Texas Instruments

MSP430F147IPAG - 8MHz 16-Bit MCU with 32KB Flash | Texas Instruments

部品番号: MSP430F147IPAG ✓ 生産中
2.5 V or 3.3 V Vdss 64-pin TQFP (PAG), 10 mm x 10 mm Package 8 MHz Speed 32 KB (32K x 8 + 256 B) Memory
MOQ: 1 |

MSP430F147IPAG 概要

The Texas Instruments MSP430F147IPAG is an 8 MHz 16-bit mixed-signal microcontroller with 32 KB Flash, 1 KB SRAM, a 12-bit ADC, comparator, SPI, UART, 48 I/O pins, and a 64-pin TQFP (PAG) package. It combines a 16-bit RISC core, 16-bit registers, constant generators, and hardware multiplier support for efficient embedded control.

A mixed-signal microcontroller integrates digital processing with analog measurement functions on one device. The MSP430F147 belongs to the MSP430F14x mixed-signal MCU family and supports two built-in 16-bit timers, one USART, a fast 12-bit ADC, a comparator, and code- and hardware-compatible family variants. This combination places the device above a basic general-purpose MCU in measurement capability while retaining low-power embedded-control characteristics.

Key features include an 8 MHz maximum clock, 32 KB of Flash program memory, 1 KB of SRAM, 48 I/O pins, and an integrated 12-bit ADC. Two 16-bit timers support timing, capture, compare, and periodic event generation, while the USART and SPI interfaces connect sensors, transceivers, displays, and external data-conversion components. The 64-pin TQFP package also provides more I/O and peripheral connectivity than the smaller members of the MSP430 family.

The MSP430 architecture uses a 16-bit RISC CPU with 16-bit registers and constant generators, which help reduce the number of instructions required for many operations. Its hardware multiplier accelerates multiplication-intensive routines, while the mixed-signal resources allow an analog input to be measured without adding a separate ADC. The device supports operation from 2.5 V or 3.3 V supply configurations, depending on the specific operating conditions and application requirements.

Typical uses include industrial sensor acquisition, low-power measurement instruments, building-control modules, data loggers, and embedded communication equipment. The 12-bit ADC suits applications requiring more resolution than a basic comparator threshold, while two timers and 48 I/O pins simplify peripheral connection and deterministic control. SPI and UART provide practical paths to external sensors, transceivers, memory, and host systems.

PCB design should preserve clean analog grounding near the ADC and comparator while routing digital clock and switching signals away from sensitive inputs. External bypass capacitors should be placed close to the supply pins, and unused I/O pins should be configured according to the manufacturer datasheet. Firmware and peripheral assignments should be checked against the exact device variant before production release.

This product page combines the key electrical specifications, package information, application guidance, comparison parameters, and practical design considerations needed to evaluate the MSP430F147IPAG. It also distinguishes direct family alternatives from functions that are merely similar, helping engineers make a package-, memory-, and peripheral-compatible selection decision.

ドロップイン代替品: MSP430F147IPAG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MSP430F147IPAG (同一形状・フットプリント) — 相違点: ADC Resolution, Flash Memory, Package, SRAM, Architecture.

Texas Instruments
ADC Resolution: 12 bits
Flash Memory: 48 KB
Package: 64-pin TQFP, 10 mm x 10 mm
比較対象 MSP430F147IPAG →
Texas Instruments
ADC Resolution: 12-bit
Flash Memory: 60 KB
Package: 64-TQFP, 10 mm x 10 mm
比較対象 MSP430F147IPAG →

MSP430F148IPAG

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 64-pin TQFP (PAG), 10 mm x 10 mm
16-bit RISC · MSP430x1xx · 8 MHz · 48 KB · 2 KB · 12 bits · Integrated · Integrated

価格はお問い合わせください

データシートを見る →

MSP430F1481IPAG

✅ ドロップイン ⚠️ 仕様未検証
📦 64-pin TQFP (PAG), 10 mm x 10 mm
Uses the same 8 MHz 16-bit architecture and 64-pin TQFP footprint with closely matched memory and mixed-signal resources; MSP430F14x1-specific behavior requires review.

📋 参考代替品(カタログ未掲載)

MSP430F1471IPAG

✅ ドロップイン ⚠️ 仕様未検証
📦 64-pin TQFP (PAG), 10 mm x 10 mm
Matches the 8 MHz CPU, 32 KB Flash class, 1 KB SRAM, 12-bit ADC, timers, and 64-pin footprint; MSP430F14x1-specific peripheral changes must be reviewed.

