RTAX2000D-CQ352B - 2M-Gate Rad-Tolerant FPGA, CQFP-352 | Microchip
部品番号: RTAX2000D-CQ352B ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4200 | $4,200.00 |
| 10 | $3980 | $39,800.00 |
| 100 | $3650 | $365,000.00 |
| 500 | $3350 | $1,675,000.00 |
| 1,000 | $3100 | $3,100,000.00 |
RTAX2000D-CQ352B 概要
A radiation-tolerant FPGA is a programmable logic device qualified for space-flight environments where total ionizing dose (TID) and single-event effects threaten conventional SRAM FPGAs. Within the power-management hierarchy of space avionics, the RTAX family sits in the on-board data processing tier, providing single-chip glueless logic that is live at power-up because its antifuse configuration is permanently programmed.
Key features include antifuse one-time-programmable interconnect immune to configuration upsets, embedded SRAM blocks with built-in FIFO control logic, segmentable clock resources, chip-wide highway routing, and carry logic for arithmetic chains. The D-suffix die is screened with tighter ICCA current limits at 125C final electrical test compared to the standard RTAX2000S, supporting high-reliability programs.
Architecturally, the RTAX2000D derives from the commercial Axcelerator family, using a 0.15-micron CMOS process with metal-to-metal antifuse elements. This yields low static power, no configuration PROM requirement, and no SEE-sensitive configuration memory, a decisive advantage over SRAM-based FPGAs in orbit.
Typical applications include satellite payload data processing, spacecraft bus command and telemetry controllers, sensor interface and formatting logic, and radiation-hardened reconfigurable computing modules.
Design-wise, plan the migration path: prototype against Axcelerator commercial parts using the footprint-compatible adaptor board and EDIF netlist/pinout conversion methodology described in the manufacturer datasheet before committing to the one-time-programmable RTAX device.
This page synthesizes distributor availability, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet.
ドロップイン代替品: RTAX2000D-CQ352B — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: RTAX2000D-CQ352B （同一形状・フットプリント） — 相違点: Package, Configuration, Technology, Family, Logic Cells.
クイック比較ツール — 並列比較する代替部品を選択:
RTAX2000D-CQ352E
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →RTAX2000D-CQ352V
✅ ドロップイン✓ 在庫あり
$2560 / 個
データシートを見る →RTAX2000D-1CQ352V
✅ ドロップイン✓ 在庫あり
$3950 / 個
データシートを見る →RTAX2000DL-CQ352B
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →RTAX2000DL-1CQ352E
✅ ドロップイン✓ 在庫あり
$2300 / 個
データシートを見る →RTAX4000D-CQ352B
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →RTAX2000D-CQ352B 最大定格＆電気的特性
| Family | RTAX-S/SL and RTAX-DSP Radiation-Tolerant FPGAs |
| Equivalent System Gates | 2000000 |
| Logic Cells | 29568 |
| CLBs | 19712 |
| Core Supply Voltage | 1.5 V nominal (1.425 V to 1.575 V) |
| Process Technology | CMOS antifuse |
| Configuration Type | One-time programmable antifuse, live at power-up |
| Embedded Memory | Embedded SRAM with built-in FIFO control logic |
| Clocking Features | Segmentable clocks, chip-wide highway routing |
| Arithmetic Support | Carry logic |
| パッケージ | CQFP-352 ceramic quad flat pack |
| Screening / Speed Grade | B (burn-in screening); D suffix = tighter ICCA limits at 125C final test |
| 実装タイプ | Surface Mount |
| Application Domain | Space-flight systems |
| Radiation Tolerance | Radiation-tolerant (TID/SEE per family datasheet) |
RTAX2000D-CQ352B cqfp-352 ceramic quad flat pack ピン配置ガイド
RTAX2000D-CQ352B (cqfp-352 ceramic quad flat pack パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: RTAX2000D-CQ352B.
詳細は データシート をご参照ください。
主な用途
RTAX2000D-CQ352B の用途: 6 件s: Satellite Payload Data Processing, Spacecraft Bus Command and Telemetry, Radiation-Hardened Reconfigurable Computing Modules, Star Tracker and Imager Interface Logic, Launcher and Avionics Interface Bridging, Prototype-to-Flight Migration Flow.
Satellite Payload Data Processing
The RTAX2000D-CQ352B fits satellite payload processing because its 2,000,000 equivalent gates and 29,568 logic cells absorb sensor formatting, packetization, and front-end compression logic in a single live-at-power-up device. The antifuse fabric has no configuration memory to upset under heavy-ion flux, eliminating the SEE-driven reconfiguration loops that burden SRAM FPGAs, while embedded SRAM blocks with FIFO control handle burst buffering between high-rate detectors and downlink encoders. In a typical chain the FPGA sits between the payload sensor and a spaceWire or LVDS formatter, with 1.5V core and banked I/O rails; the one-time-programmable fabric adds no switching-configuration overhead, but designers must budget the fixed logic partition carefully since the antifuse cannot be rewritten after flight-unit programming.
おすすめ
Spacecraft Bus Command and Telemetry
Spacecraft bus controllers benefit from the RTAX2000D-CQ352B because its D-level die screening (tighter ICCA limits at 125C final electrical test) and B burn-in screening satisfy mission assurance requirements for the highest-reliability bus electronics. With 19,712 CLBs the device integrates telemetry acquisition, command decoding, and housekeeping state machines that would otherwise require several rad-hard ASICs, and its segmentable clock tree supports independent timing domains for the processor interface and low-rate telemetry peripherals. Placed between an on-board computer and MIL-STD-1553 or SpaceWire interfaces, it delivers deterministic, single-chip operation; the trade-off is one-time programmability, so flight software-controlled flexibility must live outside the FPGA.
