Microchip Technology

MCP3423T-E/MF - 18-Bit Dual-Channel Sigma-Delta ADC | Microchip

部品番号: MCP3423T-E/MF ✓ 生産中
2.048 V Vdss 10-VFDFN exposed-pad package, 3 x 3 mm Package
MOQ: 1 |

MCP3423T-E/MF 概要

The Microchip Technology MCP3423T-E/MF is an 18-bit, dual-channel sigma-delta analog-to-digital converter with differential inputs, an on-board 2.048 V reference, and an I2C serial interface in a 10-pin 3 x 3 mm DFN package. It supports differential input ranges of ±2.048 V and conversion rates up to 3.75 samples per second.

A sigma-delta ADC is a class of analog-to-digital converter that uses continuous-time delta-sigma modulation and digital filtering to convert analog voltages into high-resolution digital codes. It belongs to the ADC and DAC category within data-converter ICs and is used when low noise, good linearity, and precise measurement matter more than very high conversion speed.

The MCP3423 provides two differential measurement channels and up to 18 bits of resolution. Its internal 2.048 V reference simplifies system design by removing the need for an external precision reference in common bipolar-input applications. The two-wire I2C interface reduces the number of required signal lines, while 3.75 SPS conversion capability is suited to slow-changing industrial, environmental, and instrumentation signals.

Its delta-sigma architecture inherently shapes quantization noise toward lower frequencies, helping reject broadband noise when the analog signal bandwidth is limited. The on-board reference and differential inputs are particularly useful for sensor bridges, pressure transducers, current measurements, and low-level instrumentation. Because the converter averages successive samples through digital filtering, input settling and filter behavior must be considered when measuring rapidly changing signals.

Typical uses include industrial process monitoring, precision temperature measurement, bridge-sensor acquisition, laboratory instrumentation, and low-speed data-acquisition systems. The 3 x 3 mm DFN package supports compact designs but requires careful PCB layout, exposed-pad soldering, and low-noise routing. The MCP3423T-E/MF is packaged on tape and reel for automated manufacturing.

For best results, use suitable filtering at each analog input, keep the I2C traces short, provide clean supply and ground connections, and follow the manufacturer datasheet's exposed-pad land pattern. Differential input measurements also require attention to common-mode voltage, source impedance, and conversion timing when calculating measurement uncertainty.

This page combines the manufacturer's core device characteristics with practical analog-layout guidance, application analysis, and same-package replacement information. It highlights where the 18-bit resolution, differential architecture, 2.048 V reference, and 3.75 SPS rate make the MCP3423T-E/MF an effective precision-measurement ADC rather than a high-speed data-conversion solution.

ドロップイン代替品: MCP3423T-E/MF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MCP3423T-E/MF (同一形状・フットプリント) — 相違点: Digital Interface, Package, Conversion Rate, Resolution, Automatic Calibration.

Microchip Technology
Digital Interface: I2C
Package: 10-DFN (3x3 mm)
Conversion Rate: 4 samples per second
Microchip Technology
Digital Interface: I2C
Package: 10-MSOP
Conversion Rate: Up to 4 SPS
Microchip Technology
Digital Interface: I²C-compatible, 2-wire serial
Package: 10-MSOP
Resolution: 18 bits

MCP3423-E/MF

✅ ドロップイン
Microchip Technology
📦 10-VFDFN (3 x 3 mm)
18 bits · 2 channels · Delta-sigma · Differential · 2.048 V · ±2.048 V · 4.096 V · 4 samples per second

価格はお問い合わせください

データシートを見る →

MCP3423T-E/UN

✅ ドロップイン
Microchip Technology
📦 10-VFDFN (3 x 3 mm)
18 bits · 2 differential channels · Delta-sigma · 240 SPS · 2.048 V · ±2.048 V · 3.3 V to 5 V · I²C-compatible, 2-wire serial

価格はお問い合わせください

データシートを見る →

MCP3423T-E/MF 最大定格&電気的特性

分解能 18 bit
Number of Channels 2 differential-input channels
ADC Architecture 1-channel sigma-delta per differential input channel
Conversion Rate 3.75 samples per second
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Digital Interface I2C serial interface
電源電圧 3.3 V to 5 V
パッケージ 10-VFDFN exposed-pad package, 3 x 3 mm
実装タイプ Surface mount
Packaging Tape and reel
Analog Input Type Differential

MCP3423T-E/MF 10-vfdfn exposed-pad package, 3 x 3 mm ピン配置ガイド

MCP3423T-E/MF (10-vfdfn exposed-pad package, 3 x 3 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

MCP3423T-E/MF の 10-vfdfn exposed-pad package, 3 x 3 mm パッケージピン配置図

詳細なピン配置データはありません: MCP3423T-E/MF.

