SI3216-C-GM - Single-Channel SLIC Codec, 3.3V/5V | Skyworks Solutions
MPN: SI3216-C-GM ✓ 啟用中SI3216-C-GM 概覽
A Subscriber Line Interface Concept, or SLIC, is the analog front end used to connect a central-office telephone line to a digital switching system. A traditional SLIC provides line termination, voice-band filtering, transmit and receive amplification, and line-power control. The SI3216-C-GM combines these functions with digital codec and control interfaces, allowing a telecom access circuit to use a compact single-chip signal path. Its GCI, PCM, and SPI interface options place it within the broader hierarchy of telecom interface ICs, interface ICs, and semiconductors.
Key specifications include one SLIC channel, a supply-voltage range of 3.13 V to 5.25 V, 88 mA supply current, and a listed power dissipation of 700 mW. The device supports narrowband operation to 3.4 kHz and dual-mode wideband operation to 7 kHz with 16-bit, 16 kHz sampling, as described in the product listing. Its 60 dB signal parameter makes it suitable for voice and wideband line-card designs where channel count, supply flexibility, and integrated telephony functions are important.
The SI3216-C-GM uses an integrated BJT/inductor DC-DC converter architecture to support telecom line-power and interface requirements. The converter and SLIC functions are consolidated into the same 38-QFN package, reducing the number of discrete components required around a line interface. The exposed-pad package provides a thermal path to the PCB, making copper pour and layout symmetry important for predictable junction-temperature behavior.
Typical applications include Voice over IP line cards, broadband access terminals, digital subscriber line equipment, PSTN line interfaces, embedded voice gateways, and industrial telecom control systems. In a Voice over IP design, the SLIC can handle the analog telephone-line side while PCM or SPI connects to a digital processor. For legacy telephone equipment, the same device can support narrowband voice or dual-mode wideband operation, subject to the system clocking and line-network requirements.
Designers should follow the manufacturer’s recommended decoupling, exposed-pad, and high-speed trace-layout practices. Place input and output capacitors close to their associated pins, connect the exposed thermal pad to a properly sized ground plane, and keep analog line interfaces away from switching and digital return currents. Confirm the intended supply rail, line-power limits, protection network, and interface timing before releasing the PCB layout.
This page combines the manufacturer-oriented part identity with distributor listings, interface and supply specifications, package information, drop-in family alternatives, and practical PCB and thermal considerations. It is intended to accelerate engineering selection while keeping the distinction between verified specifications and application-specific design assumptions explicit.
直接替換替代品,適用於 SI3216-C-GM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: SI3216-C-GM (相同外形與佔位) — 差異在於 Lead-Free Status, Package, Product Type.
SI3216-C-FM
✅ 直接替換聯絡詢價
查看資料表 →SI3216M-C-GM
✅ 直接替換📋 參考替代品(不在目錄中)
SI3216-B-GM
✅ 直接替換📋 參考替代品(不在目錄中)
SI3216-C-FT
✅ 直接替換聯絡詢價
查看資料表 →SI3216-C-GM 規格
| Product Type | Single-channel Subscriber Line Interface Concept (SLIC) and codec |
| Number of Circuits | 1 channel |
| Supply Voltage Range | 3.13 V to 5.25 V |
| 供應電流 | 88 mA |
| Power Dissipation | 700 mW |
| 介面 | GCI, PCM, and SPI |
| SLIC Signal Parameter | 60 dB |
| Narrowband Voice Band | Up to 3.4 kHz |
| Wideband Voice Band | Dual-mode operation up to 7 kHz |
| Sampling Resolution | 16 bit |
| 取樣率 | 16 kHz |
| 工作溫度 | -40°C to +85°C |
| 封裝 | 38-pin QFN (5 mm x 7 mm) |
| Package Type | 38-VFQFN with exposed pad |
| 安裝類型 | Surface mount |
| Lead-Free Status | Lead-free design |
| RoHS 狀態 | Compliant |
| Manufacturer | Skyworks Solutions Inc. |
SI3216-C-GM 38-vfqfn with exposed pad 腳位配置指南
SI3216-C-GM(38-vfqfn with exposed pad 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: SI3216-C-GM.
請參閱 資料表 以查看完整腳位配置。
典型應用
SI3216-C-GM 適用於 6 應用s: Voice over IP Line Cards, Digital Subscriber Line Access Equipment, Embedded Voice Gateways, PSTN Line Interface Cards, Industrial Telecom Control Systems, Wideband Voice Access Terminals.
Voice over IP Line Cards
The SI3216-C-GM fits Voice over IP line cards that connect analog telephone lines to a digital voice processor. Its GCI, PCM, and SPI interfaces allow the line-facing SLIC to operate beside a communications processor without implementing separate analog termination and codec blocks. The 3.13 V to 5.25 V supply range supports 3.3 V and 5 V system architectures, while narrowband operation to 3.4 kHz addresses standard voice. The 60 dB SLIC specification and 38-VFQGN exposed-pad package provide a compact implementation, but the final design must include the required line protection, ringing interface, and clocking arrangement.