おすすめ
Radiation-Hardened Reconfigurable Computing Modules
For onboard science data reduction, the RTAX2000D-CQ352B provides 2,000,000 gates of antifuse logic whose interconnect is immune to configuration single-event upsets, a decisive property for compute modules that must run unattended for years. Carry logic accelerates fixed-point FFT, convolution, and error-correction chains, while chip-wide highway routing distributes wide data paths across the 29,568-cell fabric with predictable timing. The device is mounted on a heritage avionics board between an ADC front end and memory controllers, with the 1.5V core fed from a rad-tolerant point-of-load regulator; because the antifuse is programmed once, algorithm updates are handled at the system level via multiple programmed flight spares rather than in-orbit reconfiguration.
おすすめ
Star Tracker and Imager Interface Logic
Star trackers and scientific imagers require deterministic, low-noise timing and high-bandwidth readout channels, which the RTAX2000D-CQ352B supplies with its segmentable clocks and 2,000,000-gate capacity for CCD/CMOS sequencer, correlated double sampling support, and centroid computation logic. The antifuse architecture introduces no configuration-cell switching noise, helpful for the sensitive analog front ends adjacent to the digital core, and the CQFP-352 ceramic package supports the thermal and outgassing requirements of optical payloads. The FPGA typically clocks the sensor, sequences exposure, and pre-processes star centroids before handing coordinates to the attitude computer; designers should partition timing-critical centroid paths early since the one-time-programmable fabric does not permit later timing closure iterations on flight hardware.
おすすめ
Launcher and Avionics Interface Bridging
Launch-vehicle avionics frequently mix legacy bus standards with modern processors, and the RTAX2000D-CQ352B bridges them with 19,712 CLBs of glue logic, embedded SRAM FIFOs for rate decoupling, and I/O banks configurable to the required interface voltages. Its D-suffix screening and B burn-in align with launcher mission assurance flow, and the live-at-power-up antifuse configuration means interface logic is functional the instant units are energized during Range safety checks, with no configuration load time. The device typically sits between a flight computer and 1553, ARINC, or discretes interfaces; because antifuse devices cannot be reprogrammed after screening, teams maintain programmed flight spares and verify netlist parity through Microchip Libero SoC release control.
おすすめ
Prototype-to-Flight Migration Flow
The RTAX2000D-CQ352B is designed for a low-risk prototype-to-flight methodology: because the RTAX architecture derives from the commercial Axcelerator family, engineers validate RTL on reprogrammable Axcelerator devices using a footprint-compatible adaptor board plus an EDIF netlist and pinout converter, exactly as described in the RTAX-S/SL datasheet and the application note Prototyping for RTAX-S and RTAX-SL Devices. Only after timing closure and functional sign-off is the one-time-programmable antifuse flight device programmed, eliminating expensive burn errors. This page lists drop-in CQFP-352 family members (RTAX2000D E/V grades, DL low-power variants, and RTAX4000D density upgrades) so the final die choice can be deferred until after prototype results, keeping a single PCB layout across all options.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: RTAX2000D-CQ352B — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | RTAX2000D-CQ352E | RTAX2000DL-CQ352B | RTAX4000D-CQ352B |
|---|---|---|---|---|
| Package | CQFP-352 | CQFP-352 - same | CQFP-352 - same | CQFP-352 - same |
| Brand | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) | Microsemi (Microchip) |
| Equivalent System Gates | 2,000,000 | 2,000,000 | 2,000,000 | 4,000,000 |
| Core Voltage | 1.5 V nominal | 1.5 V nominal | 1.5 V nominal | 1.5 V nominal |
| Screening / Suffix | D, B burn-in | D, E grade | DL, B burn-in | D, B burn-in |
| Configuration | Antifuse OTP, live at power-up | Antifuse OTP, live at power-up | Antifuse OTP, live at power-up | Antifuse OTP, live at power-up |
| Relative Static Power | Standard D die | Same as this product | Lower (L low-power variant) | Higher (larger die) |
主な差別化要因
- Highest-reliability screening in the 2M-gate family （vs RTAX2000D-CQ352E)
- Lower static power than the density upgrade （vs RTAX4000D-CQ352B)
- Full-speed die versus speed grade 1 （vs RTAX2000D-1CQ352V)
設計ノート
The RTAX2000D-CQ352B is one-time programmable: once antifuses are burned, the configuration can never be changed. Complete full timing closure and functional verification in Libero SoC, and validate on a commercial Axcelerator prototype using the footprint-compatible adaptor board and EDIF netlist/pinout converter flow per the manufacturer datasheet, before programming any flight device. Maintain configuration-file version control and programmed flight spares for every mission lot.
Design the 1.5V core rail to hold 1.425V to 1.575V under all load and radiation-related degradation conditions. The D-suffix die is screened to tighter ICCA limits at 125C, which improves standby-current predictability, but transient core current during carry-chain switching still requires adequate decoupling on all VCC pins of the CQFP-352. Verify I/O bank voltages against the datasheet bank tables; mixed-voltage banks must be assigned before pin lock since antifuse programming fixes them permanently.
The CQFP-352 ceramic package has leads on all four sides; use a land pattern per the mechanical drawing in the family datasheet and support the leads with solder columns where thermal cycling life is a concern, as recommended for RTAX ceramic packages. Provide a solid ground plane under the device, place 0.1uF decoupling at each supply pin group, and keep high-speed LVDS or SpaceWire pairs length-matched from the CQFP through the board connector to preserve signal integrity.
コンプライアンス情報
Aerospace ceramic CQFP package; environmental compliance data not stated in provided web data. Consult Microchip product page for RoHS/REACH declarations.
