SI3216-C-GM - Single-Channel SLIC Codec, 3.3V/5V | Skyworks Solutions
MPN: SI3216-C-GM ✓ ActiveSI3216-C-GM Overview
A Subscriber Line Interface Concept, or SLIC, is the analog front end used to connect a central-office telephone line to a digital switching system. A traditional SLIC provides line termination, voice-band filtering, transmit and receive amplification, and line-power control. The SI3216-C-GM combines these functions with digital codec and control interfaces, allowing a telecom access circuit to use a compact single-chip signal path. Its GCI, PCM, and SPI interface options place it within the broader hierarchy of telecom interface ICs, interface ICs, and semiconductors.
Key specifications include one SLIC channel, a supply-voltage range of 3.13 V to 5.25 V, 88 mA supply current, and a listed power dissipation of 700 mW. The device supports narrowband operation to 3.4 kHz and dual-mode wideband operation to 7 kHz with 16-bit, 16 kHz sampling, as described in the product listing. Its 60 dB signal parameter makes it suitable for voice and wideband line-card designs where channel count, supply flexibility, and integrated telephony functions are important.
The SI3216-C-GM uses an integrated BJT/inductor DC-DC converter architecture to support telecom line-power and interface requirements. The converter and SLIC functions are consolidated into the same 38-QFN package, reducing the number of discrete components required around a line interface. The exposed-pad package provides a thermal path to the PCB, making copper pour and layout symmetry important for predictable junction-temperature behavior.
Typical applications include Voice over IP line cards, broadband access terminals, digital subscriber line equipment, PSTN line interfaces, embedded voice gateways, and industrial telecom control systems. In a Voice over IP design, the SLIC can handle the analog telephone-line side while PCM or SPI connects to a digital processor. For legacy telephone equipment, the same device can support narrowband voice or dual-mode wideband operation, subject to the system clocking and line-network requirements.
Designers should follow the manufacturer’s recommended decoupling, exposed-pad, and high-speed trace-layout practices. Place input and output capacitors close to their associated pins, connect the exposed thermal pad to a properly sized ground plane, and keep analog line interfaces away from switching and digital return currents. Confirm the intended supply rail, line-power limits, protection network, and interface timing before releasing the PCB layout.
This page combines the manufacturer-oriented part identity with distributor listings, interface and supply specifications, package information, drop-in family alternatives, and practical PCB and thermal considerations. It is intended to accelerate engineering selection while keeping the distinction between verified specifications and application-specific design assumptions explicit.
Drop-in alternatives for SI3216-C-GM — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SI3216-C-GM (same form factor and footprint) — differing in Lead-Free Status, Package, Product Type.
SI3216-C-FM
✅ Drop-InContact for price
View Datasheet →SI3216M-C-GM
✅ Drop-In📋 Reference alternative (not in catalog)
SI3216-B-GM
✅ Drop-In📋 Reference alternative (not in catalog)
SI3216-C-FT
✅ Drop-InContact for price
View Datasheet →SI3216-KT
✅ Drop-InContact for price
View Datasheet →SI3216-C-GM Specifications
| Product Type | Single-channel Subscriber Line Interface Concept (SLIC) and codec |
| Number of Circuits | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| Supply Current | 88 mA |
| Power Dissipation | 700 mW |
| Interface | GCI, PCM, and SPI |
| SLIC Signal Parameter | 60 dB |
| Narrowband Voice Band | Up to 3.4 kHz |
| Wideband Voice Band | Dual-mode operation up to 7 kHz |
| Sampling Resolution | 16 bit |
| Sampling Rate | 16 kHz |
| Operating Temperature | -40°C to +85°C |
| Package | 38-pin QFN (5 mm x 7 mm) |
| Package Type | 38-VFQFN with exposed pad |
| Mounting Type | Surface mount |
| Lead-Free Status | Lead-free design |
| RoHS Status | Compliant |
| Manufacturer | Skyworks Solutions Inc. |
SI3216-C-GM 38-vfqfn with exposed pad Pin Configuration Guide
Pin configuration for SI3216-C-GM (38-vfqfn with exposed pad package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.
No detailed pinout data available for SI3216-C-GM.
Refer to the datasheet for full pin configuration.
Typical Applications
SI3216-C-GM is suitable for 6 applications: Voice over IP Line Cards, Digital Subscriber Line Access Equipment, Embedded Voice Gateways, PSTN Line Interface Cards, Industrial Telecom Control Systems, Wideband Voice Access Terminals.
Voice over IP Line Cards
The SI3216-C-GM fits Voice over IP line cards that connect analog telephone lines to a digital voice processor. Its GCI, PCM, and SPI interfaces allow the line-facing SLIC to operate beside a communications processor without implementing separate analog termination and codec blocks. The 3.13 V to 5.25 V supply range supports 3.3 V and 5 V system architectures, while narrowband operation to 3.4 kHz addresses standard voice. The 60 dB SLIC specification and 38-VFQGN exposed-pad package provide a compact implementation, but the final design must include the required line protection, ringing interface, and clocking arrangement.
