집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

EP20K600EFI672-2X - APEX-20KE 600K Gates FPGA, 672-BGA | Intel
EP20K600EFI672-2X

EP20K600EFI672-2X - APEX-20KE 600K Gates FPGA, 672-BGA | Intel

The Intel (formerly Altera) EP20K600EFI672-2X is an APEX-20KE family Field Programmable Gate Array (FPGA) that integrates 600,000 gates, 24,320 logic cells, and 311,296 bits of embedded memory into a single high-density device. Housed in a 672-ball Fine-pitch BGA (FC-FBGA) package, it operates from a 1.8 V core supply and supports up to 508 user I/O pins at 200 MHz internal performance, making it suitable for system-on-a-programmable-chip (SOPC) designs that combine high-density logic with on-chip memory and product-term arrays. An FPGA is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and embedded memory blocks that can be reconfigured after manufacturing to implement arbitrary digital circuits. APEX-20KE belongs to the APEX-20K product family hierarchy: APEX-20K series -> MultiCore architecture -> embedded system blocks (ESBs) -> programmable logic device (PLD) -> FPGA -> programmable logic IC. ESBs provide dual-port RAM, ROM, and product-term logic, enabling designers to mix synchronous and asynchronous functions on the same die while keeping the architecture coherent with surrounding Altera/Intel toolchains. Key features of the EP20K600EFI672-2X include the MultiCore architecture that pairs Look-Up Table (LUT)-based logic with ESBs, 311,296 bits of embedded SRAM, 508 maximum user I/O pins, in-system programmability through IEEE 1149.1 JTAG, and operation over the industrial 0 to 85 C ambient temperature range. The -2X speed grade and -2 designation indicate the part is the fastest commercially specified APEX-20KE device in its package family. The 45 x 45 mm, 1.27 mm-pitch FC-FBGA package supports dense board layouts while maintaining signal integrity for high-speed parallel interfaces such as PCI, LVDS, and SDRAM controllers. From an architectural standpoint, the EP20K600EFI672-2X uses 0.15-micron all-layer copper interconnect CMOS fabrication on a 1.8 V core, delivering up to 35 percent higher performance than the original APEX 20K series. The MultiCore structure combines MegaLAB columns of Logic Array Blocks (LABs) with Embedded System Blocks (ESBs), giving designers access to distributed RAM, content-addressable memory, and product-term logic in a unified fabric. Each ESB can be configured as dual-port RAM, single-port RAM, ROM, or CAM, providing flexible on-chip storage for FIFO buffers, register files, and lookup tables. Typical applications include telecommunication line cards, high-speed data acquisition systems, ASIC prototyping, industrial control and factory automation, networking and storage controllers, and digital signal processing front-ends. The 508 I/O count accommodates wide parallel buses and multiple LVDS channels needed in image processing and test equipment. When designing with this part, confirm that the APEX-20KE device family is supported in your version of the Quartus II or MAX+PLUS II design software. The 672-ball FC-FBGA requires precise reflow profiling and X-ray inspection of solder joints. Signal-integrity simulations are recommended for LVDS and DDR-style interfaces above 100 MHz. This page aggregates distributor pricing, drop-in alternative MPNs, and practical design notes beyond the manufacturer datasheet summary, providing engineers with a single reference for sourcing and validation.

견적 요청 문의하기
EP20K60EBC356-2 - APEX 20KE 60K Gate FPGA, 196 I/O, BGA-356 | Intel / Altera
EP20K60EBC356-2

EP20K60EBC356-2 - APEX 20KE 60K Gate FPGA, 196 I/O, BGA-356 | Intel / Altera

The Intel (formerly Altera) EP20K60EBC356-2 is a member of the APEX-20KE family of Field Programmable Gate Arrays (FPGAs), delivering up to 60,000 typical gates (logic elements) and 196 user I/Os in a 356-ball LBGA package. According to the manufacturer datasheet, the device features a 1.72 ns propagation delay, an internal operating frequency up to 160 MHz, and is built on a CMOS MultiCore architecture that combines look-up table (LUT)-based logic with embedded memory blocks. The 356-LBGA package variant is part of the broader APEX-20KE BGA family. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic. FPGAs sit within the programmable logic device (PLD) hierarchy - alongside CPLDs - and are positioned above fixed-function ASICs only in terms of flexibility, not raw performance per watt. The APEX-20KE family, in particular, pioneered system-on-a-programmable-chip (SOPC) integration by combining logic, memory, and I/O elements on a single die, enabling glue-logic replacement, custom datapath implementation, and high-throughput interface bridging. Key differentiating features of the EP20K60EBC356-2 include 60,000 typical gates, 196 user I/O pins, the speed grade -2 designation (a moderate-speed bin suitable for general-purpose designs), and a 1.72 ns pin-to-pin propagation delay. The device supports in-system programmability through the IEEE 1149.1 (JTAG) interface and is supported by the Quartus design toolchain (legacy versions compatible with APEX 20KE include Quartus II and MAX+PLUS II). Operating temperature range is 0 C to 85 C (commercial grade). From an architectural standpoint, the APEX-20KE MultiCore structure pairs Logic Array Blocks (LABs) with Embedded System Blocks (ESBs) that double as dual-port RAM or ROM, allowing designers to place small FIFOs, register files, or constant tables without consuming general-purpose logic. The 196 I/O pins are distributed across multiple I/O banks with support for multiple I/O standards (LVTTL, LVCMOS, PCI), and each I/O cell contains registers for input, output, and output-enable paths. Typical applications for the EP20K60EBC356-2 include telecommunications line-card glue logic, industrial control backplanes, custom peripheral bridges for PCI/CompactPCI designs, legacy DSP pre/post-processing, and protocol converter ASICs. The -2 speed grade and 160 MHz internal frequency make the device suitable for control-plane rather than high-speed datapath designs. When designing with this FPGA, ensure your PCB has adequate decoupling: at least one 0.1 uF ceramic capacitor per VCC pin group plus bulk decoupling on each of the VCCINT and VCCIO rails. A JTAG header with TMS, TCK, TDI, TDO, and TRST (optional) is required for in-system configuration and boundary-scan test. Because this part is mature and nearing end-of-life, designers should plan a long-term component-availability strategy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
EP20K60EBC356-3 - 60K Gate APEX 20K FPGA, 356-BGA | Intel (Altera)
EP20K60EBC356-3

EP20K60EBC356-3 - 60K Gate APEX 20K FPGA, 356-BGA | Intel (Altera)

The Intel (formerly Altera) EP20K60EBC356-3 is a member of the APEX 20K family of Field-Programmable Gate Arrays (FPGAs) featuring 60,000 typical gates, 2,560 logic elements, and 196 user I/Os in a 356-ball BGA package. Speed grade -3 places this device in the standard-performance tier with internal frequency support up to 160 MHz and a propagation delay of approximately 1.72 ns per logic element. The device operates from a 1.8 V core supply and is rated for the commercial 0C to 85C temperature range. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device that allows engineers to configure digital logic blocks, interconnect, and I/O behavior after manufacture. The APEX 20K family pioneered the MultiCore architecture, which integrates look-up tables (LUTs), embedded system blocks (ESBs) for memory and specialized functions, and a system-on-a-programmable-chip (SOPC) framework - effectively combining FPGA fabric with dedicated memory and I/O resources on a single die. Key features of the EP20K60EBC356-3 include its 256 macro cells, 196 user I/Os, 160 MHz internal frequency, 1.72 ns propagation delay, and CMOS logic family implementation on a 0.22 um process. The 356-ball BGA (LBGA) package exposes both high-speed I/O banks and dedicated configuration/JTAG pins for in-system programmability via the Altera ByteBlaster or comparable download cables. Architecturally, the APEX 20K family employs a hierarchical row/column interconnect fabric feeding LUT-based logic elements (LEs) and ESB blocks that can be configured as SRAM, ROM, or specialized logic such as CAM. The MultiCore architecture was an early example of heterogeneous FPGA fabric, allowing designers to instantiate large blocks of memory alongside gate-rich logic for DSP, glue logic, and bus-interface functions on the same silicon. Typical applications for the EP20K60EBC356-3 include telecom line-card glue logic, industrial control and data acquisition front-ends, PCI/ISA bus bridging, and prototyping platforms for ASIC emulation. The device is also suitable for legacy systems that originally specified the APEX 20K family when it launched, including custom peripheral controllers and image-processing pipelines that fit within its 60K-gate capacity. When designing with this part, confirm JTAG chain ordering and configuration mode (PS vs. AS, or JTAG) match your existing board layout, since the 356-BGA footprint leaves little room for rework. Engineers migrating to newer Intel Cyclone or MAX families should treat the EP20K60EBC356-3 as a long-term support component rather than a new design-in candidate. This page synthesizes distributor pricing, same-brand drop-in alternatives from the APEX 20K family, and practical design notes not consolidated on any single manufacturer page.

