Skyworks Solutions

SI3216-C-GM - Single-Channel SLIC Codec, 3.3V/5V | Skyworks Solutions

部品番号: SI3216-C-GM ✓ 生産中
3.13 V to 5.25 V Vdss 88 mA Id 38-pin QFN (5 mm x 7 mm) Package
MOQ: 1 |

SI3216-C-GM 概要

Skyworks Solutions SI3216-C-GM is a single-channel Subscriber Line Interface Concept and codec integrated circuit designed for telecom line-card applications. The device operates from a 3.13 V to 5.25 V supply, accepts GCI, PCM, or SPI interfaces, and is specified for a -40°C to +85°C operating-temperature range. It is packaged in a 38-pin QFN measuring approximately 5 mm by 7 mm. The device also integrates a 60 dB SLIC signal path and a DC-DC converter for high-speed telecom interface applications.

A Subscriber Line Interface Concept, or SLIC, is the analog front end used to connect a central-office telephone line to a digital switching system. A traditional SLIC provides line termination, voice-band filtering, transmit and receive amplification, and line-power control. The SI3216-C-GM combines these functions with digital codec and control interfaces, allowing a telecom access circuit to use a compact single-chip signal path. Its GCI, PCM, and SPI interface options place it within the broader hierarchy of telecom interface ICs, interface ICs, and semiconductors.

Key specifications include one SLIC channel, a supply-voltage range of 3.13 V to 5.25 V, 88 mA supply current, and a listed power dissipation of 700 mW. The device supports narrowband operation to 3.4 kHz and dual-mode wideband operation to 7 kHz with 16-bit, 16 kHz sampling, as described in the product listing. Its 60 dB signal parameter makes it suitable for voice and wideband line-card designs where channel count, supply flexibility, and integrated telephony functions are important.

The SI3216-C-GM uses an integrated BJT/inductor DC-DC converter architecture to support telecom line-power and interface requirements. The converter and SLIC functions are consolidated into the same 38-QFN package, reducing the number of discrete components required around a line interface. The exposed-pad package provides a thermal path to the PCB, making copper pour and layout symmetry important for predictable junction-temperature behavior.

Typical applications include Voice over IP line cards, broadband access terminals, digital subscriber line equipment, PSTN line interfaces, embedded voice gateways, and industrial telecom control systems. In a Voice over IP design, the SLIC can handle the analog telephone-line side while PCM or SPI connects to a digital processor. For legacy telephone equipment, the same device can support narrowband voice or dual-mode wideband operation, subject to the system clocking and line-network requirements.

Designers should follow the manufacturer’s recommended decoupling, exposed-pad, and high-speed trace-layout practices. Place input and output capacitors close to their associated pins, connect the exposed thermal pad to a properly sized ground plane, and keep analog line interfaces away from switching and digital return currents. Confirm the intended supply rail, line-power limits, protection network, and interface timing before releasing the PCB layout.

This page combines the manufacturer-oriented part identity with distributor listings, interface and supply specifications, package information, drop-in family alternatives, and practical PCB and thermal considerations. It is intended to accelerate engineering selection while keeping the distinction between verified specifications and application-specific design assumptions explicit.

ドロップイン代替品: SI3216-C-GM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: SI3216-C-GM (同一形状・フットプリント) — 相違点: Lead-Free Status, Package, Product Type.

Silicon Labs
Lead-Free Status: Lead free
Package: 38-pin TSSOP
Product Type: ProSLIC Subscriber Line Interface Concept and audio codec
比較対象 SI3216-C-GM →

SI3216-C-FM

✅ ドロップイン
Skyworks Solutions
📦 38-QFN (5x7)
Subscriber Line Interface Concept (SLIC) and CODEC IC · 1 channel · GCI, PCM, and SPI · 3.13 V to 5.25 V · 88 mA · 700 mW · 0 °C to 70 °C · Up to 7 kHz

価格はお問い合わせください

データシートを見る →

SI3216M-C-GM

✅ ドロップイン
📦 38-QFN (5x7)
Same SI3216-family package and SLIC function; the listing describes a compact single-channel amplifier module, with no quantified difference from the target available.

