LT1037CP vs LT1037CL 비교
다음의 상세 나란히 비교: LT1037CP 제조: Texas Instruments 및 LT1037CL 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | LT1037CP | LT1037CL |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Unknown |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.00 | $0.00 |
| Product Type | Low-noise, high-speed, precision operational amplifier | Single operational amplifier |
| Number of Amplifiers | 1 amplifier | — |
| Gain-Bandwidth Product | 60 MHz | 60 MHz |
| Slew Rate | 11 V/µs minimum for LT1037 and LT1037A | — |
| Input Noise Density | 2.5 nV/√Hz wideband | — |
| Maximum Equivalent Input Noise Voltage | 3.8 nV/√Hz at 1 kHz | — |
| Low-Frequency Noise | 60 nV peak-to-peak from 0.1 Hz to 10 Hz | — |
| 1/f Corner Frequency | 2 Hz | 2 Hz |
| Input Offset Voltage | 10 µV | — |
| Input Offset Voltage Drift | 0.2 µV/°C | — |
| Common-Mode Rejection | 130 dB | 130 dB |
| Power-Supply Rejection | 130 dB | 130 dB |
| Typical Differential Voltage Gain | 20 V/µV at 25°C, 2 kΩ load, ±12 V | — |
| Differential Gain at 600 Ω Load | 12 V/µV at 25°C, ±10 V | — |
| Stable Closed-Loop Gain | 5 V/V or greater | — |
| 패키지 | 8-pin PDIP | TO-99-8 |
| 실장 유형 | Through-hole | Through-hole |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Amplifier Category | — | Instrumentation, op amp, buffer amp |
| Number of Circuits | — | 1 circuit |
| Wideband Input Noise | — | 2.5 nV/√Hz |
| 0.1 Hz to 10 Hz Peak-to-Peak Noise | — | 60 nV |
| Offset Voltage | — | 10 µV |
| Offset Voltage Drift | — | 0.2 µV/°C |
| Closed-Loop Stability | — | Stable for closed-loop gains of 5 or greater |
| Frequency Response | — | Up to 8 MHz |
| Input Offset Voltage Maximum | — | 110 µV |