詳細は データシート をご参照ください。

主な用途

MCP3423T-E/MF の用途: 6 件s: Precision Bridge Sensor Acquisition, Industrial Temperature Measurement, Current and Voltage Monitoring, Environmental and Gas Sensor Readout, Laboratory Instrumentation, Low-Speed Data Acquisition.

🏭

Precision Bridge Sensor Acquisition

The MCP3423T-E/MF suits Wheatstone bridge and strain-gauge measurement systems because it provides two differential input channels and up to 18 bits of resolution. The differential topology rejects common-mode voltage and reduces sensitivity to ground noise, while the internal 2.048 V reference gives the converter a defined measurement span of ±2.048 V. Install matched input filtering and balance the bridge network so both channels present similar impedance. The 3.75 SPS conversion rate is appropriate for slowly changing mechanical variables such as load, pressure, or displacement.

🌡️

Industrial Temperature Measurement

The MCP3423T-E/MF can acquire resistive sensor or conditioned temperature signals when high resolution matters more than rapid sampling. Its 18-bit conversion resolution and differential inputs help distinguish small changes in bridge or resistive networks, while the 2.048 V internal reference removes the routine need for a separate reference source. At 3.75 samples per second, the converter supports thermal monitoring, environmental chambers, and temperature-control loops whose signals change gradually. The analog front end must still provide excitation, current limiting, and any required linearization.

⚡

Current and Voltage Monitoring

The MCP3423T-E/MF is suitable for low-level current or voltage monitoring when the measured differential signal fits the ±2.048 V input range. Two differential channels allow simultaneous monitoring of two related quantities, and the 18-bit resolution can represent small changes across a suitably scaled shunt or sensor output. The I2C interface supports straightforward connection to a controller in industrial monitoring equipment. Input protection, filtering, and scaling must be designed so transients and common-mode voltage remain outside the converter’s operating limits.

🧩

Environmental and Gas Sensor Readout

The MCP3423T-E/MF can digitize conditioned outputs from environmental, gas, and humidity sensors when the sensor signal is slow and differential. The 18-bit resolution improves the useable resolution of low-amplitude sensor outputs, while the internal 2.048 V reference supports repeatable ratiometric measurements when the sensor and converter share a suitable reference arrangement. Its two channels can monitor a sensor and a compensation signal. Digital filtering inherent to the delta-sigma architecture helps suppress high-frequency noise, but signal bandwidth must be limited appropriately.

🖥️

Laboratory Instrumentation

The MCP3423T-E/MF is appropriate for laboratory and bench instrumentation that measures slow, high-resolution analog quantities. Its differential inputs help reject interference, the 2.048 V internal reference simplifies system calibration, and the I2C interface allows a controller to configure and retrieve conversion results. Two channels support reference and measurement monitoring in compact instruments. Because the conversion rate is 3.75 samples per second, waveform capture is not appropriate; the device instead targets meters, loggers, laboratory monitors, and calibration equipment with quasi-static inputs.

📡

Low-Speed Data Acquisition

The MCP3423T-E/MF fits compact data-acquisition modules that monitor slow-changing voltages with high resolution. Its two differential channels reduce wiring complexity and improve noise immunity compared with single-ended measurements, while the 18-bit conversion core preserves fine detail in scaled sensor outputs. The I2C bus supports connection to embedded controllers, and the 3 x 3 mm DFN package helps minimize board area. Designers should treat the converter as a precision measurement element rather than a general-purpose oscilloscope ADC and account for digital-filter settling after each conversion.

