Analog Devices

MAX3243ECAI+T - 3/5 RS-232 Transceiver, 15kV ESD | Analog Devices

部品番号: MAX3243ECAI+T ✓ 生産中
3.0V to 5.5V Vdss 1µA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243ECAI+T 概要

The Analog Devices MAX3243ECAI+T is a 3-driver, 5-receiver RS-232 transceiver operating from 3.0V to 5.5V, supporting data rates up to 250kbps and providing ±15kV ESD protection on serial-port pins. The device is packaged in a 28-pin SSOP and includes AutoShutdown and automatic wake-up functions to reduce supply current when no valid receiver activity is detected.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and RS-232 differential line drivers and receivers. The MAX3243 belongs to the hierarchy of interface ICs, serial-interface transceivers, RS-232 communications devices, and semiconductors. It allows a modern low-voltage controller to communicate with legacy RS-232 equipment without requiring external ±12V power rails.

The MAX3243 integrates three RS-232 line drivers, five receivers, and a dual charge-pump circuit. Its 3.0V-to-5.5V single-supply operation supports both 3.3V and 5V systems. An internal charge pump generates the bipolar voltage required by RS-232 transmitters, while enhanced electrostatic-discharge protection improves resilience when cables are connected to external equipment. The E suffix identifies the enhanced ESD version, and the CAI suffix denotes the 28-pin SSOP configuration with a commercial temperature grade.

Automatic shutdown is a significant benefit in portable and low-power equipment. According to the manufacturer product page, the MAX3243 can reach a 1µA supply current when AutoShutdown is active and no valid signal appears at the receiver inputs. The device can wake automatically when receiver activity resumes, or shutdown can be controlled in software, allowing the interface to remain transparent to normal serial-port operation.

Typical uses include industrial serial adapters, point-of-sale equipment, data-acquisition systems, test instrumentation, and embedded controllers that must connect to RS-232 peripherals. Three drivers allow transmission on as many as three lines, while five receivers support monitoring of five incoming signals. The 250kbps capability exceeds the speed required by many legacy serial protocols and is useful for short-distance point-to-point links.

PCB design should keep charge-pump and high-voltage driver traces away from sensitive receiver and logic-ground paths. Place the required bypass capacitors close to their supply and ground pins, route connector-side signals according to the manufacturer pinout, and provide chassis grounding or surge-protection components where cables leave the enclosure. Confirm the receiver's active polarity and AutoShutdown timing in firmware before replacing a conventional RS-232 implementation.

This product record combines the manufacturer specifications, exact-package identification, lifecycle information, sourcing context, and drop-in alternatives with practical guidance for layout, power management, and signal-integrity review.

ドロップイン代替品: MAX3243ECAI+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3243ECAI+T (同一形状・フットプリント) — 相違点: Product Type, ESD Protection, Supply Voltage Range, Interface Standard, Package.

Analog Devices
Product Type: RS-232 interface transceiver
ESD Protection: +/-15 kV
Supply Voltage Range: 3 V to 5.5 V
比較対象 MAX3243ECAI+T →
Maxim Integrated
Product Type: 3/5 RS-232 transceiver
Interface Standard: EIA/TIA-232 and V.28/V.24
比較対象 MAX3243ECAI+T →
Analog Devices
Product Type: Multichannel RS-232 transceiver
ESD Protection: ±15 kV
Supply Voltage Range: 3.0 V to 5.5 V
比較対象 MAX3243ECAI+T →
Analog Devices
Product Type: RS-232 transceiver
ESD Protection: ±15kV
比較対象 MAX3243ECAI+T →

MAX3243CAI+T

✅ ドロップイン
📦 28-pin SSOP
Same 3-driver, 5-receiver MAX3243 architecture and 3.0V-to-5.5V supply; suffix-specific ESD and temperature ratings differ

📋 参考代替品(カタログ未掲載)

