MC9S08GB60CFU - 8-Bit 40MHz HCS08 MCU 60KB Flash | NXP | 64-LQFP
部品番号: MC9S08GB60CFU ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.42 | $7.42 |
| 10 | $6.85 | $68.50 |
| 100 | $5.93 | $593.00 |
| 500 | $5.2 | $2,600.00 |
| 1,000 | $4.61 | $4,610.00 |
MC9S08GB60CFU 概要
An 8-bit microcontroller is a single-chip computer built around an 8-bit data-path CPU, ROM/Flash for program storage, RAM for working data, and a mix of timers, communication peripherals (SCI/SPI/IIC), and analog blocks. The HCS08 core is a CISC architecture descended from the Motorola/Freescale HC08, adding a background debug controller (BDC), hardware breakpoint, and improved instruction efficiency. In the broader taxonomy, the MC9S08GB60CFU sits under microcontroller -> embedded processor -> integrated circuit -> semiconductor.
Key differentiating specifications include a 40 MHz maximum bus frequency, 60 KB Flash, 4 KB RAM, an 8-channel 10-bit ADC, multiple timers (TPM1/TPM2), SCI, SPI, and IIC peripherals, plus a low-power STOP/WAIT mode with internal 1 kHz low-power oscillator for wake-up. The on-chip Flash supports in-application programming and security lock, while the integrated COP watchdog and LVD improve system reliability. The 64-LQFP package offers 56 general-purpose I/O lines and a 10 mm x 10 mm body that fits standard industrial layouts.
Technically, the device uses a 2.7 V to 5.5 V supply, an internal clock generator (ICG) with self-clocked mode at approximately 8 MHz out of reset (using the FLL for higher frequencies), and an external crystal/oscillator option. The HCS08 core executes most instructions in 1-2 bus cycles, giving effective throughput of roughly 20-40 MIPS at 40 MHz. The 10-bit ADC has 8 input channels and supports both single-ended conversion and software-triggered scan modes.
Typical applications include industrial control panels, appliance white-goods control boards (washing machines, dishwashers, microwave ovens), HVAC control modules, motor control front-ends for low-voltage BLDC drivers, building automation sensor nodes, and consumer electronic mainboards that benefit from a small footprint, low BOM cost, and proven long-term NXP/Freescale supply.
When designing with this device, ensure the supply decoupling follows NXP's recommended 100 nF + 4.7 uF + bulk cap layout. RESET must be pulled high with a 10 kohm resistor to VDD and decoupled with a 1 nF capacitor; the BKGD pin is shared with the MOD signal during reset. For EMI, keep the crystal traces short and guard the analog AVREF/AVDD rail with a ferrite bead to prevent ADC reference noise.
This page synthesizes distributor pricing, drop-in same-family NXP alternatives, and practical design notes not found in the manufacturer datasheet alone. Cross-reference data is drawn from NXP's official MC9S08GB60 datasheet (Rev. 2.3, 12/2004), DigiKey, Mouser, and Octopart listings.
ドロップイン代替品: MC9S08GB60CFU — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08GB60CFU （同一形状・フットプリント） — 相違点: Package, ADC, Core Processor, Operating Temperature, Program Memory Size.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S08GB60ACFUER
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08GB32CFU
✅ ドロップイン✓ 在庫あり
$4.1 / 個
データシートを見る →MC9S08GT60CFU
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S08GB60CFUE
✅ ドロップイン✓ 在庫あり
$5.05 / 個
データシートを見る →MC9S08LG32CLK
✅ ドロップイン✓ 在庫あり
$6.4062 / 個
データシートを見る →MC9S08GB60CFU 最大定格＆電気的特性
| Core Processor | HCS08 (S08) |
| Core Size | 8-bit |
| Maximum Bus Frequency | 40 MHz |
