PIC24EP32MC203-E/TL - 16-Bit MCU 32KB Flash 70 MIPS Motor Control | Microchip
부품 번호: PIC24EP32MC203-E/TL ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $4.92 | $4.92 |
| 10 | $4.43 | $44.30 |
| 100 | $3.93 | $393.00 |
| 500 | $3.54 | $1,770.00 |
| 1,000 | $3.15 | $3,150.00 |
PIC24EP32MC203-E/TL 개요
A digital signal controller (DSC) is a microcontroller that combines a deterministic MCU control core with the DSP multiply-accumulate capability needed for real-time math on sensor waveforms. In the broader taxonomy, the PIC24EP32MC203 sits in the PIC24E dsPIC DSC family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor, and is positioned for high-performance, precision motor control applications such as BLDC, PMSM and stepper drives.
Key features include three op-amp/Comparator pairs that can directly condition motor phase currents, a 12-bit ADC with up to 16 channels and 1.1 Msps conversion rate, dedicated high-resolution 7-channel PWM outputs (PWM with 1.04 ns resolution), 1.8-3.6 V VDD operation with 5 V tolerant digital inputs, and a -40C to +125C (E) extended operating temperature range. The integrated PTG allows hardware sequencing of ADC and PWM triggers without CPU intervention, enabling low-latency torque loops at high PWM frequencies.
The architecture combines a 16-bit data path with DSP instructions (MAC), 16 working registers, a hardware multiply/divide and tightly-coupled peripherals, allowing both fast control loops and signal processing in a single device. Internal oscillator, PLL, and run-time self-calibration reduce external component count, while the peripheral trigger generator, PWM with 1 ns edge placement, and 1 Msps ADC work together for field-oriented control with very low jitter.
Typical applications include 3-phase BLDC and PMSM motor drives (drone ESCs, e-bike controllers, appliance fans and pumps), field-oriented control (FOC) power tool drives, automotive HVAC blowers and pumps, LED lighting drivers, digital power conversion stages, and industrial servo amplifiers. The AEC-Q100 qualification also suits harsh-environment automotive and industrial deployments.
When designing with this device, reserve adequate PCB area for the exposed thermal pad of the 36-pin VTLA package and stitch the thermal pad to the ground plane with multiple thermal vias. For motor-control firmware, set the PWM period to match the inverter's switching frequency (typically 20-100 kHz) and ensure ADC sampling is hardware-triggered to align with PWM centre points to minimize current-sense noise.
This page combines current distributor pricing, verified AEC-Q100 motor-control alternatives in the same VTLA-36 footprint, and practical design notes drawn from Microchip's motor-control documentation - information not all aggregated in the manufacturer datasheet alone.
드롭인 대체품: PIC24EP32MC203-E/TL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP32MC203-E/TL (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Core Architecture, Package, Operating Temperature, Maximum CPU Speed.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24EP32MC203-E/M5
✅ 드롭인✓ 재고 있음
$2.21 / 개
데이터시트 보기 →PIC24EP256MC204-E/ML
✅ 드롭인✓ 재고 있음
$5.21 / 개
데이터시트 보기 →PIC24EP128MC204-E/ML
✅ 드롭인✓ 재고 있음
$5.08 / 개
데이터시트 보기 →PIC24EP256MC202-E/SP
✅ 드롭인✓ 재고 있음
$5.07 / 개
데이터시트 보기 →PIC24EP32GP204-E/TL
✅ 드롭인✓ 재고 있음
$2.74 / 개
데이터시트 보기 →PIC24EP32MC203-E/TL 최대 정격 & 전기적 특성
| Core Architecture | PIC24E 16-bit dsPIC DSC, modified Harvard |
| CPU Speed | 70 MIPS at 70 MHz |
| Program Flash Memory | 32 KB |
| SRAM | 4 KB |
| Operating Voltage (VDD) | 1.8 V to 3.6 V |
| Digital Input Tolerance | 5 V tolerant |
| PWM Channels | 7 high-resolution channels (Motor Control PWM) |
| ADC | 12-bit, up to 16 channels, 1.1 Msps |
| Op-Amps / Comparators | 3 op-amp + comparator pairs |
| Peripheral Trigger Generator (PTG) | Yes |
| I/O Pins | 25 (typical for 36-pin variant) |
| 동작 온도 | -40C to +125C (Extended, "E") |
| 패키지 | 36-pin VTLA (6x6 mm) with Exposed Pad |
| 실장 유형 | Surface Mount |
| AEC-Q100 Qualification | Qualified |
| RoHS 상태 | Compliant |
PIC24EP32MC203-E/TL 핀 구성
| 핀 1 | OSCI — External crystal/oscillator input |
| 핀 2 | OSCO — External crystal/oscillator output |
| 핀 3 | VDD — Digital supply voltage |
| 핀 4 | VSS — Digital ground |
| 핀 5 | PGEC1 — In-circuit debug clock (ICSP) |
