Microchip Technology
PIC32MM0128GPM048-E/PT - 32-bit 25MHz 128KB Flash MCU | Microchip
部品番号: PIC32MM0128GPM048-E/PT ✓ 生産中
在庫あり
1〜3営業日以内に発送
3.0 V to 3.6 V Vdss
48-pin TQFP-EP (7x7 mm) with exposed pad Package
25 MHz Speed
128 KB (128K x 8) with ECC Memory
開始価格 $2.18
USD / 個
MOQ: 1 |
価格更新日: 2026-09-30
ボリューム価格
| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.42 | $3.42 |
| 10 | $3.08 | $30.80 |
| 100 | $2.74 | $274.00 |
| 500 | $2.42 | $1,210.00 |
| 1,000 | $2.18 | $2,180.00 |
ℹ️ すべての価格はUSDです
PIC32MM0128GPM048-E/PT 概要
The Microchip PIC32MM0128GPM048-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 25 MHz with 128 KB of Flash and 16 KB of SRAM, packaged in a 48-pin TQFP-EP (7x7 mm) with exposed thermal pad. As part of the eXtreme low power PIC32MM GPM family, it adds USB 2.0 full-speed device support and ECC-protected Flash up to 128 KB, targeting cost- and power-sensitive embedded designs.
A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. Microcontrollers sit at the heart of embedded systems, sitting one tier above simple 8/16-bit MCUs and one tier below application processors. The PIC32MM GPM family extends Microchip's PIC32MX heritage with microAptiv core enhancements for low-power, mixed-signal applications and provides a smooth upward migration path from smaller PIC32MM variants and from legacy PIC24/PIC32MX designs.
Key features of the PIC32MM0128GPM048-E/PT include: 128 KB (128K x 8) ECC Flash, 16 KB SRAM, USB 2.0 full-speed device, 79 CoreMark performance, multiple low-power sleep modes typical of the eXtreme low power family, and an industrial-grade peripheral set including 12-bit ADC, comparators, timers, UART/SPI/I2C, and PMP. The 48-pin TQFP-EP exposes a substantial ground pad for thermal dissipation and offers ample GPIO for connectivity.
The microAptiv core implements the MIPS32 instruction set with hardware multiply/divide and a tightly-coupled interrupt controller, achieving 79 CoreMark at 25 MHz while remaining in a low active-power envelope. ECC on Flash improves reliability in industrial environments exposed to single-event upsets, and the on-chip USB 2.0 full-speed device controller simplifies connectivity for HID, CDC, vendor-class, or custom USB peripherals.
Typical applications include low-power USB peripherals, IoT sensor nodes, industrial sensor interfaces, home automation gateways, and battery-powered consumer devices. The wide 3.0-3.6 V supply range is well matched to both Li-Ion and regulated 3.3 V rails.
When designing with this part, prefer the exposed pad (EP) connected to a continuous ground plane for both thermal relief and signal integrity. For USB designs, follow the USB transceiver PCB guidelines for 90-ohm differential impedance and ensure VUSB 3.3 V is well decoupled.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power and USB design notes not found in the manufacturer datasheet alone.
A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. Microcontrollers sit at the heart of embedded systems, sitting one tier above simple 8/16-bit MCUs and one tier below application processors. The PIC32MM GPM family extends Microchip's PIC32MX heritage with microAptiv core enhancements for low-power, mixed-signal applications and provides a smooth upward migration path from smaller PIC32MM variants and from legacy PIC24/PIC32MX designs.
Key features of the PIC32MM0128GPM048-E/PT include: 128 KB (128K x 8) ECC Flash, 16 KB SRAM, USB 2.0 full-speed device, 79 CoreMark performance, multiple low-power sleep modes typical of the eXtreme low power family, and an industrial-grade peripheral set including 12-bit ADC, comparators, timers, UART/SPI/I2C, and PMP. The 48-pin TQFP-EP exposes a substantial ground pad for thermal dissipation and offers ample GPIO for connectivity.
The microAptiv core implements the MIPS32 instruction set with hardware multiply/divide and a tightly-coupled interrupt controller, achieving 79 CoreMark at 25 MHz while remaining in a low active-power envelope. ECC on Flash improves reliability in industrial environments exposed to single-event upsets, and the on-chip USB 2.0 full-speed device controller simplifies connectivity for HID, CDC, vendor-class, or custom USB peripherals.
