MC908AZ60ACFUER - 8-Bit HC08 MCU, 60KB Flash, 64-QFP | NXP
部品番号: MC908AZ60ACFUER ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $19.17 | $19.17 |
| 10 | $17.5 | $175.00 |
| 100 | $15.2 | $1,520.00 |
| 500 | $13.4 | $6,700.00 |
| 1,000 | $11.95 | $11,950.00 |
MC908AZ60ACFUER 概要
What is an HC08 microcontroller? The HC08 (or M68HC08) is Freescale/NXP's family of 8-bit microcontrollers that succeeded the original 68HC05 line. The HC08 is a CISC architecture using an enhanced CPU08 core with 16-bit internal index/accumulator operations, a 64KB linear address space, and broad peripheral integration. HC08 devices sit within the broader taxonomy: microcontroller unit (MCU) -> 8-bit MCU -> HC08 family -> HC08AS/AZ automotive sub-family, and remain in service for cost-sensitive automotive body and chassis applications.
Key features include 60KB (60K x 8) FLASH program memory, 2KB EEPROM, 1KB on-chip RAM, an 8-channel 8-bit ADC, two timer/PWM modules, CAN 2.0A/B interface, SCI (UART), and SPI. The 64-pin QFP (14x14 mm) package offers generous I/O count for body-control and instrument-cluster designs. According to the manufacturer datasheet, the part operates over -40C to +125C and is qualified to AEC-Q100 for automotive applications.
The HC08AS/AZ family uses the same CPU08 instruction set as the rest of the HC08 line, providing upward-compatible firmware development with other family members. The on-chip FLASH allows in-application reprogramming via the standard NXP monitor ROM, simplifying field updates. Internal RC oscillator and PLL options reduce external component count. The 5V supply rail matches conventional automotive body controllers.
Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, industrial sensor hubs, and CAN node endpoints. The integrated CAN 2.0B controller makes the part particularly well suited to distributed in-vehicle networks where multiple ECUs communicate on a single CAN bus.
When designing with this device, ensure the monitor ROM is properly invoked during in-system programming by holding the IRQ pin low at reset. Decouple VDD/VSS with 100nF ceramic capacitors placed within 5mm of each supply pin, and provide a stable 5V rail capable of sourcing 50mA plus I/O sink current.
This page synthesizes distributor inventory, parametric alternatives, and practical design notes not found in the manufacturer datasheet, including same-family AZ/AS part variations and the most common engineering pitfalls for HC08 firmware developers.
ドロップイン代替品: MC908AZ60ACFUER — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC908AZ60ACFUER （同一形状・フットプリント） — 相違点: ADC, RAM Size, Program Memory Size, Architecture, Number of I/O.
クイック比較ツール — 並列比較する代替部品を選択:
MC908AZ60ACFUE
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC908AB32CFUE
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC908AP64CFBE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC908MR32VFUE
✅ ドロップイン✓ 在庫あり
$14.95 / 個
データシートを見る →MC908LK24CFUE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC908AZ60ACFUER 最大定格＆電気的特性
| Core Processor | HC08 (CPU08) |
| Core Size | 8-bit |
| 最大クロック周波数 | 8.4 MHz |
| Program Memory Size | 60 KB (60K x 8) FLASH |
| EEPROM Size | 2 KB |
| RAM Size | 1 KB |
| 電源電圧 | 5 V (4.5V to 5.5V) |
| 動作温度 | -40C to +125C |
| パッケージ | 64-QFP (14x14 mm) |
| 実装タイプ | Surface Mount |
| Connectivity | CAN, SCI, SPI |
| ADC | 8-bit, 8 channels |
| Timers | 2 x 16-bit timer/PWM modules |
| AEC-Q100 | Qualified (automotive grade) |