견적 요청 문의하기
EP20K60EFC144-1 - APEX 20KE FPGA 60K Gates 144-FBGA | Altera
EP20K60EFC144-1

EP20K60EFC144-1 - APEX 20KE FPGA 60K Gates 144-FBGA | Altera

The Altera EP20K60EFC144-1 is an APEX 20KE family field-programmable gate array (FPGA) delivering approximately 60,000 typical gates (256,000 system gates max) with 93 user I/Os in a 144-ball fine-pitch BGA (FBGA) package. The -1 speed grade and commercial temperature grade (0 C to 85 C) target mainstream logic integration in telecom, networking, and DSP glue applications. The device operates at a maximum internal frequency of 160 MHz with a 1.72 ns propagation delay. An FPGA (field-programmable gate array) is a semiconductor integrated circuit composed of an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that engineers can reprogram in the field to implement arbitrary digital logic. FPGAs sit above ASICs and CPLDs in the programmable logic hierarchy and are widely used for parallel DSP, custom interface bridging, and pre-silicon prototyping. The APEX 20KE family specifically introduced MultiCore architecture combining look-up tables (LUTs) with embedded product-term blocks and ESBs (embedded system blocks) for memory. Key features of the EP20K60EFC144-1 include 256 macrocells, 32,768 bits of embedded memory (2560 RAM blocks), 196 maximum user I/Os, and a CMOS process core running on 1.8 V core supply with multi-voltage I/O support. The 144-FBGA package provides a small 13 mm x 13 mm footprint suitable for high-density PCB designs. The device supports in-system programmability via JTAG and the Altera Altera Programming Unit (APU) or ByteBlaster interface. Architecturally, the EP20K60EFC144-1 uses Altera's MultiCore structure integrating fine-grained LUTs for datapath logic with coarse-grained product-term blocks for control and state machines. The embedded system blocks (ESBs) provide dual-port RAM, ROM, and CAM (content-addressable memory) functions. The four-phase PLL (where fitted) and distributed clock network support synchronous designs up to 160 MHz internally, while LVTTL, LVCMOS, PCI, and other I/O standards are selectable per pin via software. Typical applications include telecommunications line-card glue logic, networking datapath and packet processing, DSP coprocessor front-ends, custom peripheral bridging in embedded systems, and ASIC prototyping. The 144-FBGA footprint suits space-constrained boards where 60K-gate logic density is required. When designing with this part, ensure your PCB can route 144 BGA balls on the chosen land pattern (typically 1.0 mm pitch). Provide clean 1.8 V core and 3.3 V/2.5 V I/O supply rails with bulk decoupling near the package. Use the Quartus II design tool (or legacy MAX+PLUS II for legacy designs) for place-and-route, and verify timing closure at the -1 speed grade against your target fMAX. This page synthesizes distributor pricing, drop-in same-brand alternatives, application pairings, and practical design notes not found in the standalone datasheet PDF - giving procurement and design engineers a faster path from datasheet to qualified BOM.

견적 요청 문의하기
EP20K60EFC144-2 - APEX-20K FPGA, 60K Gates, 144-LQFP | Altera
EP20K60EFC144-2

EP20K60EFC144-2 - APEX-20K FPGA, 60K Gates, 144-LQFP | Altera

The Altera EP20K60EFC144-2 is a member of the APEX-20K family of Field Programmable Gate Arrays (FPGAs), delivering 60,000 typical gates, 32,768 RAM bits, and 2,560 logic elements in a 144-pin LQFP (Low-profile Quad Flat Pack) package. Built on a 0.18 µm CMOS process, the device operates from a 1.71 V to 1.89 V core supply and supports internal frequencies up to 160 MHz with a propagation delay of approximately 1.72 ns, making it suitable for high-performance DSP, communications, and embedded control designs. The MultiCore™ architecture integrates Look-Up Table (LUT) logic, Embedded System Blocks (ESBs) for memory, and FastTrack interconnect for predictable timing closure. An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that allows engineers to implement custom digital circuits by configuring an array of logic blocks, memory blocks, and routing resources after manufacturing. FPGAs sit within the broader hierarchy: FPGA -> programmable logic -> digital IC -> semiconductor. Unlike fixed-function ASICs, FPGAs can be re-programmed in the field, enabling rapid prototyping, design iteration, and long lifecycle support for industrial, aerospace, and defense applications where standard microcontrollers lack the necessary parallel processing bandwidth. Key features of the EP20K60EFC144-2 include 92 user I/O pins (with some sources citing 93), up to 2560 logic elements, dedicated hardware multipliers for DSP arithmetic, JTAG-based IEEE 1149.1 boundary-scan support, and embedded memory blocks that can be configured as RAM, ROM, or FIFO. The device supports multiple I/O standards including LVTTL, LVCMOS, PCI, and GTL+, allowing direct interfacing with microprocessors, memories, and bus architectures commonly found in legacy telecom and industrial systems. The APEX-20K architecture combines a four-input LUT-based logic array with embedded system blocks that provide up to 32,768 bits of true dual-port RAM, and a hierarchical routing fabric (FastTrack) that delivers deterministic interconnect delays. The 'E' suffix denotes the enhanced 1.8 V core voltage variant, while the '2' speed grade corresponds to a specific timing bin that targets industrial-grade performance envelopes. Designers use the Quartus development environment for synthesis, place-and-route, and timing analysis. Typical applications include telecommunications infrastructure (line cards, multiplexing, protocol bridging), industrial automation controllers, DSP co-processing, motor control, and legacy replacement for older discrete-logic or ASIC designs. The 144-LQFP package offers a low-profile, surface-mount footprint suitable for production volumes where BGA assembly cost or inspection capability is constrained. When designing with the EP20K60EFC144-2, ensure that all configuration pins (nCONFIG, nSTATUS, CONF_DONE, DCLK) are properly pulled per the Altera configuration handbook, and provide adequate decoupling (typically 0.1 µF + 10 µF bulk) within 5 mm of each supply pin. The non-volatile configuration memory (EPC) companion device or JTAG programming must be planned early, as the device requires external configuration data at every power-up. This page synthesizes distributor stock and pricing snapshots, drop-in APEX-20K package alternatives, and practical Quartus design notes that go beyond the manufacturer datasheet's specification tables alone.

견적 요청 문의하기
EP20K60EFC144-2X - 60K APEX-20KE FPGA, 93 I/O, 144-BGA | Altera
EP20K60EFC144-2X

EP20K60EFC144-2X - 60K APEX-20KE FPGA, 93 I/O, 144-BGA | Altera

The Altera (Intel Programmable Solutions Group) EP20K60EFC144-2X is a member of the APEX-20KE family of Field Programmable Gate Arrays (FPGAs) delivering 60,000 typical gates with 2,560 logic elements (LEs) and 32,768 bits of embedded RAM. Housed in a 144-pin FineLine BGA (FBGA) package measuring 13x13 mm, the device exposes 93 user I/Os and is fabricated on a 0.22 µm CMOS process node optimized for 1.8 V core operation. The "FC" package suffix denotes the FBGA form factor, while the trailing "-2X" speed grade corresponds to the faster commercial temperature device in the APEX-20KE performance bin. An APEX-20KE device is a second-generation APEX (Advanced Programmable Element eXtension) FPGA that combines look-up table (LUT)-based logic elements with embedded MultiCore architecture, integrating Look-Up Table (LUT), Embedded System Block (ESB) memory, and product-term logic blocks on a single die. APEX-20KE sits inside the broader taxonomy of programmable logic devices: PLD → CPLD/FPGA → SRAM-based LUT FPGA → APEX family → APEX-20KE sub-family. The "E" suffix indicates the ESB-enhanced variant with up to 32,768 bits of dual-port RAM and CAM support, distinguishing it from the original APEX-20K family. Key features include 2,560 logic elements, 32,768 RAM bits, four Phase-Locked Loops (PLUs) for clock management, MultiVolt I/O support for interfacing with 1.8 V, 2.5 V, 3.3 V and 5.0 V buses, and on-chip boundary-scan (IEEE 1149.1 JTAG) for prototype bring-up. The architecture supports up to four clock networks with dedicated FastCLK inputs and eight low-skew global signals. ESB blocks provide true dual-port RAM, single-port RAM, ROM, and CAM, enabling high-bandwidth on-chip buffering. Typical applications include telecommunications line cards, industrial control and automation, custom glue logic bridging microprocessors to peripherals, and legacy system refresh of designs originally captured for APEX-20K. The 144-FBGA package is well suited to space-constrained boards where 93 user I/Os are sufficient for parallel datapaths, custom peripheral bridges, or protocol conversion. Designers retain full Quartus II / MAX+PLUS II tool compatibility and the Mbit Flash configuration support of the broader APEX family. When laying out the PCB, route the four PLL analog supplies (VCC_PLL) with isolated pours and a ferrite bead; switching noise on VCC_PLL directly degrades jitter performance. Place the 144-FBGA on a minimum 4-layer stack-up with continuous VCC and GND planes directly under the package, and follow the IBIS model for output impedance matching on the 93 user I/Os. This page synthesizes distributor stock, drop-in alternatives from the APEX-20KE family, and practical design notes not consolidated in the original APEX-20KE datasheet.

