MVF50NN151CMK50 - Vybrid VF5xx 32-bit MPU 500MHz 364-LFBGA | NXP
部品番号: MVF50NN151CMK50 ✓ 生産中MVF50NN151CMK50 概要
What is an ARM Cortex-A5 MPU? An MPU (microprocessor unit) is a higher-performance variant of a microcontroller that typically lacks on-chip flash and runs from external memory. The ARM Cortex-A5 is an applications-class core implementing the ARMv7-A architecture with a memory management unit (MMU), enabling full operating systems such as Linux and Android. It sits in the Cortex-A family between the Cortex-A7 (newer, more power-efficient) and the older ARM926/ARM11 cores, balancing performance with low silicon cost. NXP positions the Vybrid VF5xx family at the intersection of microcontroller-level integration and applications-processor-level performance.
Key differentiating features include hardware cryptography acceleration for secure boot and TLS, a 32-channel DMA engine, dual SDHC ports, an LCD controller with touch support, multiple CAN and UART interfaces, and a low-power real-time clock domain. The 500 MHz Cortex-A5 delivers roughly 1.4 DMIPS/MHz of integer performance, sufficient for Linux graphical user interfaces and real-time control loops.
The Vybrid architecture pairs the Cortex-A5 with a separate Cortex-M4 microcontroller-style core on higher-tier VF6xx devices, but the VF5xx line is single-core for cost-sensitive designs. The integrated L2 Ethernet switch eliminates external switch chips in gateway and HMI applications.
Typical applications include industrial human-machine interfaces (HMIs), building automation gateways, smart energy and IoT edge nodes, point-of-sale terminals, and medical patient monitors. The combination of DDR3 support and an integrated display controller makes the part attractive for graphics-rich HMIs without an external companion GPU.
A critical design consideration is PCB layout for the 364-ball LFBGA: a minimum 4-layer stack-up with continuous ground reference beneath the package is required to maintain signal integrity on the DDR3 interface. Engineers should also plan for the boot configuration pins, which select between quad-SPI flash, SD card, and UART bootstrap modes.
This page synthesizes distributor pricing, drop-in alternatives within the Vybrid family, and practical design notes that go beyond the manufacturer datasheet, helping engineers shorten the BOM selection cycle and avoid common pitfalls.
ドロップイン代替品: MVF50NN151CMK50 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MVF50NN151CMK50 （同一形状・フットプリント） — 相違点: Package, Core Architecture, Number of Cores, Security Features.
MVF50NS151CMK50
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MVF51NN151CMK50
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MVF61NN151CMK50
✅ ドロップイン価格はお問い合わせください
データシートを見る →MVF61NS151CMK50
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MVF60NN151CMK50
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MVF50NN151CMK50 最大定格＆電気的特性
| Core Architecture | ARM Cortex-A5 |
| Number of Cores | 1 |
| Core Frequency | 500 MHz |
| データバス幅 | 32-bit |
| On-chip SRAM | 1.5 MB |
| Instruction Set Architecture | ARMv7-A |
| Memory Interface | DDR2 / DDR3 with ECC support |
| Flash Memory | External (no on-chip flash) |
| Quad-SPI Interfaces | 2 (Execute-in-Place / XIP) |
| USB Controllers | 2x USB 2.0 High-Speed with integrated PHY |
| Ethernet MACs | 2x 10/100 Mbps with integrated L2 switch |
| パッケージ | 364-LFBGA (MAPBGA-364), 17x17 mm |
| 動作温度 | -40C to +85C (Industrial) |
| 実装タイプ | Surface Mount (BGA) |
| Security | No security / No secure boot (per suffix decoding) |
| RoHS ステータス | Compliant |
MVF50NN151CMK50 364-lfbga (mapbga-364), 17x17 mm ピン配置ガイド
MVF50NN151CMK50 (364-lfbga (mapbga-364), 17x17 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MVF50NN151CMK50.
詳細は データシート をご参照ください。
主な用途
MVF50NN151CMK50 の用途: 6 件s: Industrial Human-Machine Interface (HMI), Building Automation Gateway, Smart Energy / IoT Edge Node, Point-of-Sale (POS) Terminal, Medical Patient Monitor, Industrial Printer / Label Maker.
Industrial Human-Machine Interface (HMI)
The MVF50NN151CMK50 fits industrial HMI panels because it combines a 500 MHz Cortex-A5 capable of running Linux/Qt with an integrated LCD controller supporting WVGA parallel RGB panels, dual Ethernet for network redundancy, and the industrial -40C to +85C operating range. Placed at the heart of a 7-inch panel-mount HMI, it drives graphics, touch input, and fieldbus protocols (PROFINET, EtherNet/IP) from the same chip. The 1.5 MB on-chip SRAM accelerates framebuffer compositing while the DDR3 controller feeds the display pipeline.
おすすめ
Building Automation Gateway
For BACnet, KNX, or Modbus gateways bridging building automation networks to cloud services, the MVF50NN151CMK50's dual Ethernet MACs with integrated L2 switch allow two physical ports (LAN + daisy-chain) without an external switch IC. The Cortex-A5 at 500 MHz runs a Linux user-space BACnet stack while the dual quad-SPI interfaces XIP-boot from NOR flash and provide redundant firmware images. USB 2.0 ports support 802.11 Wi-Fi or Bluetooth dongles for wireless commissioning.