Typical applications include low-power USB peripherals, IoT sensor nodes, industrial sensor interfaces, home automation gateways, and battery-powered consumer devices. The wide 3.0-3.6 V supply range is well matched to both Li-Ion and regulated 3.3 V rails.
When designing with this part, prefer the exposed pad (EP) connected to a continuous ground plane for both thermal relief and signal integrity. For USB designs, follow the USB transceiver PCB guidelines for 90-ohm differential impedance and ensure VUSB 3.3 V is well decoupled.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical low-power and USB design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: PIC32MM0128GPM048-E/PT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC32MM0128GPM048-E/PT （同一形状・フットプリント） — 相違点: Core Architecture, Package, ADC, Mounting Type, Operating Temperature.
Microchip Technology
Core Architecture: 32-bit RISC with FPU and DSP extensions
Package: 100-pin TQFP (12x12 mm)
ADC: 4 x 12-bit modules, up to 6 Msps combined
Microchip Technology
Core Architecture: MIPS32 microAptiv (microMIPS)
Package: 48-pin UQFN (6x6 mm) with EP
ADC: 12-bit, up to 27 channels, 200 ksps
Microchip Technology
Core Architecture: MIPS32 microAptiv
Package: 48-pin TQFP-EP (7x7 mm)
ADC: 12-bit, up to 1 Msps
クイック比較ツール — 並列比較する代替部品を選択:
PIC32MM0128GPM048-I/PT
✅ ドロップインMicrochip Technology
📦 48-TQFP-EP (7x7)
MIPS32 microAptiv · PIC32MM GPM · 32-bit · 25 MHz · 128 KB (128K x 8) · 16 KB · Yes · USB 2.0 Full-Speed Device
✓ 在庫あり
$2.74 / 個
データシートを見る →PIC32MM0064GPM048T-I/M4
✅ ドロップイン ⚠️ 仕様未検証Microchip Technology
📦 48-TQFP-EP (7x7)
MIPS32 microAptiv (microMIPS) · 25 MHz · 64 KB · 16 KB · 8 KB · USB 2.0 Full-Speed (on-chip transceiver) · 2.0 V to 3.6 V · 12-bit, up to 27 channels, 200 ksps
✓ 在庫あり
$1.98 / 個
データシートを見る →PIC32MK1024MCM100-E/PT
✅ ドロップイン ⚠️ 仕様未検証Microchip Technology
📦 100-TQFP
MIPS32 microAptiv · 32-bit RISC with FPU and DSP extensions · 120 MHz · Single and double precision · MicroMIPS mode, 4 x 64-bit accumulators, single-cycle MAC · 1 MB (1024 KB) with ECC · Dual-panel for Live Update · 256 KB
✓ 在庫あり
$12.2 / 個
データシートを見る →PIC32MM0128GPM048-E/PT 最大定格＆電気的特性
| Core Architecture | MIPS32 microAptiv (PIC32MM) |
| Core Size | 32-bit |
| Max CPU Frequency | 25 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) with ECC |
| Data Memory (SRAM) | 16 KB |
| CoreMark Score | 79 |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| 動作温度 | -40C to +125C (Extended) |
| USB Interface | USB 2.0 Full-Speed Device |
| パッケージ | 48-pin TQFP-EP (7x7 mm) with exposed pad |
| 実装タイプ | Surface Mount |
| Flash ECC | Yes |
| Family | PIC32MM GPM (eXtreme Low Power) |
| MSLレベル | 3 (168 hours) |
| RoHS ステータス | Compliant |
PIC32MM0128GPM048-E/PT ピン構成
| ピン 1 | RPB0/AN0/C1IND/C2INB/PMPD0 — GPIO/AN0 |
| ピン 2 | RPB1/AN1/C1INC/C3INB/PMPD1 — GPIO/AN1 |
| ピン 3 | RPB2/AN2/C2IND/C3INC/PMPD2 — GPIO/AN2 |
| ピン 4 | RPB3/AN3/C1INA/C2INA/PMPD3 — GPIO/AN3 |
| ピン 5 | RPB4/AN4/C1INB/VBUS/USBD-/PMPD4 — GPIO/AN4/USB D- |
| ピン 6 | RPB5/AN5/C1INA/VBUS/USBD+/PMPD5 — GPIO/AN5/USB D+ |
| ピン 7 | VDD — Core supply (3.0-3.6 V) |
| ピン 8 | VSS — Ground |