📋 参考代替品(カタログ未掲載)

SI3216-B-GM

✅ ドロップイン
📦 38-QFN (5x7)
Same 38-VFQGN, 1-channel, 3.3 V/5 V, 60 dB SLIC class and package dimensions; ordering-code electrical differences are not quantified in the cross-reference listing.

📋 参考代替品(カタログ未掲載)

SI3216-C-FT

✅ ドロップイン
Skyworks Solutions
📦 38-QFN (5x7)
Single-channel wideband SLIC/codec · 1 channel · GCI, PCM, and SPI · 3.13 V to 5.25 V · 88 mA · 700 mW · Up to 7 kHz · Up to 3.4 kHz

価格はお問い合わせください

データシートを見る →

SI3216-KT

✅ ドロップイン
Silicon Labs
📦 38-QFN (5x7)
ProSLIC Subscriber Line Interface Concept and audio codec · 1 · 3.13 V to 5.25 V · 3.3 V or 5 V · 88 mA · 700 mW · 50 Hz to 7.0 kHz · 200 Hz to 3.4 kHz

価格はお問い合わせください

データシートを見る →

SI3216-C-GM 仕様

Product Type Single-channel Subscriber Line Interface Concept (SLIC) and codec
Number of Circuits 1 channel
Supply Voltage Range 3.13 V to 5.25 V
電源電流 88 mA
Power Dissipation 700 mW
インターフェース GCI, PCM, and SPI
SLIC Signal Parameter 60 dB
Narrowband Voice Band Up to 3.4 kHz
Wideband Voice Band Dual-mode operation up to 7 kHz
Sampling Resolution 16 bit
サンプリングレート 16 kHz
動作温度 -40°C to +85°C
パッケージ 38-pin QFN (5 mm x 7 mm)
Package Type 38-VFQFN with exposed pad
実装タイプ Surface mount
Lead-Free Status Lead-free design
RoHS ステータス Compliant
Manufacturer Skyworks Solutions Inc.

SI3216-C-GM 38-vfqfn with exposed pad ピン配置ガイド

SI3216-C-GM (38-vfqfn with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SI3216-C-GM の 38-vfqfn with exposed pad パッケージピン配置図

詳細なピン配置データはありません: SI3216-C-GM.

詳細は データシート をご参照ください。

主な用途

SI3216-C-GM の用途: 6 件s: Voice over IP Line Cards, Digital Subscriber Line Access Equipment, Embedded Voice Gateways, PSTN Line Interface Cards, Industrial Telecom Control Systems, Wideband Voice Access Terminals.

🌐

Voice over IP Line Cards

The SI3216-C-GM fits Voice over IP line cards that connect analog telephone lines to a digital voice processor. Its GCI, PCM, and SPI interfaces allow the line-facing SLIC to operate beside a communications processor without implementing separate analog termination and codec blocks. The 3.13 V to 5.25 V supply range supports 3.3 V and 5 V system architectures, while narrowband operation to 3.4 kHz addresses standard voice. The 60 dB SLIC specification and 38-VFQGN exposed-pad package provide a compact implementation, but the final design must include the required line protection, ringing interface, and clocking arrangement.

🏭

Digital Subscriber Line Access Equipment

The SI3216-C-GM can be used in digital subscriber line access equipment requiring a controlled analog line interface alongside digital control logic. Its single SLIC channel and 16-bit, 16 kHz codec operation support narrowband and dual-mode wideband voice paths, while the listed 88 mA supply current helps constrain system power demand. The 38-QFN package allows compact placement in access-terminal boards. Designers should account for the 700 mW listed power dissipation, provide a robust exposed-pad thermal path, and separate line-side return currents from sensitive digital and processor supply paths.

