Texas Instruments

PCM3501E/2K - 16-Bit Mono Voice Codec | Texas Instruments

部品番号: PCM3501E/2K ✓ 生産中
2.7 V to 3.6 V Vdss 24-pin SSOP (DB) Package
MOQ: 1 |

PCM3501E/2K 概要

The Texas Instruments PCM3501E/2K is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec in a 24-pin SSOP package. It operates from a 2.7 V to 3.6 V supply and combines one analog-to-digital channel with one digital-to-analog channel for voice-band signal processing. The /2K ordering code denotes a tape-and-reel package containing 2,000 devices.

A voice codec is an interface IC that converts between analog audio signals and digital PCM data. The PCM3501E/2K belongs to the broader codec hierarchy: integrated circuit, interface IC, audio codec, and mono voice or modem codec. This device is intended for compact systems where one communication voice channel must be digitized and reproduced without the channel count or power requirements of a stereo audio codec.

The codec provides a 16-bit PCM serial interface, a mono voice or modem signal path, and operation from a 2.7 V to 3.6 V analog supply. Its low-voltage and low-power characteristics suit portable and embedded communication equipment in which the codec must operate alongside 3.3 V digital logic. The 24-pin SSOP package also supports conventional surface-mount assembly and automated production.

Because the device handles both analog conversion and digital serialization, its performance depends on correct power distribution, grounding, and interface implementation. A clean 3.3 V supply helps prevent converter reference or digital-interface disturbances from reaching the voice path. The manufacturer datasheet should be used for clock timing, analog biasing, filtering, and decoupling values because those detailed operating conditions are not reproduced on this page.

Typical uses include single-channel voice processing in modem and telephone interface equipment, compact audio communication terminals, digital answering devices, and embedded voice-capable appliances. In each case, the PCM3501E/2K serves as the bridge between an analog microphone or line-level voice signal and a digital processor or serial interface.

For a new PCB, use the 24-pin SSOP footprint and follow the pin-description table in the manufacturer datasheet when assigning analog, digital, clock, and supply connections. For an existing PCM3501E design, verify package orientation, supply sequencing, clock source, and the PCB land pattern before treating the /2K tape-and-reel ordering option as a replacement.

This page brings together the manufacturer ordering information, package details, drop-in comparison data, and practical integration guidance. It also distinguishes electrical and functional interchangeability from the distinction between tube and tape-and-reel delivery configurations, helping engineers make a more reliable sourcing and assembly decision.

ドロップイン代替品: PCM3501E/2K — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PCM3501E/2K (同一形状・フットプリント) — 相違点: Digital Interface.

Texas Instruments
Digital Interface: 16-bit serial voice-band interface

PCM3501E

✅ ドロップイン
Texas Instruments
📦 SSOP-24 (DB)
16-bit mono voice/modem codec · 16 bit · 1 mono channel · Delta-sigma ADC · Delta-sigma DAC · Differential input · Differential output · 56 kbps

価格はお問い合わせください

データシートを見る →

PCM3501E/2K 仕様

Codec Type Mono voice/modem codec
分解能 16 bit
Channel Count 1 channel
Supply Voltage Range 2.7 V to 3.6 V
Digital Interface 16-bit serial PCM
Signal Class SoundPlus voice/modem codec
パッケージ 24-pin SSOP (DB)
ピン数 24 pins
実装タイプ Surface mount
Operating Voltage 2.7 V to 3.6 V
Power Class Low power
Delivery Format Tape and reel
Reel Quantity 2,000 devices per reel
RoHS ステータス unknown
REACH Status unknown

PCM3501E/2K 24-pin ssop (db) ピン配置ガイド

PCM3501E/2K (24-pin ssop (db) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

PCM3501E/2K の 24-pin ssop (db) パッケージピン配置図

詳細なピン配置データはありません: PCM3501E/2K.

詳細は データシート をご参照ください。

主な用途

PCM3501E/2K の用途: 6 件s: Single-Channel Modem Interface, Voice Terminal and Answering Device, Portable Voice Communications, Digital Voice Processing Node, Industrial Voice Control Panel, Voice Access and Security Panel.

🌐

Single-Channel Modem Interface

The PCM3501E/2K fits a single-channel modem or telephone interface that must convert one analog voice signal into 16-bit PCM data and reproduce the decoded voice channel. Its 2.7 V to 3.6 V operating range accommodates a 3.3 V communication subsystem, while the mono codec topology avoids the channel overhead of a stereo converter. Place the codec beside the analog input and output networks, connect it to the system serial interface, and decouple the supply close to the device. Because clock and analog bias details determine usable voice performance, the implementation should follow the pin configuration, timing requirements, and reference circuit in the manufacturer datasheet rather than infer those values from the package outline.