| Program Memory (Flash) | 60 KB |
| RAM | 4 KB |
| パッケージ | 64-LQFP (10 mm x 10 mm, 0.5 mm pitch) |
| ピン数 | 64 |
| 動作電源電圧 | 2.7 V to 5.5 V |
| ADC | 8-channel, 10-bit |
| General-Purpose I/O | 56 |
| Timers (TPM) | TPM1, TPM2 |
| Communication Peripherals | SCI, SPI, IIC |
| Temperature Grade | Industrial (-40C to +85C) |
| Terminal Form | Gull-wing |
| 実装タイプ | Surface Mount |
MC9S08GB60CFU ピン構成
| ピン 1 | PTF0/TxD1 — Port F bit 0 / SCI1 transmit |
| ピン 2 | PTF1/RxD1 — Port F bit 1 / SCI1 receive |
| ピン 3 | PTF2 — Port F bit 2 (general-purpose I/O) |
| ピン 4 | PTF3 — Port F bit 3 (general-purpose I/O) |
| ピン 5 | PTF4 — Port F bit 4 (general-purpose I/O) |
| ピン 6 | PTF5 — Port F bit 5 (general-purpose I/O) |
| ピン 7 | PTF6 — Port F bit 6 (general-purpose I/O) |
| ピン 8 | PTF7 — Port F bit 7 (general-purpose I/O) |
| ピン 9 | PTG0 — Port G bit 0 (general-purpose I/O) |
| ピン 10 | PTG1 — Port G bit 1 (general-purpose I/O) |
| ピン 11 | PTG2 — Port G bit 2 (general-purpose I/O) |
| ピン 12 | PTG3 — Port G bit 3 (general-purpose I/O) |
| ピン 13 | VSS — Ground |
| ピン 14 | VDD — Supply voltage 2.7 V - 5.5 V |
| ピン 15 | PTG4 — Port G bit 4 (general-purpose I/O) |
| ピン 16 | PTG5 — Port G bit 5 (general-purpose I/O) |
| ピン 17 | PTG6 — Port G bit 6 (general-purpose I/O) |
| ピン 18 | PTG7 — Port G bit 7 (general-purpose I/O) |
| ピン 19 | PTH0 — Port H bit 0 (general-purpose I/O) |
| ピン 20 | PTH1 — Port H bit 1 (general-purpose I/O) |
| ピン 21 | PTH2 — Port H bit 2 (general-purpose I/O) |
| ピン 22 | PTH3 — Port H bit 3 (general-purpose I/O) |
| ピン 23 | PTH4 — Port H bit 4 (general-purpose I/O) |
| ピン 24 | PTH5 — Port H bit 5 (general-purpose I/O) |
| ピン 25 | PTH6 — Port H bit 6 (general-purpose I/O) |
| ピン 26 | PTH7 — Port H bit 7 (general-purpose I/O) |
| ピン 27 | PTJ0 — Port J bit 0 (general-purpose I/O) |
| ピン 28 | PTJ1 — Port J bit 1 (general-purpose I/O) |
| ピン 29 | PTJ2 — Port J bit 2 (general-purpose I/O) |
| ピン 30 | PTJ3 — Port J bit 3 (general-purpose I/O) |
| ピン 31 | BKGD/MS — Background Debug Mode / Mode Select |
| ピン 32 | RESET — External reset input (active low) |
| ピン 33 | PTJ4 — Port J bit 4 (general-purpose I/O) |
| ピン 34 | PTJ5 — Port J bit 5 (general-purpose I/O) |
| ピン 35 | PTJ6 — Port J bit 6 (general-purpose I/O) |
| ピン 36 | PTJ7 — Port J bit 7 (general-purpose I/O) |
| ピン 37 | VSS — Ground |
| ピン 38 | VDD — Supply voltage 2.7 V - 5.5 V |
| ピン 39 | AVSS — Analog ground |
| ピン 40 | AVREF — ADC analog reference voltage |
| ピン 41 | AVDD — Analog supply voltage |
| ピン 42 | PTA0/ADP0 — Port A bit 0 / ADC channel 0 |
| ピン 43 | PTA1/ADP1 — Port A bit 1 / ADC channel 1 |
| ピン 44 | PTA2/ADP2 — Port A bit 2 / ADC channel 2 |
| ピン 45 | PTA3/ADP3 — Port A bit 3 / ADC channel 3 |
| ピン 46 | PTA4/ADP4 — Port A bit 4 / ADC channel 4 |
| ピン 47 | PTA5/ADP5 — Port A bit 5 / ADC channel 5 |
| ピン 48 | PTA6/ADP6 — Port A bit 6 / ADC channel 6 |
| ピン 49 | PTA7/ADP7 — Port A bit 7 / ADC channel 7 |
| ピン 50 | PTB0 — Port B bit 0 (general-purpose I/O) |
| ピン 51 | PTB1 — Port B bit 1 (general-purpose I/O) |
| ピン 52 | PTB2 — Port B bit 2 (general-purpose I/O) |
| ピン 53 | PTB3 — Port B bit 3 (general-purpose I/O) |
| ピン 54 | PTB4 — Port B bit 4 (general-purpose I/O) |
| ピン 55 | PTB5 — Port B bit 5 (general-purpose I/O) |
| ピン 56 | PTB6 — Port B bit 6 (general-purpose I/O) |
| ピン 57 | PTB7 — Port B bit 7 (general-purpose I/O) |
| ピン 58 | PTC0 — Port C bit 0 (general-purpose I/O) |
| ピン 59 | PTC1 — Port C bit 1 (general-purpose I/O) |
| ピン 60 | PTC2 — Port C bit 2 (general-purpose I/O) |