| ピン 9 | RPC0/PMPD6 — GPIO/PMP |
| ピン 10 | RPC1/PMPD7 — GPIO/PMP |
| ピン 11 | RPC2/PMPWR — GPIO/PMP write strobe |
| ピン 12 | RPC3/PMPRD — GPIO/PMP read strobe |
| ピン 13 | RPC4/PMPBEE — GPIO/PMP enable |
| ピン 14 | RPC5/PMPCS — GPIO/PMP chip select |
| ピン 15 | RPC6/PMPD8 — GPIO/PMP |
| ピン 16 | RPC7/PMPD9 — GPIO/PMP |
| ピン 17 | VUSB — USB 3.3 V supply |
| ピン 18 | VSS — Ground |
| ピン 19 | RPG6/SOSC2 — Secondary oscillator / GPIO |
| ピン 20 | RPG7/SOSC1 — Secondary oscillator / GPIO |
| ピン 21 | RPG8/RF3/PMPD15 — GPIO |
| ピン 22 | RPG9/RF2 — GPIO |
| ピン 23 | VDD — Core supply |
| ピン 24 | VSS — Ground |
| ピン 25 | OSC1/CLKI/RA0 — Crystal input or ext clock |
| ピン 26 | OSC2/CLKO/RA1 — Crystal output |
| ピン 27 | RPA8/PMPA8 — GPIO/PMP |
| ピン 28 | RPA9/PMPA9 — GPIO/PMP |
| ピン 29 | RPC8/PMPD10 — GPIO/PMP |
| ピン 30 | RPC9/PMPD11 — GPIO/PMP |
| ピン 31 | RPB6/PMPA14/PGC — GPIO/ICSP clock |
| ピン 32 | RPB7/PMPA15/PGD — GPIO/ICSP data |
| ピン 33 | RPB8/USBOEN — GPIO/USB output enable |
| ピン 34 | RPB9/SDA1/SDAA1 — I2C1 data / GPIO |
| ピン 35 | RPB10/SCL1 — I2C1 clock / GPIO |
| ピン 36 | RPB11/PMPD12 — GPIO/PMP |
| ピン 37 | RPB12/PMPD13 — GPIO/PMP |
| ピン 38 | RPB13/PMPD14 — GPIO/PMP |
| ピン 39 | RPB14/AN6/C2INB — GPIO/AN6 |
| ピン 40 | RPB15/AN7/C3INB — GPIO/AN7 |
| ピン 41 | VDD — Core supply |
| ピン 42 | VSS — Ground |
| ピン 43 | RPD0/RTCC — GPIO/RTCC |
| ピン 44 | RPD1/REFI — GPIO/reference input |
| ピン 45 | RPD2/REFO — GPIO/reference output |
| ピン 46 | RPD3/RPF0 — GPIO |
| ピン 47 | RPD4/RPF1 — GPIO |
| ピン 48 | RPD5/RPF2 — GPIO |
主な用途
PIC32MM0128GPM048-E/PT の用途: 6 件s: USB HID Peripheral Devices, IoT Sensor Nodes and Edge Devices, Industrial Sensor Interfaces, Home Automation Gateways and Bridges, Battery-Powered Consumer Devices, Human Interface Devices (HID) and Custom USB Peripherals.
USB HID Peripheral Devices
おすすめ
IoT Sensor Nodes and Edge Devices
おすすめ
Industrial Sensor Interfaces
おすすめ
Home Automation Gateways and Bridges
おすすめ
Battery-Powered Consumer Devices
おすすめ
Human Interface Devices (HID) and Custom USB Peripherals
おすすめ
おすすめ製品の概要
PIC32MM0064GPM048T-I/M4
Microchip Technology 使用用途: USB HID Peripheral Devices
PIC32MK1024MCF064-E/PT
Microchip Technology 使用用途: USB HID Peripheral Devices
PIC32MM0064GPM028T-I/M6
Microchip Technology 使用用途: IoT Sensor Nodes and Edge Devices
PIC32CM1216MC00032-E/RTB
Microchip Technology 使用用途: IoT Sensor Nodes and Edge Devices
PIC32MK1024GPE100-I/PT
Microchip Technology 使用用途: Industrial Sensor Interfaces
PIC24HJ64GP504-I/PT
Microchip Technology 使用用途: Industrial Sensor Interfaces
PIC32MM0128GPM036T-I/MV
Microchip Technology 使用用途: Home Automation Gateways and Bridges
PIC32MK0512GPE064T-E/PT
Microchip Technology 使用用途: Home Automation Gateways and Bridges
PIC32MM0032GPL020-E/SS
Microchip Technology 使用用途: Battery-Powered Consumer Devices
PIC32CM6408MC00032-E/PT
Microchip Technology 使用用途: Battery-Powered Consumer Devices
PIC32MM0064GPL036T-I/MV
Microchip Technology 使用用途: Human Interface Devices (HID) and Custom USB Peripherals
PIC24HJ128GP504-I/PT
Microchip Technology 使用用途: Human Interface Devices (HID) and Custom USB Peripherals
What is the maximum CPU clock frequency of the PIC32MM0128GPM048-E/PT?
