XC3S200-4FT256I - 200K Spartan-3 FPGA | AMD | FTBGA-256
部品番号: XC3S200-4FT256I ✗ 生産終了XC3S200-4FT256I 概要
A field-programmable gate array is a configurable digital semiconductor containing programmable logic blocks, programmable interconnect, and input/output resources. An FPGA belongs to the semiconductor hierarchy, programmable-logic IC hierarchy, and Spartan-3 FPGA family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows system designers to implement parallel logic, control functions, signal processing, and interface logic in hardware and later update the configuration through a configuration memory or JTAG programming path.
The XC3S200-4FT256I combines 4,320 logic cells with 200K system gates and a maximum clock frequency of 630 MHz. The -4 speed designation identifies the performance grade, while the I suffix identifies the industrial temperature grade. The device is specified for 0 C to +85 C operation in the supplied distributor data, making it suitable for industrial and embedded control equipment where environmental requirements exceed consumer-grade conditions.
The 17 mm by 17 mm FTBGA-256 package supports compact PCB layouts but requires careful escape routing, via-in-pad or via fan-out strategies, assembly-process control, and inspection. The 1.2 V core supply requires a regulated, low-noise supply rail and appropriate power-plane distribution. Because this is a legacy Spartan-3 FPGA, designers should also verify configuration memory availability, toolchain support, lifecycle status, and second-source requirements before committing a new production design.
Typical applications include industrial control, instrumentation, data acquisition, communication interfaces, embedded signal processing, and prototype systems requiring configurable parallel logic. The high-pin-count package is particularly useful when the design needs numerous user I/O or dedicated interface resources, although the exact user I/O count is not provided in the verified data.
A key design consideration is that replacing an XC3S200-4FT256I is not limited to matching its package. A true drop-in candidate must also preserve pin assignment, voltage requirements, configuration behavior, timing characteristics, and software support. This page summarizes verified distributor and manufacturer-linked information, compares documented drop-in candidates, and identifies engineering details that must be confirmed before PCB release.
ドロップイン代替品: XC3S200-4FT256I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC3S200-4FT256I （同一形状・フットプリント） — 相違点: Mounting Type, Operating Temperature, RoHS Status, System Gates.
XC3S200AN-4FT256I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XC3S200-4FTG256I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC3S250E-4FT256I
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XC3S200-4FT256I 最大定格＆電気的特性
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 50,000 gates |
| Nominal System Gates | 200,000 gates |
| Logic Cells / Logic Blocks | 4,320 |
| 最大クロック周波数 | 630 MHz |
| Technology | 90 nm |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Package Type | FTBGA-256 |
| Package Dimensions | 17 mm x 17 mm |
| Number of Terminals | 256 |
| 実装タイプ | Surface Mount |
| 動作温度 | 0 C to +85 C |
| Device Family | Spartan-3 |
| Speed Grade | -4 |
| Temperature Grade | Industrial |
| RoHS ステータス | Compliant |
XC3S200-4FT256I 17 mm x 17 mm ピン配置ガイド
XC3S200-4FT256I (17 mm x 17 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC3S200-4FT256I.
詳細は データシート をご参照ください。
主な用途
XC3S200-4FT256I の用途: 6 件s: Industrial Control Logic, Data Acquisition and Instrumentation, Communication Interface Consolidation, Embedded Signal Processing, Programmable Logic Prototyping, Custom Timing and Trigger Systems.
Industrial Control Logic
The XC3S200-4FT256I fits industrial control systems requiring configurable parallel logic, deterministic sequencing, and multiple external interfaces. Its 4,320 logic cells provide capacity for state machines, interlocks, counters, and supervisory control, while the 630 MHz maximum clock supports faster control-loop or communication-handling logic. The 0 C to +85 C industrial grade supports equipment operating across the stated environmental range. Designers should use the official ball map for I/O placement and confirm configuration retention because the supplied data does not identify the exact user-I/O count.
おすすめ
Data Acquisition and Instrumentation
The XC3S200-4FT256I can implement parallel sampling control, trigger sequencing, digital filtering, and data-format conversion in a compact instrument. A 630 MHz maximum device clock allows time-critical logic to be divided into multiple lower-frequency pipeline stages, while 200K system gates provide room for acquisition state machines and interface controllers. For measurement systems, isolate sensitive analog circuitry from FPGA switching and provide a low-noise 1.2 V core rail. Exact ADC interface timing and I/O voltage requirements remain to be confirmed from the complete datasheet.
