MAX232IDWRG4 - Dual RS-232 Transceiver | Texas Instruments
MPN: MAX232IDWRG4 ✓ সক্রিয়MAX232IDWRG4 সারাংশ
An RS-232 transceiver is an interface IC that translates between complementary TTL/CMOS logic levels and the bipolar voltage levels used by RS-232 links. The MAX232 family combines driver, receiver, and charge-pump circuitry in one package, reducing the number of components required for a conventional asynchronous serial port. Its integrated charge pump generates the positive and negative voltages needed to transmit RS-232 signals from a single 5 V supply.
The MAX232IDWRG4 provides two drivers and two receivers, supporting two RS-232 channels when each driver is paired with one receiver. It supports communication rates up to 120 kbit/s, accepts receiver input levels down to -30 V, and operates from one 5 V supply. Four external 1.0 uF charge-pump capacitors are used with the integrated voltage converter. Typical supply current is 8 mA.
Each receiver includes the input protection required for handling RS-232 bipolar voltages, while the driver stage provides the voltage swing expected by RS-232 equipment. The MAX232IDWRG4 is specified for industrial temperature operation from -40 C to +85 C and is available in a 16-pin SOIC package. Its eight signal pins divide into four driver inputs, four driver outputs, four receiver inputs, and four receiver outputs.
Typical uses include industrial serial consoles, data-acquisition equipment, test and measurement instruments, printer interfaces, and embedded systems that require a compact RS-232 port. Because the transceiver operates from a single 5 V rail, it can be paired directly with 5 V microcontrollers and programmable logic devices without a separate negative supply for the RS-232 interface.
When laying out a MAX232IDWRG4 circuit, place the four 1.0 uF charge-pump capacitors close to their associated pins and route the RS-232 connector interface away from sensitive analog and high-speed digital traces. Confirm signal polarity, grounding, and logic levels before connecting the board to another RS-232 system. The device supports 120 kbit/s operation, but cable length, termination, connector quality, and the remote system must also satisfy the requirements of the intended RS-232 application.
This product page combines the manufacturer specifications with practical interface-design guidance, verified drop-in alternatives, application-oriented circuit roles, and a parameter comparison for faster component selection.
এর জন্য ড্রপ-ইন বিকল্প MAX232IDWRG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX232IDWRG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Data Rate, ESD Protection, Supply Voltage, Interface Standard.
MAX232DW
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX232IDW
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX232CDW
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX232EESE+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX232ACSE+T
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX232IDWRG4 বিশেষণ
| Device Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| ডেটা রেট | Up to 120 kbit/s |
| সাপ্লাই ভোল্টেজ | 5 V |
| Number of Supply Inputs | 1 |
| Charge-Pump Capacitor Value | 1.0 uF |
| Typical Supply Current | 8 mA |
| Receiver Input Levels | -30 V to +30 V |
| ESD Protection | Human-body-model protection exceeding 2000 V |
| অপারেটিং তাপমাত্রা | -40 C to +85 C |
| Temperature Grade | Industrial |
| প্যাকেজ | 16-pin SOIC |
| Package Terminal Count | 16 |
| মাউন্টিং টাইপ | Surface mount |
MAX232IDWRG4 16 পিন কনফিগারেশন গাইড
MAX232IDWRG4 (16 প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX232IDWRG4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX232IDWRG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Console, Data-Acquisition Equipment, Test and Measurement Instruments, Embedded Controller Communication, Printer and Peripheral Interface, Network Equipment Management Port.
Industrial Serial Console
The MAX232IDWRG4 fits an industrial serial console because it combines two RS-232 drivers and two receivers with operation from a single 5 V supply. A console link can use one driver and one receiver pair while leaving the second channel available for a second peripheral or diagnostic connection. The 120 kbit/s maximum data rate supports common asynchronous console traffic, while the -40 C to +85 C rating covers industrial environments. Place the four 1.0 uF charge-pump capacitors close to their pins and route the connector-side traces away from sensitive digital circuitry to reduce coupling.
সুপারিশকৃত
Data-Acquisition Equipment
The MAX232IDWRG4 is suitable for connecting laboratory or field data-acquisition equipment to a legacy RS-232 controller. Two driver and receiver channels allow communication and handshake signals to share one compact interface IC, while the single 5 V rail simplifies connection to modern control logic. The 120 kbit/s rate is suitable for command traffic and moderate data transfers. Use the receiver input capability down to -30 V to accommodate bipolar RS-232 signals, and keep the cable-side network physically separated from sensitive analog measurement circuitry.