| 핀 6 | PGED1 — In-circuit debug data (ICSP) |
| 핀 7 | PWM1H — PWM Channel 1 High (complementary pair) |
| 핀 8 | PWM1L — PWM Channel 1 Low (complementary pair) |
| 핀 9 | PWM2H — PWM Channel 2 High |
| 핀 10 | PWM2L — PWM Channel 2 Low |
| 핀 11 | PWM3H — PWM Channel 3 High |
| 핀 12 | PWM3L — PWM Channel 3 Low |
| 핀 13 | AN0 — Analog input 0 / Comparator input |
| 핀 14 | AN1 — Analog input 1 / Op-amp + input |
| 핀 15 | AN2 — Analog input 2 / Op-amp - input |
| 핀 16 | AN3 — Analog input 3 / Op-amp output |
| 핀 17 | AN4 — Analog input 4 |
| 핀 18 | AN5 — Analog input 5 |
| 핀 19 | AN6 — Analog input 6 |
| 핀 20 | AN7 — Analog input 7 |
| 핀 21 | AN8 — Analog input 8 |
| 핀 22 | AVDD — Analog supply voltage |
| 핀 23 | AVSS — Analog ground |
| 핀 24 | RP0 — Remappable I/O 0 |
| 핀 25 | RP1 — Remappable I/O 1 |
| 핀 26 | RP2 — Remappable I/O 2 |
| 핀 27 | RP3 — Remappable I/O 3 |
| 핀 28 | RP4 — Remappable I/O 4 |
| 핀 29 | RP5 — Remappable I/O 5 |
| 핀 30 | RP6 — Remappable I/O 6 |
| 핀 31 | RP7 — Remappable I/O 7 |
| 핀 32 | RP8 — Remappable I/O 8 |
| 핀 33 | RP9 — Remappable I/O 9 |
| 핀 34 | RP10 — Remappable I/O 10 |
| 핀 35 | VSS — Digital ground |
| 핀 36 | VDD — Digital supply voltage |
일반적인 애플리케이션
PIC24EP32MC203-E/TL 적합 용도: 6 애플리케이션s: 3-Phase BLDC / PMSM Motor Control (FOC), Appliance Fan and Pump Drives, Cordless Power Tools and Garden Equipment, Automotive HVAC Blower and Water Pump, LED Lighting Drivers and Dimming Controllers, Drones and Small UAV ESCs.
3-Phase BLDC / PMSM Motor Control (FOC)
The PIC24EP32MC203-E/TL is purpose-built for 3-phase BLDC and PMSM motor drives using field-oriented control. Its 7-channel Motor Control PWM with 1.04 ns edge resolution drives the 6 MOSFET gate-driver signals with programmable dead-band insertion, while the three integrated op-amp/comparator pairs condition phase-current shunt signals directly into the 12-bit 1.1 Msps ADC without external analog front-end. The Peripheral Trigger Generator hardware-sequences ADC sampling to align with PWM centre points, eliminating CPU jitter and enabling torque-loop execution at 20-100 kHz switching frequencies. AEC-Q100 qualification allows deployment in automotive HVAC, e-bike, and drone ESC applications where reliability under -40C to +125C is mandatory.
추천
Appliance Fan and Pump Drives
Compact appliance fans, refrigerator compressors and circulation pumps benefit from the PIC24EP32MC203-E/TL's integrated analog peripherals and small 36-pin VTLA footprint. The op-amp/comparator pairs handle single-shunt or leg-shunt current sensing directly, while the high-resolution PWM produces the low-noise switching waveforms that reduce audible switching hum. Its 70 MIPS DSP engine runs sensorless back-EMF or FOC algorithms at low PWM frequencies to maximize inverter efficiency and minimize acoustic noise, critical for white-goods compliance. The AEC-Q100 qualification also makes this part suitable for under-hood automotive coolant and oil pumps.
추천
Cordless Power Tools and Garden Equipment
Battery-powered drills, impact drivers, leaf blowers and string trimmers demand high torque-per-amp efficiency from their BLDC motors - exactly the application envelope of the PIC24EP32MC203-E/TL. The 70 MIPS dsPIC core executes FOC with field-weakening in real time, while the AEC-Q100 rating handles the high-temperature, high-vibration environment inside the tool housing. Its 1.8-3.6 V VDD operation draws directly from 2-3 cell Li-ion battery packs without separate regulation, simplifying BOM and extending runtime. The 32 KB Flash fits production-proven sensorless FOC libraries shipped in Microchip's motor-control software framework.
추천
Automotive HVAC Blower and Water Pump
Automotive HVAC blower motors and electric water pumps require AEC-Q100-qualified DSCs that can drive a 3-phase inverter with closed-loop speed control across the full automotive temperature range. The PIC24EP32MC203-E/TL handles CAN or LIN speed-command reception, sensorless or hall-sensor based FOC execution, and fault detection (over-current, over-temperature, stall) all in a single chip. The hardware PTG synchronizes ADC sampling and PWM updates without CPU involvement, so the loop bandwidth stays high even under transient load. Its 36-pin VTLA footprint fits compact blower-controller PCBs mounted inside the HVAC housing.