📞

Voice Terminal and Answering Device

The PCM3501E/2K is appropriate for compact voice terminals, answering devices, and communication appliances that require one recorded or transmitted voice channel. The 16-bit mono conversion provides a straightforward PCM stream for a digital processor, and the low-voltage operation supports systems built around 3.3 V logic. Keep the microphone or line-input conditioning close to the analog pins, provide the required bypass capacitance at the supply entry, and isolate digital clock routing from the analog output path. The principal engineering trade-off is that this is a mono codec: it supports one communication voice path rather than the independent left and right channels expected in a stereo audio product, so stereo recording or playback requires another converter.

📱

Portable Voice Communications

The PCM3501E/2K can serve as the voice conversion element in portable or embedded communication equipment powered from a low-voltage 3.3 V rail. Its stated low-power design and 2.7 V to 3.6 V operating range suit compact systems, while the single 16-bit mono channel reduces component and routing requirements relative to a stereo codec. In a portable design, verify the codec supply requirement against the battery system and regulator headroom, then place the analog and bypass networks close to the package to limit board-area pickup. The SSOP package supports compact surface-mount layouts, but thermal, clock, and supply-noise performance remain dependent on correct decoupling and layout practices specified by the manufacturer.

🧩

Digital Voice Processing Node

The PCM3501E/2K fits a distributed voice-processing node that receives or produces one digital audio stream while also requiring an analog microphone or line interface. Its serial PCM interface allows the codec to connect to a communications processor, while the mono topology provides an economical conversion path for speech or modem content. Route serial data away from analog inputs, use a continuous ground reference between the analog and digital sections, and confirm clock polarity and timing against the system controller. Since the codec includes only one voice-band signal path, a node requiring simultaneous talk and listen channels must account for additional conversion resources rather than assuming stereo capability.

🏭

Industrial Voice Control Panel

The PCM3501E/2K is suitable for an industrial control panel or machine interface that needs a single voice channel for operator communication or audible prompting. Its 3.3 V-compatible operating range allows integration with conventional embedded control logic, while the 16-bit mono path provides digital voice data without requiring a high-channel-count audio converter. Place the analog front end and codec together to reduce susceptibility to switching-node interference, and use a low-impedance ground strategy that satisfies both analog return requirements and digital signal integrity. The device does not replace an audio amplifier or speaker driver; those functions remain downstream, and the complete voice chain must account for microphone biasing, line-level conditioning, and output amplification.

🎥

Voice Access and Security Panel

The PCM3501E/2K can support a voice-access module that captures one mono voice channel for recognition or communication and returns a decoded voice prompt. Its low-voltage operation is compatible with 3.3 V embedded systems, and the 24-pin SSOP package permits a relatively compact mixed-signal board. Maintain short analog traces, place bypass components at the supply pins, and keep switching-regulator and high-current return paths away from the codec's analog section to minimize interference. The converter itself does not provide voice recognition, microphone biasing, or speaker amplification, so those functions must be designed separately. Its single-channel nature makes it well matched to command-band access systems but not to simultaneous multi-microphone or full-stereo requirements.