おすすめ製品の概要

MCP3422 Single-channel member of the same MCP342x ADC family 使用用途: Precision Bridge Sensor Acquisition, Industrial Temperature Measurement, Environmental and Gas Sensor Readout, Laboratory Instrumentation MCP3424 Multi-channel member of the same MCP342x ADC family 使用用途: Precision Bridge Sensor Acquisition, Current and Voltage Monitoring, Environmental and Gas Sensor Readout, Low-Speed Data Acquisition MCP3423 Base-family ADC used for the same precision measurement class 使用用途: Industrial Temperature Measurement, Current and Voltage Monitoring, Laboratory Instrumentation, Low-Speed Data Acquisition
What is the MCP3423T-E/MF?
The MCP3423T-E/MF is an 18-bit, dual-channel delta-sigma ADC with differential inputs, a 2.048 V internal reference, and an I2C interface. According to the Microchip Technology manufacturer datasheet, it converts two analog input channels at rates up to 3.75 samples per second and is offered in a 10-pin 3 x 3 mm DFN package with an exposed pad.
What is the conversion rate of MCP3423T-E/MF?
The MCP3423T-E/MF supports a maximum conversion rate of 3.75 samples per second. According to the Microchip Technology manufacturer datasheet, this rate suits low-frequency measurements where noise filtering and precision are more important than rapid sampling. The device includes two differential input channels, 18-bit resolution, and a 2.048 V on-board reference.
What input voltage range does MCP3423T-E/MF support?
The MCP3423T-E/MF supports a differential input range of ±2.048 V around ground when its internal 2.048 V reference is used. According to the Microchip Technology manufacturer datasheet, the differential architecture measures the voltage between each input pair rather than measuring each signal independently against a common ground.
Where can I download the MCP3423T-E/MF datasheet PDF?
The official MCP3423T-E/MF datasheet is available through the Microchip Technology MCP3423 product page at https://www.microchip.com/en-us/product/MCP3423. The datasheet contains the detailed electrical characteristics, pin descriptions, I2C timing, application circuit, and the 10-VFDFN land pattern needed for PCB implementation.
Where is the MCP3423T-E/MF pinout?
The MCP3423T-E/MF pinout is shown in the manufacturer datasheet’s pin-description and package drawings for the 10-VFDFN, 3 x 3 mm exposed-pad package. Use that diagram to assign VDD, VSS, analog inputs, digital I2C signals, and the exposed thermal pad. The exposed pad must also follow the manufacturer’s land-pattern and soldering instructions.
Is MCP3423T-E/MF suitable for bridge sensor measurement?
Yes, the MCP3423T-E/MF is suitable for bridge sensors and other low-level differential measurements. Its two differential inputs, 18-bit resolution, and internal 2.048 V reference reduce the need for external signal-conditioning components. According to the Microchip Technology manufacturer datasheet, careful input filtering and source-impedance balancing remain important for accurate bridge readings.
What are the key specifications of MCP3423T-E/MF that engineers should know?
The principal MCP3423T-E/MF specifications are 18-bit resolution, two differential channels, a 3.75 SPS maximum conversion rate, a 2.048 V internal reference, and an I2C interface. According to the Microchip Technology manufacturer datasheet, these characteristics position the device for precision low-frequency acquisition rather than waveform sampling, high-speed communications, or motor-control feedback.
MCP3423T-E/MF vs MCP3423-E/MF — which should I choose?
MCP3423T-E/MF and MCP3423-E/MF are closely related Microchip Technology orderable versions with the same 18-bit conversion core, two-channel architecture, and 3.75 SPS class of performance. The distinguishing ordering code and temperature treatment should be checked in the manufacturer ordering table before substitution. Verify the exact temperature grade and qualification requirements for the end application.
Can MCP3423T-E/UN replace MCP3423T-E/MF?
MCP3423T-E/UN is the closest same-family ordering alternative identified for the MCP3423T-E/MF, with the same 18-bit, two-channel, 3.75 SPS device class and a 3 x 3 mm DFN format. Cross-reference listings associate the two orderable parts. Confirm pin functions, exposed-pad construction, tape orientation, temperature grade, and lifecycle status against the Microchip ordering information before replacing an existing design.
What can replace MCP3423T-E/MF?
The closest identified replacements are Microchip Technology’s MCP3423-E/MF and MCP3423T-E/UN orderable variants, both associated with the same 18-bit, dual-channel ADC family and DFN package class. Do not treat every MCP342x member as interchangeable because channel count and pin assignments differ. Confirm the exact pinout, electrical limits, qualification grade, and assembly orientation before substitution.
When should I choose MCP3423T-E/MF over a faster ADC?
Choose the MCP3423T-E/MF when measuring slowly changing or low-frequency analog signals that benefit from 18-bit resolution, differential input cancellation, and digital noise filtering. According to the Microchip Technology manufacturer datasheet, its maximum rate is 3.75 samples per second. Use a higher-speed ADC instead for waveforms, motor control, or signals with meaningful high-frequency content.
Is MCP3423T-E/MF suitable for temperature measurement?
The MCP3423T-E/MF is suitable for many precision temperature-measurement systems using a resistive sensor, RTD, thermocouple interface, or bridge network. Its differential inputs reject common-mode noise, while 18-bit resolution and the internal 2.048 V reference support detailed measurement. A sensor-specific front end and cold-junction or linearization circuitry may still be required.
How should I design the PCB layout for MCP3423T-E/MF?
Place the MCP3423T-E/MF close to the analog source and route the differential input pair as a short, symmetrical pair with continuous ground reference. Keep the I2C traces away from sensitive analog nodes, provide a quiet ground path, and follow the manufacturer exposed-pad land pattern. Microchip’s application guidance emphasizes proper grounding and decoupling for predictable converter performance.
Where can I buy MCP3423T-E/MF and check its lead time?
Use the Request a Quote form on this page to request MCP3423T-E/MF pricing, current inventory, lead time, and package availability. The form connects the request with XAIPART’s sales workflow. Confirm the required quantity, tape-and-reel packaging, and target shipment date when submitting the request.
What is the price and stock status of MCP3423T-E/MF?
Current MCP3423T-E/MF pricing and stock status should be obtained through the Request a Quote form on this page. The structured commercial response can reflect current channel conditions, requested quantity, and expected fulfillment timing. Use that form for a formal quotation rather than relying on a potentially stale historical listing.
Is there a cross-brand drop-in equivalent for MCP3423T-E/MF?
No cross-brand drop-in equivalent is established for the MCP3423T-E/MF because its combination of two differential channels, 18-bit resolution, 3.75 SPS conversion rate, I2C interface, internal 2.048 V reference, and 10-VFDFN footprint is specific. A functionally similar ADC may require a different footprint, interface, reference arrangement, or external components, so it should not be treated as a direct replacement.

