INA121P vs INA128PA 비교

다음의 상세 나란히 비교: INA121P 제조: Texas Instruments 및 INA128PA 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Texas Instruments
INA128PA INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA ✓ 활성

사양 비교

파라미터 INA121P INA128PA
브랜드 Texas Instruments Texas Instruments
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $5.65 $0.00
Amplifier Type Instrumentation Amplifier (3-op-amp topology) —
Number of Channels 1 —
Input Type FET / CMOS —
Input Bias Current ±4 pA typical —
Input Offset Voltage ±200 µV typical —
Input Offset Drift ±2 µV/°C typical —
Input Voltage Noise Density 20 nV/√Hz at 1 kHz —
대기 전류 ±450 µA typical 700 µA
Common-Mode Rejection Ratio (CMRR) 106 dB minimum —
Bandwidth (-3 dB) 600 kHz at G = 100 —
Nonlinearity Error 0.001% (G = 10) —
Gain Range 1 V/V to 10,000 V/V (single external resistor) 1 to 10,000
Supply Voltage Range ±2.25 V to ±18 V —
Input Protection ±40 V differential and common-mode ±40 V
동작 온도 범위 -40 °C to +85 °C —
패키지 8-Pin PDIP (P) 8-pin PDIP
실장 유형 Through-Hole Through-hole
Slew Rate [DATA_NEEDED: slew rate from datasheet] —
RoHS 상태 Compliant —
Lead-Free Finish Yes (Matte Tin) —
Product Type — Precision instrumentation amplifier
Architecture — Three-op-amp instrumentation amplifier
Number of Circuits — 1 circuit
Common-Mode Rejection Ratio — 130 dB
Minimum Common-Mode Rejection — 120 dB
Maximum Input Offset Voltage — 50 µV
Maximum Input Voltage Drift — 0.5 µV/°C
Maximum Input Bias Current — 5 nA
Supply Range — Up to ±18 V
Gain Setting — Single external resistor
Bandwidth at Gain 100 — 200 kHz
Green Product — Yes
Restricted Substances — No Sb/Br
동작 온도 — -40°C to +85°C

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청