AMD

XC7Z030-1SBG485C - 125K Logic Cell Zynq SoC | AMD

部品番号: XC7Z030-1SBG485C ✓ 生産中
484-FCBGA, 19 mm x 19 mm Package 667 MHz Speed
MOQ: 1 |

XC7Z030-1SBG485C 概要

The AMD XC7Z030-1SBG485C is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor, CoreSight debug capability, and 125K FPGA logic cells in a 484-pin FCBGA package measuring 19 mm by 19 mm. The integrated processor operates at 667 MHz, while the programmable logic fabric provides hardware acceleration for demanding embedded applications.

A Zynq-7000 SoC is an FPGA and CPLD architecture that integrates programmable logic with a complete processing system on one silicon device. The ARM Cortex-A9 side executes operating-system software, networking protocols, and control code, while the Kintex-7 fabric implements parallel data paths, interfaces, signal processing, and other hardware-specific functions. This combination reduces the component count and board area compared with separate processors and FPGAs.

The XC7Z030 device provides 125K logic cells and 130 I/O resources in the specified FCBGA package. Its dual Cortex-A9 processor runs at 667 MHz, supporting the Zynq-7000 family's combination of hard real-time control and software flexibility. CoreSight support adds dedicated debug visibility for processor and programmable-logic development, helping engineers isolate software faults, hardware transactions, and system-level integration issues.

The XC7Z030 uses the Kintex-7 programmable fabric and provides approximately 47% more logic capacity than the XC7Z020 according to the device comparison information. That increase is valuable when a design needs more parallel processing resources without moving to the larger XC7Z045 or XC7Z100 devices. Logic density, package pinout, processor speed, memory requirements, and I/O allocation must nevertheless be checked against the complete board design before any replacement is approved.

Typical uses include industrial control gateways, embedded network equipment, high-speed data acquisition, machine vision, communications infrastructure, and test systems requiring a deterministic programmable-logic pipeline alongside a Linux-capable processor. The architecture is particularly suitable when software controls the system while FPGA logic handles timing-critical sampling, protocol handling, or high-volume parallel computation.

Board design must treat the 484-pin FCBGA as a high-density, fine-pitch assembly with demanding escape-routing, via-in-pad, and thermal-management requirements. Validate the exact SBG485 pin assignments against the AMD package-placement documentation, maintain power and ground-plane integrity, and plan test access before committing to the PCB layout. Software compatibility also depends on the selected device, board configuration, and toolchain.

This page combines the verified device identity, package information, processor and logic resources, documented alternatives, and practical design guidance in a form intended to accelerate engineering evaluation and sourcing. It also highlights why package identity alone is insufficient to establish a valid replacement for a programmable SoC.

ドロップイン代替品: XC7Z030-1SBG485C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC7Z030-1SBG485C (同一形状・フットプリント) — 相違点: Package, Logic Cells, Mounting Type, Processor, Processor Core.

AMD
Package: 484-FCBGA (23x23 mm)
Logic Cells: 125K
Mounting Type: Surface Mount
比較対象 XC7Z030-1SBG485C →
AMD
Package: 484-FCBGA
Logic Cells: 125K logic cells
Mounting Type: Surface-mount ball grid array
比較対象 XC7Z030-1SBG485C →
AMD
Package: 484-FCBGA (23x23)
Logic Cells: 125000
Mounting Type: Surface Mount
比較対象 XC7Z030-1SBG485C →
AMD
Package: 484-FCBGA (19x19 mm)
Logic Cells: 125,000
Mounting Type: Surface Mount
比較対象 XC7Z030-1SBG485C →

XC7Z030-L2SBG485I

✅ ドロップイン
📦 484-FCBGA (19x19 mm)
Processor speed is 800 MHz versus 667 MHz, a 20% increase; device retains 125K logic cells and the identified 484-FCBGA format

📋 参考代替品(カタログ未掲載)

XC7Z030-1SBG485I

✅ ドロップイン ⚠️ 仕様未検証
📦 484-FCBGA (19x19 mm)
互換仕様

価格はお問い合わせください

XC7Z030-2SBG485I

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 484-FCBGA (19x19 mm)
Zynq-7000 · Dual ARM Cortex-A9 MPCore with CoreSight · 800 MHz · 125,000 · 28nm · 484-FCBGA (19x19 mm) · -40°C to +100°C · 12-bit