| RoHS ステータス | Compliant |
| MSLレベル | 3 (per distributor listing) |
MC908AZ60ACFUER ピン構成
| ピン 1 | IRQ — External interrupt / monitor mode entry |
| ピン 2 | PTB0 — Port B I/O bit 0 |
| ピン 3 | PTB1 — Port B I/O bit 1 |
| ピン 4 | VSS — Ground |
| ピン 5 | VDD — 5V supply |
| ピン 6 | PTB2 — Port B I/O bit 2 |
| ピン 7 | PTB3 — Port B I/O bit 3 |
| ピン 8 | PTA0 — Port A I/O bit 0 |
| ピン 9 | PTA1 — Port A I/O bit 1 |
| ピン 10 | PTA2 — Port A I/O bit 2 |
| ピン 11 | PTA3 — Port A I/O bit 3 |
| ピン 12 | PTA4 — Port A I/O bit 4 |
| ピン 13 | PTA5 — Port A I/O bit 5 |
| ピン 14 | PTA6 — Port A I/O bit 6 |
| ピン 15 | PTA7 — Port A I/O bit 7 |
| ピン 16 | VDD — 5V supply |
| ピン 17 | VSS — Ground |
| ピン 18 | PTC0 — Port C I/O bit 0 |
| ピン 19 | PTC1 — Port C I/O bit 1 |
| ピン 20 | PTC2 — Port C I/O bit 2 |
| ピン 21 | PTC3 — Port C I/O bit 3 |
| ピン 22 | PTC4 — Port C I/O bit 4 |
| ピン 23 | PTC5 — Port C I/O bit 5 |
| ピン 24 | PTC6 — Port C I/O bit 6 |
| ピン 25 | PTC7 — Port C I/O bit 7 |
| ピン 26 | PTD0 — Port D I/O bit 0 / CAN Tx |
| ピン 27 | PTD1 — Port D I/O bit 1 / CAN Rx |
| ピン 28 | PTD2 — Port D I/O bit 2 |
| ピン 29 | PTD3 — Port D I/O bit 3 |
| ピン 30 | PTD4 — Port D I/O bit 4 |
| ピン 31 | PTD5 — Port D I/O bit 5 |
| ピン 32 | PTD6 — Port D I/O bit 6 |
| ピン 33 | PTD7 — Port D I/O bit 7 |
| ピン 34 | PTE0 — Port E I/O bit 0 / TxD |
| ピン 35 | PTE1 — Port E I/O bit 1 / RxD |
| ピン 36 | PTE2 — Port E I/O bit 2 / SCLK |
| ピン 37 | PTE3 — Port E I/O bit 3 / MOSI |
| ピン 38 | PTE4 — Port E I/O bit 4 / MISO |
| ピン 39 | PTE5 — Port E I/O bit 5 / SS |
| ピン 40 | PTE6 — Port E I/O bit 6 |
| ピン 41 | PTE7 — Port E I/O bit 7 |
| ピン 42 | VDD — 5V supply |
| ピン 43 | VSS — Ground |
| ピン 44 | ADC0 — ADC input channel 0 |
| ピン 45 | ADC1 — ADC input channel 1 |
| ピン 46 | ADC2 — ADC input channel 2 |
| ピン 47 | ADC3 — ADC input channel 3 |
| ピン 48 | ADC4 — ADC input channel 4 |
| ピン 49 | ADC5 — ADC input channel 5 |
| ピン 50 | ADC6 — ADC input channel 6 |
| ピン 51 | ADC7 — ADC input channel 7 |
| ピン 52 | VREFH — ADC high reference |
| ピン 53 | VREFL — ADC low reference |
| ピン 54 | VDDAD — Analog supply |
| ピン 55 | VSSAD — Analog ground |
| ピン 56 | TCLK — Timer clock input |
| ピン 57 | RESET — Reset input (active low) |
| ピン 58 | PTF0 — Port F I/O bit 0 |
| ピン 59 | PTF1 — Port F I/O bit 1 |
| ピン 60 | PTF2 — Port F I/O bit 2 |
| ピン 61 | PTF3 — Port F I/O bit 3 |
| ピン 62 | OSC1 — Crystal oscillator input |
| ピン 63 | OSC2 — Crystal oscillator output |
| ピン 64 | PTF4 — Port F I/O bit 4 |
主な用途
MC908AZ60ACFUER の用途: 6 件s: Automotive Body Control Module, Instrument Cluster Controller, HVAC Control Module, Lighting Control ECU, Industrial CAN Node Endpoint, Sensor Hub Module.
Automotive Body Control Module
The MC908AZ60ACFUER is well-suited for automotive body control modules where the integrated CAN 2.0B interface connects the ECU to the in-vehicle network. The 60KB FLASH accommodates typical BCM firmware (door locks, lighting, wipers, mirror control) and the 2KB EEPROM stores configuration and diagnostic data. AEC-Q100 qualification and -40C to +125C operation match underhood and cabin environments.
おすすめ
Instrument Cluster Controller
The MC908AZ60ACFUER's 8-channel 8-bit ADC and 16-bit timer/PWM modules make it a practical choice for instrument cluster stepper-motor gauges and indicator LED drivers. The 60KB FLASH accommodates gauge logic, odometer storage in EEPROM, and CAN bus diagnostics. The 64-QFP package provides enough I/O for multiple gauge outputs while keeping the PCB compact.