MAX3243EEAI+

✅ ドロップイン
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 3 channels · 5 channels · Full duplex · 3.0V to 5.5V · 250kbps · ±15kV · RS-232 / EIA/TIA-232

価格はお問い合わせください

データシートを見る →

MAX3243ECAI+

✅ ドロップイン
Maxim Integrated
📦 28-pin SSOP
3/5 RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 · 5 · EIA/TIA-232 and V.28/V.24 · Yes · Yes

価格はお問い合わせください

データシートを見る →

MAX3243ECAI+G2X

✅ ドロップイン
📦 28-pin SSOP
Same MAX3243ECAI electrical family, with a distinct customer-specific ordering code

📋 参考代替品(カタログ未掲載)

MAX3243ECAI+T 仕様

Product Type RS-232 line driver and receiver transceiver
Number of Drivers 3 drivers
Number of Receivers 5 receivers
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
ESD Protection ±15kV HBM
AutoShutdown Supply Current 1µA
Charge-Pump Circuit Dual charge pump
Interface Standard RS-232 / EIA/TIA-232
Signaling Standard V.28 / V.24
パッケージ 28-pin SSOP
Package Pin Count 28 pins
実装タイプ Surface mount
Automotive Qualification Not applicable

MAX3243ECAI+T 28 pins ピン配置ガイド

MAX3243ECAI+T (28 pins パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3243ECAI+T の 28 pins パッケージピン配置図

詳細なピン配置データはありません: MAX3243ECAI+T.

詳細は データシート をご参照ください。

主な用途

MAX3243ECAI+T の用途: 6 件s: Industrial Serial Port Interface, Point-of-Sale Terminal Connectivity, Data Acquisition and Instrumentation, Embedded Equipment Controller, Network Equipment Serial Console, Portable Measurement and Control Device.

🏭

Industrial Serial Port Interface

The MAX3243ECAI+T fits industrial controllers that must communicate with RS-232 test equipment, programmable instruments, or legacy factory peripherals. Its three drivers support multiple outbound control signals, while five receivers can monitor acknowledgements, status lines, and sensor data. Operation from 3.0V to 5.5V removes external ±12V supplies, and the integrated dual charge pump simplifies the power architecture. The ±15kV HBM protection rating strengthens the connector-side interface when cables can be handled by operators. Automatic shutdown can also reduce standby consumption when the peripheral remains idle.

🖥️

Point-of-Sale Terminal Connectivity

The MAX3243ECAI+T is appropriate for point-of-sale terminals, receipt printers, card-reader accessories, and service consoles that use RS-232 links. Three transmit channels can carry commands and data, while five receive channels provide enough monitoring points for printer status, transaction completion, and fault signaling. Its 3.3V-to-5V supply flexibility simplifies compatibility with embedded host processors. Because many peripheral ports remain idle between transactions, AutoShutdown and automatic wake-up can reduce system power without requiring the host to manage external RS-232 transceiver power rails.

🔧

Data Acquisition and Instrumentation

The MAX3243ECAI+T is suitable for data-acquisition units and laboratory instruments that expose a legacy RS-232 management port. The 250kbps maximum rate supports many short-distance control and status protocols, while five receivers allow the instrument to report multiple digital conditions to a host controller. The single 3.0V-to-5.5V supply is useful where a ±12V rail is undesirable, and the internal charge pump provides compliant RS-232 levels. Its enhanced ESD protection is valuable for bench equipment, although protective grounding and cable shielding should still follow the enclosure design.

⚡

Embedded Equipment Controller

The MAX3243ECAI+T fits embedded service equipment that must communicate with external RS-232 accessories while running from a 3.3V or 5V system rail. Three drivers permit command, configuration, and data channels, while five receivers provide flexible status monitoring. The device avoids the size and power cost of external charge-pump hardware. For equipment that spends substantial time disconnected from a cable, AutoShutdown can reduce supply demand to as little as 1µA, while receiver-triggered wake-up preserves transparent serial behavior. Firmware should allow sufficient settling time after a no-activity transition.