📱

Embedded Voice Gateways

The SI3216-C-GM suits embedded voice gateways that connect legacy analog endpoints to packet-based or processor-controlled networks. Its multiple digital interfaces support different system partitioning approaches, while the single-channel architecture can be replicated across several lines. The 3.3 V and 5 V compatibility gives designers flexibility in industrial and communications equipment, and the 38-VFQGN footprint supports compact module designs. Integration still depends on correct line-power states, ring detection, codec clocking, and the manufacturer-recommended high-voltage protection network around the telephone-line interface.

☎️

PSTN Line Interface Cards

The SI3216-C-GM is appropriate for Public Switched Telephone Network line-interface cards where a conventional analog line must be interfaced to digital switching logic. The device provides narrowband voice support to 3.4 kHz and dual-mode wideband capability to 7 kHz, allowing one family to serve legacy and enhanced voice designs. Its GCI, PCM, and SPI connectivity supports processor, transport, and control integrations. The principal engineering considerations are protecting the line interface from surges, managing line-power dissipation, grounding the exposed pad effectively, and observing the -40°C to +85°C operating range.

🏭

Industrial Telecom Control Systems

The SI3216-C-GM can be used in industrial telecom control systems that provide analog line connectivity alongside deterministic control electronics. Its 3.13 V to 5.25 V operating range accommodates both common low-voltage supply architectures, while the 88 mA specified current supports predictable power budgeting. The wideband and narrowband codec modes provide flexibility across legacy and modern voice endpoints. For factory or industrial installations, apply the specified -40°C to +85°C range to enclosure temperature calculations and isolate surge-prone line connections from control circuitry. Layout should maintain short supply paths and a continuous ground reference under the exposed pad.

📡

Wideband Voice Access Terminals

The SI3216-C-GM supports wideband voice access terminals through its dual-mode operation up to 7 kHz and 16-bit, 16 kHz sampling. Designers can use the same SLIC architecture for narrowband or wideband channels, subject to network bandwidth, clocking, and codec configuration. Its 60 dB signal specification and compact 38-QFN package are valuable where multiple line channels must fit into a limited terminal footprint. The 700 mW listed power dissipation makes exposed-pad thermal management especially important, while the line-side protection network must be designed independently to withstand the voltages and transients encountered on external telephone lines.