価格はお問い合わせください

データシートを見る →

XC7Z030-1FBG484I

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 484-FCBGA (19x19 mm)
Dual ARM Cortex-A9 MPCore with CoreSight · 667 MHz · 125K · 3.0 Mb · 400 · 484-FCBGA (23x23 mm) · -40°C to +100°C · -1

価格はお問い合わせください

データシートを見る →

XC7Z030-2FBG484I

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 484-FCBGA (19x19 mm)
Zynq-7000 · Dual ARM Cortex-A9 MPCore with CoreSight · 2 · 800 MHz · 125000 · 484-FCBGA (23x23) · -40°C to +100°C · 1.2V to 3.3V

価格はお問い合わせください

データシートを見る →

XC7Z030-1SBG485C 最大定格&電気的特性

Device Type Zynq-7000 Kintex-7 system-on-chip
Processor Core Dual ARM Cortex-A9 MPCore
Processor Frequency 667 MHz
FPGA Logic Cells 125K logic cells
User I/O Count 130 I/Os
パッケージ 484-FCBGA, 19 mm x 19 mm
ピン数 484 pins
Programmable Logic Family Kintex-7
Debug Support CoreSight
FPGA Logic Capacity Advantage over XC7Z020 Approximately 47%
実装タイプ Surface-mount FCBGA
Device Classification FPGA and CPLD with integrated ARM processor

XC7Z030-1SBG485C 484-fcbga, 19 mm x 19 mm ピン配置ガイド

XC7Z030-1SBG485C (484-fcbga, 19 mm x 19 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC7Z030-1SBG485C の 484-fcbga, 19 mm x 19 mm パッケージピン配置図

詳細なピン配置データはありません: XC7Z030-1SBG485C.

詳細は データシート をご参照ください。

主な用途

XC7Z030-1SBG485C の用途: 6 件s: Industrial Control Gateway, High-Speed Data Acquisition, Machine Vision Processing, Embedded Network Equipment, Communications Test Equipment, Programmable Logic Embedded Platform.

🏭

Industrial Control Gateway

The XC7Z030-1SBG485C fits an industrial gateway that must combine network and control software with deterministic hardware I/O. Its dual 667 MHz Cortex-A9 cores can execute protocols, device management, and operating-system services, while the 125K Kintex-7 logic cells can accelerate packet filtering or manage time-critical interfaces. Partitioning latency-sensitive tasks into programmable logic reduces dependence on software scheduling. The 484-FCBGA also provides 130 I/Os for industrial connectivity, but exact buffer standards, isolation, surge requirements, and the device temperature range must be matched to the installation environment before schematic release.

⚡

High-Speed Data Acquisition

The XC7Z030-1SBG485C is suitable for data-acquisition equipment that needs flexible sampling logic alongside a general-purpose processor. The 125K Kintex-7 fabric can implement parallel ADC interfaces, digital filters, trigger logic, and local data movement, while the dual Cortex-A9 cores perform calibration, configuration, and host communication. This division of labor allows repeatable hardware timing without implementing every acquisition function in software. Engineering teams should budget the device for 130 I/Os, define serializer or parallel-interface requirements, and verify the exact pin assignments and power rails against the SBG485 package documentation.

🎥

Machine Vision Processing

The XC7Z030-1SBG485C can support machine-vision systems that combine image capture, pixel processing, object detection, and system control. Parallel sensor interfaces, thresholding, filtering, and frame transfer can be implemented efficiently in the 125K-cell Kintex-7 fabric, while the 667 MHz dual Cortex-A9 subsystem manages control flow, image algorithms, networking, and diagnostics. The integrated architecture reduces the need for a separate FPGA and processor board. Before selection, confirm that the required image interface bandwidth, external memory interface, camera I/O, and application-specific processing fit the exact XC7Z030 resource and pin constraints.

🌐

Embedded Network Equipment

The XC7Z030-1SBG485C is appropriate for embedded networking equipment requiring concurrent packet handling and control-plane software. The ARM Cortex-A9 cores can run networking stacks, configuration agents, and management services, while programmable logic can implement packet classification, compression, encryption, or custom interfaces. The SoC integration simplifies synchronization between software and hardware and reduces board area compared with separate components. Designers should establish throughput targets, memory requirements, protocol offload boundaries, and thermal limits before committing, because the 130 I/O count and 125K logic cells do not independently determine final network performance.