🌐

Network Equipment Serial Console

The MAX3243ECAI+T can provide a service or management console interface for routers, switches, and other network appliances that retain RS-232 diagnostics. Three transmit channels and five receive channels support console commands plus hardware status monitoring, and 250kbps is suitable for conventional terminal sessions. The 3.0V-to-5.5V operating range integrates readily with modern embedded processors. Automatic shutdown is advantageous for access ports that are not continuously connected, while the ±15kV HBM protection rating helps manage ESD introduced through service cables. Protect the enclosure entry and ground chassis appropriately for the installation environment.

📱

Portable Measurement and Control Device

The MAX3243ECAI+T is well suited to portable measurement and control products that communicate with external sensors, fixtures, or service tools over RS-232. The single 3.0V-to-5.5V supply is compatible with common portable-system rails, while the dual charge pump avoids external high-voltage components. Three drivers and five receivers support richer control links than a basic one-driver, one-receiver interface. When no valid receiver activity is detected, AutoShutdown can lower consumption to 1µA, extending standby time. Wake-up latency and the cable’s ground reference must be checked against the operating scenario.

What is the MAX3243ECAI+T?
The MAX3243ECAI+T is a 3.0V-to-5.5V RS-232 transceiver with three drivers, five receivers, a dual charge pump, automatic shutdown and wake-up, and ±15kV HBM ESD protection. According to the Analog Devices MAX3243 product page, it supports data rates up to 250kbps. The device is supplied in a 28-pin SSOP for surface-mounted industrial and embedded serial-interface designs.
What is the operating voltage of MAX3243ECAI+T?
The MAX3243ECAI+T operates from 3.0V to 5.5V, allowing it to interface directly with 3.3V or 5V digital controllers. The Analog Devices and Texas Instruments MAX3243 product documentation identifies the device as a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface. Its integrated charge pump produces the bipolar voltage required by the RS-232 drivers without an external ±12V supply.
How many RS-232 drivers and receivers does MAX3243ECAI+T have?
The MAX3243ECAI+T contains three RS-232 line drivers and five line receivers, plus an always-active receiver for external monitoring according to the Analog Devices family description. This channel arrangement is useful when a controller must transmit on three lines while monitoring five incoming lines. The manufacturer identifies the MAX3243 as a 3-driver, 5-receiver multichannel RS-232 interface.
What is the maximum data rate of MAX3243ECAI+T?
The MAX3243ECAI+T supports RS-232 data rates up to 250kbps. The Texas Instruments MAX3243 product page specifies a 3V-to-5.5V multichannel interface with 250kbps operation and ±15kV ESD protection. This rate is suitable for short-distance embedded, industrial, and instrumentation links, although cable length and system protocol timing must also be considered.
Does MAX3243ECAI+T require external RS-232 power supplies?
No. The MAX3243ECAI+T uses an integrated dual charge-pump circuit to generate the bipolar voltage required by the RS-232 drivers from a single 3.0V-to-5.5V supply. The Analog Devices product page identifies the charge pump as a core feature of the MAX3221, MAX3223, and MAX3243 family, eliminating the need for external +12V and -12V supplies.
What ESD protection does MAX3243ECAI+T provide?
The MAX3243ECAI+T provides ±15kV human-body-model ESD protection on the serial-port connection pins, including ground. The Texas Instruments product page identifies this protection level for the MAX3243 family. The enhanced protection is particularly relevant when the RS-232 connector is exposed to user-accessible cables, although board-level grounding and enclosure design remain important.
How does AutoShutdown reduce power consumption in MAX3243ECAI+T?
AutoShutdown disables the on-board power supply and drivers when the receiver inputs do not detect a valid signal level. According to the Analog Devices MAX3243 product page, shutdown supply current can reach 1µA, and the receiver automatically wakes the interface when signal activity returns. This behavior is useful in battery-powered and intermittently connected portable systems.