সুপারিশকৃত
Test and Measurement Instruments
A MAX232IDWRG4-based RS-232 port can provide simple host-computer control for oscilloscopes, programmable supplies, and bench instruments that retain legacy serial interfaces. The device’s two transmitters and two receivers support both command traffic and hardware-control signals without requiring a separate negative supply. Its 120 kbit/s limit accommodates many low-speed instrument-control protocols, and its 16-pin SOIC package simplifies assembly in compact equipment. Confirm the instrument’s logic polarity, flow-control requirements, connector wiring, and maximum cable length before finalizing the interface.
সুপারিশকৃত
Embedded Controller Communication
The MAX232IDWRG4 can bridge a 5 V embedded controller to an RS-232 network when a legacy peripheral requires bipolar serial signaling. The integrated charge pump derives the required positive and negative line voltages from one 5 V rail, avoiding a separate negative-supply circuit. The 120 kbit/s maximum rate accommodates many command and status protocols, while the 16-pin SOIC footprint supports compact controller boards. Use one channel for transmit and the other for receive when hardware flow control is unnecessary, and ensure the microcontroller levels match the MAX232 logic-side inputs and outputs.
সুপারিশকৃত
Printer and Peripheral Interface
The MAX232IDWRG4 provides a compact interface for printers, scanners, and legacy peripherals that use RS-232 rather than USB or Ethernet. Its two drivers and two receivers allow bidirectional communication plus additional status or flow-control signals when required. Operation from a single 5 V rail reduces supply complexity, and 120 kbit/s is suitable for many peripheral-control protocols. The design should verify the peripheral’s connector pinout, logic polarity, handshake timing, and cable requirements. Adequate grounding and protection at the connector are also important when the linked equipment sits on a different power source.
সুপারিশকৃত
Network Equipment Management Port
The MAX232IDWRG4 can implement an RS-232 management connection on equipment that retains a console or out-of-band management interface. The two-channel arrangement supports a primary management link and a secondary status channel, while single 5 V operation is convenient for line cards and embedded modules. The 120 kbit/s rate is sufficient for many command-based management protocols, and the industrial temperature range supports controlled equipment rooms or industrial enclosures. Use separate protection or filtering at externally accessible connectors, and avoid routing RS-232 cable-side traces beneath sensitive clock or analog circuitry.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX232IDWRG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX232DW | MAX232IDW | MAX232CDW | MAX232EESE+ | MAX232ACSE+ |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Transceiver Configuration | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers | 2 drivers and 2 receivers |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40 C to +85 C | 0 C to +70 C | -40 C to +85 C | 0 C to +70 C | -40 C to +85 C | -40 C to +85 C |
মূল পার্থক্যসমূহ
- Full industrial temperature coverage (বনামMAX232DW)
- Four-channel RS-232 integration (বনামMAX232ACSE+)
- 120 kbit/s single-supply operation (বনামMAX232EESE+)
ডিজাইন নোট
Place the four required 1.0 uF charge-pump capacitors close to their associated MAX232IDWRG4 pins. Keep each capacitor’s connection path short and follow the capacitor configuration shown in the Texas Instruments datasheet. A long or looped capacitor connection can increase charge-pump loop area and allow switching energy to couple into nearby logic or analog signals.
Separate the logic-side nets from the RS-232 connector-side nets in the PCB layout. Route driver outputs toward the protected connector circuit and receiver inputs away from clocks, sensors, and sensitive analog inputs. Maintain a clear return-current path and use a suitable chassis or signal-ground strategy at the connector to reduce common-mode noise and ground-potential problems.
Do not interchange the logic-side and cable-side pins. Driver inputs and receiver outputs connect to controller logic, while driver outputs and receiver inputs connect to RS-232 lines. Verify that the MAX232IDWRG4 voltage levels match the controller, confirm signal polarity at both ends, and check whether the remote equipment requires hardware flow control. The device’s 120 kbit/s rating does not override connector, cable, or grounding limitations.
The typical supply current of the MAX232IDWRG4 is 8 mA, but the complete circuit also includes the charge-pump capacitor current and connected logic loads. Provide a stable 5 V rail with adequate transient capability and place local supply bypassing close to the device pins. If the same supply feeds switching converters or motors, isolate noisy current paths and maintain adequate filtering between those loads and the RS-232 interface.
কমপ্লায়েন্স তথ্য
The industrial-temperature MAX232IDWRG4 is not identified as an automotive-qualified AEC-Q100 variant. Compliance declarations for RoHS, REACH, lead-free construction, halogen-free construction, and conflict minerals were not identified and must be confirmed using the manufacturer product documentation.