おすすめ製品の概要

PCM3501E Texas Instruments 使用用途: Single-Channel Modem Interface, Voice Terminal and Answering Device, Portable Voice Communications, Digital Voice Processing Node, Industrial Voice Control Panel, Voice Access and Security Panel PCM3501E/2KG4 Same 24-pin SSOP codec in a tape-and-reel ordering format 使用用途: Single-Channel Modem Interface, Voice Terminal and Answering Device, Portable Voice Communications, Digital Voice Processing Node, Industrial Voice Control Panel, Voice Access and Security Panel
What is the PCM3501E/2K?
The PCM3501E/2K is a Texas Instruments low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec. According to the manufacturer product page, it is a 24-pin SSOP device intended for single-channel voice-band conversion between analog audio circuitry and a digital PCM interface. Its stated operating supply range is 2.7 V to 3.6 V.
What are the key specifications of PCM3501E/2K that engineers should know?
The PCM3501E/2K is a 16-bit mono voice/modem codec with a 2.7 V to 3.6 V supply range and a 24-pin SSOP package. According to the Texas Instruments product page, it uses a serial PCM interface and is categorized as a low-power SoundPlus codec. The /2K suffix identifies the 2,000-piece tape-and-reel ordering configuration.
Where can I download the PCM3501E/2K datasheet PDF?
The official PCM3501 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/PCM3501. According to the manufacturer ordering note, slash-orderable devices such as PCM3501E/2K are supplied in tape and reel, with /2K specifying 2,000 devices per reel. Use the pin-description and application sections in that document when finalizing the PCB.
Where can I find the PCM3501E/2K pinout?
The authoritative PCM3501E/2K pinout is the pin-description table in the Texas Instruments PCM3501 datasheet at https://www.ti.com/lit/gpn/PCM3501. The device uses a 24-pin SSOP package, but individual pin numbers and signal names must be assigned from that table rather than inferred from the ordering suffix or from a distributor thumbnail.
Is PCM3501E/2K the same as PCM3501E?
The PCM3501E/2K and PCM3501E use the same mono 16-bit voice/modem codec functionality and the same 24-pin SSOP electrical architecture, but their ordering and delivery configurations differ. The manufacturer indicates that PCM3501E/2K is supplied as a 2,000-piece tape-and-reel order, whereas PCM3501E is identified as the tube configuration.
Can PCM3501E replace PCM3501E/2K?
PCM3501E can serve as a pin-compatible alternative to PCM3501E/2K because cross-reference information identifies consistent terminals, package construction, and principal codec characteristics. The functional and electrical roles are the same, but procurement teams must confirm the required delivery format: PCM3501E/2K is the 2,000-piece tape-and-reel option, while PCM3501E is identified as the tube option.
What is the best drop-in replacement for PCM3501E/2K?
PCM3501E is the confirmed same-package drop-in alternative for PCM3501E/2K because the comparison identifies consistent terminals, package construction, 16-bit mono operation, and a 2.7 V to 3.6 V supply range. It is functionally interchangeable at the circuit level, but the ordering format differs: PCM3501E/2K specifies a 2,000-piece tape-and-reel reel while PCM3501E is listed in tube packaging.
What can replace PCM3501E/2K in an existing design?
PCM3501E can replace PCM3501E/2K in an existing 24-pin SSOP circuit when the PCB footprint, supply, clocking, and signal assignments match. Cross-reference information describes the terminals and package as consistent and the main functional characteristics as equivalent. Before substitution, verify the assembly format required by the production line, because the /2K version is specifically a tape-and-reel configuration.
Is there a cross-brand drop-in equivalent for PCM3501E/2K?
No cross-brand drop-in equivalent is established for the PCM3501E/2K. The available manufacturer comparison instead identifies PCM3501E as the directly compatible alternative, with the same 24-pin SSOP construction and equivalent mono voice/modem functionality. For a cross-brand review, submit the exact requirements through the Request a Quote form on this page so package, clock, interface, and lifecycle constraints can be evaluated together.
When should I choose PCM3501E/2K instead of PCM3501E?
Choose PCM3501E/2K when automated surface-mount assembly and reel-based replenishment are required, because the manufacturer defines /2K as a single 2,000-piece tape-and-reel order. Choose PCM3501E when the tube configuration is appropriate for the production process. Their codec functionality is not the deciding factor; the required physical delivery format and assembly flow should determine the selection.
Is PCM3501E/2K suitable for 3.3 V voice communication equipment?
The PCM3501E/2K is suitable for 3.3 V voice communication equipment because its stated operating supply range includes 3.3 V. It provides a 16-bit mono voice/modem signal path in a 24-pin SSOP package. The final design must still satisfy the timing, filtering, grounding, and decoupling requirements stated in the Texas Instruments PCM3501 datasheet.
Where to buy PCM3501E/2K online?
Use the Request a Quote form on this page to request PCM3501E/2K availability, lot conditions, and an exact MPN quotation. The device is identified as a Texas Instruments 2,000-piece tape-and-reel order, so the quote should specify PCM3501E/2K rather than the tube-order PCM3501E and should state the required shipment destination and quantity.
What is the price of PCM3501E/2K?
The current commercial price for PCM3501E/2K is obtained through the Request a Quote form on this page. Submit the required quantity, reel configuration, shipping destination, and target date so the quotation reflects the exact 2,000-piece tape-and-reel MPN. Avoid substituting PCM3501E without confirming that tube packaging is acceptable to the receiving and assembly processes.
What is the lead time and stock status for PCM3501E/2K?
Current stock status and lead time for PCM3501E/2K should be confirmed through the Request a Quote form on this page. Include the reel quantity of 2,000 devices, shipment country, destination, and required arrival date. This request preserves the exact ordering code and lets the supplier distinguish the /2K tape-and-reel configuration from the tube version.
Is PCM3501E/2K still active?
The PCM3501E/2K is presented as an orderable Texas Instruments product with an official part-details page and manufacturer datasheet. For current manufacturing, documentation, and supply confirmation, use the Request a Quote form on this page with the exact MPN. Lifecycle status can change, so long-term programs should request a written lifecycle and date-code statement at the time of quotation.
How should PCM3501E/2K be handled in a low-noise PCB design?
Place the PCM3501E/2K power connections and its required bypass components close to the device, and route analog and digital return currents carefully to prevent codec signals from sharing noisy paths. Although 3.3 V lies within the stated 2.7 V to 3.6 V operating range, clocking, grounding, and analog-filter implementation must follow the manufacturer application guidance to preserve usable voice-channel performance.

