XC7Z030-1SBG485C - 125K Logic Cell Zynq SoC | AMD
N.º da peça: XC7Z030-1SBG485C ✓ AtivoXC7Z030-1SBG485C Visão geral
A Zynq-7000 SoC is an FPGA and CPLD architecture that integrates programmable logic with a complete processing system on one silicon device. The ARM Cortex-A9 side executes operating-system software, networking protocols, and control code, while the Kintex-7 fabric implements parallel data paths, interfaces, signal processing, and other hardware-specific functions. This combination reduces the component count and board area compared with separate processors and FPGAs.
The XC7Z030 device provides 125K logic cells and 130 I/O resources in the specified FCBGA package. Its dual Cortex-A9 processor runs at 667 MHz, supporting the Zynq-7000 family's combination of hard real-time control and software flexibility. CoreSight support adds dedicated debug visibility for processor and programmable-logic development, helping engineers isolate software faults, hardware transactions, and system-level integration issues.
The XC7Z030 uses the Kintex-7 programmable fabric and provides approximately 47% more logic capacity than the XC7Z020 according to the device comparison information. That increase is valuable when a design needs more parallel processing resources without moving to the larger XC7Z045 or XC7Z100 devices. Logic density, package pinout, processor speed, memory requirements, and I/O allocation must nevertheless be checked against the complete board design before any replacement is approved.
Typical uses include industrial control gateways, embedded network equipment, high-speed data acquisition, machine vision, communications infrastructure, and test systems requiring a deterministic programmable-logic pipeline alongside a Linux-capable processor. The architecture is particularly suitable when software controls the system while FPGA logic handles timing-critical sampling, protocol handling, or high-volume parallel computation.
Board design must treat the 484-pin FCBGA as a high-density, fine-pitch assembly with demanding escape-routing, via-in-pad, and thermal-management requirements. Validate the exact SBG485 pin assignments against the AMD package-placement documentation, maintain power and ground-plane integrity, and plan test access before committing to the PCB layout. Software compatibility also depends on the selected device, board configuration, and toolchain.
This page combines the verified device identity, package information, processor and logic resources, documented alternatives, and practical design guidance in a form intended to accelerate engineering evaluation and sourcing. It also highlights why package identity alone is insufficient to establish a valid replacement for a programmable SoC.
Alternativas drop-in para XC7Z030-1SBG485C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7Z030-1SBG485C (mesmo formato e footprint) — diferindo em Package, Logic Cells, Mounting Type, Processor, Processor Core.
XC7Z030-L2SBG485I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7Z030-1SBG485I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
XC7Z030-2SBG485I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7Z030-1FBG484I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7Z030-2FBG484I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7Z030-1SBG485C Classificações máximas e características elétricas
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| FPGA Logic Cells | 125K logic cells |
| User I/O Count | 130 I/Os |
| Encapsulamento | 484-FCBGA, 19 mm x 19 mm |
| Contagem de pinos | 484 pins |
| Programmable Logic Family | Kintex-7 |
| Debug Support | CoreSight |
| FPGA Logic Capacity Advantage over XC7Z020 | Approximately 47% |
| Tipo de montagem | Surface-mount FCBGA |
| Device Classification | FPGA and CPLD with integrated ARM processor |
Guia de Configuração de Pinos do XC7Z030-1SBG485C 484-fcbga, 19 mm x 19 mm
Configuração de pinos para XC7Z030-1SBG485C (pacote 484-fcbga, 19 mm x 19 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7Z030-1SBG485C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7Z030-1SBG485C é adequado para 6 aplicaçãos: Industrial Control Gateway, High-Speed Data Acquisition, Machine Vision Processing, Embedded Network Equipment, Communications Test Equipment, Programmable Logic Embedded Platform.
Industrial Control Gateway
The XC7Z030-1SBG485C fits an industrial gateway that must combine network and control software with deterministic hardware I/O. Its dual 667 MHz Cortex-A9 cores can execute protocols, device management, and operating-system services, while the 125K Kintex-7 logic cells can accelerate packet filtering or manage time-critical interfaces. Partitioning latency-sensitive tasks into programmable logic reduces dependence on software scheduling. The 484-FCBGA also provides 130 I/Os for industrial connectivity, but exact buffer standards, isolation, surge requirements, and the device temperature range must be matched to the installation environment before schematic release.
Recomendado
High-Speed Data Acquisition
The XC7Z030-1SBG485C is suitable for data-acquisition equipment that needs flexible sampling logic alongside a general-purpose processor. The 125K Kintex-7 fabric can implement parallel ADC interfaces, digital filters, trigger logic, and local data movement, while the dual Cortex-A9 cores perform calibration, configuration, and host communication. This division of labor allows repeatable hardware timing without implementing every acquisition function in software. Engineering teams should budget the device for 130 I/Os, define serializer or parallel-interface requirements, and verify the exact pin assignments and power rails against the SBG485 package documentation.