견적 요청 문의하기
EP20K60EFC144-2XN - APEX-20KE FPGA 60K Gates 93 I/O 144-BGA | Intel/Altera
EP20K60EFC144-2XN

EP20K60EFC144-2XN - APEX-20KE FPGA 60K Gates 93 I/O 144-BGA | Intel/Altera

The Intel (formerly Altera) EP20K60EFC144-2XN is a member of the APEX-20KE family of Field Programmable Gate Arrays (FPGAs), delivering up to 60,000 typical gates in a 144-ball Fine-pitch Ball Grid Array (FBGA) package. Per the manufacturer part numbering, the device integrates 2,560 logic elements (LEs), 32,768 bits of embedded memory, and 93 user I/O pins. It operates from a 1.71 V to 1.89 V core supply (VCCINT) and supports I/O banks that can be configured for multiple I/O standards, making it suitable for mixed-voltage system designs. What is an FPGA? A Field Programmable Gate Array is a type of programmable logic device (PLD) that contains an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells - all of which can be reconfigured after manufacturing to implement arbitrary digital logic. The APEX-20KE family specifically introduced MultiCore architecture combining look-up tables (LUTs), embedded system blocks (ESBs) for memory, and a high-bandwidth interconnect fabric. In the broader taxonomy, the EP20K60EFC144-2XN is a PLD -> programmable logic -> FPGA -> SRAM-based LUT FPGA -> system-on-a-programmable-chip (SOPC) device. Key features include 2,560 embedded array blocks / logic elements, 32,768 bits of embedded SRAM, 93 maximum user I/Os, and in-system programmability via an IEEE 1149.1 (JTAG) interface or the passive serial configuration scheme. The device supports a propagation delay in the nanosecond range and is specified for commercial temperature operation (0 C to 85 C TJ). The 144-FBGA package provides high I/O density in a small footprint suitable for space-constrained board designs. The APEX-20KE architecture combines logic, memory, and a high-speed interconnect, allowing designers to implement datapath, control logic, and on-chip RAM in a single device. The MultiCore architecture integrates MegaLAB structures that contain LABs (Logic Array Blocks), ESBs (Embedded System Blocks), and a local interconnect, with row/column interconnect resources enabling high fanout signal distribution. Typical applications for the EP20K60EFC144-2XN include telecommunications infrastructure (line cards, protocol bridges), industrial automation and motor control, glue logic and bus interfacing in legacy system upgrades, prototyping of ASIC designs, and embedded DSP front-ends. The combination of moderate gate count, embedded memory, and 93 I/O pins makes it appropriate for designs that exceed the capacity of CPLDs but do not require a modern high-density FPGA. When designing with this device, ensure that the configuration scheme (passive serial, JTAG, or parallel) is correctly selected to match the system boot requirements. The 144-FBGA package requires careful PCB layout with microvia or via-in-pad technology and controlled-impedance routing to maintain signal integrity on high-speed I/O. Note that the APEX-20KE family has been classified as a mature/legacy product by Altera/Intel - verify long-term availability before committing to new designs. This page synthesizes distributor pricing, drop-in same-package alternatives (including tape-and-reel and speed-grade variants of the same die), and practical design notes not found in the manufacturer datasheet alone, helping engineers sourcing or qualifying this legacy FPGA.

견적 요청 문의하기
EP20K60EFC324-1 - 60K APEX-20KE FPGA, 196 I/O, 324-FBGA | Altera
EP20K60EFC324-1

EP20K60EFC324-1 - 60K APEX-20KE FPGA, 196 I/O, 324-FBGA | Altera

The Altera (Intel) EP20K60EFC324-1 is a member of the APEX-20KE® family of Field Programmable Gate Arrays (FPGAs) housed in a 324-ball FineLine BGA (19x19 mm) package. The device integrates 60,000 typical gates and 2,560 logic elements with 32,768 bits of embedded memory, supporting up to 196 user I/O pins. According to distributor listings, the core is fabricated on a 0.22 µm process and operates from a 1.8 V supply (range 1.71 V to 1.89 V), with maximum core clock performance rated at 250 MHz. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and embedded memory blocks that can be rewired in the field to implement arbitrary digital logic. FPGAs sit within the broader hierarchy of programmable logic devices: FPGA -> programmable logic -> digital IC -> semiconductor. The APEX-20KE family is the enhanced (E-suffix) MultiCore™ architecture variant that combines look-up table (LUT)-based logic with embedded array blocks (EABs) for memory and arithmetic functions, allowing a single chip to host both glue logic and datapath/memory functions. Key features of the EP20K60EFC324-1 include 196 maximum user I/Os, 32,768 total RAM bits distributed across embedded array blocks, a 1.8 V core supply, and the compact 19x19 mm FBGA-324 package that is footprint-compatible across the APEX 20K E-series product family. The -1 speed grade offers the standard propagation delay tier for the family, suitable for general-purpose glue logic, datapath, and bus-interface applications operating up to 250 MHz. Technically, the APEX-20KE architecture combines fine-grained logic elements with MegaLAB™ structures that group multiple logic elements and EABs into a single high-speed interconnect domain, simplifying timing closure for wide datapath designs. The 1.8 V core supply reflects the migration to lower-voltage operation introduced in this enhanced family, reducing power consumption compared to the 2.5 V APEX-20K predecessors. Typical applications include telecommunications line cards, peripheral bus bridging (PCI to local bus), industrial control and factory automation, networking backplane glue logic, and legacy designs that were originally captured on the Quartus II 4.x/5.x toolchain. The 324-FBGA footprint also makes the part suitable for high-density adapter cards where 196 I/Os are needed without an excessively large board footprint. When designing with this part, note that the APEX 20KE family is supported by the legacy Quartus II design software and is no longer recommended for new designs - the family has been replaced by Cyclone and Stratix series FPGAs in current Intel FPGA roadmaps. Always verify long-term availability against your product lifecycle expectations before committing to new designs. This page synthesizes distributor pricing, drop-in alternatives drawn from the same APEX 20KE BGA-324 footprint family, and practical design notes not found in the manufacturer datasheet. Pricing is presented in USD and reflects observed distributor data as of 2026-09-08.

견적 요청 문의하기
EP20K60EFC324-1X - APEX 20KE 60K FPGA, 324-BGA, 196 I/O | Altera
EP20K60EFC324-1X

EP20K60EFC324-1X - APEX 20KE 60K FPGA, 324-BGA, 196 I/O | Altera

The Altera EP20K60EFC324-1X is a member of the APEX 20KE family of SRAM-based FPGAs delivering 60,000 typical gates with 2,560 logic elements (LEs) housed in a 324-ball FineLine BGA (19x19 mm) package. The device provides 196 user I/O pins, 32,768 bits of embedded RAM, and operates on a 1.8 V core supply (VCCINT 1.71 V to 1.89 V). The -1 speed grade targets internal frequencies up to 250 MHz in the APEX 20K architecture. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs / LEs) interconnected by a programmable routing fabric. APEX 20KE devices belong to the broader category of programmable logic devices (PLDs), which sit between standard microcontrollers (fixed-function, sequential execution) and ASICs (custom-mask, high-NRE). Within the system hierarchy, APEX 20KE FPGAs occupy the high-density, high-I/O niche used for bus interfacing, protocol bridging, and parallel DSP pre-processing. Key features include MultiCore architecture merging Look-Up Table (LUT) logic with embedded system blocks (ESBs) that double as RAM or product-term logic, four phase-locked loops (PLLs) for clock management, support for LVTTL, LVCMOS, PCI, SSTL-2/3, HSTL, and GTL+ I/O standards, and in-system programmability via IEEE 1532 / passive serial / passive parallel modes. The 19x19 mm 324-FBGA package offers a 1.0 mm ball pitch suitable for high-density multi-layer PCBs. Designed on a 0.22 µm CMOS process with five layers of metal interconnect, the APEX 20KE delivers high logic density and predictable timing closure via the Quartus II design environment. The LUT-based ESBs allow distributed dual-port RAM, FIFO buffers, and content-addressable memory blocks to be inferred directly from HDL. Typical applications include telecommunications backplane interfacing, ATM cell processing, high-speed data-path glue logic, and PCI bus bridging. The 60K-gate density makes it suitable for mid-range ASIC prototyping and DSP co-processing front-ends. The 1.8 V VCCINT and 1.5 V / 1.8 V / 2.5 V / 3.3 V VCCIO rails are typical for the generation. Design consideration: APEX 20KE devices require proper power-up sequencing (VCCINT before VCCIO, or simultaneous with monotonic ramp) and configuration-via-jtag or EPC configuration device; ensure decoupling with 0.1 µF and 10 µF capacitors within 100 mil of every supply pin. The 324-BGA footprint demands 4-layer or higher PCB stack-up for signal-integrity-preserving escape routing. This page synthesizes distributor pricing, drop-in compatible variants, and practical design guidance not consolidated in the original datasheet.