エンジニアリング参考データ: PCM3501E/2K — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose PCM3501E/2K when the PCB already matches the Texas Instruments 24-pin SSOP codec layout and production requires a 2,000-piece tape-and-reel delivery. Choose PCM3501E when the identical electrical design is acceptable but the assembly flow specifically calls for tube packaging. The codec is appropriate for one voice-band channel, 3.3 V communication equipment, modems, and embedded voice nodes because it provides 16-bit mono PCM conversion without the channel count of a stereo codec. It is not the preferred choice for simultaneous stereo recording, multichannel conferencing, or systems requiring multiple independent analog inputs. Before substitution, verify the PCB footprint, pin assignment, clock source, supply arrangement, analog filters, and the manufacturer's operating limits. Also confirm the physical delivery format, since that is the principal distinction between the two orderable configurations.

代替品との比較

パラメータ この製品 PCM3501E
Package 24-pin SSOP (DB) 24-pin SSOP (DB)
Brand Texas Instruments Texas Instruments
Codec Function Mono voice/modem codec Mono voice/modem codec
Resolution 16 bit 16 bit
Supply Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V
Digital Interface 16-bit serial PCM 16-bit serial PCM
Signal Class SoundPlus voice/modem codec SoundPlus voice/modem codec
Delivery Format Tape and reel, 2,000 devices per reel Tube
Pin Compatibility 24-pin SSOP footprint Consistent terminals and package
Power Class Low power Low power

主な差別化要因

  • Production-friendly 2,000-piece reel format (vs PCM3501E)
  • Direct pin-compatible reuse of an existing codec footprint (vs PCM3501E)
  • Equivalent single-channel voice conversion (vs PCM3501E)

設計ノート

Treat the analog and digital sections as separate return paths even though both operate from the same low-voltage supply. Place the required bypass capacitors at the supply pins, keep analog input and output traces short, and avoid routing serial clock or data lines beneath the analog signal area. The 24-pin SSOP footprint should follow the land pattern and pin-one orientation in the Texas Instruments package drawing.

Do not interchange PCM3501E/2K and PCM3501E without recording the delivery requirement. The electrical codec functions and 24-pin SSOP package are consistent, but /2K specifies a 2,000-piece tape-and-reel order while PCM3501E is identified as a tube configuration. Confirm the assembler, incoming-inspection process, quantity planning, and moisture-handling requirements before changing the order code.

Use a continuous ground plane and keep high-current switching or digital return currents away from the codec analog pins. Follow the manufacturer reference configuration for clock generation, analog bias, input and output filtering, and decoupling. Because the codec converts one analog voice channel while sending serial PCM data, clock-edge timing and analog settling must both be satisfied before increasing system volume or operating rate.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated in the cited product information.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PCM3501E/2K datasheet PCM3501E/2K pinout PCM3501E/2K datasheet pdf PCM3501E/2K equivalent PCM3501E/2K replacement PCM3501E/2K cross reference PCM3501E vs PCM3501E/2K PCM3501E/2K footprint Texas Instruments PCM3501E/2K PCM3501E/2K price PCM3501E/2K stock PCM3501E/2K application circuit

関連部品&用語

Texas Instruments PCM3501E/2K PCM3501E PCM3501E/2KG4 mono voice/modem codec audio codec codec interface IC integrated circuit semiconductor 16-bit PCM SoundPlus 2.7 V to 3.6 V supply low-power codec 24-pin SSOP SSOP package family surface mount SMD packaging voice-band interface modem interface serial interface analog-to-digital conversion digital-to-analog conversion tape and reel telecommunications
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示