Recommended
Digital Subscriber Line Access Equipment
The SI3216-C-GM can be used in digital subscriber line access equipment requiring a controlled analog line interface alongside digital control logic. Its single SLIC channel and 16-bit, 16 kHz codec operation support narrowband and dual-mode wideband voice paths, while the listed 88 mA supply current helps constrain system power demand. The 38-QFN package allows compact placement in access-terminal boards. Designers should account for the 700 mW listed power dissipation, provide a robust exposed-pad thermal path, and separate line-side return currents from sensitive digital and processor supply paths.
Recommended
Embedded Voice Gateways
The SI3216-C-GM suits embedded voice gateways that connect legacy analog endpoints to packet-based or processor-controlled networks. Its multiple digital interfaces support different system partitioning approaches, while the single-channel architecture can be replicated across several lines. The 3.3 V and 5 V compatibility gives designers flexibility in industrial and communications equipment, and the 38-VFQGN footprint supports compact module designs. Integration still depends on correct line-power states, ring detection, codec clocking, and the manufacturer-recommended high-voltage protection network around the telephone-line interface.
Recommended
PSTN Line Interface Cards
The SI3216-C-GM is appropriate for Public Switched Telephone Network line-interface cards where a conventional analog line must be interfaced to digital switching logic. The device provides narrowband voice support to 3.4 kHz and dual-mode wideband capability to 7 kHz, allowing one family to serve legacy and enhanced voice designs. Its GCI, PCM, and SPI connectivity supports processor, transport, and control integrations. The principal engineering considerations are protecting the line interface from surges, managing line-power dissipation, grounding the exposed pad effectively, and observing the -40°C to +85°C operating range.
Recommended
Industrial Telecom Control Systems
The SI3216-C-GM can be used in industrial telecom control systems that provide analog line connectivity alongside deterministic control electronics. Its 3.13 V to 5.25 V operating range accommodates both common low-voltage supply architectures, while the 88 mA specified current supports predictable power budgeting. The wideband and narrowband codec modes provide flexibility across legacy and modern voice endpoints. For factory or industrial installations, apply the specified -40°C to +85°C range to enclosure temperature calculations and isolate surge-prone line connections from control circuitry. Layout should maintain short supply paths and a continuous ground reference under the exposed pad.
Recommended
Wideband Voice Access Terminals
The SI3216-C-GM supports wideband voice access terminals through its dual-mode operation up to 7 kHz and 16-bit, 16 kHz sampling. Designers can use the same SLIC architecture for narrowband or wideband channels, subject to network bandwidth, clocking, and codec configuration. Its 60 dB signal specification and compact 38-QFN package are valuable where multiple line channels must fit into a limited terminal footprint. The 700 mW listed power dissipation makes exposed-pad thermal management especially important, while the line-side protection network must be designed independently to withstand the voltages and transients encountered on external telephone lines.
Recommended
Recommended Products Summary
Engineering reference data for SI3216-C-GM — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SI3216-C-FM | SI3216M-C-GM | SI3216-B-GM | SI3216-C-FT | SI3216-KT |
|---|---|---|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Product Type | Single-channel SLIC and codec | Single-channel SLIC and codec | Compact single-channel amplifier module | Single-channel SLIC | Single-channel amplifier module | Telecom interface IC |
| Minimum Supply Voltage | 3.13 V | 3.13 V | 3.13 V | 3.13 V | 3.13 V | 3.13 V |
| Maximum Supply Voltage | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V |
Key Differentiators
- Supports three digital integration interfaces in one SLIC codec (vs SI3216-B-GM)
- Supports narrowband and dual-mode wideband voice (vs SI3216-C-FM)
- Offers a broad compatible low-voltage supply range (vs SI3216-KT)
- Identified as a lead-free 60 dB single-channel SLIC (vs SI3216M-C-GM)
Design Notes
Use the manufacturer’s 38-VFQGN land pattern and exposed-pad geometry rather than a generic QFN footprint. Place the decoupling network close to the supply pins, keep the line-side and digital interfaces in their recommended circuit zones, and provide a low-impedance ground reference beneath the exposed pad. The exposed pad is part of the thermal and electrical design, not an optional center pad.
Estimated: the listed 700 mW dissipation corresponds to a 7 °C junction rise for each 1 °C rise above ambient if the effective thermal resistance were 10 °C/W. Actual rise depends on PCB copper, airflow, package construction, and adjacent heat sources, so use the manufacturer thermal data for final verification. Avoid placing the exposed pad over a large uninterrupted copper region unless the layout guidance explicitly permits it.
Treat GCI, PCM, and SPI traces as clocked digital interfaces and follow the manufacturer’s length, impedance, grounding, and isolation guidance. Keep switching-node and line-power return currents away from codec clock and data paths. Where the PCB crosses between line-side and system-side circuitry, use a continuous reference plane and minimize unprotected loop area to reduce coupled noise.
Do not assume that a shared 38-QFN outline guarantees that every SI3216 ordering code is a production drop-in. Confirm pin functions, revision, temperature grade, line-power limits, interface timing, and exposed-pad requirements for the exact replacement. Also confirm the 3.13 V to 5.25 V operating range and the system’s required narrowband or dual-mode wideband codec configuration.
Compliance Information
RoHS compliance is stated in the SI3216-C-FT family comparison, and the target family listing identifies the SI3216-C-GM design as lead-free. REACH, halogen-free, and conflict-minerals status are not stated.