견적 요청 문의하기
EP20K60EFC324-2 - APEX-20KE 60K FPGA 324-BGA | Altera / Intel
EP20K60EFC324-2

EP20K60EFC324-2 - APEX-20KE 60K FPGA 324-BGA | Altera / Intel

The Intel (formerly Altera) EP20K60EFC324-2 is a member of the APEX-20KE family of Field-Programmable Gate Arrays (FPGAs), integrating 162,000 gates, 2,560 logic elements, 32,768 RAM bits, and 196 user I/Os into a 324-ball FineLine BGA (324-FBGA, 19x19 mm) package. It operates from a single 1.71 V to 1.89 V core supply and is rated for the commercial temperature range of 0 C to 85 C, with internal frequency support up to 160 MHz and propagation delay around 1.72-2.41 ns depending on the speed path. An FPGA is a programmable logic device (PLD) that combines the flexibility of software-configurable logic with the performance of dedicated silicon. It sits at the top of the programmable logic hierarchy: PLD -> CPLD -> FPGA -> SoC FPGA. APEX-20KE introduced MultiCore architecture integrating look-up tables, product-term logic, and embedded memory on a single die, enabling the industry's first true system-on-a-programmable-chip (SOPC) integration at the time of launch. Key features include 196 user I/Os, 256 LABs/CLBs, 32 Kb of distributed RAM, hot-socketing support, MultiVolt I/O for interfacing across mixed-voltage rails, and Altera's Quartus design flow compatibility. The -2 speed grade places it in the mid-band of APEX-20KE, balancing timing margin against cost. The device is built on a 0.18 um CMOS process with multi-layer routing and embedded array blocks (EABs) used for memory, DSP-style operations, and wide fan-in functions. The high gate count and embedded block memory make it suitable for bus bridging, glue logic consolidation, and protocol offload rather than high-end DSP or GPU workloads. Typical applications include industrial control and factory automation backplanes, telecom line-card glue logic, military/aerospace control subsystems, legacy PCI/PCI-X bridges, and embedded control systems where moderate logic density and 196 I/Os are required. The 324-FBGA package supports high-density board layouts. When designing with EP20K60EFC324-2, account for its legacy 1.8 V core supply and ensure the host PCB supports JTAG configuration via the dedicated configuration pins. The part is now in mature / last-time-buy territory - confirm lifecycle status before committing to new designs. This page synthesizes distributor pricing from Heisener, Rochester Electronics and Octopart, drop-in alternatives within the APEX-20KE family, and practical design notes not consolidated in the original datasheet.

견적 요청 문의하기
EP20K60EFC324-2N - APEX-20KE FPGA, 60K Gates, 324-BGA | Altera
EP20K60EFC324-2N

EP20K60EFC324-2N - APEX-20KE FPGA, 60K Gates, 324-BGA | Altera

The Altera EP20K60EFC324-2N is a member of Intel's APEX-20KE Field Programmable Gate Array (FPGA) family, providing 60,000 system gates, 2,560 logic elements, and 196 user I/Os in a 324-pin FineLine BGA package (19x19 mm). Operating at a core voltage of 1.8 V (1.71 V to 1.89 V), this device delivers up to 200 MHz internal performance and is built on a 0.22 µm CMOS process with MultiCore architecture combining logic, embedded memory, and high-speed I/O in a single SOPC (System-on-a-Programmable-Chip) fabric. What is an FPGA? An FPGA (Field Programmable Gate Array) is a type of integrated circuit containing an array of programmable logic blocks, interconnect, and I/O cells that the designer configures after manufacturing. FPGAs sit in the broader hierarchy: programmable logic device (PLD) -> FPGA -> SOPC integration platform. The APEX-20KE family pioneered MultiCore architecture, integrating look-up tables (LUTs), embedded system blocks (ESBs) for memory, and product-term blocks into one fabric. Key features of the EP20K60EFC324-2N include 32,768 total RAM bits distributed across embedded system blocks, 196 maximum user I/Os supporting multiple I/O standards (LVTTL, LVCMOS, PCI, GTL+, HSTL, SSTL), and 32,768 system gates for high-density logic integration. The device supports in-system programmability via IEEE 1149.1 JTAG and Altera's passive serial configuration scheme, allowing rapid design iteration without removing the device from the board. The EP20K60EFC324-2N uses a fine-grain MultiCore architecture where each logic element (LE) combines a 4-input LUT, a programmable register, and carry/chain logic. The 32 Kbits of embedded memory can be configured as RAM, ROM, or FIFO, eliminating external memory in many glue-logic applications. The 1.8 V core reduces dynamic power compared with older 5 V and 3.3 V APEX predecessors, while 3.3 V tolerant I/O banks allow direct interface to legacy buses. Typical applications for this part include telecommunications line cards, industrial control and factory automation, military and aerospace prototyping, ASIC prototyping, glue-logic replacement, and high-speed parallel DSP pre/post-processing. The wide I/O count (196) and ample memory (32 Kbits) make it suitable for data-path bridging and protocol conversion designs. The 324-BGA package supports high-density board layouts with controlled-impedance signal routing. Designers should plan power sequencing for the 1.8 V core (use a low-dropout regulator with 3 A headroom), provide bulk decoupling on each VCCINT/VCCIO pin, and follow Altera's application note AN116 (configuration hardware) for JTAG chain and passive serial mode. The device operates commercially from 0 °C to 85 °C TJ, so thermal management is typically passive with copper pours. This page synthesizes distributor pricing, drop-in same-package alternatives from the APEX-20K and APEX-20KE families, and practical design notes not found in the standalone datasheet, helping engineers shorten the part-selection and BOM-qualification cycle for legacy Altera FPGA designs.

견적 요청 문의하기
EP20K60EFC324-2X - APEX-20KE FPGA 60K LE 324-FBGA | Intel
EP20K60EFC324-2X

EP20K60EFC324-2X - APEX-20KE FPGA 60K LE 324-FBGA | Intel

The Intel (Altera) EP20K60EFC324-2X is a member of the APEX-20KE family of Field Programmable Gate Arrays (FPGAs), delivering up to 60,000 typical gates (logic elements) and 32,768 RAM bits in a 324-ball Fine-pitch Ball Grid Array (FBGA) measuring 19 mm × 19 mm. It operates from a 1.71 V to 1.89 V core supply and provides 196 user I/O pins with 2,560 logic elements, supporting data rates up to 311 Mbps with LVDS or 622 Mbps with high-speed I/O. What is an FPGA? A Field Programmable Gate Array (FPGA) is a reconfigurable semiconductor device composed of an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated I/O elements, sitting between Application-Specific Integrated Circuits (ASICs) and general-purpose microcontrollers in the digital logic hierarchy (FPGA → programmable logic device → logic IC → integrated circuit → semiconductor). The APEX-20KE family adds embedded system blocks (ESBs) for dual-port RAM, FIFO, and CAM functions. The EP20K60EFC324-2X integrates 16 Embedded System Blocks for memory functions, four phase-locked loops (PLLs) for clock management, and supports MultiVolt I/O (1.5 V, 1.8 V, 2.5 V, 3.3 V) for direct interfacing with mixed-voltage logic families. It features in-system programmability via IEEE 1149.1 (JTAG) and supports configuration via passive serial, passive parallel asynchronous, and passive parallel synchronous modes using the Altera Quartus / MAX+PLUS II tool chain. The device architecture combines a fine-grained Look-Up Table (LUT)-based logic fabric with high-density memory blocks, enabling high-throughput datapath and DSP applications. The four PLLs provide flexible clock synthesis, frequency multiplication, and skew management, critical for synchronous designs operating across multiple clock domains. Typical applications include telecommunications infrastructure (SONET/SDH framer, ATM switching), high-speed serial protocol bridging, data acquisition systems with embedded FIFO buffering, and industrial control platforms with custom parallel interfaces. The 19×19 mm FBGA-324 footprint is suitable for moderate-density boards. When designing with this device, observe the 1.8 V (±5 %) core supply tolerance and place at least 8 decoupling capacitors (0.1 µF and 10 µF) around the periphery. JTAG pins should be pulled appropriately for reliable in-system programming. This page synthesizes current distributor inventory, drop-in alternatives, and engineering design notes that go beyond the manufacturer datasheet to support sourcing and board-level integration.

