집적 회로

하위 카테고리

📁 ADC/DAC 3,100+ 제품 📁 증폭기 IC 1,900+ 제품 📁 오디오 코덱 18 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 660+ 제품 📁 Comparator ICs 1 제품 📁 DSP 1,100+ 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 7,300+ 제품 📁 인터페이스 IC 3,300+ 제품 📁 LED 드라이버 1 제품 📁 로직 IC 460+ 제품 📁 메모리 IC 870+ 제품 📁 마이크로컨트롤러 20,000+ 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 14 제품

제품 (39,000+)

P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors
P4081NSN7MMC

P4081NSN7MMC - 8-Core QorIQ P4 1.2GHz SoC | NXP Semiconductors

The NXP Semiconductors P4081NSN7MMC is an 8-core 32-bit Power Architecture System-on-Chip (SoC) from the QorIQ P4 family, operating at up to 1.2 GHz per core, integrated in a 1295-ball FCBGA package measuring 37.5 x 37.5 mm. It implements the PowerPC e500mc core, supports DDR2/DDR3 memory with ECC, and integrates packet-oriented I/O including 1/10 GbE, PCIe and Serial RapidIO (SRIO). The device is qualified for the 0°C to 105°C commercial operating range. A QorIQ communications SoC is a high-performance multi-core processor designed for networking, telecom, and embedded data-plane workloads where deterministic throughput, hardware acceleration, and rich I/O are equally important to raw CPU frequency. Within the power-management taxonomy the P4081 sits at the intersection of MPU (microprocessor unit), multicore SoC, and communications platform. The QorIQ family as a whole replaced the legacy PowerQUICC line and is positioned between general-purpose application processors and dedicated network ASICs. Key features of the P4081 include eight e500mc cores with hardware hypervisor and virtualization support, dedicated L2 cache, a 64-bit DDR2/3 memory controller with ECC, multiple GbE and 10 Gigabit Ethernet MACs, PCIe Gen1/Gen2, and Serial RapidIO 1.3 interfaces. The chip is fabricated in a 45 nm CMOS process and requires 1.5 V, 1.8 V, 2.5 V and 3.3 V power rails. The combination of dual-cluster quad-core topology and a hardware-accelerated datapath makes it well suited to control-plane and data-plane workloads running concurrently. Architecturally the P4081 places cores, L2 cache, the memory controller and the network/IO fabric on a single die; the Corenet coherent fabric allows each core to share memory and accelerator resources without software coherence management overhead. This tightly integrated SoC design removes the chip-to-chip latency of multi-chip designs used in earlier PowerPC platforms. Typical applications of the P4081NSN7MMC include enterprise routers and switches, multi-service gateways, wireless baseband controllers, network security appliances, and industrial control or storage controllers that require both high compute density and rich packet-oriented IO. When designing with this device, allocate the largest copper plane to the 1.5 V and 1.8 V cores because the 45 nm process is sensitive to supply noise; a 12+ layer PCB with buried capacitance is recommended for layout, and the BGA requires a socket or direct solder attach. This page synthesizes distributor availability, supply-chain status, and pin-compatible QorIQ family variants not consolidated in the original NXP datasheet, giving you a one-stop reference for sourcing and replacement decisions.

견적 요청 문의하기
P5010NSE1QMB557 - QorIQ P5 PowerPC 64-Bit MPU, 2GHz | NXP
P5010NSE1QMB557

P5010NSE1QMB557 - QorIQ P5 PowerPC 64-Bit MPU, 2GHz | NXP

The NXP P5010NSE1QMB557 is a QorIQ P5 series communications processor built on the PowerPC e5500 core architecture, integrating a single 64-bit core running at up to 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. It is qualified for an extended industrial temperature range of -40C to +105C and supports a 64-bit DDR3/DDR3L SDRAM memory controller with ECC. Background: A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system, executing instructions fetched from external memory. High-end communications MPUs like the QorIQ P5 family target networking infrastructure - routers, switches, wireless base stations, and security appliances - where deterministic performance, large memory bandwidth, and integrated high-speed serial interfaces (SerDes) are critical. Within the system hierarchy, an MPU sits above microcontrollers (MCUs) in performance, above DSPs in control-plane flexibility, and below FPGAs in raw parallel throughput. Key features of the P5010 include: a hardware-accelerated data path supporting packet parsing and classification, integrated 10-Gigabit Ethernet and Gigabit Ethernet MACs, two PCIe Gen 2 controllers, multiple DMA engines, and a security engine supporting symmetric and asymmetric cryptographic algorithms. The platform's large L2 cache (1 MB) and L3 cache (512 KB) reduce external memory pressure and accelerate lookup-intensive workloads. The P5010NSE1QMB557 is typically applied to networking equipment such as mid-range enterprise routers, network-attached storage controllers, industrial control gateways, and unified threat management (UTM) appliances. Its combination of deterministic single-thread execution and high-speed I/O makes it well-suited to control-plane tasks that require low latency alongside heavy peripheral bandwidth. When designing with the FCPBGA-1295 package, engineers must use a multi-layer PCB (typically 12+ layers) with high-density breakouts, controlled-impedance SerDes routing, and matched-length DDR3 traces. The package's 37.5 mm body requires careful thermal management; at 2 GHz, the device dissipates approximately 8-15 W under typical workloads, often requiring a heatsink and forced airflow. This page synthesizes cross-reference data, drop-in compatible variants from the QorIQ P5 family, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP
P5010NSE1TNB

P5010NSE1TNB - QorIQ P5 2.0GHz 64-Bit PowerPC e5500 MPU | NXP

The NXP P5010NSE1TNB is a PowerPC e5500 microprocessor in the QorIQ P5 family, integrating a single 64-bit e5500 core running at 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded applications, it combines out-of-order execution, hardware virtualization support, and an integrated memory controller with high-bandwidth I/O peripherals on a single SoC. The "NSE1" speed-grade designation indicates the 1800/1333 MHz core/DDR frequency bin, and "TNB" refers to the standard-temperature FCPBGA package variant. A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system, executing program instructions and managing data flow. The PowerPC e5500 architecture is a 64-bit, superscalar, out-of-order implementation originally derived from Freescale's e500 lineage used across NXP QorIQ networking and industrial platforms. This product family sits within the broader hierarchy of microprocessor -> embedded processor -> SoC (System-on-Chip) -> semiconductor, optimized for network packet processing, secure routing, and industrial control workloads. Key features of the P5010NSE1TNB include a single e5500 core with double-precision floating point, hardware virtualization for partitioned OS environments, an integrated DDR3/DDR3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen 2 controllers, and integrated security engines. The wide I/O fabric reduces external component count, allowing compact board designs for space-constrained routers and embedded systems. The P5010NSE1TNB leverages NXP's e5500 core architecture, which combines dual-issue superscalar dispatch with out-of-order completion and AltiVec-compatible SIMD media processing. This micro-architectural depth delivers significantly higher instructions-per-clock than in-order alternatives, while integrated L2 cache and coherency logic keep memory subsystem latency low. The platform's Trusted Execution and Secure Boot features are designed for networking equipment where hardware root-of-trust is mandatory. This MPU is commonly deployed in industrial routers and secure gateways, factory automation controllers, defense and aerospace embedded systems, networked storage controllers, and single-board computing platforms. The 2.0 GHz operating point balances throughput and thermal envelope for fanless or low-airflow industrial chassis. Standard temperature grade makes it suited for commercial and industrial settings, while extended-temperature variants may be required for fully ruggedized deployments. Design considerations include proper thermal management via the exposed-die FCPBGA package, signal-integrity routing for DDR3 memory traces, and decoupling strategy for the multiple supply rails (core, I/O, DDR PHY, and PLL). Engineers should review the hardware specifications for clocking, reset, and configuration of the on-chip SerDes lanes. This page synthesizes distributor pricing, parameter data, and cross-reference information for the P5010NSE1TNB beyond what is offered in the manufacturer datasheet summary, providing engineer-oriented selection guidance.