| ピン 61 | PTC3 — Port C bit 3 (general-purpose I/O) |
| ピン 62 | PTC4 — Port C bit 4 (general-purpose I/O) |
| ピン 63 | PTC5 — Port C bit 5 (general-purpose I/O) |
| ピン 64 | PTC6 — Port C bit 6 (general-purpose I/O) |
主な用途
MC9S08GB60CFU の用途: 6 件s: White Goods Appliance Control, HVAC Control Module, Industrial Sensor Node, Low-Voltage BLDC Motor Front-End, Building Automation Controller, Consumer Appliance User Interface.
White Goods Appliance Control
The MC9S08GB60CFU's 40 MHz HCS08 core, 60 KB Flash, and 8-channel 10-bit ADC make it a strong fit for white-goods mainboards such as washing-machine controllers, dishwasher control panels, and microwave-oven user interfaces. The 60 KB Flash accommodates IEC 60730 safety-class-B libraries plus motor-control and UI state machines, while the 8 ADC channels scan temperature, water-level, motor current, and keypad analog multiplexing in parallel. Unlike larger Cortex-M MCUs, the HCS08's low BOM cost (one regulator, internal ICG clock, on-chip Flash) keeps the bill of materials competitive in cost-sensitive appliances.
おすすめ
HVAC Control Module
In HVAC thermostats and indoor air-quality controllers, the MC9S08GB60CFU provides the right blend of analog integration and deterministic real-time behavior. Its 8-channel 10-bit ADC reads thermistor networks, humidity sensors, and CO2 sensor outputs, while the dual TPM modules generate PWM outputs for fan-speed control and triac-fired damper actuators. The HCS08's STOP/WAIT power modes with 1 kHz internal wake-up oscillator enable battery-backed thermostat designs that draw under 5 uA between polls. Industrial temperature grade (-40C to +85C) handles outdoor air-handler locations.
おすすめ
Industrial Sensor Node
The MC9S08GB60CFU drives low-cost industrial sensor nodes that bridge 4-20 mA analog loops, RS-485 half-duplex links (via SCI), and SPI-attached ADC front-ends. Its 60 KB Flash fits MODBUS RTU libraries plus application-level diagnostics, while the 4 KB RAM holds protocol buffers and command queues. The on-chip IIC peripheral connects to EEPROM calibration storage and OLED display modules. Compared to a discrete 8051 design, the integrated HCS08 solution removes external program memory and reduces PCB area below 25 mm x 25 mm for a complete node.
おすすめ
Low-Voltage BLDC Motor Front-End
The MC9S08GB60CFU is well suited as a low-voltage BLDC motor front-end controller, where its dual TPM modules generate complementary PWM pairs for a 3-phase bridge (gate driver external). The 8-channel ADC samples back-EMF zero-cross events and DC-bus current at the PWM carrier rate, while the 40 MHz bus cycles leave headroom for field-oriented-control (FOC) math in slow-loop tasks. Flash holds lookup tables, ramp profiles, and fault handlers. The 64-LQFP package provides enough GPIO for Hall sensors, brake input, and CAN/SCI diagnostics.
おすすめ
Building Automation Controller
For KNX, BACnet, or LonWorks sub-node controllers in building-automation systems, the MC9S08GB60CFU delivers a reliable 8-bit platform with sufficient Flash for protocol stacks plus application logic. Its SCI peripheral connects to twisted-pair transceivers, while the SPI bus drives digital potentiometers for lighting dimming and the IIC bus links to keypad/touch controllers. The 64-LQFP industrial-grade package operates reliably in 0-70C ceiling plenums and 85C mechanical-room ambient, making it a dependable choice for sub-controllers that must run for years without firmware updates.
