EP910PC-35 vs EP910PC-15 비교
다음의 상세 나란히 비교: EP910PC-35 제조: Altera 및 EP910PC-15 제조: Altera. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | EP910PC-35 | EP910PC-15 |
|---|---|---|
| 브랜드 | Altera | Altera |
| 카테고리 | FPGA & CPLD | FPGA & CPLD |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $8.70 | $12.80 |
| Family | Classic EPLD | Altera Classic EPLD |
| Device Type | EPLD (Erasable Programmable Logic Device) | — |
| Macrocells | 24 | 24 |
| I/O Pins | 24 | — |
| Dedicated Inputs | 12 | 10 |
| Total Inputs | 36 | — |
| Product Terms | 240 | — |
| Propagation Delay (tPD) | 35 ns | — |
| Maximum Counter Frequency | 37 MHz | — |
| Internal Performance Frequency | 100 MHz | — |
| Technology | CMOS, UV-erasable/OTP | — |
| 공급 전압 | 5 V | — |
| 동작 온도 | [DATA_NEEDED: operating temperature range] | 0C to +70C (commercial) |
| 패키지 | 40-pin PDIP (Plastic DIP) | 24-pin PDIP (PDIP-24, 0.300 inch) |
| 실장 유형 | Through-Hole | Through-Hole |
| Architecture | PAL-type sum-of-products, AND/OR array | — |
| Programming Method | UV-erase (ceramic) / OTP (plastic), A+PLUS / MAX+PLUS tools | Altera Logic Programmer card |
| Compliance / RoHS | [DATA_NEEDED: RoHS status - legacy part] | — |
| Usable Gates | — | 900 |
| Maximum Pin-to-Pin Delay (tpd) | — | 15 ns |
| Counter Frequency (fCNT) | — | 100 MHz |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V (5 V nominal) |
| Supply Current (Icc) | — | 80 mA typical |
| Dedicated I/O Pins | — | 12 |
| Process Technology | — | CMOS, UV-erasable |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status - EP910 is a legacy through-hole part, likely non-RoHS] |
| MSL 레벨 | — | Not applicable (through-hole) |