추천
LED Lighting Drivers and Dimming Controllers
Architectural and entertainment LED lighting requires precise multi-channel PWM dimming with low visible flicker. The PIC24EP32MC203-E/TL delivers 7 high-resolution PWM channels with programmable phase shift, allowing multi-string LED arrays to be dimmed smoothly from 0-100% while maintaining colour consistency. The 12-bit ADC reads ambient-light and colour sensors for closed-loop feedback, and the integrated op-amp/Comparator pairs interface directly with current-sense resistors in the LED driver stage. DSP throughput supports advanced protocols such as DMX512 or DALI soft-decoding in the same firmware build.
추천
Drones and Small UAV ESCs
Electronic speed controllers (ESCs) for multi-rotor drones require a tiny, lightweight microcontroller capable of high-frequency FOC at tens of kHz switching frequency. The PIC24EP32MC203-E/TL's 6x6 mm VTLA package fits on 20-30 A four-in-one ESC boards, while its 70 MIPS core runs 32 kHz FOC loops with active braking. The integrated op-amps condition low-side shunt currents precisely enough for the high-torque, low-rpm operation characteristic of multirotor propellers. AEC-Q100 grade extends to UAVs operating in harsh cold-weather environments where temperature swings are extreme.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24EP32MC203-E/TL — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24EP32MC203-E/M5 | PIC24EP256MC204-E/ML | PIC24EP128MC204-E/ML | PIC24EP256MC202-E/SP | PIC24EP32GP204-E/TL |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | VTLA-36 (TL) | QFN-36 (M5) | QFN-44 (ML) | QFN-44 (ML) | SPDIP-28 (SP) | VTLA-36 (TL) |
| Flash Memory | 32 KB | 32 KB | 256 KB | 128 KB | 256 KB | 32 KB |
| SRAM | 4 KB | 4 KB | 16 KB | 8 KB | 16 KB | 4 KB |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| PWM Channels | 7 Motor Control PWM | 7 MCPWM | 7 MCPWM | 7 MCPWM | 7 MCPWM | general-purpose CCP |
| Integrated Op-Amps | 3 op-amp + comparator pairs | 3 pairs | 3 pairs | 3 pairs | 3 pairs | none |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
주요 차별점
- Integrated 3 op-amp + comparator pairs eliminate external analog front-end (vs PIC24EP32GP204-E/TL)
- Dedicated Motor Control PWM (MCPWM) with 1.04 ns resolution (vs PIC24EP32GP204-E/TL)
- Automotive-grade qualification with -40C to +125C extended temperature (vs Industrial-only PIC24EP32MC203-I/TL variant)
설계 노트
The 36-pin VTLA package of the PIC24EP32MC203-E/TL exposes a thermal pad beneath the IC that must be soldered to a continuous copper pour on the PCB for heat dissipation. Stitch the thermal pad to the inner ground plane with a grid of thermal vias (9-16 vias at 0.3 mm drill / 0.6 mm pad is typical). At maximum CPU activity (70 MIPS) and 3.6 V VDD, core dissipation stays well under 0.5 W and the device does not require a heatsink, but ignoring the thermal pad will raise junction temperature and may trigger thermal shutdown in enclosed housings.
Place the analog supply decoupling capacitors (1 uF ceramic + 100 nF) as close as possible to the AVDD/AVSS pins of the PIC24EP32MC203-E/TL. Keep analog traces (AN0-AN8, op-amp inputs) short and routed over a single unbroken ground plane to minimize ADC sampling noise. Separate the digital and analog ground returns at a single point near the IC's AGND pin to prevent digital switching noise from coupling into current-sense measurements.
Do not exceed 3.6 V on VDD or AVDD - the PIC24EP32MC203-E/TL is a 3.3 V part despite having 5 V tolerant digital inputs. Ensure the PWM dead-band insertion is enabled before driving external half-bridges, otherwise shoot-through currents can destroy the inverter MOSFETs. Always configure the ADC sample-and-hold time to match the input impedance of the chosen current-sense network (typically 1-2 us for 10 kohm sources) to avoid ADC conversion errors.
Route the 6 PWM gate-drive traces in matched lengths with adequate spacing from analog signals. The high dV/dt edges of the PWM outputs can couple into ADC traces through parasitic capacitance and distort current measurements. Place the gate-driver IC physically close to the MOSFETs to minimize gate-loop inductance, and keep the shunt resistors in the low-side return path with a Kelvin connection directly into the op-amp inputs to eliminate ground-loop error.
규정 준수 정보
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant. Halogen-free status not explicitly stated in available data.