おすすめ
HVAC Control Module
Climate control modules benefit from the MC908AZ60ACFUER's ADC channels for cabin temperature and blend-door position sensing, plus PWM timers for blower motor and actuator control. CAN connectivity enables integration with the vehicle's body network for shared setpoint and status data. The 60KB program memory comfortably fits typical HVAC state machines and PID control loops.
おすすめ
Lighting Control ECU
Front-lighting and signal-lighting ECUs use the MC908AZ60ACFUER for PWM dimming of LED headlamps, daytime running lights, and turn signal control. The 16-bit timer/PWM modules provide precise LED current control while the CAN interface coordinates with other lighting ECUs. AEC-Q100 qualification ensures reliable operation across automotive temperature extremes.
おすすめ
Industrial CAN Node Endpoint
Beyond automotive, the MC908AZ60ACFUER serves as a robust CAN node endpoint for industrial sensor hubs and machine controllers. The 5V supply tolerance and wide operating temperature suit factory floor environments. SPI and SCI allow sensor and operator-panel interfacing, while 60KB FLASH accommodates protocol stacks and application logic in a single chip.
おすすめ
Sensor Hub Module
Distributed sensor hubs in vehicles and machinery use the MC908AZ60ACFUER to aggregate analog and digital sensor data and publish it on the CAN bus. The 8-channel ADC reads multiple sensor inputs, while EEPROM stores calibration constants. The HC08 core's deterministic interrupt response makes timing-sensitive sensor sampling predictable.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC908AZ60ACFUER — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC908AZ60ACFUE | MC908AB32CFUE | MC908AP64CFBE | MC908MR32VFUE | MC908LK24CFUE |
|---|---|---|---|---|---|---|
| Package | 64-QFP (14x14) | 64-QFP (14x14) - same | 64-QFP (14x14) - same | 64-LQFP (10x10) - smaller footprint | 64-QFP (14x14) - same | 64-QFP (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| FLASH Memory | 60 KB | 60 KB | 32 KB | 64 KB | 32 KB | 24 KB |
| Clock Frequency | 8.4 MHz | 8.4 MHz | 8.4 MHz | 8 MHz | 8 MHz | 8 MHz |
| CAN Interface | Yes (CAN 2.0B) | Yes | Yes | No | No | No |
| AEC-Q100 | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | NRND | NRND | NRND | Active | NRND | Obsolete |
主な差別化要因
- Higher FLASH density in same QFP-64 footprint （vs MC908AB32CFUE)
- Integrated CAN 2.0B for in-vehicle networking （vs MC908AP64CFBE)
- 60KB FLASH while retaining 5V analog-friendly operation （vs MC908MR32VFUE)
- Active NRND support with AEC-Q100 still qualified （vs MC908LK24CFUE)
設計ノート
Decouple each VDD/VSS pair with a 100nF ceramic capacitor placed within 5mm of the pins; add a 10uF bulk tantalum or aluminum polymer capacitor near the package. The HC08 core draws peak current during FLASH programming; insufficient decoupling causes programming failures and erratic ADC readings. Tie all VDD pins together and all VSS pins together on the PCB for lowest ground bounce.
Hold the IRQ pin low at reset to invoke monitor mode for in-application FLASH programming via the SCI interface. Releasing IRQ before the monitor firmware stabilizes aborts programming. For production firmware, ensure the IRQ pin has a defined logic state at reset to prevent unintended monitor-mode entry.
Route the OSC1/OSC2 crystal traces with short, symmetric paths and guard them with a ground pour to minimize EMI pickup. Place the crystal within 5mm of the MCU pins and avoid routing digital signal traces underneath. For CAN bus signals, route TxD/RxD as a differential pair with 120-ohm characteristic impedance and 100nF split termination at the transceiver input.
The 64-QFP package has a thermal resistance theta_JA of approximately 50 C/W, suitable for automotive ambient environments up to +85C with modest self-heating. At maximum I/O switching load, the part dissipates under 500mW; no heatsink is required. For underhood +125C operation, derate I/O drive strength and minimize simultaneous switching outputs to limit junction temperature rise.
ADC input traces should be kept short and guarded by analog ground; the ADC reference pins (VREFH/VREFL) require a 100nF bypass plus a 1-10uF bulk capacitor for low-noise 8-bit conversions. Avoid routing ADC traces parallel to digital switching signals to prevent crosstalk. If higher resolution is needed, route the analog signal to an external 12-bit ADC over SPI.
コンプライアンス情報
RoHS and REACH compliance per distributor listings (DigiKey, Mouser, Arrow). AEC-Q100 qualified per manufacturer datasheet and Arrow's automotive qualification statement. Halogen-free status not explicitly stated in available data.