MCIMX6G2CVM05AB - i.MX6UL ARM Cortex-A7 528MHz MPU | NXP
部品番号: MCIMX6G2CVM05AB ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.45 | $18.45 |
| 10 | $16.2 | $162.00 |
| 100 | $13.95 | $1,395.00 |
| 500 | $11.85 | $5,925.00 |
| 1,000 | $9.95 | $9,950.00 |
MCIMX6G2CVM05AB 概要
An applications processor (AP) is a system-on-chip (SoC) class device that integrates one or more CPU cores with on-chip memory controllers, graphics accelerators, and a broad peripheral mix so that a single IC can serve as the host of an embedded product. The i.MX6UL sits in the low-power, low-cost tier of the NXP i.MX family, optimized for fanless, battery-friendly designs that still need Cortex-A7 performance. Within the broader taxonomy, i.MX6UL is an applications processor -> microprocessor unit (MPU) -> SoC -> semiconductor IC.
Key differentiators of the MCIMX6G2CVM05AB include the Cortex-A7 core with Neon SIMD and single-precision FPU, hardware crypto acceleration (optional per SKU suffix), the integrated PMU that reduces external regulator count, and the 14x14 mm MAPBGA footprint that allows dense 4-layer PCB routing. The 528 MHz speed grade ('05' in the part number) targets cost-sensitive HMI, gateway, and IoT edge nodes where higher-speed 6ULL parts would be over-specified.
Architecturally, the i.MX6UL couples the Cortex-A7 cluster with a 32 KB I-cache / 32 KB D-cache L1 subsystem and a unified 128 KB L2 cache, plus on-chip OCRAM, and an LCDIF pixel pipeline. The 'G2' SKU in the i.MX6UL family denotes specific peripheral fuse-blow options (no security, no GPU); 'AB' denotes the 289-MAPBGA industrial package.
Typical applications include industrial HMI panels, IoT gateways, home automation controllers, point-of-sale terminals, and low-cost automotive telematics modules where AEC-Q100 qualification is not required. Designers also use this part as a cost-down replacement for i.MX6ULL when 528 MHz is sufficient.
Design considerations include careful MAPBGA fan-out (8-layer PCB recommended for DDR3 routing), thermal management at the 528 MHz operating point, and choosing the matching PF3000 or PF0100 PMIC. The integrated power management module does not remove the need for a companion PMIC.
This page synthesizes distributor pricing, drop-in i.MX6UL family alternatives, and PCB/layout design notes not consolidated on the NXP product folder.
ドロップイン代替品: MCIMX6G2CVM05AB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MCIMX6G2CVM05AB （同一形状・フットプリント） — 相違点: Memory Interface, Package.
クイック比較ツール — 並列比較する代替部品を選択:
MCIMX6G3CVM05AB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX6G2CVM07AB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX6G2CVM05AA-FR
✅ ドロップイン✓ 在庫あり
$12.05 / 個
データシートを見る →MCIMX6Y2DVM09AB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX6G1CVM05AB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MCIMX6G2CVM05AB 最大定格＆電気的特性
| Product Type | Applications Processor (MPU / SoC) |
| Core Architecture | ARM Cortex-A7 (32-bit) |
| Core Count | 1 |
| Maximum CPU Frequency | 528 MHz |
| Family | i.MX 6UltraLite (i.MX6UL) |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | 128 KB unified |
| パッケージ | 289-MAPBGA 14x14 mm |
| Memory Interface | 16-bit LPDDR2 / DDR3 / DDR3L |
| 動作温度 | -40C to +105C (industrial) |
| Display Controller | LCDIF (parallel RGB) |
| Connectivity | USB 2.0, Ethernet (10/100), CAN, UART, SPI, I2C, I2S |
| Storage Interfaces | NAND, NOR, eMMC, Quad SPI NOR, SD/MMC |
| RoHS ステータス | Compliant |
MCIMX6G2CVM05AB 289-mapbga 14x14 mm ピン配置ガイド
MCIMX6G2CVM05AB (289-mapbga 14x14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MCIMX6G2CVM05AB.
詳細は データシート をご参照ください。
主な用途
MCIMX6G2CVM05AB の用途: 6 件s: Industrial HMI Panels, IoT Edge Gateways, Point-of-Sale Terminals, Home Automation Controllers, Building Automation Controllers, Medical Monitoring Peripherals.
Industrial HMI Panels
The MCIMX6G2CVM05AB's Cortex-A7 core at 528 MHz, integrated LCDIF display controller, and 16-bit DDR3/LPDDR2 memory interface make it well-suited for industrial human-machine interface panels with TFT displays up to WXGA resolution. Its industrial -40C to +105C temperature grade ensures reliable operation in factory environments with high ambient temperatures and dust exposure. The 289-MAPBGA 14x14 mm package allows compact 4-layer PCB designs suitable for slim panel enclosures, while the integrated power management module reduces external regulator count compared to discrete solutions.
おすすめ
IoT Edge Gateways
The MCIMX6G2CVM05AB's Cortex-A7 with Neon SIMD delivers adequate compute for protocol translation (Modbus, MQTT, OPC-UA) at the network edge, while its integrated Ethernet MAC and multiple UART/SPI/I2C channels allow concurrent wired and wireless modem connections. The low-power design of the i.MX6UL family enables fanless gateways with 5-10 W total power consumption, suitable for DIN-rail mounting. Designers pair this MPU with a Wi-Fi/BLE companion such as an 88W8997 module and run Linux with Buildroot or Yocto for fast boot times.