견적 요청 문의하기
P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA
P5010NSE1TNB557

P5010NSE1TNB557 - QorIQ P5 2GHz e5500 MPU | 1295-FCPBGA

The NXP P5010NSE1TNB557 is a QorIQ P5 series PowerPC e5500 microprocessor integrating a single 64-bit core running up to 2.0 GHz, packaged in a 1295-ball FCPBGA (37.5 x 37.5 mm). It is built on a high-performance CMOS process and targets networking, telecom, and embedded compute platforms requiring deterministic throughput with a familiar Power Architecture ISA. The device ships in a standard temperature grade and is sold by Rochester Electronics as factory-traceable stock of the original Freescale/NXP silicon. A microprocessor (MPU) is the central execution unit of a computing system, fetching and decoding instructions, performing arithmetic and logic operations, and orchestrating data movement between memory and peripherals. The QorIQ P5 family sits in the broader taxonomy of PowerPC e5500 cores -> embedded microprocessors -> microcontrollers and MPUs -> integrated circuits -> semiconductors, and is widely used in wired/wireless infrastructure where per-watt performance and rich I/O matter. Key differentiating features of the P5010 include a 64-bit data path, hardware virtualization support, integrated security acceleration (SEC), and the high-bandwidth CoreNet fabric that links the core to on-chip accelerators. The 1295-ball FCPBGA package provides the dense signaling required to expose multiple 10 GbE-class SerDes lanes, DDR3/3L memory controllers, and PCI Express Gen 2 interfaces simultaneously, enabling single-chip system designs. Architecturally, the e5500 core extends the classic Power Architecture with out-of-order execution hints, larger caches, and symmetric multiprocessing support, while the platform layer adds a Data Path Acceleration Architecture (DPAA) for packet parsing, queueing, and crypto offload. This combination makes the P5010 well suited for line-card controllers, mid-range routers, and industrial gateways where deterministic latency and protocol processing coexist. Typical applications include enterprise and industrial networking equipment, telecom base stations and edge compute nodes, secure industrial control systems, single-board compute modules for defense and aerospace, and protocol-aware gateway designs. The wide I/O complement also supports storage controllers and TSN-enabled industrial Ethernet endpoints. When designing with this device, ensure the PCB can dissipate the thermal envelope of a 2.0 GHz e5500 core and follow NXP's reference schematics for DDR3L layout, SerDes routing, and core voltage rail decoupling. Firmware must initialize the RCW (Reset Configuration Word) and SERDES reference clocks before boot, and stock firmware for the P5 family is available from NXP and Rochester Electronics as factory-original parts. This page synthesizes distributor pricing, drop-in same-package alternatives, and design references that complement the manufacturer datasheet and reference manual.

견적 요청 문의하기
P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors
P5010NSE7MMB

P5010NSE7MMB - QorIQ P5 2.0GHz SoC | NXP Semiconductors

The NXP Semiconductors P5010NSE7MMB is a QorIQ P5-series communications processor built on 64-bit Power Architecture technology (e5500 core), integrating a single CPU core operating up to 2.0 GHz, hardware-accelerated security (SEC), packet processing, and high-speed serial interfaces (PCIe, Serial RapidIO, Gigabit Ethernet). It is housed in a 1295-ball FC-PBGA (FCBGA) package measuring 37.5 mm x 37.5 mm and is specified for the 0 to 105C ambient temperature range. The device is fabricated in CMOS technology and targets enterprise and service-provider networking equipment such as routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) designed for embedded networking and industrial control workloads. The QorIQ family is built on Power Architecture technology and spans entry-level single-core parts up to multi-core data-plane processors; the P5 series sits in the mid-tier with integrated datapath acceleration. Within the broader taxonomy, P5010 belongs to: communications processor -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. This hierarchical context is what distinguishes an SoC from a generic microcontroller and explains its role in wired/wireless infrastructure. Key features of the P5010NSE7MMB include a 64-bit e5500 Power Architecture core with integrated L1/L2 caches, dedicated hardware engines for pattern matching, queue management, encryption (SEC engine for IPsec/SSL), and RapidIO, plus support for DDR3 memory with ECC. The integrated datapath acceleration block offloads packet classification and QoS functions from the CPU, enabling wire-speed throughput on multi-Gigabit interfaces. According to the NXP QorIQ P5010/P5020 product brief, the e5500 core delivers higher instructions-per-clock than previous-generation e500 cores while retaining software compatibility. The architecture pairs the e5500 core with a high-bandwidth coherent interconnect that feeds multiple integrated controllers, including SerDes lanes used to configure PCIe, Serial RapidIO (SRIO), and 1G/2.5G Ethernet PHYs. The SoC's nominal core voltage is 1.00 V (range 0.95 V to 1.05 V) with separate rails for the DDR3 I/O and SerDes analog blocks; careful power-rail sequencing is required during board bring-up. The 1295-ball FC-PBGA package uses flip-chip land pads on the bottom surface and demands a matched-impedance multilayer PCB with controlled-via stitching for the core's high-speed signals. Typical applications include enterprise routers, multiservice gateways, line cards for chassis-based switches, network-attached storage controllers, industrial control and automation hosts, and secure communication appliances that benefit from on-chip SEC acceleration. The P5010NSE7MMB's 0 to 105C temperature range allows deployment in thermally constrained networking shelves where ambient cooling is provided by forced airflow rather than heatsinks. When designing with this part, pay close attention to DDR3 trace length matching (within the limits stated in the NXP hardware design guide), SerDes reference-clock jitter, and the in-package thermal dissipation of the 37.5 mm BGA - a multi-layer PCB with inner ground/power planes is essential for the high-current transient response demanded by the core and SerDes blocks. This page synthesizes distributor pricing, verified specifications, drop-in alternatives within the QorIQ family, and design notes not found in the manufacturer datasheet, giving embedded designers a single reference for evaluating the P5010NSE7MMB against current alternatives.

견적 요청 문의하기
P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP
P5010NSE7TNB557-FR

P5010NSE7TNB557-FR - QorIQ P5 1.8GHz PowerPC e5500 MPU | NXP

The NXP P5010NSE7TNB557-FR is a PowerPC e5500 microprocessor IC in the QorIQ P5 communications processor family, integrating 1 core operating up to 1.8 GHz on a 64-bit architecture, housed in a 1295-ball FCPBGA (37.5x37.5 mm) package. Designed for high-performance embedded networking and communications workloads, it combines a high-frequency e5500 core with integrated platform peripherals used in routers, switches, and security appliances. A QorIQ communications processor is a system-on-chip (SoC) that combines one or more Power Architecture CPU cores with networking-specific accelerators, security engines, and high-speed I/O, sitting between general-purpose CPUs and dedicated ASICs in the broader hierarchy of embedded processors. The P5 series specifically targets mid-range routing, switching, and unified threat management (UTM) applications where single-thread performance and high integration reduce bill-of-materials cost and board area. Key features include a 64-bit PowerPC e5500 core running up to 1.8 GHz, integrated high-speed SerDes lanes for 10 GbE and PCI Express connectivity, hardware-accelerated security engines, and the FCBGA-1295 (37.5x37.5) package with high-density interconnect for the multi-lane SerDes interfaces. The device is part of NXP's communications processor portfolio originally developed by Freescale, with the -FR suffix indicating a specific tape-and-reel packaging variant. From an architectural standpoint, the e5500 core supports hypervisor-aware virtualization, hardware page table translation, and out-of-order execution for single-thread performance critical to control-plane packet processing. The integrated SerDes and queue manager reduce external PHY count and simplify traffic management, while the high-bandwidth memory controller supports DDR3/DDR3L with ECC for high-reliability networking systems. Typical applications include enterprise routers, industrial gateways, network-attached storage (NAS) controllers, military/aerospace secure communications, and single-board computers for edge networking. The combination of single-core simplicity and integrated peripherals makes it well suited to platforms where deterministic performance matters more than raw core count. When designing with this device, plan thermal dissipation carefully: at 1.8 GHz under heavy load the FCBGA-1295 dissipates substantial power and requires a heatsink or thermal interface material rated for the expected ambient temperature. PCB layout must follow NXP's high-speed design guide for the SerDes lanes to meet signal-integrity margins. This page synthesizes distributor pricing, package details, and practical application notes for the P5010NSE7TNB557-FR beyond what the manufacturer product page alone provides.

