MCF52231CAL60 - ColdFire V2 MCU 32-Bit 60MHz 128KB Flash 112-LQFP | NXP
部品番号: MCF52231CAL60 ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.75 | $1,375.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.85 | $9,850.00 |
MCF52231CAL60 概要
What is a ColdFire V2 microcontroller? ColdFire is a 32-bit RISC processor architecture derived from the Motorola 68000 family, optimized for embedded control with a variable-length instruction set. The V2 core implements the ColdFire instruction set with hardware multiply/divide and a unified cache, balancing deterministic interrupt response with low power consumption. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> 32-bit RISC MCU -> semiconductor IC.
Key features include a 10/100 Mbps Ethernet MAC+PHY (FEC+EPHY), a CAN 2.0A/B controller, three UARTs, two I2C ports, two SPI/QSPI interfaces, an 8-channel 12-bit ADC, a 4-channel 32-bit timer, JTAG/BDM debug, and a Phase-Locked Loop (PLL) for clock synthesis. The integrated PHY eliminates external Ethernet magnetics requirements in some designs, reducing BOM cost and PCB area.
The ColdFire V2 core executes most instructions in one clock cycle, providing 60 MIPS at 60 MHz. The Harvard-style memory architecture separates program Flash from data SRAM, and the 16-channel DMA engine offloads peripheral data movement to free the core for application logic. The interrupt controller supports up to 64 interrupt sources with nested prioritization.
Typical applications include industrial Ethernet nodes, building automation controllers, HVAC control systems, CAN/Ethernet gateway bridges, point-of-sale terminals, and networked sensor hubs. The integrated FEC+EPHY makes this part especially attractive for embedded web servers and Modbus/TCP devices where external Ethernet silicon is undesirable.
When designing with this part, consider that it is NRND. New designs should evaluate the MCF52235 or Kinetis families as active replacements. The 112-LQFP package has generous I/O headroom but requires a 4-layer PCB with proper ground pour to manage EMI from the integrated Ethernet PHY. Crystal selection (25 MHz reference) is critical for IEEE 802.3 timing compliance.
This page synthesizes distributor availability, NXP lifecycle status, MCF5223x family comparison data, and design notes not bundled in the manufacturer datasheet. It is engineered as a self-contained reference for procurement, design-in, and migration planning.
ドロップイン代替品: MCF52231CAL60 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCF52231CAL60 （同一形状・フットプリント） — 相違点: Package, Ethernet, Mounting Type, Lifecycle Status, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
MCF52233CAL60
✅ ドロップイン✓ 在庫あり
$33.95 / 個
データシートを見る →MCF52234CAL60
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MCF52235CAL60
✅ ドロップイン✓ 在庫あり
$34.15 / 個
データシートを見る →MCF52231CAL60 最大定格＆電気的特性
| Core | ColdFire V2 (32-bit RISC) |
| 最大クロック周波数 | 60 MHz |
| Program Memory | 128 KB Flash |
| パッケージ | 112-LQFP (20x20 mm) |
| 電源電圧 | 3.3 V |
| Ethernet | 10/100 Mbps FEC + integrated EPHY |
| CAN | 1x CAN 2.0A/B controller |
| UART | 3x UART |
| I2C | 2x I2C |
| SPI / QSPI | 2x SPI/QSPI |
| ADC | 8-channel, 12-bit |
| DMA | 4-channel, 32-bit |
| Timers | 4-channel 32-bit (GPT) |
| Debug | JTAG / BDM |
| 実装タイプ | Surface Mount |
MCF52231CAL60 112-lqfp (20x20 mm) ピン配置ガイド
MCF52231CAL60 (112-lqfp (20x20 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCF52231CAL60.
詳細は データシート をご参照ください。
主な用途
MCF52231CAL60 の用途: 6 件s: Industrial Ethernet Node, Building Automation Controller, CAN-to-Ethernet Gateway, Point-of-Sale (POS) Terminal, Networked Sensor Hub, Embedded Web Server / IoT Gateway.
Industrial Ethernet Node
The MCF52231CAL60's integrated 10/100 Mbps Fast Ethernet Controller (FEC) plus on-chip Ethernet PHY (EPHY) eliminates the need for an external PHY, enabling compact, low-BOM industrial nodes that speak Modbus/TCP, EtherNet/IP, or PROFINET. The 60 MHz ColdFire V2 core delivers 60 MIPS, sufficient for protocol stack execution, and the 128 KB Flash accommodates full TCP/IP stacks such as lwIP or uIP. Designers should add a 25 MHz reference crystal with +/-50 ppm stability to meet IEEE 802.3 jitter requirements and route differential PHY traces with 100-ohm impedance on a 4-layer stackup.
おすすめ
Building Automation Controller
The MCF52231CAL60 is well suited to building automation controllers managing HVAC, lighting, and access subsystems. Its CAN 2.0A/B controller interfaces with HVAC damper and sensor networks, while three UARTs and two I2C ports handle peripheral sensor and actuator buses. The 8-channel 12-bit ADC reads temperature, humidity, and current sensors directly. The integrated Ethernet PHY supports BACnet/IP communication. With NRND status, plan firmware portability to the MCF52235 or Kinetis KE1xF for new building automation designs.