Recomendado
Machine Vision Processing
The XC7Z030-1SBG485C can support machine-vision systems that combine image capture, pixel processing, object detection, and system control. Parallel sensor interfaces, thresholding, filtering, and frame transfer can be implemented efficiently in the 125K-cell Kintex-7 fabric, while the 667 MHz dual Cortex-A9 subsystem manages control flow, image algorithms, networking, and diagnostics. The integrated architecture reduces the need for a separate FPGA and processor board. Before selection, confirm that the required image interface bandwidth, external memory interface, camera I/O, and application-specific processing fit the exact XC7Z030 resource and pin constraints.
Recomendado
Embedded Network Equipment
The XC7Z030-1SBG485C is appropriate for embedded networking equipment requiring concurrent packet handling and control-plane software. The ARM Cortex-A9 cores can run networking stacks, configuration agents, and management services, while programmable logic can implement packet classification, compression, encryption, or custom interfaces. The SoC integration simplifies synchronization between software and hardware and reduces board area compared with separate components. Designers should establish throughput targets, memory requirements, protocol offload boundaries, and thermal limits before committing, because the 130 I/O count and 125K logic cells do not independently determine final network performance.
Recomendado
Communications Test Equipment
The XC7Z030-1SBG485C can be used in communications test equipment where programmable sequences and real-time analysis must coexist with a higher-level user interface. Kintex-7 logic can generate test patterns or process captured data deterministically, while the dual 667 MHz Cortex-A9 cores execute test control, logging, and user-facing software. CoreSight visibility supports development and fault isolation across processor and programmable-logic domains. The implementation should account for external memory capacity, high-speed I/O standards, clocking, and trigger timing, and it should use AMD's exact SBG485 placement information to ensure every ball and supply connection is correct.
Recomendado
Programmable Logic Embedded Platform
The XC7Z030-1SBG485C serves as a unified embedded platform when a product needs FPGA flexibility without abandoning a conventional processor software model. The Cortex-A9 subsystem can run an operating system or bare-metal control code, while developers implement device drivers, accelerators, and custom peripherals in the Kintex-7 fabric. This arrangement supports long product lifecycles and field-updatable functionality. A robust design should partition interfaces cleanly between processor and programmable logic, document shared-memory and interrupt behavior, and validate toolchain, boot configuration, debug access, and peripheral assignments for the selected device variant.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7Z030-1SBG485C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7Z030-L2SBG485I | XC7Z030-1SBG485I | XC7Z030-2SBG485I | XC7Z030-1FBG484I | XC7Z030-2FBG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-FCBGA (19x19 mm) | 484-FCBGA (19x19 mm) | 484-FCBGA (19x19 mm) | 484-FCBGA (19x19 mm) | 484-FCBGA (19x19 mm) | 484-FCBGA (19x19 mm) |
| Processor Core | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz | 800 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| FPGA Logic Cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells |
| Speed Grade | -1 | -2 | -1 | -2 | -1 | -2 |
| Programmable Logic Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
| Temperature-Grade Suffix | C | I | I | I | I | I |
Principais diferenciais
- Balanced Zynq integration with 125K logic cells (vs XC7Z030-1FBG484I)
- Nominal 667 MHz processor operating point (vs XC7Z030-L2SBG485I)
- Documented 130-I/O integration (vs XC7Z030-1FBG484I)
Notas de projeto
Use the AMD XC7Z30-SBG485 package-placement diagram as the controlling ball-map reference during schematic and PCB layout. Confirm every power, ground, configuration, clock, and user I/O assignment against the exact XC7Z030-1SBG485C ordering code. Treat the 484-FCBGA as a fine-pitch assembly: define pad and solder-mask geometry using AMD PCB guidelines, provide adequate escape-routing layers, and conduct assembly and signal-integrity reviews before releasing the production design.
Plan the XC7Z030-1SBG485C as a multi-rail SoC and obtain the exact DC operating limits, supply-voltage tolerances, power-up sequence, and current limits from the DS191 data sheet. Place required bulk and high-frequency decoupling close to the relevant package balls, keep supply and ground paths low-impedance, and reserve measurement points for startup and steady-state verification. Sequence-dependent interfaces must be checked so that external devices are never driven beyond their permitted voltage during power transitions.
The XC7Z030-1SBG485C combines processor and programmable-logic activity in one high-power FCBGA package, so board construction directly affects junction temperature and long-term reliability. Use the package thermal data and power estimates from AMD to establish a worst-case dissipation budget. Provide uninterrupted top and inner copper planes, evaluate thermal vias beneath the device, model the assembled board in its enclosure, and verify temperature rise during maximum processor and logic utilization rather than relying only on an idle-board measurement.
Do not approve a replacement based only on the 484-ball count, nominal processor frequency, or a similar XC7Z030 family name. The SBG485 and FBG484 package codes require exact ball-map and outline verification, while -1 and -2 speed grades can change timing and power behavior. Industrial I suffixes also require temperature-grade review. Before substitution, compare the ordering-code tables, package drawings, power specifications, and configuration requirements, then repeat hardware and software validation on the revised design.
Informações de conformidade
Compliance status was not stated in the cited product listings or device data excerpt and must be confirmed for the exact ordering code.