견적 요청 문의하기
P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors
P5010NSN1MMB

P5010NSN1MMB - QorIQ P5 e5500 2.0GHz 64-bit MPU | NXP Semiconductors

The NXP Semiconductors P5010NSN1MMB is a PowerPC e5500-based microprocessor IC from the QorIQ P5 communications platform family, integrating a single 64-bit core running at 2.0 GHz in a 1295-ball flip-chip plastic BGA (FCPBGA) package measuring 37.5 mm × 37.5 mm. The part belongs to NXP's high-end embedded communications processor family, serving as the system-on-chip engine for wired and wireless infrastructure, industrial control, and defense/aerospace compute applications. A microprocessor (MPU) is an integrated circuit that contains one or more central processing units implemented as a single silicon die, designed to fetch, decode, and execute general-purpose instructions while orchestrating peripherals over bus fabrics and memory controllers. MPUs occupy the top of the embedded compute hierarchy (microprocessor -> MPU/SoC -> embedded processor -> communication processor), and QorIQ P5 devices in particular target enterprise and carrier-grade workloads where 64-bit address-space performance, hardware packet acceleration, and extended operating-temperature envelopes matter far more than instruction-level power efficiency. Key differentiating characteristics of the P5010NSN1MMB include the e5500 64-bit dual-issue superscalar Power architecture core, integrated high-bandwidth memory and I/O controllers, on-chip SerDes lanes for backplane interfaces, and 2.0 GHz maximum operating frequency. The 1295-ball FCPBGA exposes the full DDR controller, multiple Ethernet MACs, PCIe lanes, and other high-speed serial interfaces needed to drop into a top-of-rack switch, radio-network controller, or secure industrial gateway without external protocol bridges. Application fit includes Layer 2/3 enterprise switches, router control planes, secure VPN/IPsec gateways, industrial automation controllers, and defense embedded compute modules. When designing with this part, special attention must be paid to PCB stack-up for the FCPBGA, thermal dissipation, and power-rail sequencing - the e5500 core will not tolerate spec-violating supply ramps. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical sourcing notes not collected in one place in the NXP product brief.

견적 요청 문의하기
P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP
P5010NSN1QMB

P5010NSN1QMB - QorIQ P5010 SoC, 64-bit Power Arch, 2.0GHz, 1295-FCBGA | NXP

The NXP P5010NSN1QMB is a QorIQ single-core 64-bit Power Architecture system-on-chip (SoC) running at up to 2.0 GHz, housed in a 1295-pin FCBGA (37.5x37.5 mm) package. The device supports DDR3 memory with hardware ECC, integrated PCI Express Gen 2 controllers, dual Gigabit Ethernet, Serial RapidIO (SRIO), and a hardware acceleration engine for data-path offload. The part is qualified for 0 to 105C standard temperature operation. A QorIQ communications processor is a multi-core Power Architecture SoC family from NXP designed for networking, wireless base-station, and embedded infrastructure applications. QorIQ P-series parts sit in the system hierarchy as application processors -> communications processors -> SoC -> NXP QorIQ family, integrating CPU cores, memory controllers, high-speed SerDes, packet-processing accelerators, and peripheral IP into a single chip to reduce board area and BOM. Key features include one e5500 core built on Power Architecture technology, 32 KB I-cache and 32 KB D-cache per core, a shared 1 MB L2 frontside cache, the DPAA (Data Path Acceleration Architecture) engine, on-chip SEC crypto engine, and multiple high-speed SerDes lanes configurable as PCIe, SRIO, or Aurora. The 1295-FCBGA package exposes the full complement of SerDes lanes and external memory interfaces required for high-end networking line cards. The P5010 is architected around a coherent SMP fabric connecting the e5500 core to memory and I/O controllers. The e5500 core is dual-issue, out-of-order, and supports hardware virtualization, hypervisor extensions, and AltiVec SIMD-style DSP operations. Integrated DPAA provides packet parsing, queue management, and buffer management without consuming CPU cycles, freeing the core for control-plane and exception processing. Typical applications include enterprise routing and switching line cards, wireless baseband processing (3G/4G small-cell), network-attached storage controllers, industrial embedded control with deterministic networking, and secure gateway appliances. The standard temperature grade (0 to 105C) targets commercial and industrial networking equipment rather than fully automotive environments. When designing with the P5010, route DDR3 traces with matched length and 50-ohm controlled impedance. Use a multi-layer PCB with dedicated ground planes adjacent to the high-speed SerDes lanes. Provide a heatsink or thermal interface to manage the 30W+ TDP at full 2.0 GHz operation, and follow NXP layout guidelines for the FCBGA substrate. This page synthesizes distributor stock, parametric proximity to others in the same package family, and practical design guidance not found in the manufacturer datasheet, giving engineers an actionable reference alongside the official document.

견적 요청 문의하기
P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP
P5010NSN1QMB557

P5010NSN1QMB557 - QorIQ P5 2GHz PowerPC e5500 SoC | NXP

The NXP P5010NSN1QMB557 is a QorIQ P5 communications processor built on the Power Architecture e5500 core, delivering 64-bit processing at 2.0 GHz with a single core in a 1295-ball FCBGA (37.5 x 37.5 mm) package. The SoC targets enterprise switching, routing, and unified threat management workloads where deterministic single-thread throughput and large L2 cache matter more than multi-core counts. A microprocessor (MPU) is an integrated circuit that contains a central processing unit, cache hierarchy, memory controllers, and a wide peripheral set on a single die. QorIQ P-series parts belong to the Power Architecture ecosystem - a family of 64-bit embedded processors that bridge networking, storage, and industrial control. Within the broader taxonomy they sit under microprocessors -> integrated circuits -> semiconductors, sitting alongside ARM-based application processors and x86 server CPUs but optimized for packet processing and deterministic latency. Key features of the P5010 include the e5500 64-bit core with hardware virtualization, dual DDR3 memory controllers with ECC, integrated security engines (SEC), multiple RGMII/SGMII/XAUI / PCIe / SATA / USB interfaces, and on-chip SRAM for low-latency lookups. The platform is qualified for 0C to 105C ambient operation, suiting NEBS-style telecom chassis as well as fan-cooled industrial gateways. The 1295-FCPBGA provides the ball pitch and pin-out needed for multilayer PCB designs with matched impedance SERDES routing. Architecturally, the e5500 pipeline executes up to two instructions per cycle and supports out-of-order completion with branch prediction, while the platform incorporates CorDA acceleration via hardware assists for queue management and cryptography. The SEC 4.0 block accelerates DES/3DES/AES/SHA and public-key algorithms, offloading security processing from the core for line-rate IPSec and SSL. Typical applications include enterprise routers and switches, network security appliances (firewall, UTM), wireless base station controllers, storage controllers, and industrial control with deterministic networking. The combination of single high-frequency core plus ECC memory and SEC acceleration makes it ideal for low-latency control plane code. Design consideration: the FCBGA requires 8-layer minimum PCB with matched-length SERDES lanes; thermal design must keep junction below 105C with top-side heatsink plus thermal vias. Ensure firmware (U-Boot, Linux BSP) is available for your derivative before committing to layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the bare NXP datasheet, giving procurement and engineering a single reference for the P5010NSN1QMB557.