おすすめ
CAN-to-Ethernet Gateway
The combination of CAN 2.0A/B, FEC+EPHY, and 60 MHz ColdFire V2 core makes the MCF52231CAL60 a natural CAN-to-Ethernet gateway bridging industrial CAN networks with TCP/IP backbones. The 4-channel DMA engine moves CAN frames to Ethernet sockets without CPU intervention, leaving the core free for protocol translation. 128 KB Flash holds dual protocol stacks (CANopen plus Modbus/TCP). The 112-LQFP package has sufficient I/O for status LEDs and configuration switches. Migration to the pin-compatible MCF52235CAL60 adds cryptographic acceleration for TLS-secured gateway tunnels.
おすすめ
Point-of-Sale (POS) Terminal
POS terminals benefit from the MCF52231CAL60's Ethernet connectivity for payment authorization and UARTs for receipt printers, barcode scanners, and customer displays. The 128 KB Flash supports embedded SSL/TLS libraries for encrypted payment flows, and the 4-channel DMA offloads network buffering. The 12-bit ADC supports battery or supply voltage monitoring on portable terminals. For PCI-compliant designs, add external secure elements and route the integrated EPHY traces carefully to minimize EMI emissions.
おすすめ
Networked Sensor Hub
The MCF52231CAL60 serves as a sensor hub aggregating data from SPI and I2C sensors and publishing over Ethernet. The two SPI/QSPI interfaces connect to high-speed sensors such as accelerometers or flow meters, while the two I2C ports handle lower-speed environmental sensors. The 8-channel 12-bit ADC reads analog sensors directly. The integrated FEC+EPHY publishes aggregated data over Modbus/TCP or MQTT. The 16 KB SRAM buffers transient data bursts; careful stack sizing is required for Ethernet plus TLS workloads.
おすすめ
Embedded Web Server / IoT Gateway
With integrated Ethernet MAC+PHY, 60 MIPS ColdFire V2 core, and 128 KB Flash, the MCF52231CAL60 can host an embedded HTTP server with REST or CoAP endpoints for IoT gateway applications. The three UARTs bridge to downstream Wi-Fi, Bluetooth, or sub-GHz radio modules, and the QSPI interfaces connect to external Flash for asset data. The CAN module supports industrial sensor side-channels. Design considerations include separating the 3.3 V analog and digital supplies near the EPHY block and placing a 100-ohm termination across the differential pairs within 25 mm of the IC.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCF52231CAL60 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCF52233CAL60 | MCF52234CAL60 | MCF52235CAL60 |
|---|---|---|---|---|
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V2 (32-bit RISC) | ColdFire V2 | ColdFire V2 | ColdFire V2 |
| Clock Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet | FEC + integrated EPHY | FEC + integrated EPHY | FEC + integrated EPHY | FEC + integrated EPHY |
| CAN Module | Yes (1x CAN 2.0A/B) | Yes | Yes (1x CAN 2.0A/B) | Yes (1x CAN 2.0A/B) |
| Cryptographic Acceleration | No | No | No | Yes |
主な差別化要因
- Integrated Ethernet MAC + PHY in a 32-bit MCU （vs MCF52235CVM60)
- Pin-to-pin compatible within the MCF5223x 112-LQFP family （vs MCF52235CVM60)
- 128 KB Flash + ColdFire V2 at 60 MIPS （vs MCF52223CAF80)
設計ノート
Route the EPHY differential pairs (TPTXP/TPTXN, TPRXP/TPRXN) with 100-ohm differential impedance on a 4-layer PCB. Keep trace length under 25 mm, place the 100-ohm termination resistor within 4 mm of the IC pins, and isolate the analog PHY ground (EPHY_GND) from the digital ground using a ferrite bead or 0-ohm link. Reference the MCF52235 datasheet section on PHY layout guidelines. Decouple VDD_PHY with a 10 uF tantalum plus 100 nF ceramic, and each VDD pin with its own 100 nF ceramic.
The MCF52231CAL60 is NRND per the NXP product page. New designs should not use this part. For new designs, evaluate the MCF52235CAL60 (pin-compatible upgrade with cryptographic acceleration) or migrate to the Kinetis KE1xF family for an active ARM Cortex-M0+ alternative. Existing designs should request a last-time-buy quote if volume projections extend beyond the NRND horizon.
Power the MCF52231CAL60 from a clean 3.3 V regulated supply capable of delivering at least 200 mA peak during active Ethernet operation. Use a ferrite-bead-isolated analog 3.3 V rail for the EPHY block and a separate digital 3.3 V rail for the core logic. Place a 10 uF bulk capacitor plus 100 nF decoupling on every VDD pin pair, and keep the ground return path tight to minimize switching noise coupling into the analog PHY.
コンプライアンス情報
Compliance information not present in the Verified Web Data provided. RoHS and REACH status should be confirmed against the NXP product page environmental section or by requesting a compliance certificate from NXP before design-in.