Where can I download the MAX3243ECAI+T datasheet PDF?
The manufacturer-hosted MAX3243 datasheet is available at https://www.ti.com/lit/gpn/max3243, while the Analog Devices product and support page is available at https://www.analog.com/en/products/max3243.html. Use the manufacturer documents for the complete electrical characteristics, pin descriptions, charge-pump capacitor requirements, and layout guidance before finalizing a PCB design.
Where can I find the MAX3243ECAI+T pinout?
Use the pin-description table and package drawing in the manufacturer MAX3243 datasheet for authoritative MAX3243ECAI+T pin assignments. The device uses a 28-pin SSOP, with three driver outputs, five receiver inputs, charge-pump connections, supply pins, ground pins, and control functions distributed across the package. The product page links directly to the supporting datasheet and technical resources.
What is the best drop-in replacement for MAX3243ECAI+T?
The closest same-manufacturer drop-in options identified for the MAX3243ECAI+T are the 28-pin MAX3243CAI+, MAX3243EEAI+, and MAX3243ECAI+ variants. Their suitability depends on the required ESD level, temperature grade, and tape-and-reel ordering option. A field replacement should be checked against every receiver polarity, shutdown-control connection, and capacitor value in the original design.
Can MAX3243CAI+T replace MAX3243ECAI+T?
The MAX3243CAI+T is a same-family RS-232 transceiver in the 28-pin SSOP format and can be considered for a MAX3243ECAI+T replacement after reviewing its detailed electrical ratings. The MAX3243 family supports the same core 3.0V-to-5.5V, 3-driver, 5-receiver architecture, but suffix-specific ESD, temperature, and ordering characteristics must be checked before production use.
MAX3243ECAI+T vs MAX3243CAI+T - which is better for industrial equipment?
Choose the MAX3243ECAI+T when the design specifically calls for the enhanced ESD suffix, and choose the MAX3243CAI+T when its manufacturer-rated protection and environmental characteristics satisfy the enclosure and cable requirements. Both devices belong to the MAX3243 3-driver, 5-receiver family and use a 28-pin SSOP, but final selection should compare the detailed suffix-specific ratings and operating temperature limits.
When should I choose MAX3243ECAI+T over a two-channel RS-232 transceiver?
Choose the MAX3243ECAI+T when the system needs three transmit channels and five receive channels on one 3.0V-to-5.5V supply, plus automatic low-power shutdown. A two-channel transceiver is more appropriate when only one or two RS-232 lines are required and its smaller package reduces board area. The MAX3243 provides more channel density but occupies a 28-pin SSOP footprint.
Is MAX3243ECAI+T suitable for a battery-powered serial adapter?
The MAX3243ECAI+T is suitable for a battery-powered adapter when the interface is active only intermittently. Its 3.0V-to-5.5V operating range supports low-voltage systems, and AutoShutdown can reduce supply current to 1µA when no valid receiver signal is present. Designers should still account for wake-up latency, system leakage, and the average current required during active communication.
Where can I buy MAX3243ECAI+T and what is the lead time?
Use the Request a Quote form on this page to request MAX3243ECAI+T availability, lead time, and a current quotation without relying on stale listing information. The part is identified as a 28-pin SSOP tape-and-reel orderable device. Commercial confirmation should include the exact MAX3243ECAI+T suffix, quantity, and intended shipment schedule.
What are the key specifications of MAX3243ECAI+T that engineers should know?
The key MAX3243ECAI+T specifications are a 3.0V-to-5.5V supply, three RS-232 drivers, five receivers, 250kbps maximum data rate, integrated dual charge pump, automatic shutdown and wake-up, and ±15kV HBM ESD protection. The device is packaged in a 28-pin SSOP, allowing a controller-side interface to avoid external ±12V power rails while supporting five incoming RS-232 lines.