What is the operating voltage of SI3216-C-GM?
The SI3216-C-GM operates from 3.13 V to 5.25 V. According to the SI3216-C-GM product specifications, this range supports both 3.3 V and 5 V system rails. The selected supply must remain within the stated limits while providing adequate transient margin for line-side power transients. Decoupling and exposed-pad grounding should follow the manufacturer layout recommendations.
What does SI3216-C-GM do?
The SI3216-C-GM is a single-channel SLIC and codec for telephone-line interface designs. It combines GCI, PCM, and SPI interfaces with narrowband voice support to 3.4 kHz and dual-mode wideband support to 7 kHz. The device uses 16-bit, 16 kHz sampling and is specified with an 88 mA supply current and 700 mW power rating.
Where can I download the SI3216-C-GM datasheet PDF?
The SI3216-C-GM datasheet is available through the linked specification and distributor pages on this product page. Use the manufacturer datasheet for the authoritative pin description, timing tables, recommended application circuit, exposed-pad layout, and decoupling values. The package is a 38-pin VFQFN, so the pin assignment and thermal-pad connection must be checked directly against the datasheet before PCB routing.
Where can I find the SI3216-C-GM pinout?
The SI3216-C-GM uses a 38-pin VFQFN package with an exposed pad, and its complete pin assignment is shown in the linked manufacturer and distributor documentation. Use the pin-description table when assigning GCI, PCM, SPI, supply, ground, and line-interface signals. The exposed pad must be connected according to the datasheet land pattern rather than treated as an unassigned pin.
What is the package of SI3216-C-GM?
The SI3216-C-GM is supplied in a 38-pin QFN package measuring approximately 5 mm by 7 mm, with an exposed thermal pad. Distributor listings identify the package as 38-QFN or 38-VFQFN and the device as surface mount. Because a dedicated 38-pin QFN drawing is not included in the package-diagram library, use the manufacturer land pattern and pin table for board design.
What is the SI3216-C-GM supply current and power dissipation?
The SI3216-C-GM is listed at 88 mA supply current and 700 mW power dissipation. The listed power value is a device specification rather than a board-specific calculation. Actual thermal design depends on supply voltage, line activity, copper area, ambient temperature, and the thermal contribution of the exposed pad.
SI3216-C-GM vs SI3216-C-FM - which is better?
Both SI3216-C-GM and SI3216-C-FM are listed as 38-QFN, 5 mm by 7 mm, single-channel SLIC and codec devices. The available family comparison identifies them as members of the same SI3216 series, but it does not establish that every electrical function is identical. Choose the exact orderable variant whose temperature grade, package marking, and application requirements match the original design.
Can SI3216-C-FM replace SI3216-C-GM?
The SI3216-C-FM is a strong same-footprint candidate because distributor listings identify both parts as 38-QFN, 5 mm by 7 mm single-channel SLIC and codec devices. Final drop-in qualification should verify revision-specific pin functions, line-power behavior, electrical limits, and temperature requirements against the manufacturer datasheets. The listed package match alone does not prove every ordering code is interchangeable.
When should I choose SI3216-C-GM over another SI3216 variant?
Choose SI3216-C-GM when the design specifically requires that orderable configuration and its 38-VFQFN footprint. Its 3.13 V to 5.25 V supply range, GCI, PCM, and SPI interfaces, and single-channel SLIC architecture suit telecom line cards and voice-access products. Select a different family member only after confirming that its digital interface, line-power characteristics, and production status satisfy the complete system specification.
Is SI3216-C-GM suitable for Voice over IP equipment?
Yes, the SI3216-C-GM is suitable for Voice over IP equipment that requires a telephone-line-facing SLIC and a digital processor interface. Its GCI, PCM, and SPI options provide multiple system integration paths, while narrowband and dual-mode wideband voice support cover both traditional and wideband call formats. Line protection, ringing, line-power, and codec-clock implementation still require application-level review.
Where can I buy SI3216-C-GM online?
The SI3216-C-GM can be requested through the Request a Quote form on this page. The form accepts quantity, target package, delivery location, and production-schedule requirements, allowing the supply channel to confirm current availability and lead time for the exact MPN. Use the part-number field exactly as SI3216-C-GM when submitting the request.
What is the price of SI3216-C-GM?
Current unit pricing and volume breaks for SI3216-C-GM should be obtained through the Request a Quote form on this page. The form is the appropriate route for checking the exact order code, package, quantity, and delivery terms because telecom-interface pricing can vary with volume and schedule. Submit SI3216-C-GM and the required production quantity for a current quotation.
What is the lead time and stock status for SI3216-C-GM?
The current stock position and production lead time for SI3216-C-GM should be confirmed through the Request a Quote form on this page. Provide the required quantity, annual usage, target date, and shipment destination so the supply channel can verify allocation and scheduling. This avoids relying on an unconfirmed listing status that may not reflect the requested quantity.
What can replace SI3216-C-GM?
SI3216-C-FM, SI3216M-C-GM, SI3216-B-GM, SI3216-C-FT, and SI3216-KT are same-family candidates associated with the SI3216-C-GM cross-reference data. All are presented as potential 38-pin QFN alternatives, but the available listing data does not prove that every revision is fully pin-to-pin and functionally identical. Verify the manufacturer datasheet, temperature grade, line-power architecture, and digital interface before substitution.
What are the key specifications of SI3216-C-GM that engineers should know?
The key SI3216-C-GM specifications are one SLIC channel, a 3.13 V to 5.25 V supply range, GCI/PCM/SPI interfaces, 88 mA supply current, 700 mW listed power dissipation, and a -40°C to +85°C operating range. It supports narrowband voice to 3.4 kHz and dual-mode wideband voice to 7 kHz with 16-bit, 16 kHz sampling in a 38-VFQGN package with an exposed pad.