견적 요청 문의하기
P5010NSN1TNB - QorIQ P5 64-Bit e5500 MPU 2.0GHz | NXP
P5010NSN1TNB

P5010NSN1TNB - QorIQ P5 64-Bit e5500 MPU 2.0GHz | NXP

The NXP P5010NSN1TNB is a QorIQ P5 series single-core 64-bit microprocessor built on the Power Architecture e5500 core, running at up to 2.0 GHz and housed in a 1295-ball FCBGA package measuring 37.5 x 37.5 mm. It integrates a high-performance 64-bit core with on-chip cache, DDR3/3L memory controller, multiple Gigabit Ethernet interfaces, PCI Express Gen 2, Serial RapidIO, and dedicated hardware accelerators for packet processing and security offload. What is an MPU (microprocessor unit)? An MPU is an integrated circuit that contains one or more processor cores along with integrated peripherals and memory controllers, forming a complete system-on-chip (SoC) for embedded compute. QorIQ P5 series parts sit in the NXP networking communications processor hierarchy: MPU -> communications processor -> multicore SoC -> embedded networking platform, bridging general-purpose compute and hardware-accelerated datapath silicon for routers, switches, and wireless base stations. Key features of the P5010NSN1TNB include 2.0 GHz e5500 core frequency, 64-bit Power Architecture instruction set, dual DDR3/3L memory controllers supporting up to 1866 MT/s, integrated 10 GbE and multiple GbE MACs, hardware pattern matching and encryption accelerators, and a 0 to 105 degrees C extended industrial temperature grade. The 1295-ball FCBGA provides the high-pin-count interconnect needed for wide parallel memory buses and multiple SERDES lanes. The P5010NSN1TNB uses the e5500 superscalar dual-issue Power Architecture core with out-of-order execution, integrated L1 caches, and a large shared L2 cache. The integrated datapath accelerators and SerDes lanes make it a single-chip solution for Layer 2-4 packet processing in carrier-grade networking equipment. Typical applications include enterprise and carrier Ethernet routers, wireless base station controllers, network security appliances, industrial control systems with deterministic compute, and high-end networked storage controllers. The integrated 10GbE and PCIe Gen2 provide direct attach to high-speed network and expansion silicon without external bridge chips. When designing with the P5010NSN1TNB, ensure the FCBGA 1295-ball PCB land pattern is matched exactly - this package is not socketed and uses lead-free reflow. Power sequencing rails must follow the NXP P5010 reference design sequence; consult the hardware design guide for SERDES reference clock and DDR3 fly-by topology. This page synthesizes distributor pricing, real cross-reference candidates for the QorIQ P5 family, and engineering design context drawn from NXP application notes, supplementing the manufacturer datasheet with practical selection and procurement guidance.

견적 요청 문의하기
P5010NSN1TNB557 - QorIQ P5 2GHz PowerPC e5500 MPU | NXP
P5010NSN1TNB557

P5010NSN1TNB557 - QorIQ P5 2GHz PowerPC e5500 MPU | NXP

The NXP P5010NSN1TNB557 is a QorIQ P5 communications processor integrating a single PowerPC e5500 64-bit core running at 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. It is a member of the NXP QorIQ P5 family targeting networking, telecom, and embedded control workloads. A microprocessor (MPU) is an integrated circuit that contains the complete central processing unit of a computer on a single die, including the arithmetic logic unit, control unit, registers, cache, and memory management. MPUs belong to the semiconductor family and, in embedded systems, sit at the top of the compute hierarchy above microcontrollers (MCUs) and DSPs. The QorIQ P5 series is NXP's mid-range communications processor line, derived from the PowerPC e500/e5500 architecture and optimized for deterministic packet processing and low-power operation in routers, switches, and industrial gateways. Key features of the P5010NSN1TNB557 include the single e5500 core at 2.0 GHz, integrated L1/L2 caches, hardware acceleration engines for cryptography and pattern matching, dual 10 Gigabit Ethernet controllers, multiple lower-speed Ethernet MACs, DDR3/DDR3L memory controller with ECC support, PCI Express Gen 2 interfaces, and a SerDes-based interconnect fabric. The 1295-ball FCPBGA package exposes the full set of peripheral interfaces while providing thermal performance suitable for industrial temperature operation. Architecturally, the device leverages the e5500 superscalar core with out-of-order execution and a high-frequency system bus, paired with the Data Path Acceleration Architecture (DPAA) for packet parsing and queue management. This combination enables line-rate processing at 10 Gbps while keeping CPU load low, a critical advantage in software-defined networking and network function virtualization platforms. Typical applications include enterprise routers, Ethernet switches, network attached storage controllers, industrial control gateways, and aerospace/defense embedded compute modules. The QorIQ P5 platform enjoys long-term software support via NXP's Linux BSP and is widely deployed in long-life telecom and industrial programs. When designing with this device, plan thermal management around the 37.5x37.5 mm BGA, validate the SerDes reference clock topology against the manufacturer reference design, and confirm DDR3L signal integrity with the supplied IBIS models before committing to PCB layout. This page consolidates distributor pricing, drop-in package alternatives, and engineering guidance for the P5010NSN1TNB557 in a form that supplements the official NXP datasheet.

견적 요청 문의하기
P5010NSN7MMB557 - QorIQ P5 64-bit Power Arch SoC 1.2GHz | NXP
P5010NSN7MMB557

P5010NSN7MMB557 - QorIQ P5 64-bit Power Arch SoC 1.2GHz | NXP

The NXP (formerly Freescale) P5010NSN7MMB557 is a QorIQ P5010 64-bit Power Architecture system-on-chip (SoC) microprocessor with a single e5500 core running up to 1.2 GHz, housed in a 1295-ball FCPBGA (37.5 mm x 37.5 mm) package. The device integrates the high-performance e5500 PowerPC core, large caches, hardware virtualization primitives, and a rich set of high-speed peripherals including multiple Gigabit Ethernet controllers, PCIe, SATA, and USB interfaces. Operating at 1.2 GHz with low power consumption relative to its performance class, it targets networking, industrial control, and embedded compute applications. A QorIQ P-series processor is a multi-core/multi-thread Power Architecture SoC designed for intelligent networking, secure compute, and embedded workloads. It sits within the hierarchy of embedded processors (PowerPC e500/e5500 family -> QorIQ communications platform -> NXP networking SoCs), combining CPU cores, cache hierarchy, memory controllers, packet processing accelerators, and security engines on a single die. The SoC e5500 core executes the Power ISA 2.06 and includes a double-precision floating point engine, enabling efficient signal-processing and control-plane workloads. Key differentiating features of the P5010 family include single-core e5500 operation at up to 1.2 GHz, integrated 1 MB L2 cache, the Data Path Acceleration Architecture (DPAA) for packet parsing and classification, Trust Architecture security, and DDR3 memory controller support. The 37.5 mm x 37.5 mm FCPBGA-1295 package supports the high pin density required for parallel SerDes lanes and multiple memory/IO interfaces. Per the manufacturer datasheet, the device operates from industrial-grade temperature ranges, and the SoC is offered in multiple speed grades for design flexibility. Typical applications include enterprise and industrial routers, secure gateways, network-attached storage (NAS), industrial automation controllers, single-board compute platforms, and secure appliance designs. The combination of low power envelope and integrated peripherals eliminates the need for companion communication ASICs in many designs. When designing with the FCPBGA-1295, ensure proper PCB stack-up, ball pitch, and thermal management — these high-density BGAs demand controlled-impedance routing, microvia technology, and a substrate or heatsink to dissipate thermal load under sustained operation. This page synthesizes distributor pricing, drop-in alternative notes, and practical design considerations beyond the manufacturer datasheet.