견적 요청 문의하기
EP20K60EFC324-3 - APEX 20KE 60K Gates 2560 Cells 324-FBGA | Intel
EP20K60EFC324-3

EP20K60EFC324-3 - APEX 20KE 60K Gates 2560 Cells 324-FBGA | Intel

The Intel EP20K60EFC324-3 is a member of the APEX 20KE programmable logic device (PLD) family, integrating 60K gates and 2560 logic elements into a 324-ball FineLine BGA (FBGA) package. It combines look-up table (LUT)-based logic with embedded system-on-a-programmable-chip (SOPC) features, targeting high-density glue logic, bus interface, and DSP co-processing in communications and industrial systems. A Field-Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells, all controlled by SRAM or fuse-based configuration memory. FPGAs sit hierarchically under programmable logic devices (PLDs), then complex programmable logic devices (CPLDs), and ultimately the broader category of digital logic ICs. The APEX 20KE family uses a MultiCore architecture that pairs logic elements with embedded array blocks (EABs) used as memory, ROM, or specialized arithmetic functions. Key features include 2560 logic cells, 196 user I/O pins, an internal maximum frequency of 160 MHz, and 1.72 ns propagation delay. The device operates from a 1.8 V core supply with 0.22 µm CMOS process technology, delivering up to 182 MHz peak performance. It supports in-system programmability via the IEEE 1149.1 JTAG interface and is offered in a commercial 0°C to 85°C temperature grade. The 324-FBGA package measures 19×19 mm and uses a 1.0 mm ball pitch for high-density board integration. The APEX 20KE architecture integrates up to 12 embedded system blocks (ESBs) that can each be configured as dual-port RAM, single-port RAM, ROM, or CAM, enabling true SOPC integration. Each logic element contains a 4-input LUT, a programmable register, and carry/chain logic for efficient arithmetic. The device supports LVTTL, LVCMOS, SSTL, and GTL+ I/O standards with slew-rate and drive-strength control, allowing flexible interfacing to memories, microprocessors, and ASICs. Typical applications include telecommunications backplane interfacing, PCI bridge logic, high-speed data path conversion, and digital signal processing co-processors. The 60K-gate density is well-suited to multi-channel serial protocol bridging and image preprocessing pipelines. When designing with the EP20K60EFC324-3, plan power sequencing for the 1.8 V VCCINT rail and the 3.3 V VCCIO rails separately. Use the JTAG port for boundary-scan test and in-field firmware updates. Configure unused I/O pins as tri-stated inputs with weak pull-ups to reduce quiescent current and improve signal integrity. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in a single manufacturer datasheet, giving engineers a faster path to part selection.

견적 요청 문의하기
EP20K60EFC324-3N - 60K Gate 196 I/O APEX 20KE FPGA | Altera
EP20K60EFC324-3N

EP20K60EFC324-3N - 60K Gate 196 I/O APEX 20KE FPGA | Altera

The Altera EP20K60EFC324-3N is an APEX 20KE field-programmable gate array (FPGA) with 60,000 usable system gates, 2,560 logic elements, and 196 user I/Os, delivered in a 324-ball FineLine BGA (FBGA) package. It operates from a 1.8 V core supply within a 1.71 V to 1.89 V range and supports a maximum internal clock frequency of 182 MHz in this -3 speed grade. The device is built on a 0.22 um CMOS process and is specified for commercial temperature environments from 0°C to 85°C. An FPGA is an integrated circuit whose logic fabric can be reprogrammed after manufacturing using hardware description languages such as VHDL or Verilog. Unlike fixed-function ASICs, an FPGA contains configurable logic blocks, embedded memory, and routing resources that allow a designer to create custom datapaths and state machines in firmware. The APEX 20KE family from Altera combines a programmable logic array with embedded system blocks for memory and product-term logic, making it useful for glue logic, bus bridging, protocol processing, and custom coprocessing tasks. The EP20K60EFC324-3N sits in the hierarchy FPGA > programmable logic device > integrated circuit. Key features of the EP20K60EFC324-3N include 2,560 logic elements, 196 user I/O pins, and 60K typical gates. The 324-FBGA package measures 19 mm x 19 mm and the device is supplied in bulk packaging. The -3 speed grade provides an internal operating frequency of 182 MHz, while the MultiCore architecture allows simultaneous implementation of register-based logic, memory, and product-term logic. The 1.8 V core minimizes dynamic power for mid-density communications, industrial, and instrumentation applications. The EP20K60EFC324-3N uses Altera's MultiCore architecture, combining look-up-table based logic elements with embedded system blocks for dual-port RAM, FIFO, and product-term functions. This heterogeneous fabric allows designers to reduce board-level part count by integrating small memory functions and combinatorial logic in one FPGA. The device is configured from an EPC configuration device or a processor after power-up. As part of the APEX 20KE family, it supports a 3.3 V or lower I/O environment and provides manageable timing closure through the Quartus II development environment. The 0.22 um process balances density and performance at a 1.8 V core voltage. Typical applications for the EP20K60EFC324-3N include telecom interface bridging, network line-card control logic, industrial sensor aggregation, and test instrumentation digital front ends. Its 196 I/Os are sufficient to connect a 32-bit microprocessor bus, SRAM, and multiple UART/SPI interfaces. The 2,560-element logic array can implement UARTs, FIFOs, parity and CRC checkers, or a soft-core state machine without an external CPLD. When designing the EP20K60EFC324-3N into a board, verify power-supply sequencing and decoupling. The core must be held within 1.71 V to 1.89 V, and each VCC pin should be bypassed with low-ESR ceramic capacitors close to the ball pads. Because the FPGA is volatile, provide a configuration source and reset strategy for reliable start-up. This page aggregates verified distributor specifications, speed-grade ordering options, and practical design notes that are not always visible in the Altera APEX 20K datasheet, including availability through Rochester Electronics and drop-in speed-grade variants in the same 324-FBGA footprint. Use this information to compare sourcing choices before committing a new PCB.

견적 요청 문의하기
EP20K60EFI144-2X - APEX 20KE FPGA 60K Gates 144-FBGA | Altera
EP20K60EFI144-2X

EP20K60EFI144-2X - APEX 20KE FPGA 60K Gates 144-FBGA | Altera

The Altera (now Intel) EP20K60EFI144-2X is a member of the APEX 20KE programmable logic device family that delivers 60,000 typical gates in a 144-pin FineLine BGA (LBGA) package. It integrates LUT-based logic, product-term logic, and embedded memory blocks into a MultiCore architecture, enabling true system-on-a-programmable-chip (SOPC) integration for register-intensive data-path and datapath-control designs. The -2X speed grade with 2.41 ns propagation delay targets designs that need deterministic logic timing at 1.8 V core. A field-programmable gate array (FPGA) is a semiconductor IC containing configurable logic blocks (CLBs), programmable interconnect, and dedicated I/O cells that allow engineers to implement arbitrary digital logic through software-defined configuration bitstreams. FPGAs sit hierarchically between ASICs (which offer higher density but are fixed at tape-out) and CPLDs (which are smaller and non-volatile). The APEX 20KE family specifically combines LUT logic, product-term logic, and embedded system blocks (ESBs) - useful for memory-intensive designs needing mixed datapath and control logic on a single die. Key features include 60,000 typical gates with 2,560 logic elements (LEs), a 1.8 V core supply (range 1.71 V to 1.89 V), 4 dedicated inputs plus 93 user I/O lines (total 144 terminals), 200 MHz internal operation, and 0.22 µm CMOS process technology. The 144-pin FineLine BGA package provides high board density while supporting LVDS I/O. The -2X industrial speed grade is rated for -40 °C to +85 °C ambient operation. The MultiCore architecture partitions each logic element between LUT-based register-intensive logic and product-term logic for wide combinational functions, while embedded system blocks provide dual-port RAM and CAM. This is well-suited to designs requiring on-chip memory buffering alongside high-speed glue logic. The device supports in-system programmability via IEEE 1149.1 (JTAG) boundary-scan and configuration via serial or parallel PROM. Typical applications include telecommunications backplane glue logic, industrial control and instrumentation datapaths, PCI bridge designs, and ASIC prototyping. The 93 user I/Os make it suitable for memory-interface and parallel-bus bridging, while LVDS support allows direct connection to high-speed LVDS peripherals. Compact BGA packaging suits space-constrained designs where the original 240-pin APEX 20K footprint is not required. When designing with this part, note that the APEX 20KE family is NRND/EOL in most channels; verify supply-chain availability and check Intel FPGA product longevity. Use the Quartus II (legacy) or Quartus Prime programmer flow for configuration bitstream generation, and respect 1.8 V core supply tolerance for power-rail sequencing. This page synthesizes distributor pricing, drop-in APEX 20KE alternatives in the same FBGA-144 footprint, and practical design notes that complement the official Altera APEX 20KE datasheet (A-DS-APEX20KE-02).