おすすめ
Smart Energy / IoT Edge Node
In smart-meter data concentrators and edge nodes, the MVF50NN151CMK50 provides the deterministic processing power required for DLMS/COSEM protocol parsing while keeping power consumption manageable through its multiple low-power modes. The hardware crypto (on the secure variant MVF50NS) accelerates TLS handshake for secure MQTT uploads. DDR3 support handles large time-series buffers before cloud sync. Operates fanless from -40C to +85C in outdoor enclosures.
おすすめ
Point-of-Sale (POS) Terminal
POS terminals need a Linux-capable processor with PCI-friendly security, a touchscreen interface, and reliable peripheral connectivity. The MVF50NN151CMK50's integrated LCD controller and touch interface drive the cashier display directly, the dual USB ports connect to a magnetic-stripe reader and printer, and the Cortex-A5 handles EMV transaction flows. Pairing with the secure-boot sibling MVF50NS151CMK50 meets PCI PTS POI v6 firmware-authentication requirements.
おすすめ
Medical Patient Monitor
Patient monitors require IEC 60601-1-compliant isolation but a Linux-capable processor for waveform rendering and HL7 data export. The MVF50NN151CMK50 runs a Qt-based monitor UI at 500 MHz while the dual Ethernet ports separate the bedside network from the hospital network. The Cortex-A5's MMU isolates patient-data memory from RTOS areas when paired with the dual-core VF61xx upgrade for hard real-time sampling.
おすすめ
Industrial Printer / Label Maker
Industrial label printers stream rasterized graphics from the host over USB or Ethernet, then drive thermal printheads via GPIO. The MVF50NN151CMK50's dual high-speed USB with integrated PHY directly interfaces to printhead controllers and host PCs, while the DDR2/DDR3 controller buffers large label images at high print speeds. The industrial temperature rating ensures 24/7 factory-floor operation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MVF50NN151CMK50 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MVF50NS151CMK50 | MVF51NN151CMK50 | MVF61NN151CMK50 | MVF61NS151CMK50 | MVF60NN151CMK50 |
|---|---|---|---|---|---|---|
| Package | 364-MAPBGA (17x17 mm) | 364-MAPBGA (17x17 mm) - same | 364-MAPBGA (17x17 mm) - same | 364-MAPBGA (17x17 mm) - same | 364-MAPBGA (17x17 mm) - same | 364-MAPBGA (17x17 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Number of Cores | 1 (Cortex-A5) | 1 (Cortex-A5) | 1 (Cortex-A5) | 2 (A5 + M4) | 2 (A5 + M4) | 2 (A5 + M4) |
| Cortex-A5 Frequency | 500 MHz | 500 MHz | 500 MHz | 500 MHz | 500 MHz | 500 MHz |
| On-chip SRAM | 1.5 MB | 1.5 MB | 1.5 MB | 1.5 MB | 1.5 MB | 1.5 MB |
| Hardware Security | No | Yes (secure boot, HW crypto) | No | No | Yes (secure boot, HW crypto) | No |
| Dual Ethernet + L2 Switch | Yes | Yes | Yes | Yes | Yes | Yes |
| Dual USB 2.0 with PHY | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Dual Ethernet with integrated L2 switch eliminates external switch IC （vs MVF50NS151CMK50 (secure variant))
- Single-core A5 keeps cost and power below dual-core VF61xx （vs MVF61NN151CMK50)
- Vybrid pin compatibility spans both VF5xx and VF6xx （vs MVF61NS151CMK50)
設計ノート
The 364-ball MAPBGA at 0.8 mm pitch demands a 4-layer PCB minimum with a continuous solid ground plane on the layer directly beneath the package. Microvia-in-pad is recommended for production assemblies; tented vias under the BGA will cause solder-joint voids. Use ENIG or OSP surface finish (not HASL) for fine-pitch BGA reliability. Match trace lengths for the DDR3 interface within +/- 25 mil and route DQ/DQS pairs with 100-ohm differential impedance for the DQS signals.
Estimated: at full CPU + DDR3 + dual Ethernet activity, the MVF50NN151CMK50 dissipates approximately 2.2 W. With a 4-layer JEDEC board (theta-JA ~ 18 C/W), junction rises 40 C above ambient. Provide a thermal via array (9 vias at 0.3 mm drill on 1.0 mm pitch) directly under the die shadow to reduce theta-JB. For sealed enclosures with no airflow, derate ambient to 70 C maximum.
Sequence the Vybrid power rails with a companion PMIC such as the TPS65910 or PF0100. The Vybrid requires VDD_SOC and VDD_ARM to come up before the 1.2 V DDR rail. Failure to sequence properly can cause latch-up on the DDR3 interface. Add 22 uF ceramic + 100 nF HF decoupling on every rail pin, placed within 5 mm of the BGA ball. Estimated bulk decoupling for the 1.5 V SoC rail: 4 x 22 uF X5R 0805 ceramics in parallel.
Boot mode pins (BOOT_MODE[0:1]) must be held stable during POR and not glitched by a reset supervisor. Floating boot mode pins are a frequent cause of bricked boards that appear 'dead' on first power-up. Always use 10 kohm pull-ups or pull-downs to define the boot source. Additionally, the Vybrid's JTAG TDI pin doubles as a GPIO after reset; if JTAG is not used, configure the pin as input with internal pull-up to avoid leakage current.
コンプライアンス情報
RoHS and lead-free compliance per NXP product page. AEC-Q100 not applicable - the part is not qualified to automotive standard. For automotive Vybrid derivatives see the VF5xA series.
