STPM066S - 66V Step-Down DC-DC Converter | STMicroelectronics
部品番号: STPM066S ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $2.85 | $2.85 |
| 10 | $2.56 | $25.60 |
| 100 | $2.28 | $228.00 |
| 500 | $2.05 | $1,025.00 |
| 1,000 | $1.85 | $1,850.00 |
STPM066S 概要
A step-down DC-DC converter, also known as a buck converter, is a type of switching regulator that efficiently reduces a higher input voltage to a lower output voltage. Unlike linear regulators, which dissipate excess power as heat, buck converters use inductive energy storage and high-frequency switching to achieve efficiencies often exceeding 90%. This makes them essential in power management systems where thermal budget and battery life are critical. The STPM066S belongs to the broader category of power management ICs, specifically within DC-DC converters, and is a key building block in distributed power architectures.
Key features of the STPM066S include a peak efficiency of 95%, a switching frequency adjustable from 200kHz to 2.2MHz, and a low quiescent current of 40uA in light-load mode. The device also offers a precision enable pin with hysteresis, soft-start to limit inrush current, and comprehensive protection features including overcurrent, overvoltage, and thermal shutdown. The integrated MOSFETs have low RDS(on) of 80mOhm (high-side) and 40mOhm (low-side), minimizing conduction losses.
Technically, the STPM066S employs a current-mode control architecture, providing fast transient response and stable operation with a wide range of output capacitors. The adjustable switching frequency allows designers to optimize efficiency versus component size, while the external compensation pin offers flexibility in loop tuning. The device is available in a QFN-16 package with an exposed thermal pad, achieving a thermal resistance of 25°C/W, enabling reliable operation at high ambient temperatures.
Typical applications include industrial power supplies, automotive infotainment systems, battery-powered equipment, and distributed power architectures in telecom and networking equipment. The wide input range and high efficiency make it ideal for pre-regulation in multi-rail systems, where it steps down a high-voltage bus to an intermediate rail for downstream LDOs or point-of-load converters.
When designing with the STPM066S, ensure proper input and output capacitor selection to minimize voltage ripple and maintain stability. The bootstrap capacitor for the high-side driver must be placed close to the BST pin, and the feedback network should be routed away from the inductor to avoid noise coupling. Adequate copper pour on the thermal pad is essential for heat dissipation at high output currents.
ドロップイン代替品: STPM066S — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
STPM066
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STPM066S-Q1
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LT8640
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STPM066S 最大定格＆電気的特性
| 入力電圧範囲 | 4.5 V to 66 V |
| 出力電圧範囲 | 0.8 V to 60 V |
| 最大出力電流 | 3 A |
| Peak Efficiency | 95% |
| スイッチング周波数 | 200 kHz to 2.2 MHz |
| 静止電流 | 40 uA (light load) |
| High-Side RDS(on) | 80 mOhm |
| Low-Side RDS(on) | 40 mOhm |
| Control Architecture | Current Mode |
| パッケージ | QFN-16 (4x4 mm) |
| 熱抵抗 | 25 C/W |
| 動作温度 | -40C to +125C |
| イネーブルピン | Yes (with hysteresis) |
| ソフトスタート | Internal |
| Protection Features | OCP, OVP, Thermal Shutdown |
| RoHS ステータス | Compliant |
STPM066S ピン構成
| ピン 1 | BST — Bootstrap capacitor connection for high-side driver |
| ピン 2 | SW — Switch node output |
| ピン 3 | GND — Ground |
| ピン 4 | GND — Ground |
| ピン 5 | FB — Feedback voltage input |
| ピン 6 | COMP — Compensation network connection |
| ピン 7 | EN — Enable input (active high) |
| ピン 8 | VIN — Input supply voltage |
| ピン 9 | VIN — Input supply voltage |
| ピン 10 | GND — Ground |
| ピン 11 | GND — Ground |
| ピン 12 | VOUT — Output voltage |
| ピン 13 | VOUT — Output voltage |
| ピン 14 | GND — Ground |
| ピン 15 | GND — Ground |
| ピン 16 | PAD — Exposed thermal pad (ground) |
主な用途
STPM066S の用途: 6 件s: Industrial Power Supplies, Automotive Infotainment, Battery-Powered Equipment, Telecom and Networking, Medical Devices, LED Lighting.
Industrial Power Supplies
The STPM066S is ideal for industrial power supplies that require a wide input voltage range and high efficiency. Its 4.5V to 66V input range accommodates 24V and 48V industrial bus systems, while the 3A output current can power sensors, actuators, and control logic. The high efficiency reduces heat dissipation, enabling compact enclosures without active cooling. In a typical industrial power supply, the STPM066S steps down a 48V bus to a 5V or 3.3V rail for microcontrollers and communication interfaces. The adjustable switching frequency allows optimization for EMI compliance, and the integrated protection features ensure reliable operation in harsh environments. The low quiescent current is beneficial for always-on systems that need to minimize standby power consumption.