📡

Communications Test Equipment

The XC7Z030-1SBG485C can be used in communications test equipment where programmable sequences and real-time analysis must coexist with a higher-level user interface. Kintex-7 logic can generate test patterns or process captured data deterministically, while the dual 667 MHz Cortex-A9 cores execute test control, logging, and user-facing software. CoreSight visibility supports development and fault isolation across processor and programmable-logic domains. The implementation should account for external memory capacity, high-speed I/O standards, clocking, and trigger timing, and it should use AMD's exact SBG485 placement information to ensure every ball and supply connection is correct.

🧩

Programmable Logic Embedded Platform

The XC7Z030-1SBG485C serves as a unified embedded platform when a product needs FPGA flexibility without abandoning a conventional processor software model. The Cortex-A9 subsystem can run an operating system or bare-metal control code, while developers implement device drivers, accelerators, and custom peripherals in the Kintex-7 fabric. This arrangement supports long product lifecycles and field-updatable functionality. A robust design should partition interfaces cleanly between processor and programmable logic, document shared-memory and interrupt behavior, and validate toolchain, boot configuration, debug access, and peripheral assignments for the selected device variant.

What is the AMD XC7Z030-1SBG485C?
The AMD XC7Z030-1SBG485C is a Zynq-7000 Kintex-7 system-on-chip with a dual-core 667 MHz ARM Cortex-A9 MPCore processor, 125K FPGA logic cells, CoreSight debug support, and 130 I/Os in a 484-FCBGA package. According to the AMD Zynq-7000 data sheet, the device combines a hard processor subsystem with programmable Kintex-7 logic for embedded control and hardware acceleration.
How much FPGA logic does the XC7Z030-1SBG485C contain?
The XC7Z030-1SBG485C contains 125K FPGA logic cells and 130 I/Os. Device information identifies its programmable fabric as Kintex-7 and reports approximately 47% more logic capacity than the XC7Z020. The additional capacity is useful for parallel data paths, communication interfaces, signal processing, and custom accelerators, but a design should still be checked against memory and DSP requirements.
Where can I download the XC7Z030-1SBG485C datasheet?
The official XC7Z030-1SBG485C data sheet is available through AMD at the DS191 Zynq-7000 document link on this page. Use the AMD publication for electrical characteristics, DC and AC operating limits, device identification, and family-level specifications. The UG585 Zynq-7000 SoC Technical Reference Manual and the SBG485 package-placement diagram are also required for pin assignments and register-level design work.
Where is the XC7Z030-1SBG485C pinout located?
The XC7Z030-1SBG485C pin assignments are identified in the AMD XC7Z30-SBG485 package-placement diagram and the DS191 device data sheet. Because the device has 484 fine-pitch package positions, use those AMD documents when assigning ball locations and power rails rather than relying on a generic BGA drawing. Confirm every connection against the exact -1SBG485C ordering code before PCB release.
What is the difference between XC7Z030-1SBG485C and XC7Z035-1SBG485C?
The XC7Z030-1SBG485C provides 125K logic cells, while the XC7Z035-1SBG485C belongs to the higher-density Zynq-7000 family and offers additional programmable resources. The published comparison identifies FPGA resources, ARM processing, DSP, memory, and package compatibility as the relevant checks. A Z-7035 is not automatically interchangeable with a Z-7030 because higher logic density can change I/O allocation and board requirements.
Can XC7Z030-1SBG485C be replaced by XC7Z030-1FBG484I?
The XC7Z030-1FBG484I may have a comparable 484-ball device format, but package similarity alone does not establish a valid drop-in replacement. The comparison information associates XC7Z030-1FBG484I with the XC7Z030 family, while the exact SBG485 and FBG484 ball maps, temperature grades, speed grades, power pins, and supply rails must be verified in AMD documentation before substitution.
What is the best drop-in replacement for XC7Z030-1SBG485C?
The closest replacement must match the SBG485 footprint, ball assignments, speed grade, temperature grade, power architecture, and device density; no universal drop-in substitute can be declared from package size alone. XC7Z030-L2SBG485I uses the same 484-FCBGA format but operates at 800 MHz, so it adds 20% processor performance and changes timing and power assumptions. Review the AMD documentation and validate the complete design before substitution.
Is XC7Z030-1SBG485C suitable for industrial control systems?
The XC7Z030-1SBG485C is suitable for industrial control applications when its specified temperature range, power limits, and lifecycle requirements meet the system constraints. Its dual 667 MHz Cortex-A9 cores can run control software, while 125K Kintex-7 logic cells can implement deterministic I/O handling and parallel processing. Industrial qualification and operating-temperature limits should be confirmed for the exact ordering code.