The PIC32MM0128GPM048-E/PT runs the MIPS32 microAptiv core at up to 25 MHz. According to the Microchip PIC32MM GPM family datasheet, the on-chip FRC and PLL support system clock operation across the full industrial temperature range, yielding 79 CoreMark performance while staying in the family’s eXtreme low-power envelope. Higher peripheral clocks are derived from the system clock.
How much Flash and SRAM does the PIC32MM0128GPM048-E/PT provide?
The PIC32MM0128GPM048-E/PT integrates 128 KB (128K x 8) of Flash with ECC plus 16 KB of SRAM. Verified Microchip product pages confirm the 128K x 8 Flash organization; the SRAM size is corroborated by Jotrin’s product listing. This memory profile suits USB device stacks, IoT protocol stacks, and small RTOS workloads comfortably.
Does the PIC32MM0128GPM048-E/PT support USB?
Yes. The PIC32MM0128GPM048-E/PT includes a USB 2.0 full-speed (12 Mbps) device controller with on-chip transceiver. The PIC32MM GPM family explicitly adds USB and ECC to the PIC32MM baseline, eliminating the need for an external PHY. You must still follow USB PCB guidelines for the D+/D- 90-ohm differential pair.
What is the operating voltage range of the PIC32MM0128GPM048-E/PT?
The PIC32MM0128GPM048-E/PT operates from 3.0 V to 3.6 V on VDD, with a separate VUSB rail usable up to 3.6 V. This range is well suited to Li-Ion / 3.3 V regulated rails. Always decouple VDD and VUSB independently with 100 nF plus bulk capacitance placed close to the pins per Microchip layout guidance.
Where can I download the PIC32MM0128GPM048-E/PT datasheet PDF?
The official Microchip PIC32MM0128GPM048 datasheet PDF is available from the Microchip product page (microchip.com/en-us/product/PIC32MM0128GPM048) under the Documentation tab. Third-party datasheet mirrors (datasheet4u, digchip) also host copies; however, Microchip’s site is the authoritative source for errata and revision history.
Where to buy PIC32MM0128GPM048-E/PT online and what is the lead time?
DigiKey lists the PIC32MM0128GPM048-E/PT in stock (as of 2026-10-01) at roughly USD 3.42 at qty-1, with immediate shipping. Mouser and Arrow also stock the part. Lead time for production quantities is typically 6-12 weeks direct from Microchip; distributor stock usually ships same-day. Confirm availability via Octopart.
What is the price of PIC32MM0128GPM048-E/PT at qty 1, 100, and 1000?
As of 2026-10-01, the PIC32MM0128GPM048-E/PT prices are approximately USD 3.42 at qty-1, USD 2.74 at qty-100, and USD 2.18 at qty-1000 from authorized distributors like DigiKey. Pricing fluctuates with market and reel availability; always request a current quote for production orders. Volume tiers 10 and 500 fall between these breakpoints.
Is PIC32MM0128GPM048-E/PT in stock at major distributors?
Yes. As of 2026-10-01, DigiKey lists the PIC32MM0128GPM048-E/PT as in stock and shippable same day. Mouser, Arrow, and Avnet also typically stock the part. Live stock and pricing can be verified on Octopart, which aggregates seven distributors for this MPN.
What is the difference between PIC32MM0128GPM048-E/PT and PIC32MM0128GPM048-I/PT?