エンジニアリング参考データ: MCP3423T-E/MF — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MCP3423T-E/MF for compact, low-speed precision measurement requiring two differential channels, 18-bit resolution, and an I2C interface. Its internal 2.048 V reference and ±2.048 V differential range are especially useful for bridge sensors, scaled current measurements, environmental sensors, and laboratory instrumentation. MCP3423-E/MF is the closest related ordering option when its exact qualification and temperature-code treatment fit the design, but those ordering details must be checked before substitution. MCP3423T-E/UN can serve as another same-family assembly alternative when its package-code, pin, orientation, and qualification conditions meet the PCB requirements. Neither option should be chosen for waveform acquisition because the family operates at up to 3.75 samples per second. For systems needing four inputs, consider MCP3424 and verify whether its pinout and conversion requirements preserve the intended design. Also consider the single-channel MCP3422 when only one analog measurement is required and board simplicity matters more than dual-channel capability.

代替品との比較

パラメータ この製品 MCP3423-E/MF MCP3423T-E/UN
Brand Microchip Technology Microchip Technology Microchip Technology
Package 10-VFDFN (3 x 3 mm) 10-VFDFN (3 x 3 mm) 10-VFDFN (3 x 3 mm)
Resolution 18 bit 18 bit 18 bit
Input Channels 2 differential inputs 2 differential inputs 2 differential inputs
Conversion Rate 3.75 samples per second 3.75 samples per second 3.75 samples per second
Internal Reference 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V
Digital Interface I2C I2C I2C
ADC Architecture Delta-sigma Delta-sigma Delta-sigma
Ordering-Code Difference MCP3423T-E/MF T ordering code omitted Package code changes from MF to UN

主な差別化要因

  • Dual differential inputs in a compact package (vs MCP3423-E/MF)
  • Same conversion core with an alternate assembly ordering code (vs MCP3423T-E/UN)
  • Integrated precision reference simplifies bipolar measurement (vs MCP3423-E/MF)

設計ノート

Route each differential input as a short pair with consistent geometry and a continuous ground reference. Place input-series resistors and anti-alias capacitors close to the analog pins, using matched components for both channels when channel matching is important. Keep switching-regulator paths, high-current returns, and digital clock traces away from the MCP3423 input nodes to minimize conversion errors.

Follow the manufacturer datasheet land pattern for the 10-VFDFN exposed-pad package. The exposed pad is both a thermal and electrical connection; provide adequate ground-plane area, solder it according to the manufacturer’s assembly guidance, and avoid unintended thermal coupling from nearby heat sources. Verify paste volume, reflow profile, and via placement with the assembly capability in mind.

Do not treat the 3.75 samples per second rating as a general-purpose sampling rate. Allow for digital-filter settling, and use an anti-alias filter appropriate for the measurement bandwidth. Also check input common-mode voltage, source impedance, and differential range before applying a signal. These checks prevent overload and prevent the converter’s high resolution from being undermined by noise or imbalance.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer identifies the MCP3423 as an automotive-capable family member, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement is stated for the exact ordering code. AEC-Q100 qualification should be confirmed against the exact Microchip ordering and qualification documentation.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MCP3423T-E/MF datasheet MCP3423T-E/MF pinout MCP3423T-E/MF datasheet pdf MCP3423T-E/MF equivalent MCP3423T-E/MF replacement MCP3423T-E/MF vs MCP3423-E/MF MCP3423 18 bit ADC MCP3423 I2C ADC MCP3423 10-VFDFN MCP3423 bridge sensor ADC MCP3423 precision measurement MCP3423T-E/MF price MCP3423T-E/MF stock Microchip Technology MCP3423T-E/MF MCP3423 schematic

関連部品&用語

Microchip Technology MCP3423T-E/MF MCP3423-E/MF MCP3423T-E/UN MCP3422 MCP3424 analog-to-digital converter ADC delta-sigma ADC sigma-delta modulation differential input I2C internal voltage reference 2.048 V reference 18-bit resolution 3.75 samples per second 10-VFDFN DFN package surface-mount package exposed pad anti-alias filter bridge sensor strain gauge industrial instrumentation AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示