견적 요청 문의하기
EP20K60EQC208-1 - APEX 20KE FPGA 60K Gates | Altera
EP20K60EQC208-1

EP20K60EQC208-1 - APEX 20KE FPGA 60K Gates | Altera

The Altera EP20K60EQC208-1 is an APEX 20KE field-programmable gate array (FPGA) with 60,000 system gates, 2,560 logic elements, 32,768 bits of embedded RAM, and 148 user I/O pins, supplied in a 208-pin BQFP/PQFP package that operates from a 1.8 V core supply. An FPGA is a semiconductor device that contains thousands or millions of programmable logic cells and programmable interconnect. Unlike a fixed-function ASIC, an FPGA can be configured after manufacturing using a bitstream that defines logic functions, memory maps, and I/O behavior. In the power electronics and embedded systems hierarchy, an FPGA sits between simple CPLDs and high-end ASSP/SoC devices; it provides design flexibility by allowing engineers to implement custom digital logic, protocol bridges, and DSP pipelines without committing to a custom mask. The EP20K60EQC208-1 belongs to Altera's APEX 20K family, which combined look-up-table logic blocks with embedded memory and high-speed interconnect. Key features that differentiate this device include 60K usable system gates, 2,560 logic elements, 32,768 RAM bits, and 148 user I/O pins in a 208-lead BQFP package. The device is CMOS-based and operates with a 1.8 V core supply, making it suitable for low-voltage, mid-density board designs. According to available distributor listings, the speed grade supports internal operation up to 250 MHz, and the C temperature grade is specified for 0°C to 85°C operation. The package uses gull-wing square quad flat-pack construction for surface-mount assembly. Architecturally, the EP20K60EQC208-1 uses the APEX 20K MultiCore architecture, which integrates LUT-based logic cells, embedded system blocks, and high-speed routing resources. This lets a single FPGA implement state machines, memory functions, and data-path operations on one chip, reducing board area compared with multiple smaller programmable logic devices. The device also supports system-on-a-programmable-chip (SOPC) design flows, enabling soft processor and peripheral integration on older 1.8 V designs. Its 148 user I/O pins can connect to a wide range of board-level buses, but exact I/O standard support and drive capability must be checked in the official APEX 20K datasheet. Typical applications include legacy telecom line-card bridging, industrial control I/O expansion, video interface conversion, digital signal pre-processing, and prototype/education boards where 1.8 V FPGA logic is acceptable. The combination of embedded RAM and 60K gates makes it particularly useful where a design needs moderate FPGA resources but cannot migrate to a newer 1.2 V or 0.9 V fabric. A practical design consideration is that the core is 1.8 V, so the board must allocate a stable 1.8 V rail separate from any higher-voltage I/O plane. The device is a legacy APEX 20K part; for new production designs, a current Intel programmable device is usually preferred, but for repairing or maintaining existing APEX 20K systems, the EP20K60EQC208-1 remains a relevant pin-compatible target. This page adds distributor-verified availability clues, drop-in APEX 20K alternatives, and design guidance for legacy FPGA maintenance that are not printed on a distributor cart page.

견적 요청 문의하기
EP20K60EQC208-1X FPGA - 60K Gate 250MHz, 1.8V | Intel
EP20K60EQC208-1X

EP20K60EQC208-1X FPGA - 60K Gate 250MHz, 1.8V | Intel

The Intel (formerly Altera) EP20K60EQC208-1X is an APEX 20KE field-programmable gate array (FPGA) with 60K typical gates, 2,560 logic elements/cells, 148 user I/Os, and 32,768 RAM bits. Fabricated in 0.22um CMOS and operating from a 1.8V core supply, it supports a listed internal frequency of 250MHz and comes in a 208-pin PQFP (BFQFP) surface-mount package. A field-programmable gate array (FPGA) is a semiconductor device containing configurable logic blocks, programmable interconnects, and embedded memory that the designer configures after manufacturing. FPGAs sit above complex programmable logic devices (CPLDs) in capacity and are used to implement parallel logic, protocol bridging, DSP pipelines, and system-on-a-chip solutions. The EP20K60EQC208-1X belongs to the APEX 20K family, which Altera positioned as a system-on-a-programmable-chip (SOPC) platform combining look-up-table logic, product-term structures, and memory resources on a single 1.8V device. Understanding this hypernym is important because FPGA selection is driven by gates, logic elements, RAM bits, I/O count, package, speed grade, and configuration options rather than a single datasheet parameter. Key features of the EP20K60EQC208-1X include its 60K-gate capacity, 2,560 logic elements, 148 user I/O pins, and 32,768 RAM bits. The listed 250MHz internal frequency and 0.22um CMOS process allow it to handle moderately fast parallel data paths in legacy industrial and communication boards. Its 208-pin PQFP package provides a practical pin count for board routing, and the commercial 0C to 85C temperature range covers indoor and telecom equipment environments. The -1X speed designation represents the fastest ordering-code class visible in the fetched listings, making it preferable where timing closure is tight. Architecturally, the APEX 20KE family was one of Altera's first MultiCore-based FPGA families, integrating look-up-table logic, product-term logic, and embedded memory resources. The 1.8V core voltage reduces power compared with earlier 2.5V and 3.3V FPGAs while retaining I/O flexibility for legacy 3.3V and 2.5V interfaces when VCCIO is correctly configured. The 2,560 logic elements can be used as synchronous counters, state machines, datapath FIFO controllers, or small parallel multipliers, while the RAM bits support FIFO buffers and register files without consuming external SRAM. Because the device is not in active production today, exact timing models should be taken from the archived APEX 20K device handbook and validated in the Altera/Intel Quartus version that supports this device family. Typical applications for the EP20K60EQC208-1X include communications line-card bridging, industrial control logic, legacy test and measurement pattern generation, high-speed data buffering, video scan conversion, and medical front-end interfacing. Its 148 user I/Os make it useful for connecting parallel buses, memories, and peripheral controllers on legacy 1.8V/2.5V/3.3V boards. For new designs, the device is usually selected only when form-fit-function replacement or supply continuity is required; otherwise a modern FPGA offers greater density and lower power. A key design consideration is that EP20K60EQC208-1X must be configured after power-up from an external EPC2 or EPC16 configuration device, or through JTAG, since SRAM-based FPGAs lose their configuration on power loss. The 1.8V core voltage must be supplied separately from the I/O voltage, and all VCC/GND pins require correct decoupling. If a board already uses an APEX 20K 208-pin PQFP footprint, the -1 and -2 speed variants listed on this page can serve as drop-in supply-chain alternatives after timing verification. This page synthesizes distributor inventory, same-family drop-in alternatives, practical design guidance, and cross-reference information that is not consolidated in the manufacturer datasheet. It is intended to help engineers identify replacements, avoid obsolete-part pitfalls, and understand where the EP20K60EQC208-1X still fits in legacy system maintenance and repair.

견적 요청 문의하기
EP20K60EQC208-2 - APEX-20KE FPGA 60K Gates 200MHz | Intel
EP20K60EQC208-2

EP20K60EQC208-2 - APEX-20KE FPGA 60K Gates 200MHz | Intel

The Intel (formerly Altera) EP20K60EQC208-2 is a member of the APEX-20KE® programmable logic device family, integrating 60,000 gates and 2,560 logic elements into a single CMOS FPGA die. Housed in a 208-pin Power Quad Flat Pack (PQFP / BFQFP) package measuring 28 mm × 28 mm, the device is built on a 0.22 µm process and operates from a 1.71 V to 1.89 V core supply with internal performance up to 200 MHz. The part exposes 148 user I/Os and supports both LVTTL and LVCMOS I/O standards, making it a flexible glue-logic and bus-interface solution for mid-1990s-to-early-2000s designs. An FPGA (Field Programmable Gate Array) is a reprogrammable semiconductor device whose logic function is defined by a user-loaded configuration bitstream rather than by hard-wired mask layers. Within the broader taxonomy, an FPGA belongs to the class of programmable logic devices (PLDs), alongside CPLDs (Complex Programmable Logic Devices) and SPLDs (Simple Programmable Logic Devices). FPGAs occupy the high-density, high-performance end of that hierarchy, enabling integration of processor cores, memory controllers, and custom datapaths on a single chip, and serve as a foundational technology in modern digital design. Key features of the EP20K60EQC208-2 include its MultiCore™ architecture, which combines a Look-Up Table (LUT) based logic fabric with embedded array blocks (EABs) suitable for implementing RAM, ROM, and FIFO memories. The device includes four phase-locked loops (PLUs) for clock synthesis and skew management, supports in-system programmability (ISP) via the IEEE 1532 boundary-scan interface, and offers built-in JTAG support for board-level testability. Typical applications for this device include telecom line-card glue logic, industrial control bus bridges, PCI bus interface controllers, and legacy peripheral aggregation. The wide I/O count allows direct connection to address and data buses without external transceivers, simplifying board layout in cost-sensitive embedded systems. When designing with this part, ensure that your configuration memory is supplied with a stable 1.8 V rail and that the JTAG chain is properly terminated. Designers should consult the APEX 20KE device handbook for Quartus II programming flow and timing constraints. This page consolidates distributor pricing, drop-in alternatives, and design notes not readily available in the manufacturer datasheet.