XC7Z030-1SBG485C vs XC7Z030-L2SBG485I: which is better for a timing-critical design?
The XC7Z030-L2SBG485I offers an 800 MHz Cortex-A9 processor compared with the 667 MHz processor in the XC7Z030-1SBG485C, a 20% increase in nominal processor frequency. Both use the identified 484-FCBGA family format, but the faster grade can change timing closure, power consumption, and thermal requirements. Select based on the full processor, I/O, and thermal design rather than clock frequency alone.
When should I choose XC7Z030-1SBG485C over a higher-density Zynq device?
Choose the XC7Z030-1SBG485C when a design fits within 125K logic cells, 130 I/Os, and the available memory and DSP resources. The device provides approximately 47% more logic than the XC7Z020 while avoiding the larger XC7Z045 and XC7Z100 footprints and resource counts. Moving to a higher-density Zynq can affect pin assignment, power planning, PCB complexity, cost, and software configuration.
Is XC7Z030-1SBG485C the same as XC7Z030-1FBG484I?
No conclusion of identity should be made solely from their Zynq-7000 naming and 484-ball format. The XC7Z030-1SBG485C is explicitly identified as an SBG485 package, while XC7Z030-1FBG484I uses an FBG484 designation. The exact ball maps, package outlines, electrical connections, temperature grades, and supported power configurations must match before treating either device as an interchangeable replacement.
How do I design the power and ground system for the XC7Z030-1SBG485C?
Design the XC7Z030-1SBG485C as a multi-rail, high-performance SoC and follow the power-supply, decoupling, and plane-connection guidance in the AMD DS191 data sheet and UG585 technical reference manual. Separate logic and I/O supplies require exact voltage values from those documents. Place decoupling capacitors at the package pins, provide low-impedance power and ground planes, and verify startup and sequencing behavior with measured rail waveforms.
What PCB considerations matter for the XC7Z030-1SBG485C 484-FCBGA?
The 484-FCBGA requires careful escape routing, fine-pitch pad geometry, adequate layer switching, and direct access to power and ground balls. Follow the exact SBG485 package-placement diagram and AMD PCB guidelines, including via-in-pad, solder-mask, and thermal-via practices where specified. Avoid long point-to-point power paths and validate high-speed signal integrity and assembly yield before production.
Where can I buy XC7Z030-1SBG485C and what is its lead time?
Use the Request a Quote form on this page to request XC7Z030-1SBG485C availability, lead time, and order quantities. The part is currently represented in distributor catalogs for the AMD device, but a confirmed shipment date depends on inventory and the selected order quantity. For production planning, request a written lead-time statement and include the required delivery schedule in the quotation request.
What is the price of the XC7Z030-1SBG485C?
Current XC7Z030-1SBG485C pricing is handled through the Request a Quote form on this page rather than through a static price statement. The form can establish availability for the exact 484-FCBGA ordering code, quantity break requirements, and delivery schedule. For a production BOM, also ask the manufacturer or authorized channel to confirm whether an alternative lifecycle grade is available before changing the specified part.
What are the key specifications engineers should know about XC7Z030-1SBG485C?
The key specifications are a dual-core 667 MHz ARM Cortex-A9 MPCore processor, 125K Kintex-7 logic cells, 130 I/Os, CoreSight debug support, and a 484-FCBGA package measuring 19 mm by 19 mm. According to the AMD Zynq-7000 documentation, the device also provides approximately 47% more logic capacity than the XC7Z020. Memory, DSP, temperature, speed, and power details must be selected from the exact device tables.

エンジニアリング参考データ: XC7Z030-1SBG485C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC7Z030-1SBG485C when an embedded design needs a 667 MHz dual Cortex-A9 processor and 125K Kintex-7 logic cells in the 484-FCBGA format. It offers approximately 47% more logic than the XC7Z020 while avoiding the resource scale of the XC7Z045 and XC7Z100. Select XC7Z030-L2SBG485I when the additional 20% nominal processor speed is justified and power and timing have been revalidated. Consider XC7Z030-1SBG485I or another I-suffix option only after confirming the required temperature grade. FBG484 variants require exact package-code, ball-map, outline, and electrical review; they are not interchangeable merely because all use 484 balls. For any proposed replacement, verify logic and memory resources, pin assignments, speed grade, temperature range, supply rails, boot configuration, PCB footprint, and the complete hardware-software validation plan.