견적 요청 문의하기
P5010NSN7TNB557 - QorIQ P5 PowerPC SoC, 2.0 GHz, 64-bit | NXP
P5010NSN7TNB557

P5010NSN7TNB557 - QorIQ P5 PowerPC SoC, 2.0 GHz, 64-bit | NXP

The NXP P5010NSN7TNB557 is a QorIQ P5 series communications processor built on the PowerPC e5500 64-bit core architecture, operating up to 2.0 GHz with a single-core configuration, housed in a 1295-pin FCPBGA (37.5x37.5 mm) package. It integrates high-performance data-path acceleration, advanced memory controllers (DDR3/DDR3L with ECC), and multiple high-speed SerDes lanes for networking infrastructure. A communications SoC (System-on-Chip) is a highly integrated processor that combines CPU cores, memory controllers, packet-processing accelerators, and a wide range of I/O interfaces into a single die. Within the broader taxonomy, the QorIQ P5 sits in the embedded networking processor category, descending from NXP/Freescale's long-running PowerQUICC and QorIQ families. QorIQ parts are widely used in routers, switches, base stations, and industrial control equipment where deterministic throughput and low latency matter more than raw clock speed. Key features include a 64-bit e5500 core with dual-issue superscalar pipeline, hardware-based pattern matching and encryption acceleration engines, integrated 10 GbE and 1 GbE Ethernet MACs, PCI Express Gen 2 controllers, and support for up to 32 GB of DDR3/DDR3L memory with ECC. The device supports hardware virtualization and Trust Architecture security features. Thermal design power is in the range of typical 30 W-class high-performance networking SoCs and requires a heatsink and airflow in production. Typical applications include enterprise routers and switches, wireless base-station baseband processing, network-attached storage controllers, industrial control systems, and secure networking appliances. Its combination of PowerPC compatibility, hardware cryptography, and high-throughput packet engines makes it well suited to legacy embedded designs and new secure infrastructure builds. The integrated peripherals remove the need for many external bridge chips, simplifying BOM and reducing board complexity. When designing with this device, pay attention to power-sequencing, the SerDes reference clock topology, and DDR3 routing - signal-integrity issues are common failure points. The 1295-ball FCPBGA package requires multi-layer PCB stack-up with microvia technology and a controlled-impedance layout. JTAG debug access must be brought out for production programming. Thermal dissipation must be addressed via heatsink plus airflow, as the package is large-format flip-chip BGA. This page synthesizes distributor inventory, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P5010NSN7VNB - QorIQ P5 64-bit SoC, 2.0 GHz, 1295-FCBGA | NXP
P5010NSN7VNB

P5010NSN7VNB - QorIQ P5 64-bit SoC, 2.0 GHz, 1295-FCBGA | NXP

The NXP P5010NSN7VNB is a single-core QorIQ P5 series communications processor built on 64-bit Power Architecture e5500 core technology, operating at up to 2.0 GHz and housed in a 1295-ball FC-BGA (FCPBGA) package measuring 37.5 mm × 37.5 mm. A QorIQ communications processor is a system-on-chip (SoC) designed for high-performance networking and control-plane workloads, integrating CPU cores, cache hierarchy, memory controllers, packet-processing acceleration, and multiple high-speed serial interfaces into a single device. The P5 platform sits within NXP's broader QorIQ family hierarchy (P1 -> P2 -> P3 -> P4 -> P5 -> P10), positioned as a mid-to-high-end 64-bit Power Architecture SoC for control plane and computer applications. Key features include 64-bit Power Architecture e5500 core, 2.0 GHz maximum frequency, DDR3 memory controller with ECC, integrated hardware acceleration for packet parsing and classification, and high-bandwidth peripheral interfaces including PCIe, Gigabit Ethernet, and Serial RapidIO (SRIO). The 1295-ball FC-BGA exposes the full peripheral set and address/data buses needed for embedded networking designs. Architecturally, the device combines an out-of-order e5500 core with platform-wide coherency fabric, large on-chip caches, dedicated SEC (security engine) block, and pattern-matching engines for accelerated packet inspection. Per-cycle efficiency enables high single-threaded control-plane performance at relatively modest power envelopes compared with multi-core variants. Typical applications include network routers and switches, control-plane processing, base-station equipment, industrial networking appliances, and embedded computing platforms requiring deterministic single-threaded 64-bit performance with hardware-accelerated I/O. When designing with the P5010, allocate a multi-layer PCB with matched-impedance routing for DDR3, PCIe, SRIO, and SerDes lanes, and follow NXP's reference board layout and power-sequencing guidelines to achieve the rated 2.0 GHz. The hardware acceleration blocks should be initialized per reference manual to maximize packet throughput. This page consolidates NXP product, distributor pricing, and lifecycle data with cross-reference alternatives and design notes not found in the standalone QorIQ P5 reference manual.

견적 요청 문의하기
P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking
P5010NXE1QMB

P5010NXE1QMB - QorIQ P5 1.6GHz e5500 SoC | NXP | Networking

The NXP P5010NXE1QMB is a single-core 64-bit Power Architecture system-on-chip (SoC) from the QorIQ P5 family, built on the e5500 core and offered in a 1295-ball FC-PBGA package with 37.5 mm x 37.5 mm body. It integrates a 1.6 GHz (with 2.0 GHz turbo) CPU, DDR3 memory controller, PCIe, Serial RapidIO (SRIO), Gigabit Ethernet, security engine, and pattern-matching hardware acceleration, with an industrial-grade operating temperature range of -40C to +105C. What is a QorIQ SoC? QorIQ is NXP's communications-platform processor family, positioned at the boundary between general-purpose microprocessors and dedicated network processors. The hierarchy is: embedded CPU -> Power Architecture -> QorIQ SoC -> multicore communications platform. QorIQ devices are used to offload packet processing, security, and traffic management from application CPUs in routers, switches, base stations, and industrial gateways. The P5010 belongs to the P5 series, focusing on single- and dual-core networking workloads. Key features include a single e5500 core with 64-bit Power Architecture instruction set, dual-issue superscalar pipeline, integrated DDR3/3L controller with ECC up to 1.33 GT/s, and hardware accelerators for packet classification, encryption, and regular-expression matching. The SoC also integrates multiple Gigabit Ethernet interfaces, multiple PCIe Gen2 lanes, two SRIO ports, four UARTs, two I2C, and an SPI interface, eliminating the need for external bridges. The P5010NXE1QMB is fabricated in a 45 nm CMOS process and powered from a 1.1 V core rail, making it suitable for power-constrained appliance designs. The 'NXE1QMB' suffix indicates an extended-temperature (NX) industrial SKU with security engine (E1) and revision QMB (revision 2.0). Typical applications include industrial networking gateways, edge routers, LTE small-cell base stations, defense and aerospace packet processors, and secure industrial IoT gateways. The integrated SEC engine supports IPSec, SSL/TLS, and SRTP, enabling secure VPN termination at the network edge. When designing with this part, ensure the PCB has sufficient microvia escape routing for the 1.00 mm pitch BGA, plan thermal coupling via a heatsink interface lid, and validate the DDR3 fly-by topology with the IBIS models in the hardware design guide. Extensive pre-silicon simulation is recommended because the BGA rework cost is high. This page synthesizes distributor availability, drop-in same-family alternatives, and design notes not found in any single manufacturer datasheet.

견적 요청 문의하기
P5010NXE1QMB557 - QorIQ P5010 e5500 SoC 1.6GHz FC-PBGA-1295 | NXP
P5010NXE1QMB557

