options for the MAX232IDWRG4, while MAX232EESE+ and MAX232ACSE+ are also identified as compatible MAX232-family alternatives. The Texas Instruments MAX232IDWRG4 datasheet establishes the target’s two-driver, two-receiver, 5 V architecture. Confirm temperature grade, ESD rating, package width, capacitor values, and connector-level requirements before approving a substitute.
Is MAX232IDWRG4 the same as MAX232DW?
The MAX232DW is a pin-compatible MAX232-family alternative, but it is not identical in temperature grade to the MAX232IDWRG4. The MAX232IDWRG4 is identified as an industrial-temperature part rated from -40 C to +85 C, whereas the MAX232DW is the commercial-temperature variant. Both use the dual-driver, dual-receiver, 5 V RS-232 architecture and a 16-pin SOIC footprint, but the ambient-temperature requirement determines whether the swap is acceptable.
What is the best Analog Devices equivalent for MAX232IDWRG4?
The MAX232EESE+ from Analog Devices is a dual RS-232 transceiver option identified in the cross-reference results, but it must be checked for package and environmental compatibility before substitution. Both families provide two drivers, two receivers, single-supply operation, and an integrated charge pump. Engineers should compare the exact SOIC outline, temperature range, ESD level, capacitor connection, and RS-232 performance in each manufacturer datasheet.
When should I choose MAX232IDWRG4 over MAX232DW?
Choose the MAX232IDWRG4 when the assembly must operate across the industrial range of -40 C to +85 C. The MAX232DW is a pin-to-pin commercial-temperature alternative and can suit equipment specified only for a narrower environment. For either device, verify the complete SOIC footprint, external capacitor values, logic-level compatibility, and required RS-232 line performance against the schematic and PCB layout.
Is MAX232IDWRG4 suitable for an industrial serial console?
Yes, the MAX232IDWRG4 suits an industrial serial console when the console uses a standard RS-232 port and operates within -40 C to +85 C. Its two drivers and two receivers support two channels, while the 120 kbit/s limit is appropriate for many console and configuration links. The design must also provide 5 V power, four 1.0 uF charge-pump capacitors, correct logic-level interfacing, and suitable RS-232 connector protection.
How do MAX232IDWRG4 and MAX232IDW differ?
The MAX232IDWRG4 and MAX232IDW represent the same MAX232ID device architecture in 16-pin SOIC packaging, with the G4 suffix identifying the orderable packaging configuration. Their core electrical functions are two RS-232 drivers, two receivers, single 5 V operation, 120 kbit/s operation, and four 1.0 uF charge-pump capacitors. When substituting, compare the exact manufacturer order codes and mechanical drawings rather than relying only on the base MPN.
What design details matter when using MAX232IDWRG4?
The critical design details are charge-pump capacitor placement, logic-side versus cable-side signal routing, connector protection, and grounding. According to the Texas Instruments MAX232IDWRG4 datasheet, four 1.0 uF capacitors support the charge pump. Place them close to the associated device pins, keep the RS-232 traces away from sensitive circuitry, and confirm that the remote equipment uses compatible signal polarity and levels.
How much power does the MAX232IDWRG4 consume?
The MAX232IDWRG4 has a typical supply current of 8 mA when operating from its single 5 V supply. The Texas Instruments MAX232IDWRG4 datasheet lists this typical current value for the device; actual board consumption can vary with channel activity, external circuitry, and the connected interface. Designers should also account for the charge-pump capacitor ripple when evaluating the complete power-supply budget.
Where can I buy MAX232IDWRG4 and what is its lead time?
Use the Request a Quote form on this page to ask about MAX232IDWRG4 availability, current lead time, order quantity, and delivery requirements. The product is a Texas Instruments 16-pin SOIC device with an industrial temperature range. Current commercial details should be confirmed through the quote process because inventory and lead time can change without changing the component specification.