エンジニアリング参考データ: SI3216-C-GM — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose SI3216-C-GM when the product requires a single-channel 38-VFQGN SLIC and codec with a 3.13 V to 5.25 V supply, 60 dB signal parameter, and GCI, PCM, or SPI connectivity. SI3216-C-FM is the closest listed same-family candidate when its exact revision and electrical details match the design. SI3216-B-GM is useful when its ordering code and digital interface satisfy the system, while its listed package and 60 dB SLIC characteristics align with the target package class. SI3216M-C-GM and SI3216-C-FT are also same-family candidates, but their available descriptions identify amplifier-module variants and require closer functional review. SI3216-KT may fit when its exact pinout and interface behavior are confirmed. Because the cross-reference data does not expose complete pin tables for every alternative, final substitution should be based on manufacturer datasheets rather than package outline alone.

代替品との比較

パラメータ この製品 SI3216-C-FM SI3216M-C-GM SI3216-B-GM SI3216-C-FT SI3216-KT
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions
Product Type Single-channel SLIC and codec Single-channel SLIC and codec Compact single-channel amplifier module Single-channel SLIC Single-channel amplifier module Telecom interface IC
Minimum Supply Voltage 3.13 V 3.13 V 3.13 V 3.13 V 3.13 V 3.13 V
Maximum Supply Voltage 5.25 V 5.25 V 5.25 V 5.25 V 5.25 V 5.25 V

主な差別化要因

  • Supports three digital integration interfaces in one SLIC codec (vs SI3216-B-GM)
  • Supports narrowband and dual-mode wideband voice (vs SI3216-C-FM)
  • Offers a broad compatible low-voltage supply range (vs SI3216-KT)
  • Identified as a lead-free 60 dB single-channel SLIC (vs SI3216M-C-GM)

設計ノート

Use the manufacturer’s 38-VFQGN land pattern and exposed-pad geometry rather than a generic QFN footprint. Place the decoupling network close to the supply pins, keep the line-side and digital interfaces in their recommended circuit zones, and provide a low-impedance ground reference beneath the exposed pad. The exposed pad is part of the thermal and electrical design, not an optional center pad.

Estimated: the listed 700 mW dissipation corresponds to a 7 °C junction rise for each 1 °C rise above ambient if the effective thermal resistance were 10 °C/W. Actual rise depends on PCB copper, airflow, package construction, and adjacent heat sources, so use the manufacturer thermal data for final verification. Avoid placing the exposed pad over a large uninterrupted copper region unless the layout guidance explicitly permits it.

Treat GCI, PCM, and SPI traces as clocked digital interfaces and follow the manufacturer’s length, impedance, grounding, and isolation guidance. Keep switching-node and line-power return currents away from codec clock and data paths. Where the PCB crosses between line-side and system-side circuitry, use a continuous reference plane and minimize unprotected loop area to reduce coupled noise.

Do not assume that a shared 38-QFN outline guarantees that every SI3216 ordering code is a production drop-in. Confirm pin functions, revision, temperature grade, line-power limits, interface timing, and exposed-pad requirements for the exact replacement. Also confirm the 3.13 V to 5.25 V operating range and the system’s required narrowband or dual-mode wideband codec configuration.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

RoHS compliance is stated in the SI3216-C-FT family comparison, and the target family listing identifies the SI3216-C-GM design as lead-free. REACH, halogen-free, and conflict-minerals status are not stated.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SI3216-C-GM datasheet SI3216-C-GM pinout SI3216-C-GM datasheet pdf SI3216-C-GM equivalent SI3216-C-GM replacement SI3216-C-GM cross reference SI3216-C-GM vs SI3216-C-FM SI3216-C-GM footprint Skyworks SI3216-C-GM SI3216-C-GM price SI3216-C-GM stock 38-QFN SLIC codec single channel telecom SLIC

関連部品&用語

Skyworks Solutions SI3216-C-GM SI3216-C-FM SI3216M-C-GM SI3216-B-GM SI3216-C-FT SI3216-KT Subscriber Line Interface Concept SLIC telecom interface IC interface IC codec GCI PCM SPI narrowband voice wideband voice BJT/inductor DC-DC converter 38-VFQGN QFN package surface mount exposed pad RoHS lead-free line power
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示