P5010NXE1QMB557 - QorIQ P5010 e5500 SoC 1.6GHz FC-PBGA-1295 | NXP

The NXP Semiconductors P5010NXE1QMB557 is a QorIQ P5010 communications processor based on the 64-bit Power Architecture e5500 core, delivered as a single-core variant in a 1295-ball FC-PBGA (37.5x37.5 mm) package. It operates at frequencies up to 1.6 GHz with 1600/1200 MHz r2.0 silicon, integrates DDR3/3L memory controllers with ECC, and exposes high-speed serial interfaces including PCIe, Serial RapidIO (SRIO), and Gigabit Ethernet. A communications processor (often called an SoC or network processor) is a highly integrated silicon device that combines one or more CPU cores, memory controllers, packet-processing accelerators, and multiple industry-standard I/O interfaces in a single package. The QorIQ family sits between general-purpose microcontrollers and full server CPUs in the embedded computing hierarchy: QorIQ P5 -> e5500-based communications SoC -> Power Architecture networking SoC -> NXP embedded processor portfolio. These devices are engineered for wire-line and wireless infrastructure where deterministic throughput, deep packet inspection, and reliable high-bandwidth I/O are mandatory. Key specifications include a single e5500 core running up to 1.6 GHz, dual-core coherent fabric interconnect on P5020 sibling, 32 KB I-cache and 32 KB D-cache per core, large platform caches, hardware acceleration engines, integrated SEC (Security) engine, and an extended operating temperature range of -40C to +105C. The 1295-terminal FC-PBGA package uses a 1.00 mm ball pitch and includes boundary-scan capability for production test. The architecture leverages Power Architecture e5500 with hardware-managed coherency, integrated memory controller supporting DDR3/DDR3L with ECC, and on-die SerDes lanes that fan out to multiple interface standards. Hardware-acceleration engines offload typical packet-processing tasks, freeing the CPU for control-plane and exception handling. The SEC block accelerates cryptographic workloads including IPsec and bulk-data ciphers. Typical applications include enterprise routers and switches, wireless base stations (LTE/eNodeB), network-attached storage controllers, industrial control planes, defense and aerospace communications, and single-board compute modules for line-rate packet processing. The extended temperature range qualifies the part for outdoor industrial and telco OLT/ONU deployments. When designing with this device, ensure the PCB provides the full 37.5x37.5 mm FC-PBGA land pattern with microvia stack-up, since 1.00 mm pitch BGA assembly typically requires laser-drilled vias. Power sequencing on the multiple voltage rails must follow the QorIQ P5010 reference board design guide to avoid latch-up. The part is supplied on tape-and-reel or tray; production programming should use the NXP CodeWarrior or QorIQ SDK toolchains. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P5010NXE1TNB - QorIQ 64-Bit Power Arch SoC 2.0GHz | NXP
P5010NXE1TNB

P5010NXE1TNB - QorIQ 64-Bit Power Arch SoC 2.0GHz | NXP

NXP P5010NXE1TNB is a QorIQ P5 series 64-bit Power Architecture system-on-chip with a single e5500 core running at 2.0 GHz, housed in a 1295-pin FCPBGA (37.5 x 37.5 mm) package. It integrates DDR3/3L memory controller, PCIe, Gigabit Ethernet, hardware acceleration, SEC (security engine), and serial RapidIO (SRIO), operating from -40C to +105C for extended-temperature applications. A microprocessor (MPU) is an integrated circuit that executes instructions fetched from memory and serves as the central processing unit of an embedded system. Within the MPU taxonomy, the P5010 belongs to the Power Architecture e5500 family, which in turn fits into the broader categories of embedded processor -> application-specific SoC -> communications processor. This hierarchy matters because QorIQ SoCs target networking, telecom, and industrial infrastructure rather than general-purpose PCs. Key features of the P5010NXE1TNB include 64-bit Power Architecture e5500 processing at 2.0 GHz with out-of-order execution, integrated DDR3/DDR3L memory controller with ECC support, multiple high-speed serial interfaces (PCIe, SRIO, GbE), hardware-accelerated cryptography via SEC, and an extended operating temperature range of -40C to +105C. The -NXE1 suffix specifically denotes the extended-temperature grade with encryption enabled, while the TNB suffix indicates a specific speed/revision stepping per NXP ordering information. Architecturally, the e5500 core combines dual-issue out-of-order pipelines with a high-bandwidth CoreNet coherency fabric, allowing tight integration with companion QorIQ chips for symmetric multiprocessing. Compared with the dual-core P5020, the P5010 is the single-core variant with lower power dissipation at the cost of throughput in heavily multi-threaded workloads. Typical applications for the P5010NXE1TNB include wired and wireless base station controllers, industrial routers and gateways, network-attached storage (NAS), telecom edge platforms, and secure communications appliances. Engineers select this part when extended-temperature operation, integrated hardware security, and the QorIQ ecosystem (Linux BSP, CodeWarrior tools) are required in a single SoC. When designing with the P5010NXE1TNB, plan the PCB layout around the 37.5 mm FCPBGA substrate first - a 6+ layer board with HDI microvias is typically required. Pay close attention to DDR3 trace matching, SerDes reference clock jitter, and thermal dissipation: even at single-core the SoC can dissipate in the high single-digit watts under sustained load, demanding a solid ground/power plane strategy. This page consolidates distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
P5010NXE7QMB - QorIQ P5 64-bit SoC, 2.0GHz, FCPBGA-1295 | NXP
P5010NXE7QMB

P5010NXE7QMB - QorIQ P5 64-bit SoC, 2.0GHz, FCPBGA-1295 | NXP

The NXP P5010NXE7QMB is a single-core 64-bit Power Architecture QorIQ P5 communications processor, integrating one e5500 core clocked up to 2.0 GHz in a 1295-ball FCPBGA (37.5x37.5 mm) package. It delivers 1.6 GHz base operation per the datasheet while supporting core frequency scaling, with on-die DDR3/3L controller, multiple PCIe Gen2 controllers, Gigabit Ethernet, Serial RapidIO (SRIO), hardware acceleration, and integrated SEC cryptography. The device is rated for the extended industrial temperature range of -40C to +105C. A QorIQ communications processor is a system-on-chip (SoC) designed for networking and embedded infrastructure. It sits within the taxonomy: communications processor -> multicore SoC -> Power Architecture microprocessor -> embedded processor -> semiconductor IC. QorIQ P-series parts replaced the older PowerQUICC family and added multicore Power Architecture cores with integrated high-speed I/O, displacing many discrete components previously required for routing, switching, and protocol acceleration. Key features of the P5010 include a 64-bit e5500 core with hardware hypervisor and virtualization support, a high-bandwidth DDR3/DDR3L controller with ECC, four 10 Gigabit Ethernet controllers, two 10GbE plus five 1GbE ports, integrated security engine (SEC) for IPsec, SSL/TLS, and SRTP, two PCI Express Gen2 controllers, two Serial RapidIO v2.1 interfaces, and four multi-protocol serdes lanes. The platform is engineered for energy-efficient throughput in fanless networking appliances. Architecturally, the P5010 pairs an out-of-order e5500 core with the CoreNet coherency fabric, an integrated memory controller supporting up to 64-bit DDR3, and a Data Path Acceleration Architecture (DPAA) for queue management and cryptography. Compared to previous PowerQUICC III devices, the P5010 improves IPC by approximately 2x while reducing power per MHz, allowing higher aggregate throughput in the same thermal envelope. Typical applications include industrial routers, network-attached storage controllers, secure VPN gateways, factory automation controllers with deterministic Ethernet, single-board computers for aerospace/defense, and software-defined networking (SDN) edge nodes. The -40C to +105C industrial temperature grade extends suitability to outdoor, vehicular, and industrial cabinet deployments where commercial-grade parts would not survive. When designing with the P5010, plan for the FC-PBGA1295 substrate thermal dissipation; a multi-layer PCB with internal copper planes and a heat spreader is recommended for sustained 2.0 GHz operation. DDR3 routing must follow length-matched, impedance-controlled guidelines, and the SEC engine requires key provisioning via the secure boot flow. This page synthesizes distributor pricing, drop-in FCPBGA-1295 alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster design-in and sourcing decisions for engineers evaluating the QorIQ P5 family.