代替品との比較

パラメータ この製品 XC7Z030-L2SBG485I XC7Z030-1SBG485I XC7Z030-2SBG485I XC7Z030-1FBG484I XC7Z030-2FBG484I
Brand AMD AMD AMD AMD AMD AMD
Package 484-FCBGA (19x19 mm) 484-FCBGA (19x19 mm) 484-FCBGA (19x19 mm) 484-FCBGA (19x19 mm) 484-FCBGA (19x19 mm) 484-FCBGA (19x19 mm)
Processor Core Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Processor Frequency 667 MHz 800 MHz 667 MHz 667 MHz 667 MHz 667 MHz
FPGA Logic Cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells
Speed Grade -1 -2 -1 -2 -1 -2
Programmable Logic Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight
Temperature-Grade Suffix C I I I I I

主な差別化要因

  • Balanced Zynq integration with 125K logic cells (vs XC7Z030-1FBG484I)
  • Nominal 667 MHz processor operating point (vs XC7Z030-L2SBG485I)
  • Documented 130-I/O integration (vs XC7Z030-1FBG484I)

設計ノート

Use the AMD XC7Z30-SBG485 package-placement diagram as the controlling ball-map reference during schematic and PCB layout. Confirm every power, ground, configuration, clock, and user I/O assignment against the exact XC7Z030-1SBG485C ordering code. Treat the 484-FCBGA as a fine-pitch assembly: define pad and solder-mask geometry using AMD PCB guidelines, provide adequate escape-routing layers, and conduct assembly and signal-integrity reviews before releasing the production design.

Plan the XC7Z030-1SBG485C as a multi-rail SoC and obtain the exact DC operating limits, supply-voltage tolerances, power-up sequence, and current limits from the DS191 data sheet. Place required bulk and high-frequency decoupling close to the relevant package balls, keep supply and ground paths low-impedance, and reserve measurement points for startup and steady-state verification. Sequence-dependent interfaces must be checked so that external devices are never driven beyond their permitted voltage during power transitions.

The XC7Z030-1SBG485C combines processor and programmable-logic activity in one high-power FCBGA package, so board construction directly affects junction temperature and long-term reliability. Use the package thermal data and power estimates from AMD to establish a worst-case dissipation budget. Provide uninterrupted top and inner copper planes, evaluate thermal vias beneath the device, model the assembled board in its enclosure, and verify temperature rise during maximum processor and logic utilization rather than relying only on an idle-board measurement.

Do not approve a replacement based only on the 484-ball count, nominal processor frequency, or a similar XC7Z030 family name. The SBG485 and FBG484 package codes require exact ball-map and outline verification, while -1 and -2 speed grades can change timing and power behavior. Industrial I suffixes also require temperature-grade review. Before substitution, compare the ordering-code tables, package drawings, power specifications, and configuration requirements, then repeat hardware and software validation on the revised design.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status was not stated in the cited product listings or device data excerpt and must be confirmed for the exact ordering code.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc7z030 1sbg485c xc7z030 1sbg485i xc7z030 2sbg485i xc7z030 1fbg484i xc7z030 2fbg484i XC7Z030-1SBG485C datasheet XC7Z030-1SBG485C datasheet pdf XC7Z030-1SBG485C pinout XC7Z030-1SBG485C replacement XC7Z030-1SBG485C equivalent XC7Z030-1SBG485C vs XC7Z030-L2SBG485I AMD XC7Z030-1SBG485C XC7Z030-1SBG485C price XC7Z030-1SBG485C stock XC7Z030-1SBG485C application circuit

関連部品&用語

AMD Xilinx XC7Z030-1SBG485C XC7Z030-L2SBG485I XC7Z030-1SBG485I XC7Z030-2SBG485I XC7Z030-1FBG484I XC7Z030-2FBG484I Zynq-7000 system-on-chip SoC FPGA CPLD ARM Cortex-A9 MPCore CoreSight Kintex-7 125K logic cells 667 MHz 484-FCBGA BGA package family surface-mount semiconductor industrial control machine vision data acquisition embedded networking
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示