おすすめ
Communication Interface Consolidation
The XC3S200-4FT256I is suitable for implementing protocol controllers, UART, SPI, Ethernet framing, or custom communication links in parallel hardware. Its 4,320 logic cells and 630 MHz maximum clock provide a balance between throughput and routing complexity for medium-speed embedded interfaces, while the 256-ball package offers numerous potential I/O sites. Because the verified data does not state user-I/O counts or supported I/O standards, engineers must confirm pin capabilities and voltage levels before assigning a bus. JTAG access and board-level test points should be included.
おすすめ
Embedded Signal Processing
The XC3S200-4FT256I can implement fixed-function digital filters, correlation, packet parsing, or sensor-data conditioning using parallel FPGA logic. The 630 MHz maximum clock enables pipelined processing stages, and the 4,320-cell fabric is suitable for moderate algorithmic widths rather than large processor-class workloads. Keep arithmetic paths short to simplify timing closure, and use synchronous design practices with registered pipeline boundaries. Block RAM, DSP resources, and specific performance figures are not included in the supplied data, so those values must be checked before sizing the algorithm.
おすすめ
Programmable Logic Prototyping
The XC3S200-4FT256I supports prototypes that combine control logic, interface adaptation, and parallel algorithms without producing a custom ASIC. Its 200K system gates and 4,320 logic cells are sufficient for educational, proof-of-concept, and legacy industrial-control designs, while the 630 MHz maximum clock supports synchronous logic and test benches. A migration plan should preserve configuration files, timing constraints, and pin constraints because changing to another FPGA can require complete toolchain and pinout verification. The FTBGA package also demands careful PCB assembly planning.
おすすめ
Custom Timing and Trigger Systems
The XC3S200-4FT256I can implement precise counters, programmable delays, trigger matrices, and multi-channel sequencing for test and measurement equipment. Its 630 MHz maximum clock supports high-rate timing references, while the 4,320 logic cells allow parallel channel logic and control-state machines to coexist on one device. Use dedicated clock routing, account for board skew and jitter, and keep trigger outputs synchronized through registered logic. Exact I/O standards and output timing are not present in the supplied data and must be verified from official timing specifications.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC3S200-4FT256I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC3S200AN-4FT256I | XC3S200-4FTG256I | XC3S250E-4FT256I |
|---|---|---|---|---|
| Package | FTBGA-256 | FTBGA-256 | FTBGA-256 | FTBGA-256 |
| Brand | AMD | AMD | AMD | AMD |
| Device Family | Spartan-3 | Spartan-3A | Spartan-3 | Spartan-3E |
| Package Dimensions | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm | 17 mm x 17 mm |
主な差別化要因
- Original 200K Spartan-3 resource level （vs XC3S250E-4FT256I)
- Directly documented 630 MHz clock rating （vs XC3S200AN-4FT256I)
- Verified original-family 256-terminal package and supply data （vs XC3S200AN-4FT256I)
設計ノート
Design the 17 mm x 17 mm FTBGA-256 layout from the official package drawing rather than from a generic BGA escape pattern. Confirm ball-pitch, ball-map orientation, pad and solder-mask definitions, via requirements, and assembly-process capability with the exact device documentation. Keep the core-supply, ground, configuration, clock, and JTAG routing consistent with the manufacturer guidelines before releasing fabrication files.
The verified core-supply range is 1.14 V to 1.26 V, with approximately 1.2 V as the nominal operating point. Use a supply capable of meeting the required transient current, place local decoupling at the device, and provide low-impedance power and ground planes. Exact capacitor values and current limits are not present in the supplied data, so follow the official power-distribution and decoupling guidance before finalizing the schematic.
Treat clocks, JTAG, configuration interfaces, and high-speed user I/O as separate routing classes. Use short clock paths, avoid unnecessary stubs, provide clean return paths, and validate source-synchronous or externally clocked interfaces with board-level simulation. The maximum device clock is 630 MHz, but achievable system timing depends on routing, logic depth, I/O standards, and external clock quality.
Do not treat an FTBGA package match as proof of drop-in compatibility. Confirm the complete ordering code, ball assignment, device status, speed grade, temperature grade, configuration method, pin standards, and synthesis-tool support. The verified data does not supply a full programming pinout or a guaranteed cross-brand replacement, so use the official Spartan-3 documentation and obtain AMD or distributor confirmation before substitution.
コンプライアンス情報
RoHS compliance is identified in the supplied comparison data. The verified sources do not establish REACH, halogen-free, conflict-minerals, or automotive qualification status. The -I suffix identifies the industrial temperature grade in the supplied distributor data, not AEC-Q100 qualification.