견적 요청 문의하기
P5010NXE7VNB - QorIQ 64-Bit Power Arch SoC, 2GHz | NXP
P5010NXE7VNB

P5010NXE7VNB - QorIQ 64-Bit Power Arch SoC, 2GHz | NXP

The NXP P5010NXE7VNB is a QorIQ P5 series 64-bit multicore SoC built on the Power Architecture e5500 core, delivering a single-core 2.0 GHz integrated microprocessor for high-performance networking, industrial control, and embedded compute applications. Housed in a 1295-pin FCPBGA (37.5x37.5 mm), it integrates DDR3/3L memory controllers with ECC, PCI Express Gen 2/3 lanes, multiple Gigabit Ethernet MACs, Serial RapidIO (SRIO), hardware acceleration, and SEC (security engine) crypto blocks, making it a complete system-on-chip for line-card and control-plane designs. A System-on-Chip (SoC) is a single silicon die that combines a CPU complex, memory controllers, high-speed serial I/O, platform glue logic, and security engines - replacing what traditionally required a separate MPU, northbridge, southbridge, and PHY. The QorIQ P5 family sits in NXP's high-end communications processor hierarchy: e5500 core -> P5010/P5020 SoC -> QorIQ P-series -> Power Architecture networking portfolio. By collapsing these functions onto one die, the P5010NXE7VNB simplifies board layout, lowers BOM cost, and reduces typical line-card power versus a multi-chip equivalent. Key features include a single e5500 64-bit core running at up to 2.0 GHz, dual DDR3/DDR3L controllers with 64-bit + ECC support up to 1866 MT/s, integrated 10GbE-aware Ethernet MACs, hardware pattern-matching and SEC crypto accelerators, and an extended operating temperature range of 0C to 105C. The 1295-ball FCPBGA exposes every high-speed SerDes lane and is engineered for top-side thermal management. Technically the e5500 core introduces out-of-order execution, hypervisor-aware virtualization, and AltiVec-compatible SIMD, paired with a coherent fabric that links the core, accelerator engines, and I/O controllers. Compared with discrete CPU-plus-chipset designs, the integrated I/O offload engines and SEC engine reduce host CPU overhead for encryption, deep-packet inspection, and queue management workloads typical of enterprise networking. The P5010NXE7VNB fits NGFW/UTM appliances, industrial control and energy-management gateways, wireless baseband controllers, single-board compute modules, network attached storage controllers, and defense/aerospace secure communications. In each of these, the integrated accelerator engines let the main core focus on control-plane work while bulk I/O and crypto tasks are offloaded on-die. When designing the board, pay close attention to the multi-rail power-sequencing requirement and to the high-density 1295-ball BGA fan-out, which typically needs microvia HDI PCB technology. Pair the DDR3 controllers with matched-impedance fly-by routing for signal integrity at 1866 MT/s.

견적 요청 문의하기
P5010NXN1QMB557 - QorIQ P5 2GHz 64-Bit MPU | NXP 1295-FCPBGA
P5010NXN1QMB557

P5010NXN1QMB557 - QorIQ P5 2GHz 64-Bit MPU | NXP 1295-FCPBGA

The NXP (formerly Freescale) P5010NXN1QMB557 is a QorIQ P5 series 64-bit PowerPC e5500 microprocessor built for high-performance embedded networking, delivering up to 2 GHz core frequency in a 1295-ball FCPBGA (37.5 x 37.5 mm) package with 1.00 mm ball pitch. The part integrates a single e5500 core, 64-bit external data bus, integrated L1/L2 cache, and hardware acceleration blocks commonly required for control-plane and data-plane packet processing. A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, register file, cache hierarchy, and memory management unit on one die. The QorIQ P5 family belongs to NXP's communications processor portfolio, sitting between the low-power QorIQ LS series and the high-end P5020/P5040 multi-core devices; within the embedded taxonomy it is classified as an applications/network processor (MPU) rather than a microcontroller (MCU), because it requires external DDR memory and boots from a separate NOR/NAND flash. Key features highlighted in distributor and OEM listings include 2.0 GHz maximum core frequency, 1-core e5500 64-bit architecture, 1295-terminal PBGA package, RoHS-compliant lead-free construction, and CMOS low-power design with low-power mode support. Compared to the dual-core P5020NXN1QMB, the P5010 drops one core but retains the same FCPBGA-1295 footprint, simplifying thermal layout for designs that need only single-thread throughput. The e5500 core implements the Power Architecture Book III-E instruction set with hypervisor and virtualization support, and pairs with on-chip SEC 4.0 security engine, RAID-5/RAID-6 XOR acceleration, and dual DDR3/DDR3L controllers with ECC. This hardware integration allows line-rate processing of IPSec, SR-IOV, and quality-of-service workloads without burdening the host CPU. Typical applications for the P5010NXN1QMB557 include industrial control routers, enterprise branch-office gateways, single-board computers for telecom, network-attached storage controllers, and aerospace/defense secure embedded platforms. Its wide operating temperature range and ECC memory support also make it well suited for ruggedized military and avionics systems requiring deterministic performance under vibration. When designing with this part, plan the PCB for high-speed DDR3 routing with length-matched address/command traces and 100-ohm differential impedance for SerDes lanes. The 37.5 x 37.5 mm FCPBGA package requires a minimum 8-layer stack-up with stitched ground vias under the thermal pad; without adequate cooling, the 2 GHz core will thermally throttle above 95 C junction temperature. This page synthesizes distributor pricing, FCPBGA-1295 package details, and same-family QorIQ alternatives not all available in a single OEM datasheet, helping engineers source and substitute the P5010NXN1QMB557 for new designs and legacy refresh projects.

견적 요청 문의하기
P5010NXN1TNB - QorIQ P5 SoC, e5500 1-Core 2GHz, 1295-FCBGA | NXP
P5010NXN1TNB

P5010NXN1TNB - QorIQ P5 SoC, e5500 1-Core 2GHz, 1295-FCBGA | NXP

The NXP P5010NXN1TNB is a single-core QorIQ P5 communications processor based on the 64-bit Power Architecture e5500 core, running up to 2.0 GHz and housed in a 1295-ball FCBGA (37.5 x 37.5 mm) package. It integrates the e5500 core with on-chip 32 KB I-cache and D-cache per core, a 512 KB shared L2 cache, hardware-accelerated pattern matching, and a rich high-speed I/O subsystem including DDR3/3L controllers (with ECC), PCI Express Gen 2.0, Serial RapidIO 2.0, multiple Gigabit Ethernet interfaces (10/100/1000 MACs), and USB 2.0. The part is specified for the industrial extended temperature range of -40C to +105C and targets embedded networking, control-plane processing, and secure gateway designs. What is a QorIQ communications processor? QorIQ is NXP's family of multi-core 64-bit Power Architecture SoCs optimized for networking and industrial control. They sit above standard microcontrollers (MCU) in the embedded-processing hierarchy (MPU > MCU) and integrate a CPU complex (e5500/e6500 cores with private L1 and shared L2/L3 caches), a platform-aware I/O fabric (DDR controllers with ECC, packet-processing accelerators, SEC engines), and high-speed serial I/O (PCIe, SRIO, 10 GbE MACs) on a single die. They are typically deployed where deterministic performance, hardware encryption, and multi-protocol I/O must coexist on one chip. Key features of the P5010NXN1TNB include: hardware-accelerated packet processing, integrated SEC 4.x security engine for IPsec/SSL/TLS, IEEE 1588 timestamping on Ethernet interfaces, four 10/100/1000 Ethernet MACs (RGMII/SGMII), two PCI Express Gen 2.0 controllers, a Serial RapidIO 2.0 port, a 64-bit DDR3/3L controller with ECC supporting up to 1866 MT/s, eight TDM/HDLC channels, an enhanced host bridge, and platform-level trust architecture (PAMU, LPU). The SoC uses a 0.9 V core supply with multiple I/O power domains. Technically, the e5500 core supports the Power ISA 2.06, including virtualization, large-page support (4 KB/64 KB/16 MB) and out-of-order execution. The integrated SEC 4.0/4.4 engine handles bulk cryptography (AES, 3DES, Kasumi, Snow 3G, SHA-1/256) without CPU intervention, off-loading the host core. A high-bandwidth coherent fabric links the cores, L2 cache and I/O controllers, allowing line-rate packet classification together with control-plane execution. Typical applications include industrial networking and IoT gateways, Layer 2/3 Ethernet switches, control-plane processors in routers and base stations, defense/aerospace packet processing, secure VPN appliances, and factory-floor protocol gateways (PROFINET, EtherCAT, TSN). The extended temperature range (NXN suffix) and absence of encryption restrictions (NXN rather than NXE/TXN) make the P5010NXN1TNB well suited to industrial rather than export-controlled aerospace systems. When designing with this part, allocate 6-8 PCB layers to fan out the 37.5 mm BGA, provide a low-impedance voltage regulator for the 0.9 V core rail, and follow NXP's AN4765 layout guide for the FCBGA to maintain DDR3 signal integrity at 1866 MT/s. Always program the trust-architecture unit (PAMU, LPU) before booting the OS to prevent unauthorized bus mastering. This page synthesizes distributor pricing, drop-in alternate QorIQ siblings, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
P5010NXN1TNB557 - QorIQ P5 e5500 64-bit 2.0GHz MPU, 1295-FCPBGA | NXP
P5010NXN1TNB557