おすすめ
Point-of-Sale Terminals
The MCIMX6G2CVM05AB supports POS terminal designs by combining Cortex-A7 performance for payment application logic, integrated USB 2.0 for printer/scanner/barcode-reader connectivity, and the LCDIF controller for customer-facing TFT displays. Its 528 MHz speed is sufficient for running a lightweight Linux distribution with the payment stack, and the industrial temperature grade supports semi-outdoor deployments. The 289-MAPBGA footprint enables compact board layouts where every square centimeter of PCB real estate matters, especially behind a touchscreen assembly.
おすすめ
Home Automation Controllers
The MCIMX6G2CVM05AB suits home-automation hub designs that aggregate Z-Wave, Zigbee, Wi-Fi, and BLE protocols, with the Cortex-A7 handling protocol translation and local automation rule execution. Multiple SPI and UART interfaces allow concurrent connections to multiple radio modules, while the integrated Ethernet MAC supports wired backbone connectivity. The i.MX6UL's low power consumption keeps the always-on hub's idle power in the 1-2 W range, important for continuous operation; designers commonly pair this with a Yocto-based Linux distribution.
おすすめ
Building Automation Controllers
The MCIMX6G2CVM05AB's industrial temperature grade, multiple CAN interfaces, and Cortex-A7 performance make it a fit for building automation controllers (BACnet, KNX, Modbus gateways) deployed in mechanical rooms and electrical closets. The 289-MAPBGA package allows high-density board layouts that fit standard 4-inch DIN-rail enclosures. Linux with the Buildroot toolchain gives designers a small-footprint RTOS-like environment with full POSIX support, well-matched to BACnet stack requirements and the MPU's peripheral set.
おすすめ
Medical Monitoring Peripherals
The MCIMX6G2CVM05AB's Cortex-A7 with Neon is adequate for medical peripheral data aggregation (vital-signs monitors, infusion pump controllers) where the host MCU offloads display, networking, and data logging to an applications processor. Industrial temperature grade supports clinical environments with controlled but varying ambient conditions. The integrated LCDIF supports bedside display panels, while USB 2.0 enables connection to upstream EMR systems; pairing with a Cortex-M companion handles real-time safety-critical loops per IEC 62304 process requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCIMX6G2CVM05AB — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCIMX6G3CVM05AB | MCIMX6G2CVM07AB | MCIMX6G2CVM05AA | MCIMX6Y2DVM09AB | MCIMX6G1CVM05AB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) | 289-MAPBGA (14x14) |
| Family | i.MX6UL | i.MX6UL | i.MX6UL | i.MX6UL | i.MX6ULL | i.MX6UL |
| Maximum CPU Frequency | 528 MHz | 528 MHz | 696 MHz | 528 MHz | 900 MHz | 528 MHz |
| Secure Boot (HAB) | No | Yes | No | No | Yes | No |
| Operating Temperature | -40C to +105C (industrial) | -40C to +105C | -40C to +105C | 0C to +70C (commercial) | -40C to +105C | -40C to +105C |
| Core Count | 1 | 1 | 1 | 1 | 1 | 1 |
主な差別化要因
- Integrated power management module reduces external regulator count （vs Discrete Cortex-A7 designs)
- Pin-compatible speed-grade upgrade path （vs MCIMX6G2CVM05AA)
- Drop-in secure-boot upgrade （vs MCIMX6G3CVM05AB)
設計ノート
The 289-MAPBGA 14x14 mm package with 0.8 mm pitch requires a minimum 4-layer PCB (8-layer strongly recommended) for DDR3 routing. Use NXP's i.MX6UL Hardware Design Guide for the controlled-impedance stack-up, keep-out zones around the BGA, and via-in-pad recommendations. DDR3 traces must be length-matched within 25 mil and routed on inner layers between ground planes; signal integrity violations cause intermittent boot failures.
The MCIMX6G2CVM05AB requires an external NXP PF3000 (or PF0100) PMIC. Although the i.MX6UL includes a basic internal power management module, full power sequencing for the core, DDR, and peripheral rails still requires the external PMIC. Connect PMIC_PWRON to the i.MX6UL POR_B signal and follow the PF3000 reference schematic; running the part without the PMIC is not a supported configuration.
At 528 MHz with all peripherals active, the MCIMX6G2CVM05AB dissipates approximately 1 W. The 289-MAPBGA package theta_JA is approximately 25 C/W on a standard 4-layer JEDEC board, giving a 25C junction rise above ambient. For sealed enclosures with limited airflow, provide thermal vias under the MAPBGA and connect them to inner copper pours. Industrial -40C to +105C operation requires the thermal path to keep Tj below 105C at maximum ambient.
Do not assume the MCIMX6G2CVM05AB is AEC-Q100 qualified; the 'AB' suffix denotes industrial temperature grade, not automotive qualification. For automotive ECUs, choose the AEC-Q100-qualified i.MX6 variant with the appropriate part suffix. Also verify the boot mode configuration (LCD_DATA0..LCD_DATA21 sampling on POR_B rising edge) is correctly set for your chosen boot source; misconfigured boot modes result in silent boot failures.
コンプライアンス情報
RoHS and REACH compliant per NXP product folder. Industrial temperature grade -40C to +105C; NOT AEC-Q100 qualified - choose AEC-Q100 i.MX6 automotive SKU for under-hood use.