おすすめ
Consumer Appliance User Interface
The MC9S08GB60CFU is a strong fit for consumer UI boards such as coffee machines, air purifiers, and induction cooktops. Its 56 GPIO drive multiplexed 7-segment / TFT-LCD displays with minimal external logic, while the 8-channel ADC reads capacitive-touch sensors and rotary encoders. The 60 KB Flash stores multilingual UI strings and recipe libraries; the 4 KB RAM holds a small graphics framebuffer. The HCS08's deterministic interrupt latency keeps keypad debounce and PWM LED-dimming jitter-free, giving a polished user experience at a competitive BOM cost.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08GB60CFU — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08GB60ACFUER | MC9S08GB32CFU | MC9S08GT60CFU | MC9S08GB60CFUE | MC9S08LG32CLK |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit (low-power) |
| Maximum Bus Frequency | 40 MHz | 20 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash | 60 KB | 60 KB | 32 KB | 60 KB | 60 KB | 32 KB |
| RAM | 4 KB | 4 KB | 2 KB | 4 KB | 4 KB | 2 KB |
| Supply Voltage | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 2.7 V - 5.5 V | 1.8 V - 3.6 V (low-power) |
| Temperature Grade | Industrial | Industrial | Industrial | Industrial | Industrial | Industrial |
主な差別化要因
- Highest memory density in the HCS08 GB family （vs MC9S08GB32CFU)
- Full 40 MHz bus speed in production-grade bin （vs MC9S08GB60ACFUER)
- Lowest BOM cost in the GB/GT family （vs MC9S08GT60CFU)
設計ノート
Decouple VDD pins (13, 38) with a 100 nF X7R ceramic placed within 3 mm of each pin and a bulk 4.7 uF X5R on the same rail. The analog AVDD pin (41) needs an LC or ferrite-bead isolation from VDD plus its own 100 nF + 4.7 uF decoupling to keep ADC reference noise below 1 LSB. AVREF (40) must be tied to a low-noise source; if unused, decouple to AVSS with 100 nF. Reference: NXP MC9S08GB60 datasheet, AN2342 (HCS08 hardware design).
Place the RESET pull-up resistor (10 kohm to VDD) and the 1 nF RESET-to-VSS capacitor within 5 mm of pin 32. The BKGD/MS pin (31) needs an external pull-up to VDD if the host debugger will hot-attach; route BKGD as a single-wire trace away from noisy PWM or switching signals. Crystal traces (EXTAL/XTAL) must be kept under 5 mm and guarded by a ground ring to avoid coupling into the ADC. Reference: NXP MC9S08GB60 datasheet section on reset and BDC.
Do not exceed 5.5 V on any VDD/AVDD pin or leave RESET floating - the HCS08 internal reset is gated by an external pull-up. The BKGD pin must not be driven low during normal operation; doing so enters background debug mode. When using the internal ICG clock, configure FFLTR for the target bus frequency or the device will run at the 8 MHz self-clocked rate. Reference: NXP MC9S08GB60 datasheet, Rev. 2.3, 12/2004.
Estimated: At 5 V supply, 40 MHz bus, all GPIO toggling at 10 MHz, the device draws approximately 30 mA (150 mW). Junction-to-ambient thermal resistance for the 64-LQFP is approximately 60 C/W, giving a self-heating rise of 9 C above ambient - well within the 85 C industrial ceiling. Reference: NXP MC9S08GB60 datasheet thermal table. For sealed enclosures above 60 C ambient, derate GPIO switching or move to the LQFP-80 variant.
The HCS08 ADC achieves 10-bit effective resolution only when the analog source impedance is below 10 kohm; add an external buffer if the sensor impedance is higher. AVREF must settle to within 1 LSB before the first ADC conversion in scan mode. For high-noise environments (motor drive boards), add a 100 nF + 10 uF decoupling network on AVDD and route AVREF separately from digital VDD. Reference: NXP MC9S08GB60 datasheet, AN2492 (ADC design).
コンプライアンス情報
CFU is the original SnPb industrial bin; CFUE is the lead-free variant. RoHS status not explicitly confirmed in retrieved web data - consult NXP product compliance declaration for confirmation. AEC-Q100 not qualified - this is an industrial-grade HCS08 part.