📋 参考代替品(カタログ未掲載)

MSP430F149IPAG

✅ ドロップイン ⚠️ 仕様未検証
Texas Instruments
📦 64-pin TQFP (PAG), 10 mm x 10 mm
16-bit RISC mixed-signal microcontroller · 8 MHz · 60 KB · 2 KB · 12-bit · Integrated comparator · SPI/UART · Integrated hardware multiplier

価格はお問い合わせください

データシートを見る →

MSP430F1491IPAG

✅ ドロップイン ⚠️ 仕様未検証
📦 64-pin TQFP (PAG), 10 mm x 10 mm
Keeps the 8 MHz 16-bit mixed-signal architecture and 64-pin TQFP footprint but increases Flash capacity and introduces MSP430F14x1-specific behavior.

📋 参考代替品(カタログ未掲載)

MSP430F147IPAG 最大定格&電気的特性

Product Type 16-bit mixed-signal microcontroller
CPU Architecture MS430X RISC
最大クロック周波数 8 MHz
Flash Memory 32 KB (32K x 8 + 256 B)
SRAM 1 KB
ADC Resolution 12 bit
ADC Architecture 12-bit successive approximation
Comparator Count 1
Timer Count 2 x 16-bit timers
USART Count 1
SPI Interface 1
General-Purpose I/O Pins 48
電源電圧 2.5 V or 3.3 V
動作温度範囲 -40°C to +85°C
パッケージ 64-pin TQFP (PAG), 10 mm x 10 mm
実装タイプ Surface mount

MSP430F147IPAG 64-pin tqfp (pag), 10 mm x 10 mm ピン配置ガイド

MSP430F147IPAG (64-pin tqfp (pag), 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MSP430F147IPAG の 64-pin tqfp (pag), 10 mm x 10 mm パッケージピン配置図

詳細なピン配置データはありません: MSP430F147IPAG.

詳細は データシート をご参照ください。

主な用途

MSP430F147IPAG の用途: 6 件s: Industrial Sensor Acquisition, Low-Power Measurement Instrument, Building Automation Controller, Data Logger and Portable Recorder, Communication and Serial Interface Module, Embedded Motor and Process Control.

🏭

Industrial Sensor Acquisition

The MSP430F147IPAG fits industrial sensor acquisition because its 12-bit ADC can digitize analog inputs while the 8 MHz 16-bit processor handles filtering, scaling, and control functions on the same device. Two 16-bit timers support timed sampling, while 48 I/O pins connect sensors, alarm signals, and discrete actuators. The 2.5 V or 3.3 V supply configurations accommodate compact embedded instrumentation, and the UART provides a direct path to a host or supervisory controller. For accurate measurements, use separate analog and digital grounding strategies, condition high-impedance sensor sources, and verify the ADC input range and acquisition timing against the manufacturer datasheet.

🖥️

Low-Power Measurement Instrument

The MSP430F147IPAG is suitable for portable measurement instruments that combine low-power operation with an integrated analog front end. Its 16-bit RISC core, 16-bit registers, constant generators, and hardware multiplier support efficient signal-processing routines, while the 12-bit ADC removes the need for a separate converter in many designs. The 1 KB SRAM supports buffering and real-time calculations, and the USART or SPI interface can connect to a display, external memory, or radio module. Power architecture should account for the selected operating mode because the ADC, timers, communication interfaces, and CPU clock determine the actual current draw.

🏠

Building Automation Controller

The MSP430F147IPAG supports building-automation nodes that monitor analog inputs and control discrete outputs in a compact controller. Its 48 I/O pins can accommodate digital sensors, relay-control outputs, status indicators, and communication interfaces, while the integrated 12-bit ADC handles temperature, occupancy, or air-quality sensor inputs. Two hardware timers improve repeatability for periodic measurement and control tasks, and the 64-pin TQFP package simplifies access to the available I/O. In this application, keep relay drivers and inductive loads away from the ADC region, provide local regulation for noisy loads, and validate the controller's watchdog and brownout behavior during power transitions.

📱

Data Logger and Portable Recorder

The MSP430F147IPAG can serve as the controller in a compact data logger that samples analog inputs and transfers records through a serial link. The 12-bit ADC and two timers establish a predictable measurement sequence, while the hardware multiplier accelerates common scaling and filtering operations on the 16-bit CPU. SPI can connect to serial flash or an external sensor, and the USART can provide a simple connection to a host computer or radio module. Because SRAM is limited to 1 KB, use buffering or external storage when acquisition bursts exceed internal memory. Design a low-power retention strategy and use the family datasheet to configure the clock, ADC, and unused pins correctly.