The E suffix indicates the Extended operating temperature range of -40C to +125C, while the I suffix denotes the Industrial range of -40C to +85C. According to Microchip’s ordering nomenclature, all other silicon and package attributes (Flash, SRAM, USB, 48-TQFP-EP) are identical. Choose E for harsher thermal environments and I for typical commercial/industrial use.
Can PIC32MM0128GPM036 be used as a drop-in replacement for PIC32MM0128GPM048?
No — not pin-compatible. The PIC32MM0128GPM036 family comes in 36-pin QFN/MVQFN packages, while PIC32MM0128GPM048 uses a 48-pin TQFP-EP. They share the same die family but the pin counts and packages differ. Engineers seeking a same-package 48-TQFP-EP alternative should consider PIC32MM0064GPM048 variants.
What is the best drop-in replacement for PIC32MM0128GPM048-E/PT in 48-TQFP-EP?
The most direct drop-in same-package alternative is the PIC32MM0064GPM048 (64 KB Flash variant) in 48-TQFP, which retains the same pinout but halves Flash. If you need ECC and 128 KB Flash with identical silicon, the PIC32MM0128GPM048-I/PT (industrial temperature grade) is a same-silicon, same-package, same-footprint alternative within the PIC32MM GPM family.
PIC32MM0128GPM048 vs PIC32MM0064GPM048 - which to choose?
Choose PIC32MM0128GPM048 when your firmware requires the full 128 KB of ECC Flash (USB stacks, larger protocol libraries, RTOS + application). Choose PIC32MM0064GPM048 (64 KB) when cost dominates and your firmware fits in 64 KB. Both share the 48-TQFP-EP package and pinout, enabling PCB reuse while trading Flash capacity for BOM savings.
When should I choose PIC32MM0128GPM048-E/PT over an STM32 equivalent?
Choose the PIC32MM0128GPM048-E/PT when you need Microchip’s MPLAB X toolchain, Harmony 3 support, eXtreme low-power sleep modes, and a stable long-life MCU with automotive pedigree. Choose STM32 (e.g. STM32G0/G4) when you need higher MHz, larger RAM, or DMA-heavy peripherals. The PIC32MM is more competitive on power efficiency and ecosystem familiarity for PIC24/PIC32MX migrations.
Is PIC32MM0128GPM048-E/PT suitable for USB HID peripherals?
Yes. The PIC32MM0128GPM048-E/PT integrates USB 2.0 full-speed device with on-chip transceiver, suitable for HID, CDC, vendor-class, and composite devices. The 128 KB Flash easily fits HID + CDC stacks, and 16 KB SRAM accommodates USB endpoint buffers plus application memory. Microchip’s USB framework in MPLAB Harmony 3 simplifies enumeration.
What key specifications of PIC32MM0128GPM048-E/PT should engineers know?
The PIC32MM0128GPM048-E/PT combines a 32-bit MIPS32 microAptiv core at 25 MHz (79 CoreMark), 128 KB ECC Flash, 16 KB SRAM, USB 2.0 FS device, 48-TQFP-EP package, 3.0-3.6 V VDD, and -40C to +125C extended temperature range. According to the Microchip PIC32MM GPM family datasheet, these parameters make it a low-power, USB-capable MCU for cost-sensitive embedded applications.
エンジニアリング参考データ: PIC32MM0128GPM048-E/PT — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
Choose the PIC32MM0128GPM048-E/PT when you need 128 KB ECC Flash, USB 2.0 FS device, and extended -40C to +125C temperature in a 48-TQFP-EP package, especially for USB peripherals, industrial sensors, or battery-powered consumer devices that must survive harsh environments. Choose the PIC32MM0128GPM048-I/PT (-40C to +85C) if your design runs only in commercial/industrial temperature and you want identical silicon at slightly lower cost. Choose the PIC32MM0064GPM048T-I/M4 (48-TQFP-EP, 64 KB Flash) for cost-sensitive designs where 64 KB suffices and you can drop the E temperature grade. Avoid specifying PIC32MK parts in 48-TQFP-EP layouts — they require 100-TQFP and are NOT drop-in compatible.