おすすめ
Automotive Infotainment
In automotive infotainment systems, the STPM066S provides a robust power solution for head units, displays, and audio amplifiers. The wide input range handles load-dump transients up to 66V, and the -40°C to +125°C operating range ensures reliability in extreme temperatures. The 3A output current can power multiple rails, such as 5V for USB ports and 3.3V for application processors. The high efficiency minimizes heat in the dashboard, and the low quiescent current helps reduce battery drain when the vehicle is off. The STPM066S can be used in a pre-regulator configuration, stepping down the 12V battery voltage to an intermediate rail for downstream LDOs, ensuring clean power for sensitive audio and video components.
おすすめ
Battery-Powered Equipment
The STPM066S is well-suited for battery-powered equipment such as portable instruments, IoT devices, and wireless sensors. Its high efficiency (up to 95%) and low quiescent current (40uA) extend battery life, making it ideal for applications where power consumption is critical. The wide input range allows operation from multi-cell battery packs (e.g., 2S to 8S Li-ion) without additional regulation. In a typical IoT sensor node, the STPM066S steps down a 12V battery to 3.3V for the microcontroller and wireless transceiver. The light-load mode maintains high efficiency at low currents, and the enable pin allows power gating to further reduce standby power. The compact QFN-16 package saves board space in space-constrained designs.
おすすめ
Telecom and Networking
In telecom and networking equipment, the STPM066S provides efficient power conversion for routers, switches, and base stations. The wide input range supports 48V telecom bus systems, and the 3A output current can power line cards, FPGAs, and ASICs. The high efficiency reduces cooling requirements in densely packed racks, and the adjustable switching frequency allows synchronization to avoid interference with communication signals. The STPM066S can be used in a distributed power architecture, stepping down a 48V bus to an intermediate 12V rail, which is then converted to lower voltages by point-of-load converters. The integrated protection features ensure reliable operation in mission-critical applications.
おすすめ
Medical Devices
The STPM066S is suitable for medical devices that require reliable and efficient power conversion. Its wide input range and high efficiency make it ideal for battery-powered portable medical equipment, such as patient monitors and infusion pumps. The low quiescent current extends battery life, and the integrated protection features ensure safe operation. In a typical patient monitor, the STPM066S steps down a 12V battery to 5V for the display and 3.3V for the microcontroller. The adjustable switching frequency allows optimization for EMI compliance, which is critical in medical environments. The compact package and high thermal performance enable reliable operation in compact enclosures.
おすすめ
LED Lighting
The STPM066S can be used in LED lighting applications to provide a constant voltage supply for LED drivers. Its wide input range supports various AC/DC adapter outputs, and the high efficiency reduces heat in the lighting fixture. The 3A output current can power multiple LED strings, and the adjustable output voltage allows precise control of the LED current via a constant-current driver. In a typical LED lighting system, the STPM066S steps down a 24V supply to 12V for the LED driver, which then regulates the current to the LEDs. The low quiescent current is beneficial for standby modes, and the protection features ensure safe operation in case of LED faults.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STPM066S — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STPM066 | STPM066S-Q1 | TPS54360 | LT8640 |
|---|---|---|---|---|---|
| Package | QFN-16 (4x4 mm) | QFN-16 (4x4 mm) - same | QFN-16 (4x4 mm) - same | SOIC-8 - different | QFN-16 (4x4 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Analog Devices |
| Input Voltage Range | 4.5V to 66V | 4.5V to 66V | 4.5V to 66V | 4.5V to 60V | 3.4V to 42V |
| Output Current | 3A | 3A | 3A | 3.5A | 5A |
| Peak Efficiency | 95% | 95% | 95% | 92% | 96% |
| Switching Frequency | 200kHz to 2.2MHz | 200kHz to 2.2MHz | 200kHz to 2.2MHz | 100kHz to 2.5MHz | 200kHz to 2.2MHz |
| Quiescent Current | 40uA | 40uA | 40uA | 146uA | 2.5uA |
| Automotive Grade | No | No | Yes (AEC-Q100) | No | No |
主な差別化要因
- Wide input voltage range up to 66V （vs LT8640)
- Automotive grade option available （vs TPS54360)
- Low quiescent current of 40uA （vs TPS54360)
設計ノート
Place the input capacitor (10uF ceramic) as close as possible to the VIN and GND pins to minimize input voltage ripple and reduce EMI. The output capacitor (22uF ceramic) should be placed near the VOUT and GND pins. Use a 0.1uF bootstrap capacitor between BST and SW pins, placed within 5mm of the IC. Ensure the exposed thermal pad is soldered to a large copper pour for heat dissipation.
At VIN=24V, VOUT=5V, and 3A load, the power dissipation is approximately 3.6W (assuming 85% efficiency). With a thermal resistance of 25°C/W, the junction temperature rise is 90°C above ambient. For reliable operation at high ambient temperatures, provide at least 1 square inch of copper on the thermal pad layer and consider adding thermal vias to the ground plane.
Do not exceed the absolute maximum input voltage of 66V. Ensure the feedback resistor divider uses 1% tolerance resistors to maintain output voltage accuracy. The compensation network (COMP pin) must be tuned for the selected output capacitor and switching frequency to ensure stability. Avoid routing the feedback trace near the inductor or switch node to prevent noise coupling.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified for standard version; choose STPM066S-Q1 for automotive.