🌐

Communication and Serial Interface Module

The MSP430F147IPAG is appropriate for a communication module that must combine local control with serial connectivity. Its USART supports host or peripheral communication, SPI enables connection to sensors, transceivers, or external storage, and two timers can generate timing events or service protocol intervals. The 8 MHz 16-bit processor provides enough performance for framing, checksums, buffering, and supervisory logic, while 48 I/O pins provide status and configuration signals. At 2.5 V or 3.3 V, the controller can operate near low-voltage radio and sensor subsystems, although interface voltage levels must be checked. Use controlled impedance routing for high-speed signals and keep switching-current return paths separate from ADC references.

⚡

Embedded Motor and Process Control

The MSP430F147IPAG can supervise low-power process-control or motor-control subsystems when a dedicated motor driver is not required. Two 16-bit timers support PWM generation, input capture, and period-based control, while the 12-bit ADC provides feedback from temperature, pressure, position, or current-sensing networks. Its 48 I/O pins allow direct connection of encoders, fault signals, gate-control lines, and communication peripherals. The hardware multiplier improves the efficiency of proportional-integral-derivative and other multiply-intensive control calculations. Keep high-current switching stages separate from the MCU supply and analog ground, add appropriate gate-driver protection, and verify timing margins because 8 MHz CPU operation and peripheral synchronization determine the achievable control-loop rate.