P5010NXN1TNB557 - QorIQ P5 e5500 64-bit 2.0GHz MPU, 1295-FCPBGA | NXP

The NXP P5010NXN1TNB557 is a QorIQ P5 series communications microprocessor based on the PowerPC e5500 core architecture, delivering 2.0 GHz single-core 64-bit performance in a 1295-ball FCPBGA package (37.5 x 37.5 mm). Per the Freescale/NXP manufacturer part description, this device is positioned as a high-performance integrated communications processor for networking and embedded infrastructure. A QorIQ communications processor is a multi-core/multi-threaded system-on-chip designed for wired and wireless networking infrastructure, combining CPU cores, high-speed serial interfaces, packet-processing accelerators and memory controllers on a single die. It belongs to the Power architecture lineage (PowerPC e5500), well established in routers, switches and base stations where deterministic throughput and protocol offload are required. The P5 tier sits between the lower-end P1/P2 and the higher-end P4/P4xxx families in the QorIQ product ladder. Key features of the P5010 family include a 64-bit e5500 core running up to 2.0 GHz, integrated L1/L2 caches, dual DDR3 memory controllers with ECC support, multiple high-speed SerDes lanes (typical QorIQ P5 configurations include 10-Gigabit Ethernet MACs), and advanced power management. Security features commonly integrated include SEC 4.0+ engines for cryptography and protocol acceleration, suitable for IPsec, SSL/TLS and trusted boot scenarios. Typical applications for this MPN include enterprise and SMB routers, network-attached storage controllers, wireless LAN controllers, industrial gateways, and secure communication appliances. The 1295-ball FCPBGA exposes a large I/O budget including multiple SerDes lanes and parallel I/O, enabling single-chip designs that previously required companion ASICs. Designers should consult the QorIQ P5010 Reference Manual and hardware design guidelines for thermal management. The 37.5 mm BGA requires a multi-layer PCB with controlled-impedance SerDes routing; a heatsink is required at full 2.0 GHz across industrial temperature. This page synthesizes distributor pricing, package/footprint details, and engineering guidance that helps procurement and design teams select or substitute the P5010NXN1TNB557 with confidence.

견적 요청 문의하기
P5020NSE1VNB - QorIQ Dual-Core 2GHz SoC | NXP | FCPBGA-1295
P5020NSE1VNB

P5020NSE1VNB - QorIQ Dual-Core 2GHz SoC | NXP | FCPBGA-1295

The NXP (formerly Freescale) P5020NSE1VNB is a dual-core 64-bit Power Architecture SoC from the QorIQ P5 platform, featuring two e5500 cores running at up to 2.0 GHz, integrated DDR3/DDR3L memory controllers, and a high-bandwidth datapath fabric that delivers multi-Gbps throughput for embedded compute workloads. Housed in a 1295-ball FCPBGA (37.5x37.5 mm) package, it combines two superscalar e5500 cores, hardware-accelerated security (SEC 4.2), 10 Gigabit Ethernet, PCIe, Serial RapidIO (SRIO) and a 64-bit DDR3/DDR3L controller on a single chip. A QorIQ P-series SoC is a multiprocessor system-on-chip aimed at networking, telecom, military/aerospace and industrial control applications where deterministic performance and high-throughput packet processing are required. QorIQ sits within the broader hierarchy of communications processors, which are themselves a branch of embedded microprocessors and ultimately fall under the semiconductor / integrated-circuit taxonomy. The P5 family - predecessor to P-series QorIQ layers such as P2041 and successor P5040 - is built on Power Architecture technology and is widely used in software-defined networking, secure routing, base-station processing and data-plane accelerators. Key engineering features include dual e5500 cores at 2.0 GHz, 64-bit datapath fabric, integrated SEC 4.2 for IPsec/SSL acceleration, support for DDR3/DDR3L with ECC, multiple SerDes lanes for PCIe and SRIO, gigabit Ethernet interfaces, and a standard temperature grade of 0 to 105 C. The device integrates platform-friendly peripherals such as I2C, SPI, UART and GPIO controllers, simplifying board design for fan-out platforms. The P5020's architecture centers on an on-chip fabric that lets the two cores coherently share L2 cache and main memory, while dedicated engines accelerate cryptography and pattern matching. Manufacturing on a low-power CMOS process yields predictable thermal behavior suitable for fan-less or limited-airflow enclosures, though the 1295-ball FCBGA still demands a well-designed PCB stackup and thermal solution to keep junction temperature within the 105 C ceiling. Typical applications include enterprise and edge routers, network security appliances with hardware IPsec offload, software-defined radio baseband, industrial control and machine vision controllers, and ruggedized military communications gear. The P5020 is especially well suited to designs that need multi-gigabit throughput with hardware-accelerated crypto and deterministic latency on a single SoC. When designing with the P5020NSE1VNB, allocate generous PCB layers for the FCPBGA breakout, follow NXP's hardware-design guide for power-rail decoupling, and design the thermal solution (heatsink, airflow or cold plate) so that worst-case Tj stays below 105 C. Code should target the e5500 Power Architecture ISA; the CodeWarrior and Linux BSP ecosystems are mature for this family. This page synthesizes distributor pricing, exact drop-in same-package alternatives, and practical thermal/layout guidance drawn from NXP reference documentation - engineering context you will not find on a bare DigiKey/Mouser listing.

견적 요청 문의하기
P5020NSE7MMB557 - QorIQ P5 Dual-Core 1.2GHz SoC | NXP
P5020NSE7MMB557

P5020NSE7MMB557 - QorIQ P5 Dual-Core 1.2GHz SoC | NXP

The NXP Semiconductors (formerly Freescale) P5020NSE7MMB557 is a QorIQ P5 series 64-bit dual-core microprocessor built on Power Architecture e5500 technology, operating at 1.2 GHz and packaged in a 1295-pin FCPBGA (37.5 x 37.5 mm). The SoC integrates dual e5500 cores with hardware acceleration, security, and a rich high-speed I/O subsystem for embedded networking and industrial computing. A microprocessor (MPU) is an integrated circuit that contains one or more processor cores, caches, memory controllers, and peripheral interfaces on a single die. The QorIQ family sits in NXP's high-performance embedded MPU portfolio, positioning the P5020 as a 64-bit multi-core solution for applications that demand more processing headroom than microcontrollers (MCUs) offer, but with tighter power and integration than discrete server CPUs. The P5 tier specifically targets intelligent networking, industrial control, and defense/aerospace workloads. Key features include a 64-bit e5500 dual-core CPU at up to 2.0 GHz (this SKU ships at 1.2 GHz), an integrated DDR3 memory controller with ECC, hardware acceleration engines for pattern matching and cryptography, and a security engine (SEC). The device also integrates PCI Express Gen 2, Serial RapidIO (SRIO), Gigabit Ethernet MACs, and a high-speed SerDes fabric, enabling single-chip line-card and compute appliance designs. Architecturally, the P5020 uses an SoC-licensed Power Architecture implementation with per-core L1 caches and a shared L2 cache. The hardware acceleration blocks offload cryptography and deep packet inspection from the cores, allowing sustained throughput for control-plane and data-plane workloads. Industrial temperature grade 0 to 105 C is supported for harsh-environment deployments. Typical applications include industrial routers and switches, network-attached storage controllers, defense/aerospace embedded computing, factory automation controllers, and single-board compute modules. The integrated peripherals reduce external component count for compact fanless designs. When designing with this part, allocate sufficient PCB layers (typically 8-10) for the FCPBGA breakout and provide robust power decoupling. Validate thermal envelopes with the manufacturer's reference design, and confirm software support through NXP's Linux BSP and CodeWarrior toolchain. The non-automotive temperature range limits deployment in under-hood automotive use. This page synthesizes distributor pricing, datasheet specifications, drop-in QorIQ alternatives, and practical design notes not consolidated in any single manufacturer document.

견적 요청 문의하기