견적 요청 문의하기
EP20K60EQC208-2N - 60K Gate APEX 20KE FPGA | Intel
EP20K60EQC208-2N

EP20K60EQC208-2N - 60K Gate APEX 20KE FPGA | Intel

The Intel EP20K60EQC208-2N is an APEX 20KE field-programmable gate array (FPGA) with 60,000 typical gates, 2,560 logic elements, 148 user I/O pins, and a 200 MHz maximum internal frequency rating, supplied in a 208-pin BFQFP/PQFP package. It is the lead-free N-suffix variant of the -2 speed-grade EP20K60E device and operates from a nominal 1.8 V core supply. A field-programmable gate array is an integrated circuit that can be reconfigured after manufacturing to implement arbitrary digital logic. FPGAs sit above simple programmable logic devices in the digital logic hierarchy, offering gate counts in the tens of thousands or more, embedded memory, and flexible I/O. The APEX 20KE family combines FPGA lookup-table logic with product-term support, creating a system-on-a-programmable-chip architecture that designers can use for protocol bridging, DSP front ends, and custom interface logic. Key features of the EP20K60EQC208-2N include 60,000 typical gates, 2,560 logic elements, 148 user I/O pins, and a 1.72 ns propagation delay reported by DigChip. The family is fabricated in 0.22 um CMOS and is specified for operation from 0 to 85 °C. The 208-pin square PQFP package measures 28 mm by 28 mm and uses gull-wing terminals, making it suitable for conventional surface-mount assembly. Architecturally, APEX 20KE devices integrate look-up-table logic, product-term macrocells, and embedded memory blocks, allowing the same device to handle register-intensive state machines and data-path functions. The -2 speed grade is a mainstream performance option between the slower -3 grade and the faster -1 or -1X grades. The N suffix indicates lead-free finish, which is important for RoHS-oriented production lines. Typical applications include telecom and line-card bridging, industrial control logic, display and video interface controllers, and high-speed ADC/DAC front-end aggregation. The 148 user I/Os are sufficient for 16-bit or 32-bit parallel buses plus control signals. The 200 MHz internal clock capability also supports moderate-rate packet processing and custom coprocessing tasks. When designing with the EP20K60EQC208-2N, confirm the FPGA configuration method during schematic design and provide adequate decoupling on the 1.8 V core rail. Because this is an older APEX 20KE part, avoid assuming indefinite factory availability for high-volume new designs unless the supply chain has been explicitly validated. This page synthesizes distributor availability, package-specific guidance, speed-grade comparisons, and practical design notes that are not always visible on a manufacturer datasheet. The data is maintained as of 2026-09-08 and reflects current web sources.

견적 요청 문의하기
EP20K60EQC208-2X - APEX-20KE FPGA, 60K Gates, 208-PQFP | Intel
EP20K60EQC208-2X

EP20K60EQC208-2X - APEX-20KE FPGA, 60K Gates, 208-PQFP | Intel

The Intel (formerly Altera) EP20K60EQC208-2X is a member of the APEX-20KE family of field-programmable gate arrays (FPGAs) delivering 60,000 typical ASIC gates and 32,768 bits of embedded memory in a 208-pin Power Quad Flat Pack (PQFP / BFQFP) package. The device integrates 2560 logic elements, 148 user I/O pins, and 4 embedded PLLs (LVDS-capable), fabricated on a 0.22 µm CMOS process with MultiCore architecture combining look-up table (LUT) and product-term (EAB) logic in a single fabric. An FPGA (Field-Programmable Gate Array) is a programmable logic device that allows hardware designers to configure arbitrary digital circuits using a matrix of configurable logic blocks (CLBs), embedded memory blocks, and routing interconnects. The APEX-20KE belongs to the broader taxonomy: FPGA -> programmable logic -> configurable logic IC -> semiconductor. It is particularly suited to SOPC (System-On-a-Programmable-Chip) integration, where processor cores, memory, and custom peripherals coexist on a single reprogrammable device, replacing what would otherwise require multiple ASICs or a microcontroller plus external glue logic. Key specifications of the EP20K60EQC208-2X include 32,768 system gates per the APEX-20KE datasheet, 32,768 RAM bits across embedded array blocks (EABs), 4 phase-locked loops, and a maximum internal frequency of 200 MHz with propagation delays as low as 1.72 ns. The device operates from a 1.8 V core supply (1.71 V – 1.89 V) and supports multi-voltage I/O standards (LVTTL, LVCMOS, PCI, SSTL, LVDS) on its 148 user I/O pins, all routed through 8 I/O banks. Architecturally, the APEX-20KE family introduced MultiCore logic, embedding MegaLAB structures that group 16 logic elements (LEs) plus a single EAB into a building block that can be configured as either wide fan-in product-term logic or as LUT-based fine-grained logic. This dual-mode fabric targets both datapath-style register-intensive designs and PAL/PLA-style state-machine code. The 'X' speed grade places this part in the -2X performance bin, while the industrial 0 °C to 85 °C operating temperature range fits commercial and industrial embedded designs. Typical applications include telecommunications line cards, industrial control glue logic, PCI interface bridging, digital signal processing pre-processing, and legacy ASIC prototyping. The wide-gate-count headroom (60K gates) makes it suitable for glue-logic consolidation where a discrete CPLD-plus-microcontroller pair would otherwise be required. A practical design tip when using this part: configure the four PLLs early in the Quartus design flow because LVDS I/O and clock-domain skew are easier to close when PLL block placement is locked before fitter routing. This page synthesizes pricing, drop-in alternatives, design notes, and parameter comparisons not found in the manufacturer datasheet alone, supporting engineers evaluating the EP20K60EQC208-2X for legacy or long-lifecycle designs.

견적 요청 문의하기
EP20K60EQC208-2XN - 60K-Gate APEX-20KE FPGA, 208-PQFP | Intel
EP20K60EQC208-2XN

EP20K60EQC208-2XN - 60K-Gate APEX-20KE FPGA, 208-PQFP | Intel

The Intel EP20K60EQC208-2XN is a high-density APEX-20KE series Field Programmable Gate Array (FPGA) featuring 60,000 typical gates, 2,560 logic elements, and 32,768 bits of embedded RAM, housed in a 208-pin Plastic Quad Flat Pack (PQFP/BFQFP) surface-mount package. The device is fabricated on a 0.22 µm CMOS process and operates from a 1.8 V core supply (1.71 V to 1.89 V). According to the manufacturer datasheet, the part provides 148 user I/Os and supports internal clock frequencies up to 200 MHz (with a propagation delay of approximately 1.72 ns per logic element). A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that combines thousands of configurable logic blocks, programmable interconnect, and on-chip memory into a single semiconductor. Within the broader taxonomy, an FPGA sits above simple CPLDs in density and below ASICs in non-recurring engineering cost. The APEX-20KE family introduced MultiCore architecture, merging LUT-based logic (efficient for data-paths, register-intensive math, and DSP) with product-term logic (efficient for control/state machines) on the same die, plus dedicated embedded system blocks (ESBs) for memory. This makes the APEX-20KE a hybrid logic-and-memory platform rather than a pure LUT device. Key differentiating features include 2560 logic elements, 32 Kbits of distributed RAM, in-system programmability via JTAG, MultiVolt I/O support for interfacing to 1.8 V, 2.5 V, 3.3 V and 5 V buses, and a built-in PLL for clock management. The '-2' speed grade and 'N' suffix denote the commercial temperature range (0 °C to 85 °C) and lead-free, RoHS-compliant packaging per the FindIC summary. The EP20K60EQC208-2XN is typically used in telecommunications line cards, industrial control backplanes, and legacy PCI bridge designs where high logic density and large embedded RAM are required. Designers migrating to newer Cyclone or MAX families should treat this part as a long-term-support / last-time-buy candidate rather than a greenfield choice. When designing with this device, provide at least four 0.1 µF decoupling capacitors around the package perimeter, keep the PLL power island isolated, and program the configuration bitstream via the ByteBlaster or Master/Slave serial modes documented in the APEX-20KE datasheet. The 208-PQFP is a perimeter-lead package, so PCB escape routing is straightforward but limits pin density versus a BGA. This page synthesizes distributor stock data, parametric cross-references, and practical design considerations that are not collected in any single manufacturer document.