推薦
Digital Subscriber Line Access Equipment
The SI3216-C-GM can be used in digital subscriber line access equipment requiring a controlled analog line interface alongside digital control logic. Its single SLIC channel and 16-bit, 16 kHz codec operation support narrowband and dual-mode wideband voice paths, while the listed 88 mA supply current helps constrain system power demand. The 38-QFN package allows compact placement in access-terminal boards. Designers should account for the 700 mW listed power dissipation, provide a robust exposed-pad thermal path, and separate line-side return currents from sensitive digital and processor supply paths.
推薦
Embedded Voice Gateways
The SI3216-C-GM suits embedded voice gateways that connect legacy analog endpoints to packet-based or processor-controlled networks. Its multiple digital interfaces support different system partitioning approaches, while the single-channel architecture can be replicated across several lines. The 3.3 V and 5 V compatibility gives designers flexibility in industrial and communications equipment, and the 38-VFQGN footprint supports compact module designs. Integration still depends on correct line-power states, ring detection, codec clocking, and the manufacturer-recommended high-voltage protection network around the telephone-line interface.
推薦
PSTN Line Interface Cards
The SI3216-C-GM is appropriate for Public Switched Telephone Network line-interface cards where a conventional analog line must be interfaced to digital switching logic. The device provides narrowband voice support to 3.4 kHz and dual-mode wideband capability to 7 kHz, allowing one family to serve legacy and enhanced voice designs. Its GCI, PCM, and SPI connectivity supports processor, transport, and control integrations. The principal engineering considerations are protecting the line interface from surges, managing line-power dissipation, grounding the exposed pad effectively, and observing the -40°C to +85°C operating range.
推薦
Industrial Telecom Control Systems
The SI3216-C-GM can be used in industrial telecom control systems that provide analog line connectivity alongside deterministic control electronics. Its 3.13 V to 5.25 V operating range accommodates both common low-voltage supply architectures, while the 88 mA specified current supports predictable power budgeting. The wideband and narrowband codec modes provide flexibility across legacy and modern voice endpoints. For factory or industrial installations, apply the specified -40°C to +85°C range to enclosure temperature calculations and isolate surge-prone line connections from control circuitry. Layout should maintain short supply paths and a continuous ground reference under the exposed pad.
推薦
Wideband Voice Access Terminals
The SI3216-C-GM supports wideband voice access terminals through its dual-mode operation up to 7 kHz and 16-bit, 16 kHz sampling. Designers can use the same SLIC architecture for narrowband or wideband channels, subject to network bandwidth, clocking, and codec configuration. Its 60 dB signal specification and compact 38-QFN package are valuable where multiple line channels must fit into a limited terminal footprint. The 700 mW listed power dissipation makes exposed-pad thermal management especially important, while the line-side protection network must be designed independently to withstand the voltages and transients encountered on external telephone lines.
推薦
推薦產品摘要
工程參考資料,適用於 SI3216-C-GM — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | SI3216-C-FM | SI3216M-C-GM | SI3216-B-GM | SI3216-C-FT | SI3216-KT |
|---|---|---|---|---|---|---|
| Brand | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions | Skyworks Solutions |
| Product Type | Single-channel SLIC and codec | Single-channel SLIC and codec | Compact single-channel amplifier module | Single-channel SLIC | Single-channel amplifier module | Telecom interface IC |
| Minimum Supply Voltage | 3.13 V | 3.13 V | 3.13 V | 3.13 V | 3.13 V | 3.13 V |
| Maximum Supply Voltage | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V | 5.25 V |
主要差異化特點
- Supports three digital integration interfaces in one SLIC codec (對比SI3216-B-GM)
- Supports narrowband and dual-mode wideband voice (對比SI3216-C-FM)
- Offers a broad compatible low-voltage supply range (對比SI3216-KT)
- Identified as a lead-free 60 dB single-channel SLIC (對比SI3216M-C-GM)
設計說明
Use the manufacturer’s 38-VFQGN land pattern and exposed-pad geometry rather than a generic QFN footprint. Place the decoupling network close to the supply pins, keep the line-side and digital interfaces in their recommended circuit zones, and provide a low-impedance ground reference beneath the exposed pad. The exposed pad is part of the thermal and electrical design, not an optional center pad.
Estimated: the listed 700 mW dissipation corresponds to a 7 °C junction rise for each 1 °C rise above ambient if the effective thermal resistance were 10 °C/W. Actual rise depends on PCB copper, airflow, package construction, and adjacent heat sources, so use the manufacturer thermal data for final verification. Avoid placing the exposed pad over a large uninterrupted copper region unless the layout guidance explicitly permits it.
Treat GCI, PCM, and SPI traces as clocked digital interfaces and follow the manufacturer’s length, impedance, grounding, and isolation guidance. Keep switching-node and line-power return currents away from codec clock and data paths. Where the PCB crosses between line-side and system-side circuitry, use a continuous reference plane and minimize unprotected loop area to reduce coupled noise.
Do not assume that a shared 38-QFN outline guarantees that every SI3216 ordering code is a production drop-in. Confirm pin functions, revision, temperature grade, line-power limits, interface timing, and exposed-pad requirements for the exact replacement. Also confirm the 3.13 V to 5.25 V operating range and the system’s required narrowband or dual-mode wideband codec configuration.
合規資訊
RoHS compliance is stated in the SI3216-C-FT family comparison, and the target family listing identifies the SI3216-C-GM design as lead-free. REACH, halogen-free, and conflict-minerals status are not stated.