Справочные инженерные данные для MAX232IDWRG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX232IDWRG4 for a 16-pin SOIC design that needs two RS-232 drivers, two receivers, one 5 V supply, and operation from -40 C to +85 C. Its 120 kbit/s data-rate limit and four 1.0 uF charge-pump capacitors make it appropriate for conventional asynchronous control and data links. MAX232DW is appropriate when a commercial-temperature 0 C to +70 C design is sufficient. MAX232IDW offers the closest Texas Instruments ordering match, subject to confirmation of the exact suffix and mechanical drawing. MAX232EESE+ and MAX232ACSE+ provide alternative sourcing from Analog Devices, but engineers should compare ESD ratings, temperature limits, package width, charge-pump topology, and capacitor values before approval. For every option, verify logic polarity, connector wiring, grounding, protection, and the remote device’s protocol.

Сравнение с аналогами

Параметр Этот товар MAX232DW MAX232IDW MAX232CDW MAX232EESE+ MAX232ACSE+
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Operating Temperature -40 C to +85 C 0 C to +70 C -40 C to +85 C 0 C to +70 C -40 C to +85 C -40 C to +85 C

Ключевые отличия

  • Full industrial temperature coverage (против MAX232DW)
  • Four-channel RS-232 integration (против MAX232ACSE+)
  • 120 kbit/s single-supply operation (против MAX232EESE+)

Заметки по проектированию

Place the four required 1.0 uF charge-pump capacitors close to their associated MAX232IDWRG4 pins. Keep each capacitor’s connection path short and follow the capacitor configuration shown in the Texas Instruments datasheet. A long or looped capacitor connection can increase charge-pump loop area and allow switching energy to couple into nearby logic or analog signals.

Separate the logic-side nets from the RS-232 connector-side nets in the PCB layout. Route driver outputs toward the protected connector circuit and receiver inputs away from clocks, sensors, and sensitive analog inputs. Maintain a clear return-current path and use a suitable chassis or signal-ground strategy at the connector to reduce common-mode noise and ground-potential problems.

Do not interchange the logic-side and cable-side pins. Driver inputs and receiver outputs connect to controller logic, while driver outputs and receiver inputs connect to RS-232 lines. Verify that the MAX232IDWRG4 voltage levels match the controller, confirm signal polarity at both ends, and check whether the remote equipment requires hardware flow control. The device’s 120 kbit/s rating does not override connector, cable, or grounding limitations.

The typical supply current of the MAX232IDWRG4 is 8 mA, but the complete circuit also includes the charge-pump capacitor current and connected logic loads. Provide a stable 5 V rail with adequate transient capability and place local supply bypassing close to the device pins. If the same supply feeds switching converters or motors, isolate noisy current paths and maintain adequate filtering between those loads and the RS-232 interface.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The industrial-temperature MAX232IDWRG4 is not identified as an automotive-qualified AEC-Q100 variant. Compliance declarations for RoHS, REACH, lead-free construction, halogen-free construction, and conflict minerals were not identified and must be confirmed using the manufacturer product documentation.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX232IDWRG4 datasheet MAX232IDWRG4 datasheet pdf MAX232IDWRG4 pinout MAX232IDWRG4 specifications MAX232IDWRG4 equivalent MAX232IDWRG4 replacement MAX232IDWRG4 drop-in replacement MAX232IDWRG4 vs MAX232DW Texas Instruments MAX232IDWRG4 MAX232IDWRG4 RS-232 transceiver MAX232IDWRG4 application circuit MAX232IDWRG4 price MAX232IDWRG4 stock 16 pin SOIC RS-232 transceiver 120 kbit/s dual RS-232 transceiver

Связанные компоненты & термины

Texas Instruments MAX232IDWRG4 MAX232 MAX232DW MAX232IDW MAX232CDW MAX232EESE+ MAX232ACSE+ Analog Devices RS-232 transceiver RS-232 driver RS-232 receiver line transceiver interface IC EIA-232 charge pump single 5 V supply 120 kbit/s 1.0 uF capacitor 16-pin SOIC surface mount industrial temperature grade ESD protection serial interface
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