おすすめ製品の概要

MSP430F148IPAG Texas Instruments 使用用途: Industrial Sensor Acquisition, Low-Power Measurement Instrument, Building Automation Controller, Communication and Serial Interface Module MSP430F1481IPAG Pin-compatible family controller for acquisition designs 使用用途: Industrial Sensor Acquisition, Communication and Serial Interface Module MSP430F1471IPAG Related family option for mixed-signal measurement 使用用途: Low-Power Measurement Instrument MSP430F149IPAG Texas Instruments 使用用途: Building Automation Controller, Data Logger and Portable Recorder, Embedded Motor and Process Control MSP430F1491IPAG Related high-Flash family alternative 使用用途: Data Logger and Portable Recorder, Embedded Motor and Process Control
What are the key specifications of MSP430F147IPAG that engineers should know?
The MSP430F147IPAG is an 8 MHz, 16-bit mixed-signal MCU with 32 KB Flash, 1 KB SRAM, a 12-bit ADC, two 16-bit timers, one USART, SPI, and 48 I/O pins. According to the Texas Instruments product page, the device uses a 64-pin TQFP package rated for -40°C to +85°C operation. These specifications make it suitable for embedded measurement, industrial control, data acquisition, and communication modules requiring integrated analog-to-digital conversion.
What is the operating voltage of MSP430F147IPAG?
The MSP430F147IPAG supports 2.5 V or 3.3 V supply configurations. The exact limits for each voltage range and the applicable operating conditions are defined by the Texas Instruments MSP430F14x mixed-signal microcontroller datasheet. Confirm the supply tolerance, timing, and input thresholds for the selected operating mode before finalizing the power architecture.
How much memory does MSP430F147IPAG have?
The MSP430F147IPAG provides 32 KB Flash program memory and 1 KB SRAM. Its distributor specification describes the Flash organization as 32K x 8 plus 256 bytes, with the additional memory associated with the device architecture. The 32 KB Flash supports firmware and constants, while the 1 KB SRAM serves as the primary working memory for stacks, variables, and real-time control routines.
Where can I download the MSP430F147IPAG datasheet PDF?
The official MSP430F147IPAG datasheet PDF is available from the Texas Instruments product page at https://www.ti.com/product/MSP430F147. The linked family document covers the MSP430F14x, MSP430F14x1, and MSP430F13x mixed-signal microcontrollers. Use the manufacturer document for pin assignments, electrical limits, timing, memory maps, ADC specifications, and recommended application circuits.
Where can I find the MSP430F147IPAG pinout?
The MSP430F147IPAG pinout is published in the Texas Instruments MSP430F14x mixed-signal microcontroller datasheet and its 64-pin TQFP package drawing. The device uses a PAG package with 64 leads and a 10 mm x 10 mm body. Use the manufacturer pin-description table when assigning PCB nets because port multiplexing, supply pins, ground pins, and special-function assignments must follow the exact package drawing.
Is MSP430F147IPAG suitable for analog measurement applications?
Yes, the MSP430F147IPAG is suitable for analog measurement because it combines a 12-bit ADC, a comparator, and 48 I/O pins with an 8 MHz 16-bit processor. The ADC provides substantially more measurement resolution than a simple comparator threshold, while two timers and the USART support time-based acquisition and data transfer. Analog grounding and input-source conditioning remain essential to achieve predictable measurement performance.
What can replace MSP430F147IPAG?
The closest replacements are 64-pin TQFP members of the MSP430F14x family that retain pin compatibility while changing flash capacity or mixed-signal features. MSP430F148IPAG and MSP430F1481IPAG provide the closest memory and peripheral configuration, while MSP430F149IPAG and MSP430F1491IPAG increase Flash capacity. Firmware, ADC requirements, clock setup, and pin multiplexing should be reviewed before approving any substitution.
Is MSP430F147IPAG the same as MSP430F1471IPAG?
No, MSP430F147IPAG and MSP430F1471IPAG are related 64-pin family members but are not identical. According to the Texas Instruments family information, the MSP430F14x and MSP430F14x1 groups have related timing and peripheral resources, but the devices are positioned as distinct variants. Compare the exact ADC, timer, interrupt, and memory requirements from the family datasheet before treating one as a substitute for the other.
When should I choose MSP430F147IPAG over MSP430F148IPAG?
Choose MSP430F147IPAG when the design needs 32 KB Flash, 1 KB SRAM, a 12-bit ADC, and the MSP430F14x peripheral arrangement without requiring the expanded resources associated with later family members. Choose MSP430F148IPAG when its additional resources or application-specific device behavior are required. Both use the same 64-pin TQFP PAG package, so the decision should follow the required memory and peripheral configuration rather than footprint alone.
MSP430F147IPAG vs MSP430F149IPAG - which is better for firmware-heavy control?
MSP430F149IPAG is generally the better choice for firmware-heavy control when its larger Flash capacity is required, while MSP430F147IPAG is appropriate for designs that fit within 32 KB Flash and need 1 KB SRAM. Both are 8 MHz, 16-bit mixed-signal MCUs in the 64-pin TQFP family. Validate code size, interrupt structure, timer resources, and ADC requirements before deciding.
What is the best Texas Instruments equivalent for MSP430F147IPAG?
MSP430F148IPAG is among the closest Texas Instruments alternatives because it retains the 64-pin TQFP (PAG) package, 8 MHz 16-bit architecture, 32 KB Flash class, 1 KB SRAM, 12-bit ADC, two timers, and serial interfaces. MSP430F1481IPAG is another close family option. No cross-brand drop-in replacement is established because an MCU also requires matching architecture, memory map, interrupts, peripherals, and firmware.
Where can I buy MSP430F147IPAG online?
Use the Request a Quote form on this page to request MSP430F147IPAG availability, current lead time, and a quotation for the required quantity. The form is the appropriate purchasing route for this product and supports procurement without relying on static online price information. Include the target package suffix, quantity, delivery location, and production schedule with the request.
What is the price of MSP430F147IPAG?
Current MSP430F147IPAG pricing depends on order quantity, delivery schedule, and market availability, so use the Request a Quote form on this page for a current quotation. Submit the required quantity, package suffix, ship-to region, and target date. This approach also allows procurement to confirm authorized supply, lot traceability, and delivery commitments for production builds.
What is the lead time for MSP430F147IPAG?
The current lead time depends on supplier inventory, requested quantity, and the production schedule. Use the Request a Quote form on this page and state the required quantity, delivery date, and ship-to location to obtain a current availability response. For production planning, request lot information and traceability details so the sourcing plan can account for manufacturing and inspection requirements.
Is MSP430F147IPAG in stock?
Stock levels for MSP430F147IPAG can change with order volume and supplier replenishment cycles. Use the Request a Quote form on this page to request the current availability for your exact quantity and package suffix. Include your target delivery date and location, and ask for confirmation of the manufacturer part number, condition, lot traceability, and shipment schedule before releasing the purchase order.

エンジニアリング参考データ: MSP430F147IPAG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MSP430F147IPAG when a design needs an 8 MHz 16-bit MSP430 controller with 32 KB Flash, 1 KB SRAM, a 12-bit ADC, two timers, USART, SPI, and 48 I/O pins in a 64-pin TQFP package. MSP430F148IPAG and MSP430F1481IPAG are the closest alternatives when related MSP430F14x or MSP430F14x1 behavior is acceptable and the existing resource requirements are unchanged. Select MSP430F149IPAG when larger code and data memory are more valuable than minimizing SRAM and Flash usage, while MSP430F1491IPAG combines that larger memory with F14x1-family behavior. None of these choices should be made from package dimensions alone: review memory maps, interrupts, ADC behavior, timer assignments, UART and SPI multiplexing, clock configuration, and existing firmware. A cross-brand MCU may provide similar functionality, but it is not a true drop-in replacement when the instruction set, interrupt structure, peripherals, or pin multiplexing differ.