エンジニアリング参考データ: MAX3243ECAI+T — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX3243ECAI+T when the design needs three RS-232 transmit channels, five receive channels, operation from a 3.3V or 5V rail, and ±15kV HBM ESD protection on exposed serial-port pins. Its AutoShutdown function is valuable in portable equipment or intermittently connected service ports, and the integrated dual charge pump avoids external bipolar supply circuitry. The MAX3243CAI+T is appropriate when its suffix-specific ESD and temperature ratings satisfy the product requirements. The MAX3243EEAI+ is useful when its detailed electrical and environmental ratings align with the design, while MAX3243ECAI+ is a close electrical option when its ordering format is acceptable. MAX3243ECAI+G2X may suit programs requiring that specific ordering code. For all candidates, verify receiver polarity, shutdown-control behavior, charge-pump capacitor values, and package pin assignments before production substitution.

代替品との比較

パラメータ この製品 MAX3243CAI+T MAX3243EEAI+ MAX3243ECAI+ MAX3243ECAI+G2X
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Driver Count 3 drivers 3 drivers 3 drivers 3 drivers 3 drivers
Receiver Count 5 receivers 5 receivers 5 receivers 5 receivers 5 receivers
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 250kbps 250kbps 250kbps 250kbps 250kbps
Charge-Pump Architecture Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump

主な差別化要因

  • Three-driver, five-receiver channel density (vs MAX3232IPWR)
  • Enhanced ESD protection for connector-side pins (vs MAX3243CAI+T)
  • Automatic low-power shutdown and wake-up (vs MAX3243EEAI+)
  • No external bipolar RS-232 supply required (vs MAX3243ECAI+G2X)

設計ノート

Decouple the 3.0V-to-5.5V supply at the MAX3243ECAI+T power pins and connect the required charge-pump capacitors exactly as specified in the manufacturer datasheet. Keep these components close to their associated pins to limit supply ripple and charge-pump disturbance. Verify the capacitor voltage ratings, polarity, and effective capacitance tolerance over temperature; incorrect values can impair driver amplitude or wake-up behavior.

Separate charge-pump and driver-current paths from receiver inputs and controller-side logic. Use the manufacturer package outline and pin-description table when assigning PCB tracks, and keep the connector-side interface path compact. Avoid routing driver outputs beneath sensitive analog or low-level logic sections, and provide a continuous ground reference between the transceiver and the external RS-232 connector.

Do not assume that every MAX3243 ordering suffix is an exact production substitute without checking temperature grade, ESD rating, and reel or tube packaging. For MAX3243CAI+T, MAX3243EEAI+, MAX3243ECAI+, and MAX3243ECAI+G2X, compare the ordering tables and pin descriptions before substitution. Also confirm AutoShutdown polarity, receiver enable state, and charge-pump capacitor values to avoid communication failures after replacement.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The device is a commercial RS-232 interface IC. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product or material declaration.

データ検証日: 2026-11-17 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3243ECAI+T datasheet MAX3243ECAI+T pinout MAX3243ECAI+T datasheet pdf MAX3243ECAI+T equivalent MAX3243ECAI+T replacement MAX3243ECAI+T cross reference MAX3243ECAI+T vs MAX3243CAI+T MAX3243ECAI+T price MAX3243ECAI+T stock Analog Devices MAX3243ECAI+T MAX3243ECAI+T SSOP-28 MAX3243ECAI+T RS-232 interface

関連部品&用語

Analog Devices MAX3243ECAI+T MAX3243CAI+T MAX3243EEAI+ MAX3243ECAI+ MAX3243ECAI+G2X MAX3232IPWR MAX3232ECDR MAX232EIPWR RS-232 transceiver RS-232 line driver RS-232 receiver interface IC serial communications IC EIA/TIA-232 V.28 V.24 AutoShutdown dual charge pump 3.0V to 5.5V supply 250kbps data rate ±15kV HBM ESD protection 28-pin SSOP surface-mount package
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示