견적 요청 문의하기
EP20K60EQC208-3 - APEX 20KE FPGA 60K Gates 208-PQFP | Intel / Altera
EP20K60EQC208-3

EP20K60EQC208-3 - APEX 20KE FPGA 60K Gates 208-PQFP | Intel / Altera

The Intel / Altera EP20K60EQC208-3 is a member of the APEX-20KE family of Field Programmable Gate Arrays (FPGAs), delivering 60,000 typical gates, 2,560 logic elements, and 32,768 bits of embedded SRAM in a 208-pin Plastic Quad Flat Pack (PQFP / BFQFP) package. Built on a 0.22 µm CMOS process with a 1.8 V core supply, the device integrates up to 148 user I/Os and provides MultiCore™ system-on-a-programmable-chip (SOPC) integration including look-up tables (LUTs), product-term logic, and embedded memory blocks on a single die. An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose logic fabric, interconnect, and I/O behavior are defined by user-programmed configuration data rather than fixed mask geometry. Within the broader taxonomy of programmable logic devices (PLDs), FPGAs sit above simple CPLDs in density and complexity, supporting full system-on-chip (SoC) integration, high-speed parallel processing, and large embedded memory. The APEX 20KE family introduced MultiCore™ architecture to merge LUT-based and product-term-based logic elements on one fabric, enabling designers to choose the optimal logic primitive for each block of a design. The EP20K60EQC208-3 supports a maximum internal frequency of 160 MHz, with propagation delays around 1.72 ns and a speed grade of -3, making it suitable for high-performance glue logic, bus interfaces, and datapath acceleration in telecom, industrial, and military-aerospace systems. The device offers 32768 bits of embedded SRAM, dedicated high-speed I/O banks, and supports LVTTL, LVCMOS, PCI, and other common interface standards through programmable I/O standards. Typical applications for the EP20K60EQC208-3 include telecommunications line cards, ASIC prototyping, DSP front-end co-processing, high-speed bridge and protocol conversion, and industrial control. Designers also use this part for legacy system upgrades where 5V-tolerant or 3.3V PCI I/O is required, and where the 208-pin PQFP footprint allows through-hole-friendly PCB assembly for rugged environments. When designing with the EP20K60EQC208-3, ensure proper decoupling with 0.1 µF and 10 µF capacitors placed close to each supply pin, and follow Altera's Quartus / MAX+PLUS II configuration guidelines for JTAG or passive serial configuration modes. Note that the part is mature and may be subject to last-time-buy notices; verify current lifecycle status with authorized distributors before committing to new designs. This page consolidates distributor pricing, verified cross-references to APEX 20KE speed-grade variants, and practical design notes not found in a single source — saving hours of manual datasheet cross-checking for engineers maintaining legacy Altera designs.

견적 요청 문의하기
EP20K60EQC208-3N - APEX 20KE FPGA 60K Gates 148 I/O | Intel
EP20K60EQC208-3N

EP20K60EQC208-3N - APEX 20KE FPGA 60K Gates 148 I/O | Intel

The Intel (Altera) EP20K60EQC208-3N is an APEX-20KE Field Programmable Gate Array (FPGA) with approximately 60,000 typical gates, 2,560 logic elements, 32,768 bits of embedded RAM, and 148 user I/Os, supplied in a 208-pin plastic quad flat pack package sometimes called BFQFP or PQFP-208. It is the commercial-temperature, lead-free (-N), speed-grade -3 variant of the EP20K60 family and operates from a 1.8 V core supply. An FPGA is a semiconductor device containing a fabric of programmable logic elements, embedded memory, and general-purpose I/O that can be configured after manufacturing to implement digital logic circuits. Unlike fixed-function ASICs or ASSPs, FPGAs allow engineers to change the hardware design through configuration files, enabling rapid prototyping and field-hardware revisions. FPGAs sit within the broader programmable-logic hierarchy: FPGA -> programmable logic device (PLD) -> integrated circuit -> semiconductor. APEX-20KE was Altera/Intel s MultiCore architecture family that integrated look-up-table logic, product-term macrocells, and embedded RAM on a single chip. The EP20K60EQC208-3N key features include 2,560 logic elements, 32,768 embedded RAM bits, and 148 user I/O pins in a compact 208-pin QFP. According to the search data, it has a maximum internal frequency of 182 MHz for the -3 speed grade, a 3.56 ns propagation-delay class, and commercial 0 C to +85 C operating temperature range. The pin-and-lead-free suffix N means this device uses lead-free solder finish. The 1.8 V core reduces dynamic power relative to older 2.5 V or 3.3 V programmable-logic families while retaining compatibility with intellectual-property cores from the APEX era. The APEX-20KE architecture combines a look-up-table-based FPGA granularity with embedded system-level blocks, allowing designs such as protocol bridges, DSP front ends, and memory controllers to be implemented in one component. The 148 user I/Os provide considerable parallel connectivity for glue logic replacement in legacy systems. Because this is an SRAM-based FPGA, it must be configured at power-up from an external configuration device or host processor. The -3 speed grade is a moderate-speed bin intended for cost-sensitive applications that do not require the fastest -1X performance. Typical applications include telecom line-card interface logic, industrial machine control, video timing/format conversion, medical imaging signal conditioning, and data-acquisition front ends where a reprogrammable Altera-compatible footprint is needed. Designers should respect the 1.8 V core-power pin count and place decoupling capacitors close to every VCC and VCCIO pin. The enable/configuration pins must be pulled according to the APEX 20K configuration guidance. For new designs, this part is a legacy device and may not be recommended; check current Intel/Altera lifecycle or choose modern equivalents when feasible. This page synthesizes distributor pricing, drop-in Altera/Intel APEX-family alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
EP20K60EQC240-1X - APEX-20KE FPGA, 60K Gates, 240-PQFP | Intel / Altera
EP20K60EQC240-1X

EP20K60EQC240-1X - APEX-20KE FPGA, 60K Gates, 240-PQFP | Intel / Altera

The Intel / Altera EP20K60EQC240-1X is a member of the APEX-20KE Field Programmable Gate Array family, delivering 60K gates with 2560 logic elements in a 240-pin PQFP (Plastic Quad Flat Pack) package. It operates on a 1.8V core supply (1.71V to 1.89V), supports up to 151 user I/Os, and is manufactured on a 0.22-micron CMOS process. The device is part of Altera's MultiCore architecture combining look-up table (LUT) logic with embedded memory blocks for system-on-a-programmable-chip (SOPC) integration. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit that can be reconfigured by the designer after manufacturing. FPGAs sit in the programmable logic hierarchy between simple PLDs/CPLDs and fixed-function ASICs. The APEX-20KE family specifically targets high-density, high-performance designs where on-chip memory and DSP-style arithmetic matter, bridging the gap between traditional glue logic and full custom silicon. Key features of the EP20K60EQC240-1X include up to 250 MHz internal operation, MultiCore architecture integrating embedded memory with LUT logic, in-system programmability via SRAM configuration, and 196 maximum user I/Os in the BGA variant. The '1X' speed grade places the part in Altera's commercial performance tier with 1.72 ns propagation delay. The 'E' suffix denotes the enhanced APEX-20KE revision with improved memory and I/O features over the original APEX-20K family. The architecture combines four-input LUTs with embedded array blocks (EABs) for memory and DSP functions. Each EAB can be configured as RAM, ROM, or multiplier blocks, allowing the device to absorb soft-core processors, FIFOs, and signal-processing datapaths directly into the fabric. The 1.8V core and MultiVolt I/O support interface to 1.8V, 2.5V, 3.3V, and 5V systems without external level translation. Typical applications include telecommunications line cards, networking equipment, industrial control and automation, ASIC prototyping, and DSP front-end preprocessing. The combination of dense logic and embedded memory is well suited for protocol conversion, packet processing, and custom glue logic in mid-volume designs. When designing with this part, verify that your Quartus version still targets the legacy APEX-20KE device family, as newer Quartus releases have dropped legacy device support. Also confirm package availability - this device is in EOL/Obsolete status per industry sources, so design-in for new products is discouraged unless a long-life agreement exists.

견적 요청 문의하기