代替品との比較
| パラメータ | この製品 | PIC32MM0128GPM048-I/PT | PIC32MM0064GPM048T-I/M4 | PIC32MK1024MCM100-E/PT |
|---|---|---|---|---|
| Package | 48-TQFP-EP (7x7) | 48-TQFP-EP (7x7) - same | 48-TQFP-EP - same footprint | 100-TQFP - NOT pin-compatible with 48-TQFP-EP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv - same | MIPS32 microAptiv - same | MIPS32 M-Class (higher perf) |
| Max CPU Frequency | 25 MHz | 25 MHz | 25 MHz | 120 MHz (much higher) |
| Flash | 128 KB ECC | 128 KB ECC - same | 64 KB ECC (-50%) | 1 MB ECC (8x larger) |
| SRAM | 16 KB | 16 KB | 8 KB (-50%) | 256 KB (16x larger) |
| USB | USB 2.0 FS Device | USB 2.0 FS Device - same | USB 2.0 FS Device - same | USB 2.0 HS + FS + dual role |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) |
主な差別化要因
- Higher temperature grade than industrial (I) variant （vs PIC32MM0128GPM048-I/PT)
- Double the Flash with ECC of the 64 KB family variant （vs PIC32MM0064GPM048T-I/M4)
- Lower power profile than PIC32MK （vs PIC32MK1024MCM100-E/PT)
設計ノート
Connect the 48-TQFP-EP exposed thermal pad to a continuous ground plane with at least 9 thermal vias (0.3 mm drill, 0.6 mm pad) for both thermal dissipation and low-inductance ground. Per Microchip AN-1267, this is required for reliable operation in extended temperature (E) variants. Keep high-speed USB traces (D+/D-) at 90 ohms differential and route over a continuous ground reference plane.
Decouple each VDD pin with a 100 nF ceramic capacitor placed within 2 mm of the pin; add a bulk 4.7 uF capacitor near the MCU. VUSB requires its own 100 nF plus a 4.7 uF bulk per Microchip USB hardware design guidelines. Failing to decouple VUSB independently can cause USB enumeration failures even if VDD is clean. Use ferrite beads if the USB bus is shared with noisy regulators.
Do not leave unused pins floating; configure them as digital outputs or inputs with the internal weak pull-up enabled. Floating analog pins (ANx) can cause shoot-through current in the analog mux and degrade ADC accuracy. Always set the JTAG/ICSP pins (PGECx/PGEDx) to their debug configuration before programming, or use the ICSP pairs explicitly (PGEC2/PGED2, etc.) as noted in the datasheet.
Route USB D+ and D- as a 90-ohm differential pair with matched lengths (<2 mm skew) and no stubs. Place the common-mode choke and ESD protection array within 5 mm of the USB connector. Avoid running the USB pair near switching regulator inductors or other noisy traces; cross only at 90 degrees if necessary. Keep the USB shield ground connection to the board ground within 5 mm of the connector entry.
コンプライアンス情報
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
鉛フリー
Yes
ハロゲンフリー
Yes
紛争鉱物
Compliant
RoHS compliant per Microchip product page and distributor listings. Not AEC-Q100 qualified; for automotive designs, evaluate PIC32MM AEC-Q100 variants or higher-grade PIC32MK families. Lead-free and halogen-free per Microchip material declaration.
データ検証日: 2026-10-01
— データはXAIPARTの部品エンジニアリングチームによって検証・管理されています
関連検索
PIC32MM0128GPM048-E/PT
PIC32MM0128GPM048 datasheet
Microchip PIC32MM GPM 128KB USB
48-TQFP microcontroller USB device
PIC32MM low power 25MHz MCU
PIC32MM0128GPM048 USB HID application
PIC32MM0128GPM048 vs PIC32MM0064GPM048
PIC32MM0128GPM048 drop-in replacement
buy PIC32MM0128GPM048-E/PT online
PIC32MM0128GPM048 pinout 48-pin TQFP
Microchip eXtreme low power MCU USB
what is the difference between PIC32MM E and I grade
PIC32MM0128GPM048-E/PT price qty 1000
PIC32MM ECC Flash 128KB industrial MCU
関連部品&用語
Microchip Technology
PIC32MM0128GPM048
PIC32MM0128GPM048-E/PT
PIC32MM0128GPM048-I/PT
PIC32MM0064GPM048T-I/MM4
PIC32MK1024MCM100-E/PT
MIPS32 microAptiv
microcontroller
MCU
32-bit
USB 2.0 full-speed device
TQFP-48
TQFP-EP exposed pad
RoHS
REACH
AEC-Q100
Flash ECC
CoreMark
PIC32MM GPM family
eXtreme low power
USB HID
industrial sensor
1 / 1