代替品との比較

パラメータ この製品 MSP430F148IPAG MSP430F1481IPAG MSP430F1471IPAG MSP430F149IPAG MSP430F1491IPAG
Package 64-pin TQFP (PAG), 10 mm x 10 mm 64-pin TQFP (PAG), 10 mm x 10 mm 64-pin TQFP (PAG), 10 mm x 10 mm 64-pin TQFP (PAG), 10 mm x 10 mm 64-pin TQFP (PAG), 10 mm x 10 mm 64-pin TQFP (PAG), 10 mm x 10 mm
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Maximum Clock Frequency 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz 8 MHz
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC
Flash Memory 32 KB 32 KB 32 KB 32 KB 64 KB 64 KB
SRAM 1 KB 1 KB 1 KB 1 KB 2 KB 2 KB
ADC Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
General-Purpose I/O Pins 48 48 48 48 48 48
Timer Configuration 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers

主な差別化要因

  • Provides closely matched family alternatives without changing the PCB footprint (vs MSP430F148IPAG)
  • Offers a direct memory-capacity upgrade within the same family architecture (vs MSP430F149IPAG)
  • Combines a 12-bit ADC with two hardware timers and 48 I/O pins (vs MSP430F1471IPAG)
  • Uses an industrial-temperature 64-pin TQFP package for mixed-signal designs (vs MSP430F1481IPAG)

設計ノート

Treat the analog and digital sections of the PCB as separate return domains until they meet at the device ground structure. Place input-conditioning components near the ADC pins, keep high-current switching paths away from the measurement area, and route the ADC reference through a quiet section of the board. The 12-bit converter can resolve meaningful data only when supply noise, reference variation, source impedance, and PCB coupling do not dominate the input signal.

Design the 2.5 V or 3.3 V supply for the maximum CPU, ADC, timer, and interface activity rather than a sleep-state estimate. Place local bypass capacitors directly beside the appropriate supply pins and route them with short, low-impedance connections. Check brownout behavior, startup sequencing, and regulator headroom against the family datasheet. The 1 KB SRAM also makes it important to avoid interrupt-driven workloads that create excessive stack depth.

Do not assume that another 64-pin MCU is interchangeable solely because its package dimensions match. MSP430 firmware depends on the RISC instruction set, memory map, interrupt vectors, peripherals, and pin multiplexing. When moving from MSP430F147IPAG to an F14x or F14x1 alternative, review register definitions, ADC behavior, timer assignments, port functions, clock setup, startup code, and any application-specific timer or UART assumptions.

Use the SPI and USART interfaces according to the electrical characteristics and timing specified by the manufacturer. For SPI, keep the clock and data routes short, provide a defined return path, and account for signal integrity at the selected clock rate. For the UART, verify logic levels, baud-rate tolerance, and whether the selected interface pins conflict with ADC inputs. Avoid assigning critical communications to pins that would otherwise support higher-value analog functions.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer product page identifies the MSP430F147IPAG as an industrial-temperature device, but no explicit environmental or material-compliance declaration is shown for this exact ordering code.

関連検索

MSP430F147IPAG MSP430F147IPAG datasheet MSP430F147IPAG datasheet pdf MSP430F147IPAG pinout MSP430F147IPAG schematic MSP430F147IPAG equivalent MSP430F147IPAG replacement MSP430F147IPAG cross reference MSP430F147IPAG vs MSP430F148IPAG MSP430F147IPAG footprint MSP430F147IPAG application circuit MSP430F147IPAG price MSP430F147IPAG stock Texas Instruments MSP430F147IPAG MSP430F147 64 pin TQFP pinout

関連部品&用語

Texas Instruments MSP430F147IPAG MSP430F147 MSP430F148IPAG MSP430F1481IPAG MSP430F1471IPAG MSP430F149IPAG MSP430F1491IPAG MSP430 mixed-signal microcontroller microcontroller RISC architecture 16-bit RISC 12-bit ADC comparator USART SPI 64-pin TQFP PAG package surface mount 32 KB Flash 1 KB SRAM 48 I/O pins industrial control sensor acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示